Database Develop

[Q] Cannot get CM6 to boot

I rooted my Sprint Hero and have been able to successfully flash and operate Fresh 2.3.3 but CANNOT figure out how to get CM6 to boot. I wiped prior to attempting the flash but all that happens is a lockup on the HTC boot screen. I have attempted to flash it twice, and waited about 20 minutes the first time and 45 the second time with no progress, eventually having to pull the battery and reboot in recovery mode. I was only able to wipe the data but when I tried to wipe the delvik cache, it told me I needed to do it via ADB. I tried to partition my SD card but it ended up cutting the available memory in half, and erasing my backup, and I had to use an external card reader to reload Fresh so that I could actually use my phone (which IS fully functional now). Should I be wiping EVERYTHING on the phone (including the battery and rotate info)? What am I missing?
I have heard nothing but great things about CM6 and am very disappointed that I cannot get it to work. Can anyone help?
Sprint HTC Hero
Firmware version: 2.1-update 1
Software version: 2.27.651.6

try wiping your ext partition

I wiped everything that the recovery menu would allow me to prior to the first attempt at flashing and it wouldn't load. I pulled the battery and rebooted to the recovery menu then partitioned the SD card, wiped just prior to the second attempt at re-flashing, re-flashed and it still locked up at the HTC screen.
I like to think I'm pretty computer savvy but I just can't figure this out. Why would Fresh 2.3.3 load without a hitch, but CM6 not?

make sure you recovery is 1.6 or 1.7 to be able to wipe dalvik i had same prob

My recommendation would be flashing the recovery in this thread here.
This the recovery I used while I was using Fresh 2.3.3, and when I upgraded to the CM6 Nigtlies.
I say Flash The Custon Amon_RA 1.7 in Darchdroid thread->NANDROID!!!!->Wipe Data->Dalvik->sd-ext(if using apps2sd)->Flash RC1 or Latest Nightly (your choice)->Flash Optionally Google Apps->Optionally Flash Uncapped Kernel and/or Battery Tweak(I use the uncapped Kernel, and not the battery tweak, and I get 24 hours+ with average use)
Try that out.

Funny, im running into the same problem after flashing the wrong blackmod... wiped, reflashed cm and now it wont go past the htc white boot screen
It did boot before though which is odd
Edit: Wiped, wiped dalvik and ext part, flashed rom and gapps, working just fine now... will flash batt tweak, bm and round clock in a min, hopefully it doesn't break it

jUgGsY,
Thank you for being so thorough in your response, it all makes sense! My only issue now is trying to re-flash the recovery image. I downloaded the RA-Darchstar image but I'm not sure if it's correctly being pushed to the SD card (all I get is a long list of ADB commands, no particular confirmation) and when I try to flash the image, I get a message telling me that it can't find the partition. What does this mean? Is the recovery image really that important to the updated ROM? How come there is no specific recovery image recommended on the CM forum?
EDIT: I found directions from the Unlockr on the youtubes. Gonna give it a try and see how it goes after that...

So it was decadence#7 kernel that was screwing up my boot... removed it and using stock darchstar

Ok... this is getting ridiculous.
*I flashed the RA-Darchstar (1.7) recovery image
*NANDROIDed
*Wiped data, cache, Dalvik and sd-ext
*Flashed RC1
*Flashed the google addon
*Rebooted
Been waiting for the damn thing to boot for almost 30 minutes now, still stuck on the HTC screen. Can anyone tell me what is going on?

jordanjackthomas said:
Ok... this is getting ridiculous.
*I flashed the RA-Darchstar (1.7) recovery image
*NANDROIDed
*Wiped data, cache, Dalvik and sd-ext
*Flashed RC1
*Flashed the google addon
*Rebooted
Been waiting for the damn thing to boot for almost 30 minutes now, still stuck on the HTC screen. Can anyone tell me what is going on?
Click to expand...
Click to collapse
Are you flashing RC1 or one of the nightly ones? I had the same issue with RC1. I could not get it to boot past the HTC screen. However, the nightly ones flash just fine. I would suggest flashing a nightly. I now see you said RC1, lol. Try the latest nightly.

It looks like I will have to go with a nightly. Are there any that you recommend? The most recent or one from a few nights back?

jordanjackthomas said:
It looks like I will have to go with a nightly. Are there any that you recommend? The most recent or one from a few nights back?
Click to expand...
Click to collapse
The latest one seem to be very good. 8/22 but make sure you download the latest google apps for it also.

For some reason, I couldn't get any variation of CM to load on my phone (CM6 or the Vanilla variant). I went with Darch's LegendROM and it is excellent - much better than stock 2.1 for the Hero! Really fast and has some neat extra features. I noticed, though, that my reception is kind of bad now and I usually have excellent coverage at my house. I already downloaded the most up-to-date Sprint radio (2.42.01.04.27) but was just curious: do I need to wipe and re-flash the image FIRST or can I just flash the radio image over the already installed ROM?
AND: Please excuse my inexperience with all of this, but I'm about to ask two already answered questions: I'm not looking for long-winded answers but if someone could point me to a relevant thread, it would be GREATLY appreciated.
1) I keep getting a "process com.google.android.googleapps has stopped working" error when I try to sync with my gmail account. How do get this to work?
2) I remember reading that there was a known MMS issue with Darch's DroidROM, not any issue with the LegendRom, but I just received a "generic network failure" message when my wife tried to send me picturemail. Is there a workaround for this?
Thank you all for your patience!

Boot Loop

Please Help I installed a custum ROM and now I am stuck in a loop a skull comes up and droid and it continues till the battery is dies. I have tried to factory reset and nothing the only way to turn it off is to remove the battery can someone please Help

If the ROM is what's causing the problem, doing a factory reset won't change anything; it'll stil keep the same ROM in place. What you might want to do is download a more popular ROM, like a CM7 nightly, put it on your microSD card (using another phone or a microSD adapter, of course) and boot into recovery and flash that.
If that doesn't work, I dunno then. I got a bootloop the other day after using ROM Manager to flash a new kernel. Turns out it was the kernel because after a factory reset, it booted up fine. So I just chose another kernel and it's all good now.
You just might have a screwy ROM. Try reflashing it if you can. What was the custom ROM, btw?

Yeah I'd agree with the above; install another ROM and make sure to wipe cache and dalvik and if it still doesn't work wipe data as well. Note that wiping data will wipe pretty-much everything on your phones memory (SMS messages, contacts, accounts etc)

when it is cm7 than you should take an other kernel
Please, if you are experiencing random reboots (that involve the M logo) or prolonged screen freezes, you should revert to an older beta kernel that is free of the DSI errors. To do so, replace the boot.img in the update-cm-7...zip package with this one (from 0.04 version): http://code.google.com/p/cyanogenmod4milestone/downloads/detail?name=bootimg0.04.zip
Click to expand...
Click to collapse

Stole that from another Thread:
_Flash with any rom you have
_Milestone will auto reboot after flash done and loop
_Don't worry about that, remove battery in 5s and re-plugin
_Turn on your milestone: hold X and POWER to access Recovery. Select Wipe and reboot

Do you have a Droid or a Milestone? If you have a Milestone, which country is the device from?
I had a boot loop issue too on my UK Milestone when I tried to install CM6.1.2, version 28.01.2011 0.07-11.01.28. (http://android.doshaska.net/cm6)
This is what I did to fix the problem...
- Flashed UK 2.1 SBF file
- Flashed Vulnerability Recovery
- Rooted the phone
- Installed and booted into OpenRecovery
- Installed 15.01.2011 0.06-11.01.15 version (phone booted fine)
- Rebooted into OpenRecovery > Wiped Dalvik Cache
- Applied 28.01.2011 0.07-11.01.28 version
One more thing, you may need to update and/or change your baseband files.
I hope this helps.

Thx for the help guys I,m back up an running. Greatly appreciated
Sent from my Droid using XDA App

[Q] Stuck in Boot animation after installing seeARMS ROM

Hi, I have installed seeARMS ROM and followed his instuction. I have kept the JL2 modem and speedmod kernell (I was already on speedmod). I have tried 2 methods to install. The seeARMS.UGJL2.v0.4.zip with the seearms file and the CWM.
Both install went OK and I even had a congratulations screen. The problem is when the phone reboot it stays on the boot animation and get stuck there. I have tried 2 different boot animation and the same happen.
I have no problem to restore my data since I had backup but I would like to have the seearms ROM. Any idea?
Also a side question, can we get the new CK1 modem with seearms?
Richard

Have you been wiping your phone before flashing the rom? I have been having issues like you describe only when i flashed a rom w/o wiping.
(In CWM Recovery: wipe data/factory reset, wipe cache and advanced -> wipe dalvik cache)

No. I did not wipe. I am not interested in the new ROM if it mean wiping. I made a test by downloading a boot animation app. I trying 2 different boot animation and had the same result. The boot animation play with no sound but I have a vibration during boot and then nothing. Eventually it go back to the animation, vibrate and this repeat until I restore the backup.
I am wondering if tehre is something special about the Bell Canada boot animation?
Can I use the seearms without any boot animation folder?

I don't think it's a problem about the boot ani in particular.
I am not very familiar with the rom, since i have another device. In the seearms rom thread the dev mentioned two versions of the rom, one that requires wiping and one that does not.
So i guess it could be working out to flash the latter w/o wiping. But in my expirience those things rarely work out that way.
There might be incompabilities with the config data left behind by the rom installed before, or other possible issues.
Only way to be sure that those things aren't blocking anything is to wipe the phone and do a clean flash.
Personally i always do it that way. And if i like the rom, and choose to use it, it is always possible to get back all the apps and settings back with titanium backup and/or syncing them back.
But as always before wiping, if you choose to do so, please be sure to have a full nandroid backup, in case you want to go back, or something goes wrong.

I will try the wipe version

What rom were u on before seearms
Sent from my GT-I9000 using XDA Premium App

I was still on stock (froyo 2.2). Actually still on it today

You were right. The wipe version worked fine. I have now to decide to keep it or not...lol

ROM is awasome was worth well the trouble.

Glad it worked out for you - have fun with the rom
Sent from my Desire Z

[Q] Galaxy S Boot Screen hang meaning?

Hi all,
So after I flash a new ROM (MIUI MGv2/RC8vC/MGv1) I always hang at the Galaxy S GT-I9000 screen - the first boot screen.
I am wondering what this means? is it a corrupt file, something wrong with my internal sdcard, ROM not installed properly?
Please help,
Thanks.

some times a wipe from recovery will help and goes back to normal boot
many issues may cause this problem for instance if framework.jar or android.policy.jar or... have some bugs , will happen like that

Hi,
By wipe you mean clearing the formatting system, data, cache, dalvik cache and a factory reset? I ask this because the MIUI roms are not are non-wipe and the instructions recommend you to format those places before install (which I did).

I mean wipe cache partition from recovery. just try it and ley us know if it works

Well I just tried again but it doesn't work because I can't access recovery mode. It hangs at the Galaxy S screen and doesn't move from there so I'm wondering why because if I can't fix the bad install then I can't access the recovery mode and can only flash.

if recovery dont work BUT download mode does,
start the whole process again, flash back to stock froyo with froyo bootloader.
did you come to MIUI from Gingerbread ??

Well i've done the process like 10 times, nearly every single time from froyo (JPU,JS5,Ezbase 2.0) and I also went from 2.1 to 2.2 and then to MIUI. The other times I have tried coming from CM7 as CM7 works.

well i have a similar issue but in my case i just wiped my data thru cwm on darky v8 xxjpy..
now i get boot loops,any idea what should i do??
i know this is not exactly the thread but if i get my answer it'll save me from starting a new one..

When I got bootloops i normally reflashed. If you don't have data it will probably work?
I assume you have data as your on Dark v8 when V9 is out?

i dont understand by have data??
i flashed v9.5 but went back to v 8 few months ago..
today i just wiped/factory reset my phone using cwm and it was succesful but now its bootloops and vibrations..
i never wiped my phone before and only have flashed using cwm,never used odin for flashing roms!!

OH I see, by data i meant personal data that you might want to back up...I'm not to most knowledgeable but I know how to flash roms. I reckon you should try to flash V8 it again if you can enter recovery.

Stuck on HTC Logo during boot

Running stable CM 7.0.3 with CWM 3.0.0.5
I've been getting some intermittent freezes waking from sleep, seems to be worse when the battery is getting low. Maybe it is a Launcher Pro issue? as that is my home and the culprit program when the Force Close or Wait dialogue pops up
I wanted to upgrade to v176 of our CM nightly to see if maybe that'd help but I can't seem to get past the white screen'd/green htc logo
Upgraded my CWM to latest ... nothing
Tried an Amon_RA recovery ... nothing
Re-downloaded latest gapps and tried multiple 'newer' roms multiple times ... nothing
Any ideas here? I used the two wipe everything scripts (only one works in CWM) multiple times before each effort to no avail
Restored from backup and I'm on 7.0.3 again but progress, even on this legacy device (thanks devs!) would be pretty sweet as I've been wanting to pitch it into a wall lately
...paitently waiting on the Epic Touch 4G or iPhone for Sprint, thanks all

mbarnwell said:
Running stable CM 7.0.3 with CWM 3.0.0.5
I've been getting some intermittent freezes waking from sleep, seems to be worse when the battery is getting low. Maybe it is a Launcher Pro issue? as that is my home and the culprit program when the Force Close or Wait dialogue pops up
I wanted to upgrade to v176 of our CM nightly to see if maybe that'd help but I can't seem to get past the white screen'd/green htc logo
Upgraded my CWM to latest ... nothing
Tried an Amon_RA recovery ... nothing
Re-downloaded latest gapps and tried multiple 'newer' roms multiple times ... nothing
Any ideas here? I used the two wipe everything scripts (only one works in CWM) multiple times before each effort to no avail
Restored from backup and I'm on 7.0.3 again but progress, even on this legacy device (thanks devs!) would be pretty sweet as I've been wanting to pitch it into a wall lately
...paitently waiting on the Epic Touch 4G or iPhone for Sprint, thanks all
Click to expand...
Click to collapse
I like to actually wipe instead of flashing a wipe. Try flashing the nightly on top of your current one, just wipe cache and dalvik cache before flashing.
Sent from my HTC Hero making C.R.E.A.M.

dastin1015 said:
I like to actually wipe instead of flashing a wipe. Try flashing the nightly on top of your current one, just wipe cache and dalvik cache before flashing.
Sent from my HTC Hero making C.R.E.A.M.
Click to expand...
Click to collapse
+1. I would go into recovery (I use CWM) and format system, cache, data, boot and then flash whatever rom you are trying to flash. Also, give it some time to boot up. Some roms can take a while. You can try the flashover too as Dastin suggested.
Are you using any tweaks like firerat's? There can be issues with that if your system partition is too small
Good luck!

That is a good idea
Keep rolling back versions of the ROM I want to try until something sticks.
Update the 'new' ROM to the latest version.
In the meantime, I've updated to CWM 4.0.1.5 and wiped everything possible at least twice. Plus a format all script. I will let you know if this does it for me

I still have not been able to flash any other roms, the only thing I can do is change recoveries and do nandroid restores. I am using the latest herodeck rom which is based on the CM roms. Hopefully someone will be able to help us.
And sorry about making a new post I was thinking that we were using different roms but I guess that they are actually pretty close to being the same.