I have 2 nook colors one for me and one for my girlfriend, I am/was running CM 7 on them. Its been awhile since ive updated them. Ive tried the newest nightly and the latest STABLE release. Both got hung up on the same spot. The green CM logo will say its loading then it will go into a black screen lit by the backlight and just hangs there. no boot animation, no boot loop. Just sits there. Or It will just reboot itself back into clockwork after saying it installed the rom. Ive used the CWM removal and that made it just hung on a nook bootup screen.
Ive let it sit for 15 minutes and nothing. Im not new as ive rooted my og droid, my dx and 2 nook colors. I havent really had this issue with the nooks. not really sure what to do. Ive wiped data/cache formatted the symsted, data and cache and nothing.
My steps are as follows.
1)Download either Phiremod test 7 or ANY CM nightly
2) plug my data sdcard into my computer and transfer
3)boot into clockwork
4)Wipe pretty much everything (I also tried installing on top of the stable releases)
5)Install.
I know to expect issues but there HAS to be something im doing wrong that lets one nook install flawlessly and another nook that wont install any nightly or test build. If it didnt boot up they wouldnt leak the nightly. Its something on my end. I gotta figure it out
I also just went back to stock and re-rooted and I have the same issue
oman0123 said:
I have 2 nook colors one for me and one for my girlfriend, I am/was running CM 7 on them. Its been awhile since ive updated them. Ive tried the newest nightly and the latest STABLE release. Both got hung up on the same spot. The green CM logo will say its loading then it will go into a black screen lit by the backlight and just hangs there. no boot animation, no boot loop. Just sits there. Or It will just reboot itself back into clockwork after saying it installed the rom. Ive used the CWM removal and that made it just hung on a nook bootup screen.
Ive let it sit for 15 minutes and nothing. Im not new as ive rooted my og droid, my dx and 2 nook colors. I havent really had this issue with the nooks. not really sure what to do. Ive wiped data/cache formatted the symsted, data and cache and nothing.
My steps are as follows.
1)Download either Phiremod test 7 or ANY CM nightly
2) plug my data sdcard into my computer and transfer
3)boot into clockwork
4)Wipe pretty much everything (I also tried installing on top of the stable releases)
5)Install.
I know to expect issues but there HAS to be something im doing wrong that lets one nook install flawlessly and another nook that wont install any nightly or test build. If it didnt boot up they wouldnt leak the nightly. Its something on my end. I gotta figure it out
I also just went back to stock and re-rooted and I have the same issue
Click to expand...
Click to collapse
You probably have the wrong bootloader and kernel...the newest cm7s are based on the 2.6.32, not the older 2.6.29 (or something), and the newest 1.2 bootloader..which you probably don't have if it's "been awhile"..lol...You have to upgrade your Cwm first, from 3.0.1.0 to 3.0.2.8, I think, then flash your Cwm to a nightly after 86??(Google to check), and it will change your boot partition to the correct one...If your nook still says "touch the future", you're on the wrong bootloader.....Also, quit using Phiremod.....it's a copy of Cm7 first of all, but by the time it's released, it's already outdated, it's not updated like it should be, and it's Douchey. Google the basics of what I described above if it sounds like that might be your problem and lmk how it works out for you....Btw....I used nightly 106 for this exact thing on another of my Nooks a few days ago and it worked flawlessly...There are newer nightlies out, but that one for sure worked.....
Sent from my NookColor using Tapatalk
I might be confused; Is one of your Nooks OK or are they both refusing to boot anything based on the .32 Linux kernel?
As I read it you aren't having trouble loading either with 7.0.3 stable. Correct?
The only thing I could suggest is loading the stable version, downloading the latest nightly CM (skip Phiredrop's theme for now) DIRECTLY to the SD card (skip the computer step), and do a factory reset and format boot, system, data, and cache (all four).
Load just the nightly and gapps (save the OC kernel for later), and then see if THAT boots all the way up.
Of course make sure you have a full backup of the stable OS install before you start.
If none of that works, then prepare the SD card as an install card and try that. Do you have just the one card?
Thanks for the replies....I thought 3.2.0.1 was the newest clockwork? I guess I need to pay more attention to the nook. lmao Mazook I think you are on the right track. Also to the phiremod is that the og droid equivalent to UD? hahahaha I actually liked the look of phiremod but i digress...
On that note I installed the uboot 1.2 and flashed it and it still boots into clockwork but that maybe because I may be on an outdated cwm im the one i stated above
DiDGR8 said:
I might be confused; Is one of your Nooks OK or are they both refusing to boot anything based on the .32 Linux kernel?
As I read it you aren't having trouble loading either with 7.0.3 stable. Correct?
The only thing I could suggest is loading the stable version, downloading the latest nightly CM (skip Phiredrop's theme for now) DIRECTLY to the SD card (skip the computer step), and do a factory reset and format boot, system, data, and cache (all four).
Load just the nightly and gapps (save the OC kernel for later), and then see if THAT boots all the way up.
Of course make sure you have a full backup of the stable OS install before you start.
If none of that works, then prepare the SD card as an install card and try that. Do you have just the one card?
Click to expand...
Click to collapse
Ive tried all of that. hopefull mazooks way works. Otherwise im out of ideas
oman0123 said:
Thanks for the replies....I thought 3.2.0.1 was the newest clockwork? I guess I need to pay more attention to the nook. lmao Mazook I think you are on the right track. Also to the phiremod is that the og droid equivalent to UD? hahahaha I actually liked the look of phiremod but i digress...
On that note I installed the uboot 1.2 and flashed it and it still boots into clockwork but that maybe because I may be on an outdated cwm im the one i stated above
Click to expand...
Click to collapse
If I remember correctly, you can't just jump from 3.0.0.6 or 3.0.1.0 to newest...there's one in between that transitions the upgrade in bootloaders...I'm pretty sure I went 3.0.1.0 to 3.0.2.8 to flashing Cm7 nightly 106...then to upgrade to Cwm 3.2.0.1 while in Rom manager, while using Cm7....leSigh....Clockworkmod is the only thing I can't stand about using my Nook....(though I rarely need it any more) AmonRa is such a better (and fully functional) recovery build...One thing I wish we had gotten.....
Sent from my NookColor using Tapatalk
What I did was....
back to stock today.
re-rooted.
installed Rom manager
Flashed Clockwork
It gave me 3.0.2.1
I searched for 3.0.2.8 and got posts back in december. Which one is it that i want?
oman0123 said:
What I did was....
back to stock today.
re-rooted.
installed Rom manager
Flashed Clockwork
It gave me 3.0.2.1
I searched for 3.0.2.8 and got posts back in december. Which one is it that i want?
Click to expand...
Click to collapse
While in Rom Manager, go to "flash older clockworckmod recoveries ".....then choose 3.0.2.8 (Make a nandroid first) and have all the stuff you want to flash ready to go on the SD...then go into recovery from Rom Manager, which will put you in 3.0.2.8......if that doesn't do it, try the same thing again, but go to 3.0.1.0 first....then, once you get into a working cm7 with 3.0.1.0, try it all again.(upgrade to 3.0.2.8 by" try it all again" , but this time from 3.0.1.0)...you're basically trying to reinstall your boot partition, but in a different location than where it is now...its a hassle, but you can do it through just rom manager.....it's just a hassle...
Sent from my NookColor using Tapatalk
mazook98 said:
While in Rom Manager, go to "flash older clockworckmod recoveries ".....then choose 3.0.2.8 (Make a nandroid first) and have all the stuff you want to flash ready to go on the SD...then go into recovery from Rom Manager, which will put you in 3.0.2.8......if that doesn't do it, try the same thing again, but go to 3.0.1.0 first....then, once you get into a working cm7 with 3.0.1.0, try it all again.(upgrade to 3.0.2.8 by" try it all again" , but this time from 3.0.1.0)...you're basically trying to reinstall your boot partition, but in a different location than where it is now...its a hassle, but you can do it through just rom manager.....it's just a hassle...
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Well Id love to try that but.....My nook wont turn on. It was fully charged today. Im either gonna make a bootable cwm or go back to stock and root again. I dont know if that will work though because its not even powering up.
Ok....i think im making progess....The newest nightly just goes into a bootloop. better than a clockwork bootloop i guess..... any advice on how to get it to install properly? i feel like im making progress. normal bootloops are better than what i was getting
Bueller............Bueller lmao.
Seriously though.....if anybody can figure this out it would make my year
Try this, install stock 1.2....
boot it up, go through the annoying setup, log into google apps, then power down.
Boot into CWR SD, this should have the os that you want already on it, and the google apps file.
THen click install from zip, choose zip, install the OS, after complete install google apps, then restart without sd
Do not format anything, it should do the trick.
Related
I rooted my Sprint Hero and have been able to successfully flash and operate Fresh 2.3.3 but CANNOT figure out how to get CM6 to boot. I wiped prior to attempting the flash but all that happens is a lockup on the HTC boot screen. I have attempted to flash it twice, and waited about 20 minutes the first time and 45 the second time with no progress, eventually having to pull the battery and reboot in recovery mode. I was only able to wipe the data but when I tried to wipe the delvik cache, it told me I needed to do it via ADB. I tried to partition my SD card but it ended up cutting the available memory in half, and erasing my backup, and I had to use an external card reader to reload Fresh so that I could actually use my phone (which IS fully functional now). Should I be wiping EVERYTHING on the phone (including the battery and rotate info)? What am I missing?
I have heard nothing but great things about CM6 and am very disappointed that I cannot get it to work. Can anyone help?
Sprint HTC Hero
Firmware version: 2.1-update 1
Software version: 2.27.651.6
try wiping your ext partition
I wiped everything that the recovery menu would allow me to prior to the first attempt at flashing and it wouldn't load. I pulled the battery and rebooted to the recovery menu then partitioned the SD card, wiped just prior to the second attempt at re-flashing, re-flashed and it still locked up at the HTC screen.
I like to think I'm pretty computer savvy but I just can't figure this out. Why would Fresh 2.3.3 load without a hitch, but CM6 not?
make sure you recovery is 1.6 or 1.7 to be able to wipe dalvik i had same prob
My recommendation would be flashing the recovery in this thread here.
This the recovery I used while I was using Fresh 2.3.3, and when I upgraded to the CM6 Nigtlies.
I say Flash The Custon Amon_RA 1.7 in Darchdroid thread->NANDROID!!!!->Wipe Data->Dalvik->sd-ext(if using apps2sd)->Flash RC1 or Latest Nightly (your choice)->Flash Optionally Google Apps->Optionally Flash Uncapped Kernel and/or Battery Tweak(I use the uncapped Kernel, and not the battery tweak, and I get 24 hours+ with average use)
Try that out.
Funny, im running into the same problem after flashing the wrong blackmod... wiped, reflashed cm and now it wont go past the htc white boot screen
It did boot before though which is odd
Edit: Wiped, wiped dalvik and ext part, flashed rom and gapps, working just fine now... will flash batt tweak, bm and round clock in a min, hopefully it doesn't break it
jUgGsY,
Thank you for being so thorough in your response, it all makes sense! My only issue now is trying to re-flash the recovery image. I downloaded the RA-Darchstar image but I'm not sure if it's correctly being pushed to the SD card (all I get is a long list of ADB commands, no particular confirmation) and when I try to flash the image, I get a message telling me that it can't find the partition. What does this mean? Is the recovery image really that important to the updated ROM? How come there is no specific recovery image recommended on the CM forum?
EDIT: I found directions from the Unlockr on the youtubes. Gonna give it a try and see how it goes after that...
So it was decadence#7 kernel that was screwing up my boot... removed it and using stock darchstar
Ok... this is getting ridiculous.
*I flashed the RA-Darchstar (1.7) recovery image
*NANDROIDed
*Wiped data, cache, Dalvik and sd-ext
*Flashed RC1
*Flashed the google addon
*Rebooted
Been waiting for the damn thing to boot for almost 30 minutes now, still stuck on the HTC screen. Can anyone tell me what is going on?
jordanjackthomas said:
Ok... this is getting ridiculous.
*I flashed the RA-Darchstar (1.7) recovery image
*NANDROIDed
*Wiped data, cache, Dalvik and sd-ext
*Flashed RC1
*Flashed the google addon
*Rebooted
Been waiting for the damn thing to boot for almost 30 minutes now, still stuck on the HTC screen. Can anyone tell me what is going on?
Click to expand...
Click to collapse
Are you flashing RC1 or one of the nightly ones? I had the same issue with RC1. I could not get it to boot past the HTC screen. However, the nightly ones flash just fine. I would suggest flashing a nightly. I now see you said RC1, lol. Try the latest nightly.
It looks like I will have to go with a nightly. Are there any that you recommend? The most recent or one from a few nights back?
jordanjackthomas said:
It looks like I will have to go with a nightly. Are there any that you recommend? The most recent or one from a few nights back?
Click to expand...
Click to collapse
The latest one seem to be very good. 8/22 but make sure you download the latest google apps for it also.
For some reason, I couldn't get any variation of CM to load on my phone (CM6 or the Vanilla variant). I went with Darch's LegendROM and it is excellent - much better than stock 2.1 for the Hero! Really fast and has some neat extra features. I noticed, though, that my reception is kind of bad now and I usually have excellent coverage at my house. I already downloaded the most up-to-date Sprint radio (2.42.01.04.27) but was just curious: do I need to wipe and re-flash the image FIRST or can I just flash the radio image over the already installed ROM?
AND: Please excuse my inexperience with all of this, but I'm about to ask two already answered questions: I'm not looking for long-winded answers but if someone could point me to a relevant thread, it would be GREATLY appreciated.
1) I keep getting a "process com.google.android.googleapps has stopped working" error when I try to sync with my gmail account. How do get this to work?
2) I remember reading that there was a known MMS issue with Darch's DroidROM, not any issue with the LegendRom, but I just received a "generic network failure" message when my wife tried to send me picturemail. Is there a workaround for this?
Thank you all for your patience!
Is there a way to get rid of the clockwork mod boot on the nook color
As per onstuctions on this site, I got a 1.1 pre roote version and installed it
from the sd card with the clockwork menu which informed me that the
"NookColor" install complete.
when I reboot, it starts with the welcome message,but then only reboots into the same recovery menu.
At this point I would just like to go back to a stock rom, but cannot boot anything but the recovery.
By the way, I can boot froyo from the sd card
Please help me
I've moved your thread to the correct forum.
So you dont have the CWR sdcard in? Because if you did, you would need to remove that first. Sorry if this dumb, but thats all I can think of right now. Maybe reflash the 1.1 pre rooted rom? Or follow the instructions in Samuelhalff's "Easily restore to stock" thread located here in the Nook forums.
The "Easily restore to stock" saved the day. I am now up and running.
Thanks
How did you do that? I have CWR on mine and I went to buy a book from the shop on the Nook and it downloaded and installed 1.1... Now when I try to go back and restore from backup CWR doesn't respond... All it does is sit there and if I select something from the menu it goes to the background image (the circle with the top hat) and sits there. I would like to remove this so I can reroot my Nook...
Thanks for any help.
Bob
See the other thread or sticky that's labeled "How to Restore to Stock easiliy." I believe you can also use the power down and on 8 times trick to restore to stock as well.
Same thing happened to me. I used Clockwork to flash the CWR-removal.zip on the restore thread mentioned above and it fixed my boot, everything else was OK.
porear said:
Same thing happened to me. I used Clockwork to flash the CWR-removal.zip on the restore thread mentioned above and it fixed my boot, everything else was OK.
Click to expand...
Click to collapse
Ditto that. I reinstalled CW and everything seems to be working fine. Has anyone else had issues with using Rom Manager on the NC? I've had to go back to stock twice whenever I've used it.
I had a problem when trying to roll my 1.1 rooted NC back to stock because I futzed it up that I ended up in a CWR loop. 8 resets didn't get me a reflash, it got a recovery. Took me finally getting the NC flashed and rerooted at 1.1 a second time when I reinstalled ROM Manager and ended up with the problem again. Took me this wasted effort to realize that CWR runs in lieu of the reflash if CWR is installed and that's an obvious problem when I wanted a reflash and not restore a different backup.
There is a thread with a zip that CWR can run that blasts CWR off and reflashs stock and getting that done put me back both times I messed up above.
Seems to me that perhaps the whole "can never brick" response when people ask for help needs to have an addendum about how CWR gets in the way of an 8 reboot reflash and provide guidance on how to get that update file and use it instead to get back to square one. (Plus some advice on when to clear caches and data partitions to avoid weirdness later).
Now rerooted on 1.1 with no ROM Manager running but I'm missing the nandroid bacjup capability, so maybe I reinstall but stay away from the recovery option until I need it?
I reinstalled CW after I rerooted 1.1 and have had no problems with it so far, but I also haven't tried to backup or anything since the first time (which initially got me into this mess).
I do think you're right about having some sort of addendum thrown in. I was running circles around the XDA forums for a few hours trying to find some sort of fix the first time my Nook started acting weird. The 8-reboot trick just wouldn't work, and my battery was more or less drained because CW was interfering. Maybe this is just understood by most, but it certainly would have saved me some time (and some gray hairs) if someone had mentioned it earlier.
So what is the conclusion of this thread? I have a new NC, updated to 1.1 and installed AutoNooker 3.0, immediately installed Clockwork and did a NAND backup... bad thing is that it won't boot off the eMMC anymore, only CW.
I can boot roms off of the SD card (ie Honeycomb) but this isn't want I want. I've downloaded and flashed several roms but its looped at CW. So the rom isn't the problem.
If we can't install Clockwork Recovery, then how can we flash new roms to the eMMC?
[UPDATE]
Found a flashable file which removes Clockwork Recovery.
http://www.etoile-laconnex.com/CWR-removal-rootsafe.zip
After I flashed that I am now booting off the eMMC froyo rom. Nice! Saved me from Restoring it, updating it, and reRooting it.
[UPDATE 2]
Well while it worked initially, it loaded the homescreen and reset. Now it is stuck at the "Touch the Future of Reading" screen with no Recovery... which worse off. Now I have to make a CWM bootable SD, flash the restore, and start over. Nice.
[UPDATE 3]
Finally got it back to stock after hours. I found a "MonsterPack" here:
http://forum.xda-developers.com/showthread.php?t=922870
Even this was more complicated then it needed. I had to download the 128mb RootPack image, and get it going so I can grab the needed root files. Then download the right size Clockwork image for my memory card and get it going. The end result ended in a Clockwork SD card. Then I made a "sdcard" folder from where I added the rootpack files and the stock image 1.0.1 flashable zip file.
Format the system and boot partitions, then flash the stock zip.
I just upgraded stock to 1.1, then will proceed to boot off the microsd and root, install GAPPS, etc.
I wish I knew of a great custom rom to flash. I flashed Nookie Froyo 0.6.8 and it powers down immediately (several complaints about this). Maybe CM7?
Ditto
I'm having this problem as well, but I can't seem to do anything to fix it. I was running 1.1, and auto-nootered using v3.0. Everything was hunky dory until I installed CWR. I flashed, shutdown, restarted, then chose to perform a backup which brought me down into CWR and I was never able to get out. I used the Monster pack zip to remove CWR, and now I boot to the "n" screen and sit forever. I tried the 8 hard resets and it said it installed on two different occasions, but still I sit on the "n" screen during boot. I tried the 1.0.1 restore zip as well, but to no avail. What do I need to do to get back up and running?
CW Recovery only
So I flashed my NC with both the pre-dualboot and the dual-honeycomb rom, but every time I reboot with the SD card inserted, it only boots to CW recovery. When I take it out..it boots to NC stock OS.
Am I suppose to remove clockwork recovery with the CW-removal zip? I tried that.. once it rebooted it went right back to CW. Should I be using two different SD cards? One for CW recovery and one to load the eMMc?
So confused...
What I need to know is what should be on the SD card after everything is flashed.
Mw : you could use a bootable cwr sdcard and flash 'emmc recovery repair', then format data and restore your backup.
Ehamonn: you have to remove cwr from the sdcard. Format should do the trick. But you'll loose the data on it..
Sent from my Desire HD using XDA App
Do I need to keep a boot image on the card after I format?
Well, if you only want to boot from internal memory, no.
I tried to install CM7 right out of the box and now I have read and tried every option to try to get my nook back to at least stock.
I'm coming from the Nexus S scene where a good fresh nandroid back up work like a charm.
I'm thinking it might not be so easy with my nook color, but I figured it's worth a shot.
If any one has a nandroid back up stock or a fresh CM7 install, I would love to give it a try because the only thing I can do with my nook is boot into Clockwork from an SD card!!!!!
Any help would be great, I have been reading an searching, maybe I'm just missing something.
What?
You're crazy.
Use and SD image of clockwork.
Download CM7, gapps, OC'd kernel to it
format system, data, cache.
Flash CM7, gapps, OC'd kernel.
Reboot.
kmmxracer said:
I tried to install CM7 right out of the box and now I have read and tried every option to try to get my nook back to at least stock.
I'm coming from the Nexus S scene where a good fresh nandroid back up work like a charm.
I'm thinking it might not be so easy with my nook color, but I figured it's worth a shot.
If any one has a nandroid back up stock or a fresh CM7 install, I would love to give it a try because the only thing I can do with my nook is boot into Clockwork from an SD card!!!!!
Any help would be great, I have been reading an searching, maybe I'm just missing something.[/QUOTE/]
You have a couple of options. You can flash the latest nightly from recovery using your sd card follow instructions for that.(must use 3.0.1.0). Remove the card before you reboot. Also, if you want clockwork internally, grab the 3.0.1.0 from the link below and flash it with your sd card, then the rom. If you are flashing something stock, you would need to use clockwork 3.0.0.5.
forum.xda-developers.com/showthread.php?t=958748
Click to expand...
Click to collapse
ace7196 said:
What?
You're crazy.
Use and SD image of clockwork.
Download CM7, gapps, OC'd kernel to it
format boot, system, data, cache.
Flash CM7, gapps, OC'd kernel.
Reboot.
Click to expand...
Click to collapse
Do NOT NOT NOT format /boot while prepping for CM7 installation!!!
RoboRay said:
Do NOT NOT NOT format /boot while prepping for CM7 installation!!!
Click to expand...
Click to collapse
Hehe. My bad. Came from formatting my gf's Gtab. Had to do it to get 2.3 AOSP on there.
bdcrim said:
kmmxracer said:
I tried to install CM7 right out of the box and now I have read and tried every option to try to get my nook back to at least stock.
I'm coming from the Nexus S scene where a good fresh nandroid back up work like a charm.
I'm thinking it might not be so easy with my nook color, but I figured it's worth a shot.
If any one has a nandroid back up stock or a fresh CM7 install, I would love to give it a try because the only thing I can do with my nook is boot into Clockwork from an SD card!!!!!
Any help would be great, I have been reading an searching, maybe I'm just missing something.[/QUOTE/]
You have a couple of options. You can flash the latest nightly from recovery using your sd card follow instructions for that.(must use 3.0.1.0). Remove the card before you reboot. Also, if you want clockwork internally, grab the 3.0.1.0 from the link below and flash it with your sd card, then the rom. If you are flashing something stock, you would need to use clockwork 3.0.0.5.
forum.xda-developers.com/showthread.php?t=958748
Click to expand...
Click to collapse
Thank you. Sorry for the delay but I'm sure the problem was I was following a guide that linked and old version of Clockwork.
It all worked perfect once I had 3.0.1.0
Click to expand...
Click to collapse
My boot went corrupt with CM 7.0.2. I was able to restore to stock with no problem, but everytime I attempt to install CM 7 (stable or nightly), I get a black screen except for a little white/light blue line in the upper right corner.
I use the 3.0.0.5 Recovery with the directions in the following link.
http://forum.xda-developers.com/showthread.php?t=949699
Does anyone have an idea why this happens? I do remove the SD recovery card, and insert a blank SD card before rebooting.
Any help would be much appreciated!
Use 3.0.2.8 recovery
Thanks, I'll give that a shot right quick.
NewZJ said:
Use 3.0.2.8 recovery
Click to expand...
Click to collapse
Tried it and it boots back to the black screen with the line in the upper right corner.
Here's what I did.
Made the bootable sd card, copied over lastest build of cm7 and gapps.
Installed zips.
wiped data.
switch sd cards, rebooted
also tried it w/o wiping data.
Is there anything I'm doing wrong?
Wiping cache?
NewZJ said:
Wiping cache?
Click to expand...
Click to collapse
Should I do that before or after installing the zips?
wipe system, data, cache, then flash zips
NewZJ said:
wipe system, data, cache, then flash zips
Click to expand...
Click to collapse
Just tried that, no dice. It's still going back to the same screen.
Download the cm7 again, might be corrupt
NewZJ said:
Download the cm7 again, might be corrupt
Click to expand...
Click to collapse
Just downloaded a stable release, and it works. Is there any reason why the Nightly 80 wouldn't work, even after re-downloading it?
I'm also dealing with the same issue as well. The problem started when I tried to update from nightly 76 to 77. I also tried to flash to nightly 80, but no luck. I'm flashing a stable release now.
Edit: Flashing the stable release also worked for me. However, I wasn't able to flash the latest nightly over the stable build.
Yep.
Same problem here.
The stable works, boots fine, but the nightlies won't boot.
They go into the same flashing blue line.
I tried all the advice I could find, wipe system, cache, data and tried restoring to stock, still no dice.
I am using CWM 3.0.2.8.
I'm just a different flash method (verygreen's SD install), but found that nightlies beyond 75 won't boot without installing the .32 OC kernel. There's a discussion in both cyanogenmod experimental nook forum and in the dev forum here about it.
I guess I'll just wait until they resolve the issue then. I was really wanting to see how well the deep sleep worked.
Finally got the latest nightly from today with OC kernel and gapps. Running great so far. Just waiting on market being able to download.
My NC is about six months old (long before the "blue dot"). I've rooted it and wiped it and installed at least three versions of CM7, two of Phiremod's (one CM7 based and one MIUI) and two versions of MIUI. Never had a problem. Now I do. For some reason, and I can't even figure out what I did, my Nook will not boot. It hangs at the Cyanogen logo screen (not the blue circled Android, just a simple green logo). I used CWM (newest version) to boot into recovery and wiped everything, then reinstalled CM7. Hangs at the same place. I used CWM to boot into recovery, went to mounts and reformatted everything, then manually rebooted, then reinstalled CM7. Hangs at the same place. I reformatted everything and tried installing MIUI 1.85. Hangs at the same place. I reformatted everything, rebooted, wiped everything, then installed nook-complete-restore-1.0.1.zip to try to get it back to stock. Boots to the "N" and then HANGS! WTF?? I must be missing something but I can't figure out what. Help!
Maybe try a different version of cwr? create a bootable sdcard with cm7 and then run ROM manager, there is an option to install older versions of cwr
Sent from my ADR6400L using Tapatalk
I used CWM (newest version) to boot into recovery and wiped everything, then reinstalled CM7.
Click to expand...
Click to collapse
What version might that be? The latest is 3.2.0.1.......
Try a different SD card or writing a different image to the card. I had the same problems you are describing. I used eyeballers image (sorry I don't have the link) and I finally got things to.work
Sent from my NookColor using XDA Premium App