Related
hey guys i dont have a pc
i use my friends sumtimes for updates
but he beraly now got windows 7
and i cant mount my fone
i wont even be recongzide or wount alert me
any help is welcome thanx
u can gtalk me if u want [email protected]
fix
nevermind guys found out the problem
citizen-erased said:
nevermind guys found out the problem
Click to expand...
Click to collapse
Well be helpful and tell us what the problem and solution was
Update the USB driver
1) Get a computer of your own. Shouldn't cost more than $500 if you know how to shop for a full set.
2) Load Ubuntu on it. The drivers are already installed.
Windows 7 has recognized my G1 from build 7229 (its the one I started with) and haven't had any issues yet.
Windows 7 sometimes seems to be a problem sometimes with the drivers, removal and reinstall seems to do it
just install pdanet on your pc. it install all adb drivers.
After hours of headache I am still unable to test my app on the nexus one device... mainly because my 64 bit Vista cannot find a device driver for the usb.
1. I have gone tried the developer.android instruction, which ofcourse does not work.
2.I have also gone tried the idea posted in a thread in this forum <mods wont allow me to post link> without success mainly because the cmd says "boot configuration data store cannot be opened. access is denied."
3. I went over Install and run USBDeview<mods wont allow me to post link> , but it wont work either, USBDView cannot uninstall in step 5 of the blog.
Any help would be greatly appreciated. Please if someone has installed the USB Driver for nexus one in a Windows Vista x64 help me out.. i have so many apps on the emulator which I want to try on the new device !!
Is their any other way I can port my app from the emulator and try it on the device? Thanks in advance
Please do not post non-dev related threads in the dev section... yeah, i think u thot this was a dev question since u are talking abt porting an app, but the question is really not dev related... this shud go in Q&A... mods please move!!
In any case, I've installed the N1 driver in Windows 7 x64 without any problem, and since the driver is the same for Vista & 7 x64, I don't think it shud be a problem...
I simply downloaded the drivers via the SDK setup... plugged in the phone and manually installed the driver via device manager... worked like a charm!!
+1 for the section and also for it working on Win 7 pro x64 for me.
+1 on posting in the proper section. I also have it working on win 7 x64.
As a side note, people who think the word 'should' is spelled 'shud' should not be correcting people.
TwilightArchon said:
After hours of headache I am still unable to test my app on the nexus one device... mainly because my 64 bit Vista cannot find a device driver for the usb.
Click to expand...
Click to collapse
Try turning on USB debugging! Worked for me on Win7 when having similar difficulties
TwilightArchon said:
After hours of headache I am still unable to test my app on the nexus one device... mainly because my 64 bit Vista cannot find a device driver for the usb.
1. I have gone tried the developer.android instruction, which ofcourse does not work.
2.I have also gone tried the idea posted in a thread in this forum <mods wont allow me to post link> without success mainly because the cmd says "boot configuration data store cannot be opened. access is denied."
3. I went over Install and run USBDeview<mods wont allow me to post link> , but it wont work either, USBDView cannot uninstall in step 5 of the blog.
Any help would be greatly appreciated. Please if someone has installed the USB Driver for nexus one in a Windows Vista x64 help me out.. i have so many apps on the emulator which I want to try on the new device !!
Is their any other way I can port my app from the emulator and try it on the device? Thanks in advance
Click to expand...
Click to collapse
Here you go - USB Driver that worked fine with Vista 64 bit - found on this very site. Install the driver and just enable USB debugging.
krohnjw said:
Here you go - USB Driver that worked fine with Vista 64 bit - found on this very site. Install the driver and just enable USB debugging.
Click to expand...
Click to collapse
Thanks a lot.. this zip file worked like a charm unlike the last ones I downloaded from what seems to be everywhere ( even the google repository) !
Hello all.
First of all, before people shooting at me and saying "please search", I come from many Google and xda search with "MacOs, download mode, failure vm, virtual machine, odin , kies" in every combination you can imagine and no result.
So, the problem is the following one:
I remarked, with some friends from a french forum that we all succeed to use KIES in a virtual machine and connect the phone:
Click for full size - Uploaded with Skitch
That work like a charm.
Then w wanted to flash, then reboot the phone in Download mode ( yellow android at work ) and then there is a big crash telling us that the device is not recognized:
"unable to connect USB device to virtual machine"
Click for full size - Uploaded with Skitch
I would really be pleased to have more info on this issue and if we are only a little group to have this issue.
For info, I am using MacOS Snow Leopard and the trial of parallels desktops 6.
It doesn't work with VMware Fusion either. Must be something to do with the USB interface on Samsung.. I've heard some people have it going on Virtualbox running on Linux - but not Mac.
Works fine on VirtualBox on Ubuntu.
Why don't you give Heimdall a go? Haven't tried it personally, but OS X is in the list of supported OSes
Maybe I found the explanation , thanks to ed link:
Although Heimdall runs on OS X all Galaxy S phones tested thus far contain a bug in the secondary boot loader that prevents the phone registering itself with OS X. This may change if Samsung release an updated secondary boot loader.
Click to expand...
Click to collapse
Maybe there is the same problem.
Does the secondary boot loader has a link with download mode? If yes, that might be the problem!
profete162 said:
Maybe I found the explanation , thanks to ed link:
Maybe there is the same problem.
Does the secondary boot loader has a link with download mode? If yes, that might be the problem!
Click to expand...
Click to collapse
Saw that today too.. .pretty sure its the issue since it affects all parallels, fusion and virtualbox on Mac OSX.
profete162 said:
Maybe I found the explanation , thanks to ed link:
Maybe there is the same problem.
Does the secondary boot loader has a link with download mode? If yes, that might be the problem!
Click to expand...
Click to collapse
Yes, download mode functionality is provided by the secondary boot loader. If you really desperately want to get it working with OS X then you would need to download the source for, modify and install a custom IOUSBFamily.kext that contains a work-around specifically for the Galaxy S.
The only options for we Mac users right now are to find a Windows machine, install boot camp on your Mac (then point your vmware machine to it to save duplicate Windows wasted space), or possibly find a way to boot from an external drive with Windows (like a thumbdrive or livecd if possible).
distortedloop said:
The only options for we Mac users right now are to find a Windows machine, install boot camp on your Mac (then point your vmware machine to it to save duplicate Windows wasted space)
Click to expand...
Click to collapse
Exactly what i have done. And I HATE it :|
I had this same problem, and I just saw this thread after spending hours last night trying to figure out why XP in Parallels stopped recognizing the phone as soon as it went into download mode. So irritating!
it works for me on VMware 7 + WinXP SP3
because my Win7 64bit PC is crazy it won't recognize the phone randomly, twice it bricked my phone doing the Flash on the Host PC
so after setting up my ROM FLASH VMware machine, now i no longer have problem
stupid windows, no time to mess with the system registry to figure out what is the madness with the USB detection
i'm pretty sure you should have no problem as well if you use VMware 6.5
I posted this in the Heimdall thread but thought I should let followers of this thread know also.
I sent Samsung the OS X USB failure log and since then Samsung have informed me that the Froyo update (specifically the Nordic version released October 15) includes a fixed bootloader which should allow the phone to be recognised in OS X. I'm yet to verify this but hopefully this is the case!
Hi All
I am having issues upgrading my mother in laws lg970 to ICS i have tried multiple drivers/ways
all with same issue when phone reboots in to s/w upgrade mode my computer stops being able to detect it comes up with unknown device. Machine has multiple reboots before/after uninstall/installing drivers
I have tried the tons of guides around the place, tried using LGMobile Support Tool, KDZ & Smartflash all with same issue, Computer detects phone fine when its on, but as soon as i go in to S/W mode no luck. I have tried LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2.1_2 & LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1, the LG software downloads LG United Mobile Driver 3.7.2.0
(havin't had this much issue doing any of my samsung phones, or acer tablets)
Anyone got any ideas
Thanks
I also often get this problem.
After searching around, I found this step, it works for me
redgolum said:
After 2 day on this @"#[email protected]# phone, I find a solution work only on widows 7:
With the usb recognition I succed with this protocole,
1) Uninstall the Lg driver
2) Install the driver with B2C
3) Put the phone in S/W mode with the battery windows will say that it's not recognized,
4) Unplug the phone It will stay on S/W mode
5) Reboot Windows 7, and as soon as the desktop finish to load, plug your phone
And miracle it's work. Sometime you need to do it 2,3, or 10 times.
Click to expand...
Click to collapse
Try from step 3 first. If it doesn't work, repeat from step 1
If it still doesn't work, do this first, then repeat above prosess
*note (base on my experience):
- step 5, I plug it when the shortcut in desktop appear
- works in windows 7 and windows 8
t0g3 said:
I also often get this problem.
After searching around, I found this step, it works for me
Try from step 3 first. If it doesn't work, repeat from step 1
If it still doesn't work, do this first, then repeat above prosess
*note (base on my experience):
- step 5, I plug it when the shortcut in desktop appear
- works in windows 7 and windows 8
Click to expand...
Click to collapse
Yeah i came across that ealier given that a go multiple times with out any luck. Also tried getting it to work on a windows 7x64 laptop with no luck, install the drivers and it does not find it in s/w update mode.
AW: [Q] Issues drives Software Update mode
If you use only the original LG driver it will only work with a 32bit Windows. To make it work with a 64bit Windows you need to use a extra SW. I think it's call something like enabler, you find it here somewhere.
Sent from my LG-P970 using xda app-developers app
SaschaKH said:
If you use only the original LG driver it will only work with a 32bit Windows. To make it work with a 64bit Windows you need to use a extra SW. I think it's call something like enabler, you find it here somewhere.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
nope, I use windows 7 and windows 8 64bit, both works without any extra SW.
http://csmgdl.lgmobile.com/swdata/U...bileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.zip
Windows enabler is used to enabling button/checkbox that disabled on a program
Hey guys,
my x98 Air III will arrive in the next couple of days and I plan to run Windows 10 on it. i got the 32GB Android only version and hope since there is a 64GB dual boot version that the bios isn't locked and I can boot from USB. Has anyone tried this already?
mrchrister said:
Hey guys,
my x98 Air III will arrive in the next couple of days and I plan to run Windows 10 on it. i got the 32GB Android only version and hope since there is a 64GB dual boot version that the bios isn't locked and I can boot from USB. Has anyone tried this already?
Click to expand...
Click to collapse
http://techtablets.com/2015/09/teclast-x98-air-iii-gets-dual-boot-bios-and-files-released/
i want to give it a try but i'm a bit scared i mess up my shiny new tablet...
i found some more info and it looks like it should be possible to turn my tablet into a dual booting device. The 32GB version that I have is M5C5
http://bbs.teclast.com/thread-518225-1-1.html
i just connected a powerd hub and put teclast win10 on an external usb stick. i interrupted the boot by hitting esc on boot, tried to launch from usb, but it didnt work..
Ordered mine yesterday. My plan is also to put Win10 on it, so I'm collecting info/files on how to do it. Maybe Chris from TechTablets will make a video of the process before mine arrives?
he just released a review: http://techtablets.com/2015/11/teclast-x98-air-iii-review/
I've managed to install the dual boot bios on my Air III, but couldnt figure out why flashing was failing. Every time it would go to 10% and fail (when using that Intel's flash tool).
So how did you make it work? Could you post some instructions?
I was succeeded flashing dual boot bios,
and re flashing android 10G patition .
however, I cant boot windows to install it.
dual booting mod didn see windows logo.
I trid to make a booting USB, winpe USB.
didn work out.
zukera said:
I was succeeded flashing dual boot bios,
and re flashing android 10G patition .
however, I cant boot windows to install it.
dual booting mod didn see windows logo.
I trid to make a booting USB, winpe USB.
didn work out.
Click to expand...
Click to collapse
Im at that stage now as well. I couldnt flash the rom automatically so I had to manually input the fastboot commands. Got few things to try in regards of delpoying Windows on it, but that will have to wait until I get home though.
I will put together a guide once I manage to get Windows working, hopefully sooner rather than later
arczi19 said:
Im at that stage now as well. I couldnt flash the rom automatically so I had to manually input the fastboot commands. Got few things to try in regards of delpoying Windows on it, but that will have to wait until I get home though.
I will put together a guide once I manage to get Windows working, hopefully sooner rather than later
Click to expand...
Click to collapse
thank for ur reply
I was installed windows 10, today.
I tried orignal teclast x98 air III dual files to install it.
it works.
zukera said:
thank for ur reply
I was installed windows 10, today.
I tried orignal teclast x98 air III dual files to install it.
it works.
Click to expand...
Click to collapse
How did you manage to install Windows? Can you provide links to files needed to install it?
I'm pretty happy with Android right now, but I wonder if the UI response is more snappy under W10. I already have a USB prepared with the Teclast W10 version. Just waiting for instructions on how to flash bios etc..
I have done a clean Windows 10 Home 32bit (TH2 1511) install and use the driver package from HERE.
All works fine yet but i know one issue with screen brightness:
When i tap the brightness icon (with 25-100%) there came a point with 0% brightness and i tick it and the screen was off and no chance to find the right button without screen
I restart the tab with 15sec. power button but after the short welcome screen, the screen goes back to dark.
So i must use a keyboard and start the tab in rescue modus and set the power managment to "standard". After this the screen was on after next restart.
My question: is it possible to delete the 0% entry in screen brightness?
zukera said:
I was succeeded flashing dual boot bios,
and re flashing android 10G patition .
however, I cant boot windows to install it.
dual booting mod didn see windows logo.
I trid to make a booting USB, winpe USB.
didn work out.
Click to expand...
Click to collapse
How did you manage update BIOS? Did you flash it from Windows PC with USB Debugging enabled or from EFI Shell? My Windows desk cannot find Air III, it says 'no devices found'.
I have managed to put windows on it, by downloading all the files directly from Teclast forums. However, windows is in Chinese and I cant seem to change the language to anything else. Everytime I download a new language, it fails without oving me a reason any suggestions what to do?
arczi:
if you let me know how you flashed the bios and which files you used for the install, i will put it on my tablet as well and we can figure it out together
arczi19 said:
I have managed to put windows on it, by downloading all the files directly from Teclast forums. However, windows is in Chinese and I cant seem to change the language to anything else. Everytime I download a new language, it fails without oving me a reason any suggestions what to do?
Click to expand...
Click to collapse
Download it it directly from the Microsoft with the ISO file in the language of your choice. :angel:
Mikha777 said:
Download it it directly from the Microsoft with the ISO file in the language of your choice. :angel:
Click to expand...
Click to collapse
Thanks, did that and all is fine now. Only trouble was none of the drivers were included in the official ISO files, so I had to manually install a lot of things. The file that can be downloaded directly from teclast is optimized and preconfigured with all the drivers that are needed.
mrchrister said:
arczi:
if you let me know how you flashed the bios and which files you used for the install, i will put it on my tablet as well and we can figure it out together
Click to expand...
Click to collapse
First of all get this: http://pan.baidu.com/s/1kTyAH2f
Secondly, follow this tutorial to install all necessary drivers and tools: http://forum.xda-developers.com/showpost.php?p=62823535&postcount=5
Thirdly, manually edit "Update_Android.bat" file (comes with a package that you have downloaded as the first step) to make sure that all file paths are correct - most importantly the 4th line of this wile, where it points to Intel Manufacturing Flash Tool. Also make sure that there are no Chinese characters in any of the file paths.
Lastly, run "Update_Android.bat" and follow the instructions there I've found that unless you get everything right (all file paths and tool) there isnt much risk of something going wrong, as nothing will actually happen.
thanks for the info! just installing windows 10 on my m5c5 32gb air iii right now, seems to work bios flash was easy and painless. after flashing it took a while for the tablet to power back on. it also didnt see my win10 install usb stick at first. after a few trial and error attempts it eventually booted into windows install.
I'm installing stock windows. which drivers did you use to get the tablet fully working? right now I'm getting the July 2015 Air 3g Windows 10 drivers from techtablets
I have used the same package, majority of drivers can be downloaded using Windows, but there are some missing and thats where the package comes in useful.