I'm currently on the Android N preview. During a call i hear a "Beep Beep" every ten seconds(Sounds like call waiting). Is there a way to stop this sound? I've checked the phone settings and call settings But I don't see anything that addresses this sound. Any one else have this problem or annoyance?
I'm using as daily driver, and I didn't hear that sounds.
rrubio999 said:
I'm using as daily driver, and I didn't hear that sounds.
Click to expand...
Click to collapse
Yes..it's odd. I was on a call..no beeping. Received another call,clicked over..the sound started. I then ended call..called back no sounds. It's random..
Beeping is often a sign that the call is being recorded, no...?
I get the two beeps just before a call is initialised. One low pitch and second higher pitch right after. Usually happens at 2 locations in the City of London. Doesn't happen anywhere else!
Beeps on stock ROM and also on Pure Nexus r22 rom.
So you're not the only one
Had this happen to me for the first time yesterday, after switching from one call to another. It stayed active, even after I hung up both calls and made another one. Fixed on reboot.
BaumerS4 said:
Had this happen to me for the first time yesterday, after switching from one call to another. It stayed active, even after I hung up both calls and made another one. Fixed on reboot.
Click to expand...
Click to collapse
I had multiple calls today with no beeping. Same callers as before. I'm just wondering what causes it. It's more of an annoyance than a problem
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
Hi there,
i own a diamond for a week now and i have two strange problems.
one is, when i receive incoming calls sometimes i cannot hear my dialogue partner but he understands me. until i press one of the volume buttons at the side. i think this does not always happen, but in about one of three calls. i also think this only happens on incoming calls, not when i call.
second is, when i dial a number sometimes i don't hear it ringing. theres absolutely no sound until the called person receives my call. this is not reproducable and happens in about one of four cases. i can call someone and hear it ringing and immediately call again and it doesnt make a sound.
this does not sound like a hardware problem. i have rom 1.37.407.2 installed and i am from germany.
i hope someone can help me, this kinda pisses me off. thanks.
alright then, seems solved. I updated to the latest official Rom.
Anyone else had anything like this:
When the phone first boots up its perfectly fine, calls work both ways, it plays music no problem.
However leave it sitting on the side for 15-20 mins and then get a call, the phone receives it but makes no noise, answer call an the phone doesnt even sound like its picked it up it's just silent, can' hear person, they can't hear you. Same on outbound calls the phone is just dead i cant hear anything an receiver cant hear me. But the phone does no the call is connected as it rumbles when the person answers but i never hear the ringing before that.
Also once it is in this state, got to music on the phone and click play and there is no sound at all!
This has happened even after updating to newer official rom as well.
Any ideas???
Many Thanks
I am having exactly the same problem.... All sound from the phone just stops working, also the alarm, which means I can never trust my phone to wake me up in the mornings!
Another problem with the phone is that when the phone is called it takes a while for the phone to ring. I have tried to call my phone from a landline and it actually rings three times before the diamond makes a noise!
The latest Tweak 2k2 software solves the 3s ring delay problem...
Do you have a link for this?
Thanks
http://www.tweaks2k2.com/
Some users here were also tweaking the registry, but i solved the problem this kind of way...
Just curious...
I've had the phone for just over a week, and have the Kang-O-Rama bundle installed. Overall, it's awesome...
What I have noticed though is that there doesn't appear to be a tone for incoming call waiting. A couple of days ago I noticed I had a missed call/VM after I hung up on my current call. I tested it out by calling a friend and having another friend (who was with me) call me while I was in the call. There was no audible notification while in call.
I then activated the "vibrate incoming call waiting" or whatever option and that appeared to work, but still no tone. And even the vibrate may be hit and miss, as I missed another call today while on a call.
Does the Nexus One not have a call waiting tone? Is it buggy? Is it the CM ROM?
yes I am having same problem but I am using home rom.
I think I have seen this, but not quite what you describe. my phone beeps only the first time for call waiting, then it stops. maybe this is the way its supposed to be cause I like it like that.
Is your in call volume on low and is it enable in the settings? Setting-call settings-additional settings-call waiting checked.
I'll be darn if I can figure out what is going on here.
4.1.2, stock except for custom kernel brick bug prevention.
I've had this rom running since it was released (this is a note international, GBT via amazon, used in the states)
Never had an issue, but I've started to notice a couple missed calls. Today, I saw what was happening.
Incoming calls, the ringer only rings for maybe 1/2 second, phone continues to "ring" but you never hear
anything! It's like it has been silenced as if you quickly pressed a button. That's how it acts without bluetooth.
If I have my bluetooth (jawbone ERA) turned on, SOMETIMES, if the screen is off, it NEVER rings, on the speakerphone
I'm using to dial my Note, I hear it ring 2 times, then go directly to voicemail. Sometimes it does that, sometimes it does
not, otherwise, the phone ringtone plays for a split second, headset continues to ring normally. Screen shows the incoming
call, but no ringtone. I haven't tweaked, installed, updated anything to cause this. Just one day it started doing it.
I'm about to do a clear reset, but it's just a PITA to set it up. Device is going on 18 months old, first issue I've really had
with it other than a bad USB port or a worn battery.
Any clues?
edit: Found the issue...I use call control as a phone number blocker. In settings, I had on for blocked calls, "remove partial ring" turned on. Once that was turned off, everything started working.