Database Develop

Touch screen not working in shift

I have Installed windows 7 in my shift and evrey thing is working fine except the touch screen it,s not working
i have followd the instruction but still didn't work
any one can help me to make it working
regards

Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?

khals said:
Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?
Click to expand...
Click to collapse
thanks i got it working but i got another problem
if i update the display driver i get the blue screen and it keep on rebooting automaticly
any solution for this
regards

That's because AERO doesn't run at the moment at screen resolutions higher than 800*600.
Boot into SAFE MODE - Delete New Installed Graphic Card Drivers - Enable Windows 7 Classic theme in Windows and Reinstall drivers!

Can someone PLEASE reply ?
I am desperate. I deleted the HPA Partition in order to free up 3Gigs and installed Windows 7.
I followed all the tutorials, so i installed ECDriver (Vista Compatibility Mode + Run as Administrator) and Touch Screen Driver.
I mention that i see HTC Embedded Controller (in device manager) after installing ECDriver , but touch screen doesnt work (after installing touchscreen drivers) = No Pen or Touch Input is available for this Display
What am i doing wrong ?!?

I also had the same problem, so, I've installed the VGA driver from the package the way mentioned somewhere here and in the same order, as I think the new VGA driver installed with the Win7 installation is missing an important bit at the end of the installation. After that, and after a reboot, the touch started, but I did not get a calibration screen. Even without the calibration, the screen seemed to be fine. I've also disabled Aero just in case as I did not want any more blue screens.

So you have installed ECDriver, Touchscreen and VGADriver (WinVista Compatible & Run as Administrator) in this order ?
When i install VGADriver, i get a 'Cannot copy'. I thought the driver was corrupt and tried re-downloading it, but this didn't solve the situation.
How did you manage to install it ?!?

First I've installed just touchscreen driver and it did not work, so I've installed EC driver and then touchscreen and it also failed. So, I've added the VGA. I think it did not want to install with Vista compatibility so I think I forced it through with XP compatibility, got a message saying the driver was older than what I had installed, I said yes, please, go ahead! It then installed and at the end some CMD windows poped up and then closed and I then installed touch screen again. Nothing seemed to have happened then, so I've restared the computer, had all my fingers crossed (very, very technical!) and voilá, touch screen was there.

Thanks for the support. I tried several times, following exactely your steps, but i didn't manage to make it functional.
Unfortunately I had to go back to Windows Vista.
Now i have Windows 7 Vista Ultimate SP2, instead of the preistalled Windows Vista Business OEM.
Althought it's running ok, i am waiting for the final version of Windows 7 (not the RTM that i tried installing).
Win7 installed = 7 GB, Windows Vista Ultimate = 14 GB :|

Hi
Sorry to hear that it did not work for you. Like I~ve mentioned elsewhere, the only thing that did not work for me all the way is the sd card that keeps dropping from explorer.
Did I mention that I did not do a clean install? I've installed it as an upgrade and had all the functions (Wifi, BT, Phone) on while upgrading to avoid the problem some people have of the wifi connection going missing when upgrading(W7)/downgrading(XP). I've been busy at work so did not have time to use it much or test it some more.

Well, you missed to mention that
I tried a fresh install, after deleting the HPA partition (now i have 37GB Hdd, instead of 33).
Maybe that's why it didn't work for me...
A friend of mine gave my his Shift to try installing Win7 via Upgrade. Maybe it works.
BTW : Windows 7 Ultimate SP2 is running just perfect on Shift. Too bad it occupies 20GB (after drivers and updates)

[Q] Whats causing my cappy to freeze windows 7?

Just made the switch from ubuntu 10.10 to windows 7, didnt have issues using my cappy as a mass storage device on ubuntu
On win7 x64 if I try to transfer a file thats just more than a few mb's either from the cappy to the pc or vice versa, the transfer just gets stuck, the loading bar is flashing but it doesnt get anywhere. I have to unplug my phone from the computer in order for it to go away, this causes windows explorer(not the internet browser) to restart as well.
-my other usb devices work without a problem
-have tried all six usb ports on my computer, same thing
-even weirder, i reformatted, installed win7 x86 just to see, transfers work fine on it. Reformatted again and installed x64 with fingers crossed, transfers didnt work on it again.
-I have tried transferring files with no windows updates installed on x64 as well as all updates installed, file transfers still get stuck both ways.
-im using the x64 captivate drivers from the odin3 thread on xda. running andromeda3 ROM.
anyone know what this could possibly be?

JBLogic said:
Just made the switch from ubuntu 10.10 to windows 7, didnt have issues using my cappy as a mass storage device on ubuntu
On win7 x64 if I try to transfer a file thats just more than a few mb's either from the cappy to the pc or vice versa, the transfer just gets stuck, the loading bar is flashing but it doesnt get anywhere. I have to unplug my phone from the computer in order for it to go away, this causes windows explorer(not the internet browser) to restart as well.
-my other usb devices work without a problem
-have tried all six usb ports on my computer, same thing
-even weirder, i reformatted, installed win7 x86 just to see, transfers work fine on it. Reformatted again and installed x64 with fingers crossed, transfers didnt work on it again.
-I have tried transferring files with no windows updates installed on x64 as well as all updates installed, file transfers still get stuck both ways.
-im using the x64 captivate drivers from the odin3 thread on xda. running andromeda3 ROM.
anyone know what this could possibly be?
Click to expand...
Click to collapse
sounds like bad drivers from samsung or windows is not using the newest driver version, maybe downloading drivers from samsung and manually installing would help
32 bit version of windows will have different drivers

I installed .net 4 and that seems to have fixed my problem, if that makes any sense.

makes sense. i keep forgetting about that but it is something you should have for alot of things in windows, thought it was one of the required things for adb and odin as well. not sure though

JBLogic said:
Just made the switch from ubuntu 10.10 to windows 7
Click to expand...
Click to collapse
I'm lucky enough to have a roomate with a dual boot ubuntu/windows so I can keep my Ubuntu and borrow his windows machine when I need it. Definately sounds like driver/ .net 4 issues though.

problem: Wlan on windows xp pro sp2

hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?

en_ky said:
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
Click to expand...
Click to collapse
Hi en_ky!
I was following the other installation method "Installing Windows XP with Windows Post Install (WPI)" that you can find on this forum, but basically should be the same.
Anyway, regarding WLAN on the WPI method it says:
"13. WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later". This step is just before installing CYGWIN
After finishing with SwapResolution,
"Now it usually asks about the WLAN drivers, see step nr. 13."
"If it asks about drivers for Windows Mobile, just answer yes until it finishes."
"To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
"DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager."
"If you copy this without being in safe mode, it will not work because after the reboot the system will replace the overridden version with the old one again."
So check again all the steps and do the last one in Safe Mode (I think here is your problem)!
Good luck!

thank you for your reply,
I tried to resolve my problem with help of windows update and an eterneth connection for internet. At first it doesn't start with the same yellow ! But after a restart, it starts!!!!
Many thanks to you in any case; i know that your answer will be usefull for another person with this problem!

Solved - Cannot connect to computer - USB

My nook use to be able to connect to my fedora computer at home and my windows computer (had to install Motorola drivers for that) at work.
I had no troubles connecting either with my rooted stock nook or with running CM7 from the SD card.
I installed CM7 internally and really messed that up. Eventually I got it working and everything works fine except I cannot get it to connect via usb on either my linux machine nor my windows.
What information can I provide?
Windows sees it but the driver fails according to device manager (explorer shows the drive letters but when I select it, it tells me to insert a disk.) Linux shows nothing in kde but I can run lsusb when I get home to see if it even sees it.

I tried pugging it into my fedora machine.
The only new line between when it is plugged in and not is
Bus 002 Device 004: ID 2080:0002

What version of CM7 are you running? My USB connectivity stopped working with nightly 69. It worked fine with 7.0.2.

That must be it. I have been updating hoping the problem would be resolved. I'll try downgrading to a build pre-69.
I am at 75 right now. I couldn;t get 76 to boot and the comments said that 77 suffered the same affliction.
I had to wipe my nook and start over so I really didn;t notice the version change otherwise I would have started there.
Thanks for the heads up.
I'll post back tonight on weather downgrading solved this issue.
At home, I ssh into my nook, but this isn't possible at work since I can't get the nook on a network there.

I used the usb apk to get around this issue.
Thank you

I just upgraded from CM7 nightly 76 to nightly 87, and now usb storage works perfectly. The internal emmc partition and my sd card pop right up in Windows.

I just installed nightly 87 today & I am still having no USB connectivity at all. Did you also install an OC kernel?

christoophat said:
I just installed nightly 87 today & I am still having no USB connectivity at all. Did you also install an OC kernel?
Click to expand...
Click to collapse
Nope, stock kernel that came with CM7.

Alright...looks I have some work to do tonight, thanks

[Q] Dual-booting ubuntu and windows 8.1

Hey, I am having some problems in regards to dual-booting Ubuntu 13.10 and windows 8.1. If anybody could provide some help that would be fantastic. I have already posted it in the AskUbuntu forums but there has been no help as of yet. Original post.
Here is my situation, I am trying to dual boot Ubuntu 13.10 with Windows 8.1 on my laptop. I have managed to install Ubuntu and get the GRUB menu as the primary boot selector. However when I try to boot into Ubuntu it boots into low graphics mode and I cannot get past that. When it asks me to wait while the display restarts and I press okay the mouse cursor blinks and it halts there.
During the installation I could not ever enter live-CD mode and had to boot straight into install Ubuntu mode. Also, I had to boot with a nomodeset option to be able to install Ubuntu. It would present me with a white screen else (and before anybody asks, I have tried booting with the nomodeset enabled).
I am not connected to a wi-fi network in Ubuntu so I can't update my drivers to work with it. I am thinking to use a boot-repair disk to see if that helps (the guide I have followed to dual boot said to boot into live-CD mode to perform the boot repair, but as I said I have never been able to access live-CD mode).
My laptop is a Packard Bell Easynote TE69KB. The processor is an AMD A Series A4-5000, Quad-Core 1.5GHz. It comes with 4GB of RAM, the graphics processor is an AMD Radeon HD 8330. Windows fast start-up and secure boot are disabled.
EDIT: I have tried using the boot-repair disk but it seems to bypass that (although I have verified that the CD drive is the first place to load from in the BIOS).

That's an error type screen I keep getting too.