Database Develop

[Q] How to take care of power button?

Hi guys! I am buying a Nexus One. I just read about the power button problem. I wanted to know if there is any way that I could take care of my power button so that it does not break. I also wanted to know if there was a possible way of remapping the power button, for example the power button dies out on me, I could use the Volume up button to power on my device (cold boot).

Well that depends if you're running stock ROM or rooting and installing a custom ROM. I'm gonna assume you're gonna root and say to get a ROM with trackball root. This way you can unlock with the trackball and save your power button. You can also get a one of many apps that lets you lock the phone from a homescreen widget.
If you're not planning on rooting you could install GoLocker which would let you unlock with the volume rocker. Think the locking widgets should still work too.
Hope that helps.

I read somewhere that pressing the power button from the side closest to the headphone jack would also prevent damage to it. Is this true? I haven't really gotten my N1 yet so it's kind of hard to visualize how the power button works on it.

Yeah like addam360 stated, I use CM7 ROM with trackball unlock/trackball wake.
Barely use my power button. There's also app like Quickboot which let me reboot or reboot to recovery without having to use the button.
CM7 ROM also have an option to shut down via widget.
As for which side to push I really couldn't tell you.

DashBlacK said:
I read somewhere that pressing the power button from the side closest to the headphone jack would also prevent damage to it. Is this true? I haven't really gotten my N1 yet so it's kind of hard to visualize how the power button works on it.
Click to expand...
Click to collapse
I've had my N1 for over a year with no power button issues - Check out my signature; I did a huge long post explaining my reasoning.

zuberio said:
I've had my N1 for over a year with no power button issues - Check out my signature; I did a huge long post explaining my reasoning.
Click to expand...
Click to collapse
So that's where I got the info of pressing closest to the audio jack. Thanks very much for the info. So what if I were to place a thin piece of paper between the trace and the plastic power button head so that it does not press down on the trace? Do you think this will help preserve the trace?

I have had my nexus one for a year and 8 months, I haven't payed attention to where I click the button and its still working properly.
Sent from my Nexus One using xda premium

msavic6 said:
I have had my nexus one for a year and 8 months, I haven't payed attention to where I click the button and its still working properly.
Click to expand...
Click to collapse
Mine failed around that time. Luckily still under warranty so HTC fixed it. (Audio jack went at same time and fixed also)
Sent from my Nexus One using XDA App

DashBlacK said:
So that's where I got the info of pressing closest to the audio jack. Thanks very much for the info. So what if I were to place a thin piece of paper between the trace and the plastic power button head so that it does not press down on the trace? Do you think this will help preserve the trace?
Click to expand...
Click to collapse
If anything, that would probably push the trace down more every time you pressed the power button. If you really want to try a fix, see about grinding down the part of the power button above the trace - that way you won't accidentally press it on the wrong side.

I'm using an EVO 3d so I don't have insight for the N1 but I do know moving parts break. It's one reason I think slideout keyboards are retarded. But most aosp roms allow trackball wake. Me personally I think my volume down is going out. Scrolling in recovery to my download folder is like 16 presses lol. Lucky for me I can get a new back cover and be back to new.
Sent from my PG86100 using Tapatalk

Power Button isn't responding!

I installed JellyBam recently and the power button was working fine...after a while the power button started working with some difficulty...now i cant lock or unlock and im using the volume wake up setting.
Can anyone tell me how to make the button work again?
I read many threads about similar problems but couldnt find the solution.
Thanks.

Are you sure it isnt related with the button phisically?
Im asking because i never heard of such problem.

Are you having phone earpiece problems?
Try another rom

theaks30 said:
Are you having phone earpiece problems?
Try another rom
Click to expand...
Click to collapse
Yes, when I plug in the headphones they keep on plugging out.

....
i have the same problem, but it's true for all roms that i try.....maybe it's just a hardware problem....
anyways, i suggest remapping the gesture key as the lock button....at least the only problems you'll only have is that you have to do this everytime you flash a rom and that this will not work as the power button; meaning if you shutdown your phone, the only way to turn it on is by connecting it to a power source...
..then again, you can just get it fixed at a shop......
hope i helped a little

[Q] Power Button Not working. Plz help

Okay so my power button just randomly stopped working after some random time. it doesnt work ANYWHERE. to lock my screen, to unlcok my screen, in recovery mode i cant press anything cuase it doesnt WORK. i no its a hardware issue becuase of this. i did google this but found nothing. what can i do to fix it.
i tried a battery pull and putting it back and going to recovery to factory reset but as soon as i put my battery in my phone starts up. i can enter recovery but the power button doesnt work so i cant press anything.
my warranty is over by a long shot ( had it since it released) so cant return it.
any help would be appreciated. all i need is a way to turn my phone on and off nothing about the recovery and stuff. but if you do find someting for it that would be even more amazing.
and has this happened to anyone else, just wondering is all if this is common or rare.
thnx in advance.

it has happened to many captivates. search 'captivate power button' on xda.
What ROM are you running on your phone?
Answer to that question has a lot to do with your next steps for software workaround.
One approach; you could read up on ways to clean the power button and see if that works. Or send it off to mobiletechvideos.com and he will fix it for a reasonable fee.

laughingT said:
it has happened to many captivates. search 'captivate power button' on xda.
What ROM are you running on your phone?
Answer to that question has a lot to do with your next steps for software workaround.
Click to expand...
Click to collapse
i am running Aocp 5 android 4.2.1
hve been running it for a few weeks now and no problem till now

Okay, start by seeing if you can clean the power button, that may fix it for now. Again, search 'captivate power button' to find some threads about ways to clean it.
With the ROM you are running, I believe you have a version of CWM that allows to use the Cappy's dedicated menu keys, menu, home, back and search, to navigate and select recovery items.
Assuming your power key is stuck on, remove the battery, hold the up and down volume buttons and reinsert the battery to get into recovery. This will allow you to test keys, wipe, and any other function in CWM.
With the phone on and fully booted into JB, go find volume rocker wake in the system setting options and make sure it is active. Hitting the up/down key will wake the screen when it sleeps. Add the sleep/lock toggle to your notification bar menu and you have a way to instantly lock the screen without the power key.
If you still have a bad power button stuck in on position, then you will need to take out the battery to turn it off.
Hope this helps.

laughingT said:
With the ROM you are running, I believe you have a version of CWM that allows to use the Cappy's dedicated menu keys, menu, home, back and search, to navigate and select recovery items.
Click to expand...
Click to collapse
Thnx for the help but Which button does what?

Menu = Down. Home = Up. Back arrow = Back. Search = Select.
This is the way it is in KK4 Corn Kernel. Not sure about the recovery in AoCP though... Home may = Select. ??
Sent from my SAMSUNG-SGH-I747 using xda premium

THANK YOU!!!!!!
4-2ndtwin said:
Menu = Down. Home = Up. Back arrow = Back. Search = Select.
This is the way it is in KK4 Corn Kernel. Not sure about the recovery in AoCP though... Home may = Select. ??
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
THANK YOU BOTH (4-2ndtwin AND laughingT) SOOOOO MUCH
IF I HAD THE CHANCE I WOULD DONATE TO YOU BUT I CANT CUZ IM ONLY 14
SRY.

No prob. Glad to help.
Sent from my SAMSUNG-SGH-I747 using xda premium

4-2ndtwin said:
No prob. Glad to help.
Click to expand...
Click to collapse
+1

Now to turn off phone?
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.

Jack Jake said:
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Click to expand...
Click to collapse
Get a app or widget for it.

Jack Jake said:
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Click to expand...
Click to collapse
This is happening because your power button is stuck in the on position. Did you try to clean it as suggested earlier.
BWolf56, I'm not aware of an app or ROM that completely prevents power up on insertion of battery when the power button is stuck on. If there is such an app, I'd like to hear about it. I think maybe the power switch goes to the broadcom power management chip, so I don't understand how the app could work unless the phone never came on at all. SOD symptoms would be the result.

laughingT said:
This is happening because your power button is stuck in the on position. Did you try to clean it as suggested earlier.
BWolf56, I'm not aware of an app or ROM that completely prevents power up on insertion of battery when the power button is stuck on. If there is such an app, I'd like to hear about it. I think maybe the power switch goes to the broadcom power management chip, so I don't understand how the app could work unless the phone never came on at all. SOD symptoms would be the result.
Click to expand...
Click to collapse
Oh that would be impossible, the OS isn't loaded so even less the apps
I was suggesting a app to turn off the phone/lock screen. There are widgets for that in the market.

Jack Jake said:
Okay so my power button just randomly stopped working after some random time.
Click to expand...
Click to collapse
I had a very similar problem with my Epic 4G Touch (Sprint S2) - my phone would randomly reboot, and it kept getting worse and worse. Thought it was the ROM, the overclock, etc. I flashed back to (almost) stock, went back to original clock speeds. Eventually, I noticed that even brushing past the power button would wake the screen, and about 10 seconds later the phone would reboot.
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Several eBay sellers offer the switch you'll need.
(They don't include the skills needed to solder it in place. It's a tiny switch - about 4mm x 2mm x 1.5mm, and you'll need a good quality fine-tipped soldering iron and a steady hand. Do you have a friend who's good at soldering?)

awoolf said:
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Click to expand...
Click to collapse
well thanks for the reply, but i dont need it anymore. my friend conveniently had a GNex (old) and gave it to me as a present. so i dont use my captivate that much anymore.

Can you change the bootloader? - Hard reset no longer working, Any insight?

So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
At first I figured it could be kernel as that is the lowest code that I've knowingly changed.
Changing to back to stock kernel did not fix it.
I thought it could be any sort of thing so I redownloaded the NL 434 firmware and then also universal generic 434 firmware and flashed back to completely stock with flash tool, doing all wipes and excluding nothing.
Neither of those firmwares fixed the issue, the hard reset function still won't work on my device.
Additional info:
Both buttons function fine individually and can see no obvious reason to suspect it's a hardware fault (though see that it is feasible, just less likely).
I can confirm that it was working initially.
I have an unlocked boot loader.
The last time I can remember it functioning was prior to boot loader unlocking - the first thing I flashed after unlock was cm10.1 and I got stuck in sideload mode with no hard reset to get me out lol
Otherwise the device is fully functional. For the time being I am back on KA07 xperia revolution rom, with advanced stock kernel (cwm) from DooMLoRD.
If anyone has any suggestions or insight it would be greatly appreciated if you'd drop a comment :good:
EDIT:
I've restored back to 350 with EMMA, but to no avail . It did however tell me that my boot version is : 1264-2309 S1_Boot_Lagan_1.0_2
Is there anyway to change the bootloader :S

After getting home I tried re-locking the bootloader which didn't work.
really starting to wonder if I should be taking it back in as hardware fault.. wonder how that will go since I unlocked the BL

If anyone would be so kind as to do a quick test for me, would you please be able to go into service mode (open dialer type *#*#7378423#*#*) then go into service tests and select the buttons and switches one (I think that's what it's called )
When you hold down the volume up or down button, is it registering as 1 press, or several, continuous presses?
Cheers

DreadPirateDan said:
If anyone would be so kind as to do a quick test for me, would you please be able to go into service mode (open dialer type *#*#7378423#*#*) then go into service tests and select the buttons and switches one (I think that's what it's called )
When you hold down the volume up or down button, is it registering as 1 press, or several, continuous presses?
Cheers
Click to expand...
Click to collapse
Not entirely sure what you are asking, keyboard and switch, volume up only shows as volume up and volume down as just volume down, regardless if you hold it down or press it over and over again, or if you just press it once. Not sure if I am an idiot, but I couldn't work out how to test the keyboard from there.Although one interesting part is that is states it is not a test for the softkeys, but tests them fine

danw_oz said:
Not entirely sure what you are asking, keyboard and switch, volume up only shows as volume up, regardless if you hold it down or press it over and over again, or if you just press it once. Not sure if I am an idiot, but I couldn't work out how to test the keyboard from there.Although one interesting part is that is states it is not a test for the softkeys, but tests them fine
Click to expand...
Click to collapse
Yeah that was the menu I meant.. couldn't remember lol. Ok so when I would hold down volume up it plays a repetitive tone and the text on screen states "vol up", then "vol up vol up" for the longer I hold it (and the beep/sound keeps replaying... confusing sounding I know
When you hold the volume up botton down, does it just beep once and display vol up (exactly like if you were to press it once and release)?
Basically if I were to press it once, the phone would make a sound and the screen would display "vol up"
If I hold it down however it will register as a new press and the "vol up vol up" texts keeps refreshing as-though it was a new key press.
Also thank you very much for checking it out :victory:

DreadPirateDan said:
Yeah that was the menu I meant.. couldn't remember lol. Ok so when I would hold down volume up it plays a repetitive tone and the text on screen states "vol up", then "vol up vol up" for the longer I hold it (and the beep/sound keeps replaying... confusing sounding I know
When you hold the volume up botton down, does it just beep once and display vol up (exactly like if you were to press it once and release)?
Basically if I were to press it once, the phone would make a sound and the screen would display "vol up"
If I hold it down however it will register as a new press and the "vol up vol up" texts keeps refreshing as-though it was a new key press.
Also thank you very much for checking it out :victory:
Click to expand...
Click to collapse
Yep exactly as you say here.
Volume up once shows just volume up beeps once, twice shows volume up twice and beeps twice . Holding it down beeps over and over again and shows volume up twice.
Pressing volume down once from here (volume up volume up) shows volume up volume down, press volume down once more now shows volume down twice.
Hope this helps

danw_oz said:
Yep exactly as you say here.
Volume up once shows just volume up beeps once, twice shows volume up twice and beeps twice . Holding it down beeps over and over again and shows volume up twice.
Pressing volume down once from here (volume up volume up) shows volume up volume down, press volume down once more now shows volume down twice.
Hope this helps
Click to expand...
Click to collapse
Yeah it helps that I can probably assume that my buttons work fine.. I was thinking maybe they weren't registering as long pressed or something but apparently not this is really frustrating. Especially when an app freezes and I just have to sit there indefinitely till it comes back online or the battery goes flat
And I have no idea if it's something I did or something with the phone.
All I know for sure is that brand new it did work as I hard reset a couple times. Then I unlocked the bootloader and have no memory of it working since then... It makes no sense to me why completely returning to stock and relocking the bootloader has no effect though.

DreadPirateDan said:
Yeah it helps that I can probably assume that my buttons work fine.. I was thinking maybe they weren't registering as long pressed or something but apparently not this is really frustrating. Especially when an app freezes and I just have to sit there indefinitely till it comes back online or the battery goes flat
And I have no idea if it's something I did or something with the phone.
All I know for sure is that brand new it did work as I hard reset a couple times. Then I unlocked the bootloader and have no memory of it working since then... It makes no sense to me why completely returning to stock and relocking the bootloader has no effect though.
Click to expand...
Click to collapse
Yeah, I could imagine. You will have to find a cool fast battery draining game to help you along .
Not sure that it would be related to you unlocking the boot loader, otherwise I am sure quite a few would have mentioned that before now.
Do you even get the first vibrate confirmation? Have you tested the vibrate from the same service test menu?

danw_oz said:
Yeah, I could imagine. You will have to find a cool fast battery draining game to help you along .
Not sure that it would be related to you unlocking the boot loader, otherwise I am sure quite a few would have mentioned that before now.
Do you even get the first vibrate confirmation? Have you tested the vibrate from the same service test menu?
Click to expand...
Click to collapse
That what I'm thinking - can I seriously be the only one having this problem. And why the hell does everything else work perfectly fine lol.
And no I don't get any sort of response (vibration or anything). Normally it just results in the volume turns up then the screen locks or display just times out but even after a minute of holding pwr + vol up nothing happens and the phone is simply in sleep mode. Otherwise vibration works fine.. currently I'm restoring the backup I made of the out of the box stock rom.. that's pretty much the absolute last thing I can think of that might do anything. Trouble is I don't remember if I made the backup before or after unlocking the bootloader.. can't remember if I flashed a custom kernel to get CWM or installed it otherwise...

DreadPirateDan said:
That what I'm thinking - can I seriously be the only one having this problem. And why the hell does everything else work perfectly fine lol.
And no I don't get any sort of response (vibration or anything). Normally it just results in the volume turns up then the screen locks or display just times out but even after a minute of holding pwr + vol up nothing happens and the phone is simply in sleep mode. Otherwise vibration works fine.. currently I'm restoring the backup I made of the out of the box stock rom.. that's pretty much the absolute last thing I can think of that might do anything. Trouble is I don't remember if I made the backup before or after unlocking the bootloader.. can't remember if I flashed a custom kernel to get CWM or installed it otherwise...
Click to expand...
Click to collapse
I would recommend re unlocking the bootloader, the problem is a kernel level driver or hardware but it is definitely around that level.
Did you have any problems, or errors when you first unlocked the bootloader? Maybe Doomlord could give you some of his incredible knowledge on the subject

Sorry but are you trying to reboot the phone from a frozen state?
Sent from my C6603 using xda premium

Maddhouse said:
Sorry but are you trying to reboot the phone from a frozen state?
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
No the phone is 100% operational outside of the hard reset not working. It is just when I get stuck in a app that freezes or when CWM recovery tricks out and freezes I have to leave the phone for ages till either it a)unfreezes after an hour or so somehow, or b) the battery dies and it shuts off after a couple or more hours.
When your phone is out of action every second day simply cause you can't turn it off it gets pretty annoying haha. If it had a removeable battery I could easily live with it and just rip the batt out no dice.

Power + volume up + down all together
Sent from my C6603 using xda premium

Maddhouse said:
Power + volume up + down all together
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
He has tried that if you read the OP

danw_oz said:
He has tried that if you read the OP
Click to expand...
Click to collapse
I thought i couldnt see it, what post number is it?

Maddhouse said:
I thought i couldnt see it, what post number is it?
Click to expand...
Click to collapse
The very first

danw_oz said:
The very first
Click to expand...
Click to collapse
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
Can you change the bootloader? - Hard reset no longer working, Any insight?
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
At first I figured it could be kernel as that is the lowest code that I've knowingly changed.
Changing to back to stock kernel did not fix it.
Click to expand...
Click to collapse

Maddhouse said:
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
Click to expand...
Click to collapse
Yeah thats the one

Maddhouse said:
Power + volume up + down all together
Click to expand...
Click to collapse
Already tried that but no luck.
Stranger still is that I've began to notice that in flash mode the LED briefly flick green once then turns off when entering flash mode. Flash mode is still active, it just appears as though the phone is off :/

[Q] Is there a way to turn on htc one without the power button

My power button is broken is there a way to turn it on . i read an saw some videos on the web that it was possible with some phones using a JIG is that also possible on htc one or other methods to force boot. Please help

harry801 said:
My power button is broken is there a way to turn it on . i read an saw some videos on the web that it was possible with some phones using a JIG is that also possible on htc one or other methods to force boot. Please help
Click to expand...
Click to collapse
poke something in the hole to turn it on..then install viperx and in tweaks use volume key to wake it

hellothere74 said:
poke something in the hole to turn it on..then install viperx and in tweaks use volume key to wake it[/QU
Sorry for the stupid question do you mean a usb cable and then download viperx to my pc if yes do you have a download link for me. Thx so much for your help
Click to expand...
Click to collapse

hellothere74 said:
poke something in the hole to turn it on..then install viperx and in tweaks use volume key to wake it
Click to expand...
Click to collapse
can you please be more specific about this because my powerbutton is really broken and cant poke something in it i allready open the backpanel and push the little (dot) button and still no power. Is there no other programs to force start it. like using JIGS for s 2

hellothere74 said:
poke something in the hole to turn it on..then install viperx and in tweaks use volume key to wake it
Click to expand...
Click to collapse
can you please be more specific about this because my powerbutton is really broken and cant poke something in it i allready open the backpanel and push the little (dot) button and still no power. Is there no other programs to force start it. like using JIGS for s 2

Try holding one of the volume buttons while pressing power. A friend of mine had the same problem and we found this workaround accidentally.
No idea why it worked.

apptum said:
Try holding one of the volume buttons while pressing power. A friend of mine had the same problem and we found this workaround accidentally.
No idea why it worked.
Click to expand...
Click to collapse
Thx for the tip but allready did that ant dont work. I also allready open the back cover for better pressing. is there maybe something that i can do with my pc that can force start it ? i saw something in youtube for the galaxy s2 they was using a JIG and a another way was using a flash software. Is there something like that for the htc one. please im desprate