Database Develop

Car mount suggestions?

I am looking for a windshield (suction cup) car mount solution that will charge my Sprint Touch while in the mount/cradle but does not have a built in speaker. My car has bluetooth integrated so I don't need the hands free capability.
Also, my main purpose for the mount will be to run navigation software so I would like the ability for the mount to easily rotate 90 degrees for horizontal or landscape mode.
I've been looking around online but I must be looking in the wrong places...
thanks in advance.

not exactly suction cup window mount, but I use one of the magnetic mounts for mine in my truck. it holds it in place nicely, maintains access to the charging port, can be turned however you want it, and the metal plate on the back is thin enough to not interfere with putting it in and taking it out of the belt holster. if you have a pilot truck stop near you, they sell a nice magnet mount there.

not really aware of any truckstops near my area... kind of looking for something i could order online. thanks for input though

Windshield Mount
I bought one off ebay that mounts to the windshield using a suction cup then you just plug your standard car charger into it. Like this.
http://cgi.ebay.com/NEW-CAR-MOUNT-D...hash=item170237255037&_trksid=p3286.m14.l1318

In the pictures, it looks like the charging port would be covered..

WhiteSoxxx said:
In the pictures, it looks like the charging port would be covered..
Click to expand...
Click to collapse
No, The bottom has prongs on the left and right. The center is open to plug in the charger. This thing does tend to rattle though when the phone isn't in it. It works great with the phone in it.

I just bought this, received it on monday.
http://www.buygpsnow.com/HAiCOM-Cus...-Nova--T-Mobile-MDA-Touch--Dopod-S1__946.aspx
It is so solid. I live in PA, which has some of the worst potholes you can imagine. So far it has not budged, with the phone in it or not. It does landscape really nice as well as vertical.

qwho, how does the HIACOM mount and what does it mount to?
kenper, does that suction cup stay attached pretty well? I'd hate to see my Touch go crashing to the ground... I'd probably cry.

I think i'm gonna get the one QWHO has for 2 reasons. It looks alot less bulky and it is custom made to fit the touch. So what did you end up getting?

It's a not suction cup but I have one in my car and truck. It swivels for everything you will need. You will need to but a mount off the website as well for your particular vehicle.
http://www.proclipusa.com/default.asp

rube740 said:
I think i'm gonna get the one QWHO has for 2 reasons. It looks alot less bulky and it is custom made to fit the touch. So what did you end up getting?
Click to expand...
Click to collapse
Yea, I think I am going to try the one QWHO listed as well.. It's reasonably priced and is apparently sturdy. Wish I could find a mount that had an integrated charger (so that I wouldn't have to plug the phone in seperately of the mount).
Anyone see a mount like that, similar to say an ipod dock?

Suction mount for Touch
kenper said:
I bought one off ebay that mounts to the windshield using a suction cup then you just plug your standard car charger into it. Like this.
http://cgi.ebay.com/NEW-CAR-MOUNT-D...hash=item170237255037&_trksid=p3286.m14.l1318
Click to expand...
Click to collapse
I bought this....and at 5.00 I was really suprised...it bends to the shape I want, holds extremely well, and has padded sides. Plus, because it has a ratched style holder, it actually will hold other phones. My touch fits like a glove and it makes GPS navigation great! I highly recommend this holder..

Buyer beware folks...
I have my touch for about a month. I bought a gooseneck windshield mount on ebay and it is already broken....the bendable metal broke off.
I am currently going for another type without the gooseneck, probably the Haicom

qwho said:
I just bought this, received it on monday.
http://www.buygpsnow.com/HAiCOM-Cus...-Nova--T-Mobile-MDA-Touch--Dopod-S1__946.aspx
It is so solid. I live in PA, which has some of the worst potholes you can imagine. So far it has not budged, with the phone in it or not. It does landscape really nice as well as vertical.
Click to expand...
Click to collapse
Just got this in the mail yesterday and it works great.
Very sturdy and easy to adjust to different positions. Thanks qwho.

kenper said:
I bought one off ebay that mounts to the windshield using a suction cup then you just plug your standard car charger into it. Like this.
http://cgi.ebay.com/NEW-CAR-MOUNT-D...hash=item170237255037&_trksid=p3286.m14.l1318
Click to expand...
Click to collapse
Think this is similar to this one I found: http://www.dealextreme.com/details.dx/sku.2029
This place has Free shipping
Just wondering for people who own this. Hows the accessability to the plug on the bottom of the phone, do the legs get in the way?

I ordered one of these on ebay:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's cradle style so the charger is built in. Rotates either way without much effort, and stays in place well. I believe the model number is htchol012.

Yes the one I posted was a suction cup one. Still works great. In fact I was recently in a car wreck, hit on the front right side, opposite of where I had it mounted. Didn't budge! Don't worry, I'm ok.
For charging, I actually plugged in a car cigarette port extender to a 120v socket converter, which my wall charger for my phone is plugged into, all under my seat. I then ran the charger cord up the insulation in the door and it comes out of a seam right by my phone's mount. It is pretty clean and works really nice. So even though it doesn't have a built in charger in the mount, it now works like one if I want it to.

sci05 said:
Think this is similar to this one I found: http://www.dealextreme.com/details.dx/sku.2029
This place has Free shipping
Just wondering for people who own this. Hows the accessability to the plug on the bottom of the phone, do the legs get in the way?
Click to expand...
Click to collapse
I bought two of those back in the spring - one for the car, and one for my desk. Plenty of room for the USB, so synch/charging is fine. It's very solid, quite flexible, and easy to rotate.
I went this route for my desk, because I couldn't justify the expense of a cradle (I can plug-in the USB myself), and since I use MyMobiler, I really don't 'touch' the screen while it's docked.
DealExtreme isn't the fastest (everything ships from Hong Kong), but they've got good prices, and I've had good luck with everything I've purchased.

Windshiled Mount
Picked this one up form eforcity for $.99 it works really well and is easy to use with the touch or anything els you feel like mounting up there
http://www.eforcity.com/swivel-windshield-phone-holder-for-nokia-n95-cnokn95xph02.html

WhiteSoxxx said:
I am looking for a windshield (suction cup) car mount solution that will charge my Sprint Touch while in the mount/cradle but does not have a built in speaker. My car has bluetooth integrated so I don't need the hands free capability.
Also, my main purpose for the mount will be to run navigation software so I would like the ability for the mount to easily rotate 90 degrees for horizontal or landscape mode.
I've been looking around online but I must be looking in the wrong places...
thanks in advance.
Click to expand...
Click to collapse
Try Scoche, i think thats how it is spelled. I just picked up one from walmart earlier today. They are on clearance right now. There are 2 models that are 20.00 a pieces. One is a suction cup , got longer flex neck , and the other one has a base where you would put in in your cup holder + it came with stickies to stick it to something. It works pretty good. Get it while they still have them. They are located in the GPS section ni walmart.
oh yeah, I got the one with the base that goes into the cup holder.

Car holder for cheap in 5 minutes

While all we waiting for overpriced HTC Car Kit, i need to find way how to mount my precious toy in car.
I hate cheap universal holders from ebay, it look like s**t.
Only one available dedicated holder from Brodit cost more than half price of HTC Car kit - do they think i'm an idiot?
So.. i decided to make holder by myself, using existing parts (i.e. suction gooseneck mount). I was planning to mould holder from epoxy using middle part from iPhone holder, to avoid fiddling with mounting holes. But when i saw iPhone holder i noticed it's almost same size - almost...
I took propane-butane micro torch (cigarette lighter size) and carefully heated up plastic on the side, just 5 mm below edge. After that i was able to spread edges to fit HD2 size. And.. here it is:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You can also buy the HR holder that was made for the Motorola Moto Q. The HD2 fits in there quite nicely, with almost no modifications, just a bit of tape to make the holder about 0.5mm thinner.
Or you buy this one from ebay:
http://cgi.ebay.de/HTC-TOUCH-HD2-DE...UK_Mobiles_Accessories_RL?hash=item518ed1309c

You can also use the Omnia holder if you are like me, comming from Omnia

cristip said:
You can also use the Omnia holder if you are like me, comming from Omnia
Click to expand...
Click to collapse
Hm? How should that work? I have the official car holder for the Omnia here, it grabs the device on the top and bottom side. If i image my HD2 in there (christmas is coming, slowly )...how should i get the charger to the micro USB port?

i bought a universal car holder in a shop near my home..and works very well,just hasnt a nicedesine but not so horrible
bought a car recharger always a universal kit..maybe it wont last 1 year but has a very nice option that most original dont have...the cable is like a dog string u push a button and it return in the holder without cable u can cut or press with shoes
recharger 13.99 euro
car support 17.99 euro

maati said:
You can also buy the HR holder that was made for the Motorola Moto Q. The HD2 fits in there quite nicely, with almost no modifications, just a bit of tape to make the holder about 0.5mm thinner.
Click to expand...
Click to collapse
Getting ready for a drive down the east coast of US. Where can I get that Q car holder and what does it clip in to?

good tip thanks!

hi
omnia holder is compatible with hd2? fits well?
tx

bL1X said:
Getting ready for a drive down the east coast of US. Where can I get that Q car holder and what does it clip in to?
Click to expand...
Click to collapse
OK Just checked this out.
the HD2 is 120.5mm x 67mm x 11mm
The Moto Q is 116mm 64mm x 11.5mm
The Omnia is 123mm X 58mm X 12.9mm
The moto Q in narrower by 3 mm and the omnia by 9mm.
It must be a pretty tight fit to get the HD2 in?
If it isnt (as mentioned it need a vecro part) if the phone was in a silicon skin would it fir perfectly?

azreal1983 said:
It must be a pretty tight fit to get the HD2 in?
Click to expand...
Click to collapse
Fits in the Q holder with room to spare.
azreal1983 said:
If it isnt (as mentioned it need a vecro part) if the phone was in a silicon skin would it fir perfectly?
Click to expand...
Click to collapse
Not sure how compressible the silicone is or how sticky it would be against the plastic ?
That's why I used velcro; cheap, compressible, non marking - tight interference fit.

smartphone.net.pl said:
While all we waiting for overpriced HTC Car Kit, i need to find way how to mount my precious toy in car.
I hate cheap universal holders from ebay, it look like s**t.
Only one available dedicated holder from Brodit cost more than half price of HTC Car kit - do they think i'm an idiot?
So.. i decided to make holder by myself, using existing parts (i.e. suction gooseneck mount). I was planning to mould holder from epoxy using middle part from iPhone holder, to avoid fiddling with mounting holes. But when i saw iPhone holder i noticed it's almost same size - almost...
I took propane-butane micro torch (cigarette lighter size) and carefully heated up plastic on the side, just 5 mm below edge. After that i was able to spread edges to fit HD2 size. And.. here it is:
Click to expand...
Click to collapse
Pics missing!

Nice work dude

Docks

I will need to switch to Verizon within the next few months (due to work reasons). I am currently using a Nexus One on TMobile and plan to get the Droid Incredible on Verizon when I switch.
I am waiting patiently for root access to be gained but also had some other concerns before switching. A main concern is that I have not heard mention of car/home docks for the device.
I currently own the car and home docks for the Nexus One and use them regularly. I am hoping the Incredible will also have a nice docking system like this.

I need a dock and a car mount, too! I have to ask, but does N1 stuff work with DI?

syntrix said:
I need a dock and a car mount, too! I have to ask, but does N1 stuff work with DI?
Click to expand...
Click to collapse
no.........

I just purchased a general use windshield mount from best buy which works pretty well on the Incredible.

I would suggest ProClipUSA they offer a wide variety of windshield mounts and you can just swap out the device holder if you carry more than one item with you or you change phones often.

RaptorMD said:
I would suggest ProClipUSA they offer a wide variety of windshield mounts and you can just swap out the device holder if you carry more than one item with you or you change phones often.
Click to expand...
Click to collapse
This issue, for me, is not holding the device. I like having a car dock like the Nexus One because it provides integrated charging functionality. I do not want to fiddle around with an extra adapter and plugging in my device. I want to be able to drop my device into the dock and have it do what I want it to do
Also, the N1 car dock launches Car Home upon docking. Just perfect.

I got a factory windshield mount today.
It's pretty slick. It's a clip in, belt holder, but the back of it allows it to mount to the neck of the window piece.
There's even a cutout in the holder so you can videos while you drives
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

syntrix said:
I got a factory windshield mount today.
It's pretty slick. It's a clip in, belt holder, but the back of it allows it to mount to the neck of the window piece.
There's even a cutout in the holder so you can videos while you drives
Click to expand...
Click to collapse
that also allows you to use street view with augmented reality in Google Maps, but your right, it makes for a great use to take car video
i don't know if augmented maps is available in the US just yet though
see augmented reality example below:

That would be perfect if a charger was built in.

Here come cradle docking for Verizon Incredible if anyone interest!
http://www.emobile-accessories.com/products_cradle_htc_incredible.html

tonyfung820 said:
Here come cradle docking for Verizon Incredible if anyone interest!
http://www.emobile-accessories.com/products_cradle_htc_incredible.html
Click to expand...
Click to collapse
I wonder how that's going to work when the charging connector is not on the bottom.

Devildog8791 said:
I wonder how that's going to work when the charging connector is not on the bottom.
Click to expand...
Click to collapse
It's not, unless there's a side manual plug in type port!

Currently own the car dock mentioned in the thread, not overly impressed with it, but maybe I didnt bother to take the time to make it work. Came from the droid dock, which went where you put it and stayed there, especially helpful for when you have to plug it in. This dock has 3-4 articulated points that dont work so hot, then the fact that its actually a holster "attached" to the actual dock through a quarter inch piece of plastic adds another element of instability to the system. Tightening the joints does not help much, the holster clip still rotates freely and overall makes plugging the phone in while docked a major pain, in most cases requiring both hands to hold the phone still enough to plug it in. The window mount also leaves something to be desired, after dumping my incredible on the floor for the 3rd time, I gave up on the thing. I know how to apply suction mounts and this one falls well short, maybe I just got a bad one or something, but it will not stay on the windshield while the weight of the phone is on it. Overall, threw it away because I wanted just a car dock, if I wanted a holster I would have bought a holster. If it had been incorporated into the mount in a better way to give more stability to the dock I would be alright with it.

The belt clip, to me, is a huge feature. Don't need it? you just leave it clipped to the window mount.
I'm on the other side of the fence... to me it works great, has never fallen off my window, and has been very stable! It's better than the motodroid dock imho (sans the sideways orientation via magnets that the DI lacks).
When one comes out that has a charging port that you can dock to, I'm getting it! Isn't seidio working on one? Maybe it was another company?

You guys might want to try one of those universal grip holders. I don't really care for things hanging off my windshield, so I had an arkon SM429-SBH mega grip attached to the arkon air vent mount and it worked out really good with my G1. I tried putting my friend's Incredible in there and it fits, no blocked ports. they have a windshield mount too, if that's your thing.

So far all of the Incredible docks suck.
Unfortunately there is no car or home dock for the Droid Incredible that is nearly as good as the docks for the Nexus One. This is a sad fact of Incredible ownership.
It seems that iPhones get the best accessories.

I use the factory windshield mount, and I just ordered the cradle featured in this link, http://www.oriongadgets.com/HTC-Dro...radle-with-2nd-battery-support-pid-11366.html

spotmark said:
I use the factory windshield mount, and I just ordered the cradle featured in this link, http://www.oriongadgets.com/HTC-Dro...radle-with-2nd-battery-support-pid-11366.html
Click to expand...
Click to collapse
I have a similar mount I bought on ebay (here), and while it works, the phone sits completely vertical, 90 degrees to the desktop. Not a very comfortable viewing angle, lol. I may get one of those like you bought, as it looks like it's held a bit better than the stand I have. I definitely don't mind plugging the phone in, as I have to do it anyway...
As for car docks, there is one company who has a powered doc. Proclip has this mount, but you have to purchase the attachment point for your vehicle seperately, and the price rolls up pretty fast (for my truck, it was 109 before shipping, so I'm holding off on it for now). Nice thing is though that you can buy a version of it that wires into the vehicle, so you can hide the cabling a bit better than the chargers we use now.
I'm going to try to get some pictures of my desktop mount today or tonight, but I think it's going to require some modification to make it work how I wanted it to.

spotmark said:
I use the factory windshield mount, and I just ordered the cradle featured in this link, http://www.oriongadgets.com/HTC-Dro...radle-with-2nd-battery-support-pid-11366.html
Click to expand...
Click to collapse
once you get your dock can you please let me know how it works out. maybe even some picks. this looks like this may be the one for me.

tonyfung820 said:
Here come cradle docking for Verizon Incredible if anyone interest!
http://www.emobile-accessories.com/products_cradle_htc_incredible.html
Click to expand...
Click to collapse
Wow... you can just smell the sketchy-ness. Must be a new olfactory add-on for Chrome I didn't know I installed.

Scosche car dock

Has anyone had a look at one of the Scosche car docks? I don't see how it holds the device in place, if it works then it looks like a nice compact little unit.
http://www.scosche.com/products/sfID1/337/sfID2/370/productID/2014
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Super-E-Trader does a generic car dock but it's a huge ungainly thing. Something more suited for the Samsung that isn't gonna be half the size of my little Mirage hatchback would be nice.

knightnz said:
Has anyone had a look at one of the Scosche car docks? I don't see how it holds the device in place, if it works then it looks like a nice compact little unit.
http://www.scosche.com/products/sfID1/337/sfID2/370/productID/2014
Super-E-Trader does a generic car dock but it's a huge ungainly thing. Something more suited for the Samsung that isn't gonna be half the size of my little Mirage hatchback would be nice.
Click to expand...
Click to collapse
I just have a hard time believing that blue material is "sticky" enough to prohibit my tab from flying off there should I need to accelerate suddenly.

It's REALLY tacky. You can lift a bowling ball with that mount. Really.
Downside, that stuff is a grit magnet as well.

Croak said:
It's REALLY tacky. You can lift a bowling ball with that mount. Really.
Downside, that stuff is a grit magnet as well.
Click to expand...
Click to collapse
clingo makes products with same sticky stuff, i have couple of their products , it does get dirty and losses its "stickyness" but all you do is wash it with tap water and its back to the original sticky strength.
http://www.clingo.com/
** tested the grip strength on the back of a sprint tab seems to work very well.
The mount shown has two adhesive pads so it should be fine

Would it destroy my nice leather Zenus if I tried mounting it?
Is it like the stuff those little gecko-tongue kids toys are made out of?

knightnz said:
Would it destroy my nice leather Zenus if I tried mounting it?
Is it like the stuff those little gecko-tongue kids toys are made out of?
Click to expand...
Click to collapse
I know that Leather is a no no for clingo and assume this stuff

I think the scoche would work great. Overkill really. I bought this tiny mount and it works great for the galaxy tab. My got it with an employee discount is the only reason I chanced it. That stick'em on it is surprisingly strong.

I have the Scoche mount and it works great. The suction cup is made from the same sticky stuff and really holds itself and my Tab in place.
There is a warning included that it may discolor certain materials, so it is recommended to use it strictly on glass or with the included dash mount piece. I have mine mounted to the dash using the included piece (which uses 3m tape) and it's solid as a rock. Was kinda worried about it discoloring my tab, and the Zaggskin that I eventually added, but no problem with either one so far. Holds the tab really well.
I used one of those ratchet clamp style window mounts for an old PDA that I had and hated how it gripped the PDA. It would also lose suction on the glass and fall off, especially during hot days during the summer, and really cold days in the winter. The Scoche mount stays put and holds the tab much more securely than that old clamp mount did with the PDA.

Shane_pcs said:
I think the scoche would work great. Overkill really. I bought this tiny mount and it works great for the galaxy tab. My got it with an employee discount is the only reason I chanced it. That stick'em on it is surprisingly strong.
Click to expand...
Click to collapse
Is this the same as the one your using? Is there enough of the sticky material to hold it tight?

Thats almost exactly like mine. And it sticks perfectly. I was a skeptic, but no longer. honestly it could hold the tab upside down if needed.

dugg67, where'd you buy your scosche mount? can't seem to find it anywhere except the scosche site.

Bought mine at Walmart.
Sent from my SCH-I800 using XDA App

OMG! The sticky stuff melted in my hot car and dripped down on my stereo buttons clogging them! I live in SoCal so it's not that hot! If you live in the US South West, don't buy this item. If you live in Alaska or Siberia, you'll have no problem with the sticky material melting and dripping.

knightnz said:
Has anyone had a look at one of the Scosche car docks? I don't see how it holds the device in place, if it works then it looks like a nice compact little unit.
http://www.scosche.com/products/sfID1/337/sfID2/370/productID/2014
Super-E-Trader does a generic car dock but it's a huge ungainly thing. Something more suited for the Samsung that isn't gonna be half the size of my little Mirage hatchback would be nice.
Click to expand...
Click to collapse
i just bought one very similar to this at walmart for $20. i have the gs3 and i took of the side clips of the mount and i have the body glove tatic case which is a candy/gel caze and it sticks right to it. its ridiculous how secure it is and i highly recommend it. it is a very well made and designed piece. looks super clean also. the model of the one i have is:
IPH3GRR
though i cant find it online anywhere, only the IPH3GR which is different? the one i have is just like the one in the original post although the flex shaft is longer, about twice that judging from the pics. my kit from walmart consisted of this: http://www.scosche.com/consumer-tech/product/2097 with the exception that it also included the window mount.
---------- Post added at 06:44 PM ---------- Previous post was at 06:39 PM ----------
found it on ebay actually, $12.99 free shipping. the one i have.
http://www.ebay.com/itm/Scosche-Win...324205?pt=PDA_Accessories&hash=item3f1e2ed0ad

Car mount?

Hi,
What kind of car mount do you use? And where did you buy it?
If possible, put a photo of it
Thanks.

i'm just using a Generic car mount for PDA from DealExtreme

I bought this universal dock on eBay and LOVE it. It mounts to your CD player in your dash instead of on the top of the dash or windshield.
http://cgi.ebay.com/UNIVERSAL-SMART...ltDomain_0&hash=item230d440e5d#ht_3234wt_1143

chrlswltrs said:
I bought this universal dock on eBay and LOVE it. It mounts to your CD player in your dash instead of on the top of the dash or windshield.
http://cgi.ebay.com/UNIVERSAL-SMART...ltDomain_0&hash=item230d440e5d#ht_3234wt_1143
Click to expand...
Click to collapse
nice concept, but it will not work on mine, since my CD player slot is hidden
and it looks like as if that thing can pop out and fall at any time
how does it latches to the slot?
just using those 4 little wings to insert inside, i don't think those will hold.
i'll like that car mount, if they had an Air Vent clip for it

I'm thinking about getting this: http://www.dealextreme.com/p/universal-silicone-car-mount-for-all-gps-33213
Anyone have any experiences with silicone grip mat products like this one?

AllGamer said:
nice concept, but it will not work on mine, since my CD player slot is hidden
and it looks like as if that thing can pop out and fall at any time
how does it latches to the slot?
just using those 4 little wings to insert inside, i don't think those will hold.
i'll like that car mount, if they had an Air Vent clip for it
Click to expand...
Click to collapse
No it wont pop out, its 'wings' splay up and down and grip to the inside of the cd player mounting judging by the video

Arkon SM428
I bought an Arkon SM428 on Amazon.com for my Vibrant, but works just as well for the NS I just got Vibrant got smashed in car door . Dirt cheap too. Don't let the screws in the picture scare you, only necessary if you don't have a flat enough surface for the doublestick foam tape, which holds tight. Easy to rotate 90 degrees when needed.
http://www.amazon.com/gp/product/B003XAEJZG
Bought it from seller "GPS Cheap"
Hope you find this useful.

I got this from best buy, I mounted it in thespace that holds all my crap near my shifter
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I just bought that CD slot holder too. It's coming today. Looks great. I will post some pictures today when it arrives.

nxt said:
I just bought that CD slot holder too. It's coming today. Looks great. I will post some pictures today when it arrives.
Click to expand...
Click to collapse
How did this work out for you?

Cuchillo said:
How did this work out for you?
Click to expand...
Click to collapse
Here's some pictures I took.
https://picasaweb.google.com/nXtIak/CDPhoneMount?feat=directlink
2004 Mazda 3i.
The bottom part is removable, have to remove it to be able to plug in a charger, since it's very very close to the bracket. Mount holds the phone fine with the sides.
I'm not sure how I'm going to use the mount. Installed up or down, been trying both.
You can only swivel the mount updown/left/right just a little bit, so I'm sure in certain cars you won't get a great view of your phone.
The mount does shake a little bit while driving. Tightening the cd slot screw does not help.
Overall, I like it.

Cuchillo said:
How did this work out for you?
Click to expand...
Click to collapse
The CD slot one is great. Really good quality, plus I like it mounted there a lot better than on top of the dash or the windshield. I have been using it for a couple months now and I still love it.
Plus it is very easy to remove to put a CD in if you want to use a CD, then you can replace the phone holder and the CD will still play fine.

If you're willing to wait, dunno when, Kidigi is planning to release some car mounts. They look nice, but expensive as usual. About the same price as the HTC car mount for the Nexus One. Just google Kidigi and visit their online store.

Wow, for a passive holder, this is amazing:
http://www.kidigi.com/product_lv2.php?pid=1266

Kah-Neth said:
Wow, for a passive holder, this is amazing:
http://www.kidigi.com/product_lv2.php?pid=1266
Click to expand...
Click to collapse
What's the price on these?

terra_droid said:
What's the price on these?
Click to expand...
Click to collapse
wow this one looks great. its preorder only right now but its $39. it says it comes with the car mount, car charger, belt clip, and desk stand. looks like a great deal once they're available.
Sent from my Nexus S using XDA Premium App

I use the Akron SM220. Worked perfect for my blackberry's and now for the NS. Plus its cheap.

Proclip
http://www.proclipusa.com/application.aspx?path=/home/home.aspx
Try this I have been using them for the last two years with the many phones I have had and all mounts are amazing. They work really well and are made for your vehicle and phone in mind, for a total of 84.95 for the entire kit.

I actually found this while wondering around BestBuy, which means Im sure you can find it for 50% less then I paid for it there. :º)
Although our phone is not listed as compatible, it actually fits it like a glove, even in my thin case.
http://www.griffintechnology.com/products/windowseat-aux#
Im not a fan of the extension arm, it feels as cheap as it looks. The dash mount works perfectly for me in my Subaru.
Best part of all is that not of the plugs or camera are blocked.

ritalin said:
Click to expand...
Click to collapse
without a case, will this fit also? meaning will it be too loose without case?
http://www.youtube.com/watch?v=DK9AOd51q6o
from this video, it looks like it barely fits an iphone4 with the case fully extended... our nexus s is larger than iphone4...