Database Develop

Phone stuck at G1 Screen

Ok, I'm guessing I misunderstood something. I'm a "noob" so bear with me...
here's what I did.
I was running cm v 4.2.9.1 and decided to try and upgrade to the latest version. I wiped and reflashed and got 4.2.14.1 running, but I felt it was slow (the reason I didnt use any other new version), so I came here looking to see any new roms.
I decided KiNgxKxlicK AOSP 2.1 rom looked cool, so I downloaded it and flashed it (yes I wiped first). I'm guessing this is where it went wrong. The rom took 30 mins to finally boot to home (longest ever) but the sweet nexus screen made it easier to bear. I DID NOT do anything with an spl or any radio (that part still kinda confuses me to be honest). I'm guessing this is why I am in the predicament that I am.
The KiNgxKxlicK AOSP 2.1 rom loads fine, but was VERY slow. I decided I'd just go back to cm v 4.2.9.1. I went to wipe and reflash, but the G1 screen never disappeared. I let it load for about 30 minutes and decided that was a bit ridiculous before removing the battery (mind you, it never got past the T Mobile G1 screen). I was, however, able to reflash KiNgxKxlicK AOSP 2.1 rom and run it. This is all I am able to do. When trying to reflash cyonagen it just hangs on the G1 screen.
I'm a noob so I don't know what went wrong or what I missed.
Can someone PLEASE help me out here and tell me what I need to do to fix this. Thanks
Additional Notes:
Can't get to settings running KiNgxKxlicK AOSP 2.1 AT ALL, and a lot of programs Force Close on the rom.
Thanks for any help/input you guys can provide.
Thanks

Do you have Amon Ra recovery?

No I do not believe so, as I am not exactly sure what that is?
UPDATE: I should also note I checked my SPL and Radio, both were very old (as I realized I followed an OLD guide when I rooted my phone)
I upgraded to the latest radio and SPL and still have the same problem...except King's rom doesn't force close when I go to "settings".....thats about the only difference (still slow/laggy, lots of programs still FC)

When you boot into recovery (holding home+power) it should tell you what recovery image you are using. (i.e. mine says v1.5.2 down at the bottom of the screen) I ran into a similar issue when I attempted to jump between roms without taking all the appropriate steps; all I did was reformat my sd card, wipe the phone, and reflashed my rom and it worked great after that.

I tried reformatting my sd card, even re-partitioned it and I'm still having the same problems:
CM wont get past g1 screen after flash, King's rom still pretty slow....
What do you gys recommend I do next? This is getting really frustrating

1st: Check if youre Formatting is correct
2nd: Wipe EVERYTHING
3rd: Re-Format
4th: Try downloading the ROM again. It could be an issue with the ROM's
5th: Check you have proper radio and SPL (1.33.2005 and 26I)
6th: Pray
Try them all hope one of them works for you dude.

why is it that that 99% of newbs are on cyanogen

@Macrophage001
1. how do I CHECK my formatting to see if its correct?
2. Doesn't formatting do this automatically? I also "wiped" in recovery...
4. Not the roms, I have multiple CM roms, one of which I've had for some time with no problems and have re-flashed over and over
5. As stated above, I did not have the latest at first, i did upgrade to the latest radio and hakyuro(sp) spl to no avail.
@zachattack052
We've all been told it's THE BEST, much before even making the decision to root. I honestly thought CM was the only rom available, that's how much he's praised around here and other forums.....it's just what everyone tells us.

Here's what i suggest you do:
1> Download Amon_RA's recovery from here
here is a link to his thread
2> Transfer the file you just downloaded to the root of your sd
use this code to mount your sdcard from recovery console itself if needed
Code:
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
3>Disconnect usb and reboot to recovery (keep home pressed while powering on) or just type
reboot recovery if you are already in recovery console
4> Flash Amon's recovery:
Code:
#mount -a
#flash_image recovery /sdcard/recovery-RA-dream-v1.5.2.img
when complete, reboot to recovery again
5>Partion your sd using amon's recovery (All data on SD will be lost so backup if needed)
[Alt+P] then [Alt+0] or scroll down using the trackball or the volume keys
follow the prompts, set your swap-size to 96 MB (use the vol keys) and 512 MB ext2. when done use the back button to go back and reboot
The above step will give you the partitions required to run any rom. Please make sure you meet the radio and SPL requirements before flashing a rom.
6>Transfer the latest CyanogenMod rom to your SD and flash it.
I would suggest that you try bbuchacher's SuperD rom (it requires Haykuro's Danger SPL)
make sure you flash the radio first and then the SPL if you dont already have it
P.S. When anyone says full wipe, they mean doing a factory reset, wiping your ext partition and wiping the dalvik-cache. These are the first 3 options in Amon_RA's recovery's wipe menu

what i would do....
make sure you flash the HTC recovery files first before you flash the CM rom
go for the defanged version of HTC
so...(once u have amon ra's latest recovery installed)
wipe everything
flash htc / defanged (DO NOT REBOOT!!!)
flash cm latest rom
ALLOW IT TO LOAD FULLY
reboot (personal preference)
create a nandroid backup for future **** ups
enjoy ur rom!!
j.

airmcnair06 said:
@Macrophage001
1. how do I CHECK my formatting to see if its correct?
2. Doesn't formatting do this automatically? I also "wiped" in recovery...
4. Not the roms, I have multiple CM roms, one of which I've had for some time with no problems and have re-flashed over and over
5. As stated above, I did not have the latest at first, i did upgrade to the latest radio and hakyuro(sp) spl to no avail.
@zachattack052
We've all been told it's THE BEST, much before even making the decision to root. I honestly thought CM was the only rom available, that's how much he's praised around here and other forums.....it's just what everyone tells us.
Click to expand...
Click to collapse
1: Go to recovery console and type parted. A list will show up with your fat32,ext2/3/4,linux-swap settings.
2: Yes it does but you can never be too sure.
4: ok

thanx guys I followed the instructions MrBurrito and cqms13 gave and am now running the Super D rom just fine.
Thanks again!

very quick question..
did you wipe dalvik-cache?

Firerat said:
very quick question..
did you wipe dalvik-cache?
Click to expand...
Click to collapse
After installing the RA recovery, yes. I was running CM Recovery though when I began this thread, which is why I was not able to wipe dalvik

Why does my Rodriguezstyle MIUI keep rebooting after install?

I downloaded and installed Rodriguezstyle MiUi rom yesterday, following all the install procedures(the double wipes and what not). But when I go to use it, it sometimes worked and it sometimes would crash and reboot. It was very weird because instead of just rebooting to the os, it would give the Nexus X then, after going no further, reboot again giving the Nexus X and reboot again and so on. This happened with every MiUi rom I installed, but not with the Evil Desire rom I have now. I really like MiUi, do you guys have any fix?
Specs - Nexus One w/ 5.12 Korean Radio
Trying Rods 1.6.6

Have you overclocked it with setcpu? You might want to turn that off and see what happens. I assume you did a complete wipe first btw?

I did wipe and my rom crashes before I can install setcpu

MIUI 0.11.5 + English Pack
I am using MIUI 0.11.5 Deodexed + English Pack. No issues so far. Its perfect.

Why are you making multiple useless threads about this?

@ inferus
could you post the site you got it from. And I have also tired the bundle, which did not work either

MIUI stock
Here you go
http://forum.xda-developers.com/showthread.php?t=789566

I tried all three of those and on every one my phone gets stuck in the boot loop. I have tried everything, factory wiping, cache wiping, dalvik wiping, battery wiping, and clear storage. is there any way I can completely delete the operating system off my phone so I can freshly install the new rom of MiUi. This is bootloop also happens to me when I flash micromod and cyanogen. THIS IS SO FRUSTRATING! does anyone have the same problem too

this static X bootloop also happened a lot on KoR. its based on CM6.0 but maybe this solution will also fix your problem:
http://forum.xda-developers.com/showpost.php?p=8023620&postcount=4383

@pseudoheld
You are the freaken man, however, is this a permanent fix or only temporary?

I spoke too soon, when I do HBoot in the boot loader, sometimes it skips going to the recovery and goes into the boot loop. Is there any way to update the bootloader

paintmandoo3993 said:
I tried all three of those and on every one my phone gets stuck in the boot loop. I have tried everything, factory wiping, cache wiping, dalvik wiping, battery wiping, and clear storage. is there any way I can completely delete the operating system off my phone so I can freshly install the new rom of MiUi. This is bootloop also happens to me when I flash micromod and cyanogen. THIS IS SO FRUSTRATING! does anyone have the same problem too
Click to expand...
Click to collapse
I was not referring to the other links on that post. I installed the stock hosted directly on that post. Also provided a link below for your convenience
http://djmcnz.batteryboss.org/MIUI/deodexed/miui-n1-0.11.5-deodexed-signed-PROPER.zip
And the English pack.
http://forums.miui-dev.com/viewtopic.php?f=5&t=39

i will keep you posted, again

and same problem. Bootloop and whenever I go to the HBoot and try to boot into recovery I get the boot loop again and it wont even enter recovery, I gotta pop the battery

what recovery did you use

Stumped....Maybe you guys can help. Or maybe not

I have 2 nook colors one for me and one for my girlfriend, I am/was running CM 7 on them. Its been awhile since ive updated them. Ive tried the newest nightly and the latest STABLE release. Both got hung up on the same spot. The green CM logo will say its loading then it will go into a black screen lit by the backlight and just hangs there. no boot animation, no boot loop. Just sits there. Or It will just reboot itself back into clockwork after saying it installed the rom. Ive used the CWM removal and that made it just hung on a nook bootup screen.
Ive let it sit for 15 minutes and nothing. Im not new as ive rooted my og droid, my dx and 2 nook colors. I havent really had this issue with the nooks. not really sure what to do. Ive wiped data/cache formatted the symsted, data and cache and nothing.
My steps are as follows.
1)Download either Phiremod test 7 or ANY CM nightly
2) plug my data sdcard into my computer and transfer
3)boot into clockwork
4)Wipe pretty much everything (I also tried installing on top of the stable releases)
5)Install.
I know to expect issues but there HAS to be something im doing wrong that lets one nook install flawlessly and another nook that wont install any nightly or test build. If it didnt boot up they wouldnt leak the nightly. Its something on my end. I gotta figure it out
I also just went back to stock and re-rooted and I have the same issue

oman0123 said:
I have 2 nook colors one for me and one for my girlfriend, I am/was running CM 7 on them. Its been awhile since ive updated them. Ive tried the newest nightly and the latest STABLE release. Both got hung up on the same spot. The green CM logo will say its loading then it will go into a black screen lit by the backlight and just hangs there. no boot animation, no boot loop. Just sits there. Or It will just reboot itself back into clockwork after saying it installed the rom. Ive used the CWM removal and that made it just hung on a nook bootup screen.
Ive let it sit for 15 minutes and nothing. Im not new as ive rooted my og droid, my dx and 2 nook colors. I havent really had this issue with the nooks. not really sure what to do. Ive wiped data/cache formatted the symsted, data and cache and nothing.
My steps are as follows.
1)Download either Phiremod test 7 or ANY CM nightly
2) plug my data sdcard into my computer and transfer
3)boot into clockwork
4)Wipe pretty much everything (I also tried installing on top of the stable releases)
5)Install.
I know to expect issues but there HAS to be something im doing wrong that lets one nook install flawlessly and another nook that wont install any nightly or test build. If it didnt boot up they wouldnt leak the nightly. Its something on my end. I gotta figure it out
I also just went back to stock and re-rooted and I have the same issue
Click to expand...
Click to collapse
You probably have the wrong bootloader and kernel...the newest cm7s are based on the 2.6.32, not the older 2.6.29 (or something), and the newest 1.2 bootloader..which you probably don't have if it's "been awhile"..lol...You have to upgrade your Cwm first, from 3.0.1.0 to 3.0.2.8, I think, then flash your Cwm to a nightly after 86??(Google to check), and it will change your boot partition to the correct one...If your nook still says "touch the future", you're on the wrong bootloader.....Also, quit using Phiremod.....it's a copy of Cm7 first of all, but by the time it's released, it's already outdated, it's not updated like it should be, and it's Douchey. Google the basics of what I described above if it sounds like that might be your problem and lmk how it works out for you....Btw....I used nightly 106 for this exact thing on another of my Nooks a few days ago and it worked flawlessly...There are newer nightlies out, but that one for sure worked.....
Sent from my NookColor using Tapatalk

I might be confused; Is one of your Nooks OK or are they both refusing to boot anything based on the .32 Linux kernel?
As I read it you aren't having trouble loading either with 7.0.3 stable. Correct?
The only thing I could suggest is loading the stable version, downloading the latest nightly CM (skip Phiredrop's theme for now) DIRECTLY to the SD card (skip the computer step), and do a factory reset and format boot, system, data, and cache (all four).
Load just the nightly and gapps (save the OC kernel for later), and then see if THAT boots all the way up.
Of course make sure you have a full backup of the stable OS install before you start.
If none of that works, then prepare the SD card as an install card and try that. Do you have just the one card?

Thanks for the replies....I thought 3.2.0.1 was the newest clockwork? I guess I need to pay more attention to the nook. lmao Mazook I think you are on the right track. Also to the phiremod is that the og droid equivalent to UD? hahahaha I actually liked the look of phiremod but i digress...
On that note I installed the uboot 1.2 and flashed it and it still boots into clockwork but that maybe because I may be on an outdated cwm im the one i stated above

DiDGR8 said:
I might be confused; Is one of your Nooks OK or are they both refusing to boot anything based on the .32 Linux kernel?
As I read it you aren't having trouble loading either with 7.0.3 stable. Correct?
The only thing I could suggest is loading the stable version, downloading the latest nightly CM (skip Phiredrop's theme for now) DIRECTLY to the SD card (skip the computer step), and do a factory reset and format boot, system, data, and cache (all four).
Load just the nightly and gapps (save the OC kernel for later), and then see if THAT boots all the way up.
Of course make sure you have a full backup of the stable OS install before you start.
If none of that works, then prepare the SD card as an install card and try that. Do you have just the one card?
Click to expand...
Click to collapse
Ive tried all of that. hopefull mazooks way works. Otherwise im out of ideas

oman0123 said:
Thanks for the replies....I thought 3.2.0.1 was the newest clockwork? I guess I need to pay more attention to the nook. lmao Mazook I think you are on the right track. Also to the phiremod is that the og droid equivalent to UD? hahahaha I actually liked the look of phiremod but i digress...
On that note I installed the uboot 1.2 and flashed it and it still boots into clockwork but that maybe because I may be on an outdated cwm im the one i stated above
Click to expand...
Click to collapse
If I remember correctly, you can't just jump from 3.0.0.6 or 3.0.1.0 to newest...there's one in between that transitions the upgrade in bootloaders...I'm pretty sure I went 3.0.1.0 to 3.0.2.8 to flashing Cm7 nightly 106...then to upgrade to Cwm 3.2.0.1 while in Rom manager, while using Cm7....leSigh....Clockworkmod is the only thing I can't stand about using my Nook....(though I rarely need it any more) AmonRa is such a better (and fully functional) recovery build...One thing I wish we had gotten.....
Sent from my NookColor using Tapatalk

What I did was....
back to stock today.
re-rooted.
installed Rom manager
Flashed Clockwork
It gave me 3.0.2.1
I searched for 3.0.2.8 and got posts back in december. Which one is it that i want?

oman0123 said:
What I did was....
back to stock today.
re-rooted.
installed Rom manager
Flashed Clockwork
It gave me 3.0.2.1
I searched for 3.0.2.8 and got posts back in december. Which one is it that i want?
Click to expand...
Click to collapse
While in Rom Manager, go to "flash older clockworckmod recoveries ".....then choose 3.0.2.8 (Make a nandroid first) and have all the stuff you want to flash ready to go on the SD...then go into recovery from Rom Manager, which will put you in 3.0.2.8......if that doesn't do it, try the same thing again, but go to 3.0.1.0 first....then, once you get into a working cm7 with 3.0.1.0, try it all again.(upgrade to 3.0.2.8 by" try it all again" , but this time from 3.0.1.0)...you're basically trying to reinstall your boot partition, but in a different location than where it is now...its a hassle, but you can do it through just rom manager.....it's just a hassle...
Sent from my NookColor using Tapatalk

mazook98 said:
While in Rom Manager, go to "flash older clockworckmod recoveries ".....then choose 3.0.2.8 (Make a nandroid first) and have all the stuff you want to flash ready to go on the SD...then go into recovery from Rom Manager, which will put you in 3.0.2.8......if that doesn't do it, try the same thing again, but go to 3.0.1.0 first....then, once you get into a working cm7 with 3.0.1.0, try it all again.(upgrade to 3.0.2.8 by" try it all again" , but this time from 3.0.1.0)...you're basically trying to reinstall your boot partition, but in a different location than where it is now...its a hassle, but you can do it through just rom manager.....it's just a hassle...
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Well Id love to try that but.....My nook wont turn on. It was fully charged today. Im either gonna make a bootable cwm or go back to stock and root again. I dont know if that will work though because its not even powering up.

Ok....i think im making progess....The newest nightly just goes into a bootloop. better than a clockwork bootloop i guess..... any advice on how to get it to install properly? i feel like im making progress. normal bootloops are better than what i was getting

Bueller............Bueller lmao.
Seriously though.....if anybody can figure this out it would make my year

Try this, install stock 1.2....
boot it up, go through the annoying setup, log into google apps, then power down.
Boot into CWR SD, this should have the os that you want already on it, and the google apps file.
THen click install from zip, choose zip, install the OS, after complete install google apps, then restart without sd
Do not format anything, it should do the trick.

Stuck on HTC Logo during boot

Running stable CM 7.0.3 with CWM 3.0.0.5
I've been getting some intermittent freezes waking from sleep, seems to be worse when the battery is getting low. Maybe it is a Launcher Pro issue? as that is my home and the culprit program when the Force Close or Wait dialogue pops up
I wanted to upgrade to v176 of our CM nightly to see if maybe that'd help but I can't seem to get past the white screen'd/green htc logo
Upgraded my CWM to latest ... nothing
Tried an Amon_RA recovery ... nothing
Re-downloaded latest gapps and tried multiple 'newer' roms multiple times ... nothing
Any ideas here? I used the two wipe everything scripts (only one works in CWM) multiple times before each effort to no avail
Restored from backup and I'm on 7.0.3 again but progress, even on this legacy device (thanks devs!) would be pretty sweet as I've been wanting to pitch it into a wall lately
...paitently waiting on the Epic Touch 4G or iPhone for Sprint, thanks all

mbarnwell said:
Running stable CM 7.0.3 with CWM 3.0.0.5
I've been getting some intermittent freezes waking from sleep, seems to be worse when the battery is getting low. Maybe it is a Launcher Pro issue? as that is my home and the culprit program when the Force Close or Wait dialogue pops up
I wanted to upgrade to v176 of our CM nightly to see if maybe that'd help but I can't seem to get past the white screen'd/green htc logo
Upgraded my CWM to latest ... nothing
Tried an Amon_RA recovery ... nothing
Re-downloaded latest gapps and tried multiple 'newer' roms multiple times ... nothing
Any ideas here? I used the two wipe everything scripts (only one works in CWM) multiple times before each effort to no avail
Restored from backup and I'm on 7.0.3 again but progress, even on this legacy device (thanks devs!) would be pretty sweet as I've been wanting to pitch it into a wall lately
...paitently waiting on the Epic Touch 4G or iPhone for Sprint, thanks all
Click to expand...
Click to collapse
I like to actually wipe instead of flashing a wipe. Try flashing the nightly on top of your current one, just wipe cache and dalvik cache before flashing.
Sent from my HTC Hero making C.R.E.A.M.

dastin1015 said:
I like to actually wipe instead of flashing a wipe. Try flashing the nightly on top of your current one, just wipe cache and dalvik cache before flashing.
Sent from my HTC Hero making C.R.E.A.M.
Click to expand...
Click to collapse
+1. I would go into recovery (I use CWM) and format system, cache, data, boot and then flash whatever rom you are trying to flash. Also, give it some time to boot up. Some roms can take a while. You can try the flashover too as Dastin suggested.
Are you using any tweaks like firerat's? There can be issues with that if your system partition is too small
Good luck!

That is a good idea
Keep rolling back versions of the ROM I want to try until something sticks.
Update the 'new' ROM to the latest version.
In the meantime, I've updated to CWM 4.0.1.5 and wiped everything possible at least twice. Plus a format all script. I will let you know if this does it for me

I still have not been able to flash any other roms, the only thing I can do is change recoveries and do nandroid restores. I am using the latest herodeck rom which is based on the CM roms. Hopefully someone will be able to help us.
And sorry about making a new post I was thinking that we were using different roms but I guess that they are actually pretty close to being the same.

[Q][Still not Solved] Nexus one getting buggy with 7.1 mod

Greetings fellowmen!!
Recently i thought of rooting my nexus 1. So i did some research and found out that the easiest way to do it was by unlocking the bootloader installing a custom recovery (I did Amon Ra) and then wiping the data\factory settings and flashing the cm 7.1 zip. So i did all the above and there you go....I had an n1 running cm 7.1 smoothly but then after a few hours it starts to piss me of. The problem is that whenever i lock the homescreen with the power button and wake it up again it just displays the main homescreen and does nothing i cannot navigate to the left or right homescreen cannot open app drawer in short it just hung up there doing nothing. I had to take out the battery atleast 15 times. I rebooted my device and it kept on giving me the same problem.
So then i reflashed cm 7.1 by wiping the data and factory settings and installing it again. But still it gave me the same problem. So then i thought of flashing 7.0.3 version instead and surprisingly that works like a charm. So is it the mod thats buggy or is it my phone.
One more question. I have the stock 2.3.4 gingerbread rom which i got from here!!
Code:
http://forum.xda-developers.com/showthread.php?t=1061648
This one in particular-
GRK39F OTA (stock vanilla - odexed, unrooted):
MD5: 35C8B4B9FD22DD4CA19C5D026E74411D
So to install this rom do i have to install it the same way i did cm by wiping data/factory settings and then installing flash from zip or is there any other way to do it ?
Thanks in advance for taking out valuable time and reading my long problem!!

I am running the latest version of CM 7.1 that was released within the last week or so without any issues. Got it from here. http://download.cyanogenmod.com/?type=stable&device=passion
Before that I was running the RC for 7.1. One thing to try it wiping multiple times before flashing. I assume you are running Amon RA 2.2.1, which is the latest. I have never had a problem with that recovery, however I flashed my ROM with this recovery. So far I think I like it better than Clockwork and Amon.
http://forum.xda-developers.com/showthread.php?t=1291970
As for installing other ROMs yes you do flash them the same way you flashed CM.

So are you saying that it was the recovery that was causing the problem?
Yes I am using the latest Amon Ra 2.2.1 version.
I also got the rom from that link.
And can you explain whats the difference between all these recoveries?
Thanks for replying!

I am not saying it is the recovery, I highly doubt that is the problem. I was just comparing differences. There does not seem to be much difference in the recoveries for what you are trying to do. The recovery I am running is a fairly new one that I just wanted to test out. I do think I like it better than the others.
First thing I would do is wipe 3, 4 or 5 times before flashing. I have had rare occasions where a single wipe would not do it for me. Also have you verified the Checksum of the CM download? Does recovery say it installed successfully? I have also had error installing a ROM in recovery but then had the phone still load the ROM.

Yes i did check the md5 checksums and they match perfectly. Though i did wipe it out only one time so maybe that could be the problem. I think i should get clockworkmod and wipe it through that and then flash cm 7.1. Amon RA doesnt really give us the option of wiping the system partition. right?

Correct Amon Ra does not have an option to format system partition. It's recommend you also wipe system when coming from a different ROM.
Try this file by temasek's, format-signed.zip
http://www.mediafire.com/?8vbd13b440coxx6
just flash it in recovery and it will clean everything, now you can flash CM7.1 again

Are you sure you can't wipe the system with Amon? I remember having that option, but it's been several months since I have used that recovery. Kind of makes me want to flash it to find out.
Before flashing a different ROM I always wipe system, cache and dalvik cache. It is definitely important to wipe the system before flashing a new ROM. I'm sure that is where your problem lies.

No, ClockworkMod has it, but Amon_RA doesn't. Supposedly it is in the works for the next version, but that was a long time ago when I heard that (probably back when v3 for clockworkmod came out).

I did a nandroid backup and flashed the format zip file and then flashed cm 7.1 and its giving me the same problem!!
I had to restore and go back to 7.0.3
Why is this happening
Edit: I also wiped the dalvik cache and factory reset it also but still it just freezes!!

Any advise?

Have you tried downloading the file again maybe form another location I doubt this is the problem but sometimes it's something you don't expect.
You could try from here http://wiki.cyanogenmod.com/index.php?title=Latest_Version

But how does it matter I checked the md5 checksum and it matches!!

Why not stay on CM7.0.3 theres not much difference between the 2
if you dont want to i suggest to try to flash Clockwork recovery and do a full wipe then reflash CM7.1

But still I want to see how 7.1 is!
The main point here is to upgrade and not taking the alternative of staying at the older version!

Please guys any help would be appreciated!!

Doesn't CM7 need clockworkmod 3.x?? Try to flash CWM3.x over Amon if you can get your hands on the flashable zip or if you can get into a working rom, use romManager to switch from amon.

thealphamale05 said:
Doesn't CM7 need clockworkmod 3.x?? Try to flash CWM3.x over Amon if you can get your hands on the flashable zip or if you can get into a working rom, use romManager to switch from amon.
Click to expand...
Click to collapse
Make no different if you use amon Ra or CWM. I would definitely stay away from cwm 3.x or higher if you're using sd-ext

Looks like Ill have to stay with 7.0.3 there doesnt seem to be a solution!!