Cyanogen 5.0.7 on G1, hangs on reboot. - G1 Q&A, Help & Troubleshooting

I have been running Cyanogen 4.2.15.1 for a few months now, I recently noticed that 5.0.7 (test5) for the G1 was released, and am trying to get it to install.
I follow the various steps to install, I have DangerSPL installed, then Cyanogen, then the Google Apps, and the install procedure seems to work correctly.
It hangs on the G1 screen for a long time. I read that 5-15 mins for a first boot is normal but I have had to on 30+ mins.
I can reboot into recovery and install 4.2.15.1 again, and it works like a charm, I wipe and try to install 5.0.7 (test5) from a fresh 4.2.x and no luck.
Has anyone had any similar problems or know of a way to solve them?

thedevilsjester said:
I have been running Cyanogen 4.2.15.1 for a few months now, I recently noticed that 5.0.7 (test5) for the G1 was released, and am trying to get it to install.
I follow the various steps to install, I have DangerSPL installed, then Cyanogen, then the Google Apps, and the install procedure seems to work correctly.
It hangs on the G1 screen for a long time. I read that 5-15 mins for a first boot is normal but I have had to on 30+ mins.
I can reboot into recovery and install 4.2.15.1 again, and it works like a charm, I wipe and try to install 5.0.7 (test5) from a fresh 4.2.x and no luck.
Has anyone had any similar problems or know of a way to solve them?
Click to expand...
Click to collapse
first off bro never flash it direct on top of a rom your not sure of. but all u gotta do is :
wipe all 5>flash danger spl>wipe data factory only>flash test5>flash google app add on>reboot.
if this fails then u jus need to start from rc29, re-root, flash test5.
i kno for a fact this works. if u still need assistance feel free to pm my profile here on xda and ill reply asap.
goodluck and enjoy

Ok here is what I did, I flashed Amon_RA's recovery image (I was using CM), wiped everything with Amon_RA and installed DangerSPL, CM 5.0.7, and the Google Apps, and this time I was greeted with the nice new boot logo!
I dont know if it was just bad luck on my part of if the CM Recovery Image is not a good choice for installing 5.0.7?

thedevilsjester said:
Ok here is what I did, I flashed Amon_RA's recovery image (I was using CM), wiped everything with Amon_RA and installed DangerSPL, CM 5.0.7, and the Google Apps, and this time I was greeted with the nice new boot logo!
I dont know if it was just bad luck on my part of if the CM Recovery Image is not a good choice for installing 5.0.7?
Click to expand...
Click to collapse
so it worked or no ???? lol hope it did and always wipe after installing danger spl jus heads up for next time

Yes it worked, I have 5.0.7 (test5) successfully installed, thank you.

Related

Can't install Cyanogen 4.2.6 nor Dwang 1.13

I am completely stuck as of now, tried everything! No idea what else I could try. I basically can install any rom just fine, Dwang 1.12 works fine, Cyanogen Mod 4.2.5 works fine too. I am not able to install the latest ones by either though, what could be the issue?
I have rooted MyTouch 3g.
What do you have on your phone right now, and what methods have you tried? What have your steps been?
I have 2 MyTouch 3g phones actually, one is my roomie's and I can install dwang's 1.13 just fine on it, weird .
For dwangs:
Backup
Wipe
Install
Reboot and get stuck on the MT3G boot screen
For Cyanogens:
Backup
Wipe
Install rooted Base
Install Cyanogens
Reboot and get stuck at MT3G boot screen.
It is my understanding that Dwang's latest is based off Cyanogen's 4.2.6, thus I can see why both of them won't work. But why?
I am on Cyanogen's 1.4 recovery tools, I've had Amon RA 1.3.2, as well as RA 1.4.
HBOOT: 1.33.0006 (SAPP30000)
Radio: 2.22.19.26I
anybody?
afive720 said:
anybody?
Click to expand...
Click to collapse
Sorry i can't help, but just to add on... I'm having almost the same issue, but with a G1. Although i can install any of Dwang's versions, including 1.13, but as far as cyanogen goes, 4.2.5 works great, but 4.2.6 and 4.2.7.1 i get stuck at the g1 logo when trying to flash. If anyone can help my set up is
SPL 1.33.0006
Radio 2.22.19.26I
Amon_RA recovery-RA-dream-v1.2.3.img
have you both done thorough wipes through the console?
Are you flashing the signed developer zip file before trying to flash the rom itself?
The process should be...
Wipe
flash signed dream developer zip
NO REBOOT
flash the rom zip on top of the previous zip
Reboot
you can find links to the signed dream dev zip here
http://forum.xda-developers.com/showthread.php?t=593626
Since the first guy has a mt3g, you'll need to find that primary file. The dream one wont do it for you.
check cyanogen's wiki over at cyanogenmod.com
I've had a similar problem. I follow all the instructions correctly, but Dwang's 1.13 works and CM doesn't. For CM I did everything, wiped, flashed 1.6, flashed CM, rebooted, and then it would go back into Recovery for some reason. I'd reboot again and it'd hang on the Rogers screen for me. I couldn't fix it so I wiped, flashed Dwang's, and his worked fine. No clue why CM wouldn't work for me since that's the ROM I actually wanted.
DiSTroy3d said:
For CM I did everything, wiped, flashed 1.6, flashed CM, rebooted, and then it would go back into Recovery for some reason. I'd reboot again and it'd hang on the Rogers screen for me.
Click to expand...
Click to collapse
Yes the first reboot writes the radio files. The second boot writes the cache.
You will have to hit reboot when the cache writing stops. (reboot will become an option in the recovery)
This is the first boot of a brand new OS as far as your phone is concerned and it will take a few minutes. The boot process will take a while. The phone is writing and moving the entire android OS.
I have had mine hang for about 10 minutes before. Sometimes it is 5 minutes.
Mine normally hangs for about 2-5 in the G1 boot screen and another 3-5 in the cyanogen logo.

Want to reinstall CMod

hi,
a few days ago i uninstalled google maps on my G1 running the latest version on CyanogenMod. So i thouhgt i would reset everything by doing a wipe in the CM recovery Console (v1.4). So after doing a wipe i see that Google maps is still not there again. Im aware that i can install it again, but i would like to do a complete reset of all system files.
Could someone give me a hint on how to do this?
Thanks!
We need a little more info to be able to help.
What version of CM are you running?
Are you willing to do a complete wipe?
Were you running apps2sd?
Were you running a swap file or compcache?
Were you running a modified boot img?
Do you have a nandroid back-up?
Do you have any form of back up?
IF you don't know the answers to any of those that is fine, an "I don't know" is better than a "No", when it was really a "Yes".
All CM roms after {at least} 4.2.3.1 need the signed-dream_devphone_userdebug-ota-14721.zip (signed.zip)
{You can do a search for the link on these forums.}
The Google Maps apk comes from the signed.zip. Reflashing the CM on later versions will not get you anything from Google.
In fact you can really mess up your phone if you don't have the signed.zip .
You might wanna find it, download it, and have it on hand for when you need it.
And let us know the answers to the above questions so we can help you out.
Thanks for the reply!
I'm running CyanogenMod v4.2.8.1
Yes, i would love to do a complete wipe
I was not using swap2sd or compcache(as far as i know)
Concerning the Boot Image i have Recovery 1.4
Yes, i have Nandroid backup
Firmware-Version: 1.6
Baseband-Version: 62.50S.20.17U_2-22-19.26I
Kernel-Version: 2.6.29.6-cm42 [email protected] )
Build-Number: DRC83
I hope this info helps.
To have installed 4.2.8.1 you had to have the signed.zip file listed above.
Do not wipe ...yet
Try this...
HOME+POWER to boot to recovery
Install from zip
the signed.zip.....DO NOT REBOOT
Install from zip
cm 4.2.8.1.zip
REBOOT
The signed.zip should replace your maps program.
You might look into putting Amon Ra's recovery program on there instead of CM rec 1.4 RA's is more detailed and will allow you to wipe more data on the sdcard such as your dalvik cache and any partition data...IF you need to .
Try this simple step first and see where it gets you.
Ok, i applied the signed.zip, and after that i reapplied CyanogenMod 4.2.8.1.
Google Maps is back but some setting didnt get cleared. For example, the USB Debug mode is still on, or it continued to download some updates which i started earlier. It didnt reset everything.
Any idea why that might be?
LOL You said you wanted maps back...I got you maps back.
And now your not happy Jeez!
USB debugg is automatically turned on by the CM rom.
go to Settings>applications>Development to turn it off.
We didn't do a Fresh install we just did an re-install.
If you want to actually wipe it clean, then I highly suggest using Ra's recovery since it is a one click wipe.
Cm Recovery will wipe too.
Home+Power to cm rec 1.4
Wipe
Install from zip
signed.zip
install from zip
cm 4.2.8.1
REBOOT
And you should have a fresh install with no other data.
If you have apps already on there when you reboot, then you have apps2sd active and you need to wipe the ext partition to clear those apps.
The Amon Ra recovery will do that for you.
Well, i want to wipe since i got the feeling is a bit messed up. Just seems very slow at times and my connection drops once in a while.
So i'm going to Install Amon Ra's recovery and perform a wipe.
I didnt have app2sd active. I never did any partitioning to my sdard. Im going to Low Level format my sdcard just to make sure nothing is left on there. But as i mentioned, i did the reinstall as you said and after it booted, and i didnt the sign in stuff, setting time etc... it continued to download 2 apps which i started earlier.
I'll let you know how it went with Amon Ra's
Ok, this worked great! I installed Amon Ra's Recovery and executed ever option which had the word "wipe" in it Then applied signed.zip and after CMod. Perfect!
Thanks a lot for your help

Phone stuck at G1 Screen

Ok, I'm guessing I misunderstood something. I'm a "noob" so bear with me...
here's what I did.
I was running cm v 4.2.9.1 and decided to try and upgrade to the latest version. I wiped and reflashed and got 4.2.14.1 running, but I felt it was slow (the reason I didnt use any other new version), so I came here looking to see any new roms.
I decided KiNgxKxlicK AOSP 2.1 rom looked cool, so I downloaded it and flashed it (yes I wiped first). I'm guessing this is where it went wrong. The rom took 30 mins to finally boot to home (longest ever) but the sweet nexus screen made it easier to bear. I DID NOT do anything with an spl or any radio (that part still kinda confuses me to be honest). I'm guessing this is why I am in the predicament that I am.
The KiNgxKxlicK AOSP 2.1 rom loads fine, but was VERY slow. I decided I'd just go back to cm v 4.2.9.1. I went to wipe and reflash, but the G1 screen never disappeared. I let it load for about 30 minutes and decided that was a bit ridiculous before removing the battery (mind you, it never got past the T Mobile G1 screen). I was, however, able to reflash KiNgxKxlicK AOSP 2.1 rom and run it. This is all I am able to do. When trying to reflash cyonagen it just hangs on the G1 screen.
I'm a noob so I don't know what went wrong or what I missed.
Can someone PLEASE help me out here and tell me what I need to do to fix this. Thanks
Additional Notes:
Can't get to settings running KiNgxKxlicK AOSP 2.1 AT ALL, and a lot of programs Force Close on the rom.
Thanks for any help/input you guys can provide.
Thanks
Do you have Amon Ra recovery?
No I do not believe so, as I am not exactly sure what that is?
UPDATE: I should also note I checked my SPL and Radio, both were very old (as I realized I followed an OLD guide when I rooted my phone)
I upgraded to the latest radio and SPL and still have the same problem...except King's rom doesn't force close when I go to "settings".....thats about the only difference (still slow/laggy, lots of programs still FC)
When you boot into recovery (holding home+power) it should tell you what recovery image you are using. (i.e. mine says v1.5.2 down at the bottom of the screen) I ran into a similar issue when I attempted to jump between roms without taking all the appropriate steps; all I did was reformat my sd card, wipe the phone, and reflashed my rom and it worked great after that.
I tried reformatting my sd card, even re-partitioned it and I'm still having the same problems:
CM wont get past g1 screen after flash, King's rom still pretty slow....
What do you gys recommend I do next? This is getting really frustrating
1st: Check if youre Formatting is correct
2nd: Wipe EVERYTHING
3rd: Re-Format
4th: Try downloading the ROM again. It could be an issue with the ROM's
5th: Check you have proper radio and SPL (1.33.2005 and 26I)
6th: Pray
Try them all hope one of them works for you dude.
why is it that that 99% of newbs are on cyanogen
@Macrophage001
1. how do I CHECK my formatting to see if its correct?
2. Doesn't formatting do this automatically? I also "wiped" in recovery...
4. Not the roms, I have multiple CM roms, one of which I've had for some time with no problems and have re-flashed over and over
5. As stated above, I did not have the latest at first, i did upgrade to the latest radio and hakyuro(sp) spl to no avail.
@zachattack052
We've all been told it's THE BEST, much before even making the decision to root. I honestly thought CM was the only rom available, that's how much he's praised around here and other forums.....it's just what everyone tells us.
Here's what i suggest you do:
1> Download Amon_RA's recovery from here
here is a link to his thread
2> Transfer the file you just downloaded to the root of your sd
use this code to mount your sdcard from recovery console itself if needed
Code:
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
3>Disconnect usb and reboot to recovery (keep home pressed while powering on) or just type
reboot recovery if you are already in recovery console
4> Flash Amon's recovery:
Code:
#mount -a
#flash_image recovery /sdcard/recovery-RA-dream-v1.5.2.img
when complete, reboot to recovery again
5>Partion your sd using amon's recovery (All data on SD will be lost so backup if needed)
[Alt+P] then [Alt+0] or scroll down using the trackball or the volume keys
follow the prompts, set your swap-size to 96 MB (use the vol keys) and 512 MB ext2. when done use the back button to go back and reboot
The above step will give you the partitions required to run any rom. Please make sure you meet the radio and SPL requirements before flashing a rom.
6>Transfer the latest CyanogenMod rom to your SD and flash it.
I would suggest that you try bbuchacher's SuperD rom (it requires Haykuro's Danger SPL)
make sure you flash the radio first and then the SPL if you dont already have it
P.S. When anyone says full wipe, they mean doing a factory reset, wiping your ext partition and wiping the dalvik-cache. These are the first 3 options in Amon_RA's recovery's wipe menu
what i would do....
make sure you flash the HTC recovery files first before you flash the CM rom
go for the defanged version of HTC
so...(once u have amon ra's latest recovery installed)
wipe everything
flash htc / defanged (DO NOT REBOOT!!!)
flash cm latest rom
ALLOW IT TO LOAD FULLY
reboot (personal preference)
create a nandroid backup for future **** ups
enjoy ur rom!!
j.
airmcnair06 said:
@Macrophage001
1. how do I CHECK my formatting to see if its correct?
2. Doesn't formatting do this automatically? I also "wiped" in recovery...
4. Not the roms, I have multiple CM roms, one of which I've had for some time with no problems and have re-flashed over and over
5. As stated above, I did not have the latest at first, i did upgrade to the latest radio and hakyuro(sp) spl to no avail.
@zachattack052
We've all been told it's THE BEST, much before even making the decision to root. I honestly thought CM was the only rom available, that's how much he's praised around here and other forums.....it's just what everyone tells us.
Click to expand...
Click to collapse
1: Go to recovery console and type parted. A list will show up with your fat32,ext2/3/4,linux-swap settings.
2: Yes it does but you can never be too sure.
4: ok
thanx guys I followed the instructions MrBurrito and cqms13 gave and am now running the Super D rom just fine.
Thanks again!
very quick question..
did you wipe dalvik-cache?
Firerat said:
very quick question..
did you wipe dalvik-cache?
Click to expand...
Click to collapse
After installing the RA recovery, yes. I was running CM Recovery though when I began this thread, which is why I was not able to wipe dalvik

[Q] Cannot get CM6 to boot

I rooted my Sprint Hero and have been able to successfully flash and operate Fresh 2.3.3 but CANNOT figure out how to get CM6 to boot. I wiped prior to attempting the flash but all that happens is a lockup on the HTC boot screen. I have attempted to flash it twice, and waited about 20 minutes the first time and 45 the second time with no progress, eventually having to pull the battery and reboot in recovery mode. I was only able to wipe the data but when I tried to wipe the delvik cache, it told me I needed to do it via ADB. I tried to partition my SD card but it ended up cutting the available memory in half, and erasing my backup, and I had to use an external card reader to reload Fresh so that I could actually use my phone (which IS fully functional now). Should I be wiping EVERYTHING on the phone (including the battery and rotate info)? What am I missing?
I have heard nothing but great things about CM6 and am very disappointed that I cannot get it to work. Can anyone help?
Sprint HTC Hero
Firmware version: 2.1-update 1
Software version: 2.27.651.6
try wiping your ext partition
I wiped everything that the recovery menu would allow me to prior to the first attempt at flashing and it wouldn't load. I pulled the battery and rebooted to the recovery menu then partitioned the SD card, wiped just prior to the second attempt at re-flashing, re-flashed and it still locked up at the HTC screen.
I like to think I'm pretty computer savvy but I just can't figure this out. Why would Fresh 2.3.3 load without a hitch, but CM6 not?
make sure you recovery is 1.6 or 1.7 to be able to wipe dalvik i had same prob
My recommendation would be flashing the recovery in this thread here.
This the recovery I used while I was using Fresh 2.3.3, and when I upgraded to the CM6 Nigtlies.
I say Flash The Custon Amon_RA 1.7 in Darchdroid thread->NANDROID!!!!->Wipe Data->Dalvik->sd-ext(if using apps2sd)->Flash RC1 or Latest Nightly (your choice)->Flash Optionally Google Apps->Optionally Flash Uncapped Kernel and/or Battery Tweak(I use the uncapped Kernel, and not the battery tweak, and I get 24 hours+ with average use)
Try that out.
Funny, im running into the same problem after flashing the wrong blackmod... wiped, reflashed cm and now it wont go past the htc white boot screen
It did boot before though which is odd
Edit: Wiped, wiped dalvik and ext part, flashed rom and gapps, working just fine now... will flash batt tweak, bm and round clock in a min, hopefully it doesn't break it
jUgGsY,
Thank you for being so thorough in your response, it all makes sense! My only issue now is trying to re-flash the recovery image. I downloaded the RA-Darchstar image but I'm not sure if it's correctly being pushed to the SD card (all I get is a long list of ADB commands, no particular confirmation) and when I try to flash the image, I get a message telling me that it can't find the partition. What does this mean? Is the recovery image really that important to the updated ROM? How come there is no specific recovery image recommended on the CM forum?
EDIT: I found directions from the Unlockr on the youtubes. Gonna give it a try and see how it goes after that...
So it was decadence#7 kernel that was screwing up my boot... removed it and using stock darchstar
Ok... this is getting ridiculous.
*I flashed the RA-Darchstar (1.7) recovery image
*NANDROIDed
*Wiped data, cache, Dalvik and sd-ext
*Flashed RC1
*Flashed the google addon
*Rebooted
Been waiting for the damn thing to boot for almost 30 minutes now, still stuck on the HTC screen. Can anyone tell me what is going on?
jordanjackthomas said:
Ok... this is getting ridiculous.
*I flashed the RA-Darchstar (1.7) recovery image
*NANDROIDed
*Wiped data, cache, Dalvik and sd-ext
*Flashed RC1
*Flashed the google addon
*Rebooted
Been waiting for the damn thing to boot for almost 30 minutes now, still stuck on the HTC screen. Can anyone tell me what is going on?
Click to expand...
Click to collapse
Are you flashing RC1 or one of the nightly ones? I had the same issue with RC1. I could not get it to boot past the HTC screen. However, the nightly ones flash just fine. I would suggest flashing a nightly. I now see you said RC1, lol. Try the latest nightly.
It looks like I will have to go with a nightly. Are there any that you recommend? The most recent or one from a few nights back?
jordanjackthomas said:
It looks like I will have to go with a nightly. Are there any that you recommend? The most recent or one from a few nights back?
Click to expand...
Click to collapse
The latest one seem to be very good. 8/22 but make sure you download the latest google apps for it also.
For some reason, I couldn't get any variation of CM to load on my phone (CM6 or the Vanilla variant). I went with Darch's LegendROM and it is excellent - much better than stock 2.1 for the Hero! Really fast and has some neat extra features. I noticed, though, that my reception is kind of bad now and I usually have excellent coverage at my house. I already downloaded the most up-to-date Sprint radio (2.42.01.04.27) but was just curious: do I need to wipe and re-flash the image FIRST or can I just flash the radio image over the already installed ROM?
AND: Please excuse my inexperience with all of this, but I'm about to ask two already answered questions: I'm not looking for long-winded answers but if someone could point me to a relevant thread, it would be GREATLY appreciated.
1) I keep getting a "process com.google.android.googleapps has stopped working" error when I try to sync with my gmail account. How do get this to work?
2) I remember reading that there was a known MMS issue with Darch's DroidROM, not any issue with the LegendRom, but I just received a "generic network failure" message when my wife tried to send me picturemail. Is there a workaround for this?
Thank you all for your patience!

[Q] Help: cm6 stuck at "X" after universal root with locked bootloader

So I just got back my nexus one from htc, got my mother board changed and preloaded with 2.2. I rooted it with universal root without unlocking my bootloader.
Problem: when I reboot after successfully loading CM6 and have it running, it reboots to the "X" and hangs.
Am I doing something wrong?
For how long is it hanging? I recall having to wait what seemed like forever the first time I booted with CM6... but eventually it 'took'.
rnick1976 said:
For how long is it hanging? I recall having to wait what seemed like forever the first time I booted with CM6... but eventually it 'took'.
Click to expand...
Click to collapse
You have a locked bootloader as well right? I waited a good 30 mins. Maybe i should leave i and give it more time to boot?
All works normally on inital boot of CM6 after install with locked bootloader, just that when i try to reboot the first time manually... it stays at the "X" for an awefully long time.
Did you wipe?
Try wiping data,cache,dalvik-cache.
ya, this is what i did.
1) Universal root with locked biootloader on stock 2.2
2) installed rom manger
3) flashed recovery + downloaded and flashed CM6 + google apps
Boots up fine, runs CM6 flawless. Upon manual reboot, it hangs on the X
Then i tried:
1) reboot into recovery
2) full wipe + davlick cache
3) reinstall CM6 + google apps
Still hangs. I haven't had time to play with it, but ill try to leave it along upon reboot a lil longer to see if it pulls thu~
Please let me know whether after installing the 6.0 cyn. rom and after the initial install you can then reboot and it pulls up and runs as usual. I am getting ready to flash the cyn 6.0 rom I am on stock 2.2 and have never flashed a rom before I have backed up the current rom through Rom Manager and flashed Clockworkmod recovery and I have the unloocked bootloader root as well. I have a question if and when I flash the new rom through Rom Manager does it not wipe and clear data etc. automatically? If not how would i go about doing that. Any and all help is greatly Appreciated!!!!!!!!!!!!!!
tenbeau said:
Please let me know whether after installing the 6.0 cyn. rom and after the initial install you can then reboot and it pulls up and runs as usual. I am getting ready to flash the cyn 6.0 rom I am on stock 2.2 and have never flashed a rom before I have backed up the current rom through Rom Manager and flashed Clockworkmod recovery and I have the unloocked bootloader root as well. I have a question if and when I flash the new rom through Rom Manager does it not wipe and clear data etc. automatically? If not how would i go about doing that. Any and all help is greatly Appreciated!!!!!!!!!!!!!!
Click to expand...
Click to collapse
MY bootloader is LOCKED, i rooted differently. Since you have a UNLOCKED bootloader, you will have no problems booting.
I still never got a chance to play with the N1 yet, ill keep u guys updated
tenbeau said:
I have a question if and when I flash the new rom through Rom Manager does it not wipe and clear data etc. automatically? If not how would i go about doing that. Any and all help is greatly Appreciated!!!!!!!!!!!!!!
Click to expand...
Click to collapse
When you go to flash a new ROM in Manager, it will offer you the option to wipe and/or backup before it applies the ROM.
Thank you so much for the kind replies!! I meant to say that I had a locked bootloader root using the one click root and unroot. I guess this means I would face the same situation as described earlier in this thread. I am very grateful to all the posters for sharing. THANK YOU!!!
Do you mean it hangs on the nexus one X boot animation? Because CM6 has it's own boot animation you shouldn't see that at all.
I would test it with a different Rom to see if you get the same result. If it's only CM6 doing that, maybe try the nightly version.

Categories

Resources