working Android Missing - Touch Diamond2, Pure Android Development

Is some build of Android where works:
1.GSM
2.Data
3.WIFI
4.power more then 1 day + charging with correct % value
5.Speaker or headphones when the music run
thanks.

1,2,3 working here on topaz
http://forum.xda-developers.com/showthread.php?t=641021
4,5 not work

petarr_kamenov said:
1,2,3 working here on topaz
http://forum.xda-developers.com/showthread.php?t=641021
4,5 not work
Click to expand...
Click to collapse
Shame that 4,5 is not working, I will wait until somebody will make it and then I will use it.

Related

Small pause in audio playback on my X1

Hi.
I got a big problem with my X1. There is a very small gap or pause (some ms) in audio playback every 5 minutes. It's almost in every song or every second. I'm on WM 6.5 H.V4 Extendir Bulid 21869. I've tried many other Roms ,only German -> or ist a problem that only our cook's have, but the gaps are still there. And it does not depend on player I use. Tried S2P, WMMP, Nitrogen, Pocket Player and so on. Already tried to hardreset and so on...
Any1 got a solution 4 me?!
many greets from Germany -> btw. very very nize forum!
Edit: @bootx1: for me it depends also on what rom I use and thx for the faaast answer!
just checked the cpu usage with a taskmanager which has a live graphic display and when there is a gap there is no change in cpu usage
UPDATE: tried this driver -> forum.xda-developers.com/showthread.php?p=5837209#post5837209 and it starts up, but the speakers are silent ... deinstalling ... speaker works but still the issue!
It's a long time since I've searched for a solution for this, so there may be one by now, but I doubt it, as it's in most roms I use, from rom to rom, it varies in it's severity.
hi
had similar issue in Nitrogen on lock screen, every 7 sec for about 1 sec the song froze
could solve it in options - settings - general settings, where I increased prebuffer length to 2.500ms (default 1.500ms), after that my probs where gone
might be worth a try 4 you too
DrakenKorin said:
hi
had similar issue in Nitrogen on lock screen, every 7 sec for about 1 sec the song froze
could solve it in options - settings - general settings, where I increased prebuffer length to 2.500ms (default 1.500ms), after that my probs where gone
might be worth a try 4 you too
Click to expand...
Click to collapse
Dude you are a savior here!!!
YEAH! YEAH!
Late in the last night I've tried another rom. The S4 v1.4(german rom from this forum) with 6.5.5 and the gaps, skips or pauses everything is gone! Just clear sound.
Nice!
But I would prefer a 6.5 bulid... Is it possible to copy drivers from 6.5.5 to 6.5?
fixed
Did you try this?
forum.xda-developers.com/showthread.php?t=545358
@sylvios: THANKS! Works perfect. Been searching for this all the time! U're GREAT!
Now I can use any rom without stutter!
Thread can be closed.

[12-09-2010][Android SuperFroyo][Testers needed][Neopeek]

Sorry guys I won't retype everything twice now. Worked all the day to get this pushed out. Now I am kinda tired! So this is just a quick first post. I will update it later. The first SuperFroyo Release is available now!
As promised by you in the "Good News..."-Thread -< I need testers now!
Here is the link + download + instructions for the first release of SuperFroyo for X1:
Android SuperFroyo
reserved for my mama and papa...naaaah future updates!!
IM downloading it. I will report back as soon as posible.
THANKS. IM very excited
Good!!
I am waiting for about 4hours lol
I want to work camera this version
btw thxxxxx
P.s: Pardon my English TT
I am gonna Try It Tonight...... Thanks .. Neo.. And All Devlopers........ Cheers
Its faster than any previous version of android on X1 and more responsive.
its seems very stable.
When i enter SupSetup it crashes. I guess that is CyogenMod setup but it doesnt work.
First haret boot is long. But then its very fast. After i hit haret it enters android very fast.
Scrolling in file manager and menu gerneraly is faster. And phone wakes up very fast. Before i had to wait 0,5 second or 1 second to unlock phone...now its instantly up. Hope you understand me.
3d seems better. I dont know if 3dHW accelleration is enabled. Carom3d was running very slow on tremers21/8 like 1 frame per two second. And now with this its running like 3 frames per second. Improvement but 3d games are still unplayable.
Next problem its battery status. When im charging its showing CHARGING for few seconds then its instantly showing 100% wich is not true. Then when i unplug cable its showin 50% and droping to 40% like 1% every 2 seconds. I was like WTF. Its not showing the right value.
Sliding beetween screens seems a bit laggy.
Before on 21/8 tremers when someone calls me i have to wait 3-4 seconds before i could se who is calling. Now on this version its very fast.
On XPERIA X1 generaly the ONE button on top is used for turning screen on and of, and for turning phone off. In your android version that funcion you assined to bottom right button (Drop/Cancel Call Button).
even when i hold that button i cant enter POWER OFF button becouse it tuns off display just after showing POWEROFF option.
i will try to test battery life time.
Kernel panic - not syncing, no init found.
What is wrong, I did everything according to instructions (I think )
denyboy said:
Its faster than any previous version of android on X1 and more responsive.
its seems very stable.
When i enter SupSetup it crashes. I guess that is CyogenMod setup but it doesnt work.
First haret boot is long. But then its very fast. After i hit haret it enters android very fast.
Scrolling in file manager and menu gerneraly is faster. And phone wakes up very fast. Before i had to wait 0,5 second or 1 second to unlock phone...now its instantly up. Hope you understand me.
3d seems better. I dont know if 3dHW accelleration is enabled. Carom3d was running very slow on tremers21/8 like 1 frame per two second. And now with this its running like 3 frames per second. Improvement but 3d games are still unplayable.
Next problem its battery status. When im charging its showing CHARGING for few seconds then its instantly showing 100% wich is not true. Then when i unplug cable its showin 50% and droping to 40% like 1% every 2 seconds. I was like WTF. Its not showing the right value.
Sliding beetween screens seems a bit laggy.
Before on 21/8 tremers when someone calls me i have to wait 3-4 seconds before i could se who is calling. Now on this version its very fast.
On XPERIA X1 generaly the ONE button on top is used for turning screen on and of, and for turning phone off. I your android version that funcion you assined to bottom right buttom (Drop/Cancel Call Button).
even when i hold that button i cant enter POWER OFF button becouse it tuns off display just after showing POWEROFF option.
Click to expand...
Click to collapse
As I wrote on my site SupSetup is not available atm. I removed apk! For me this build runs amazing compared to my HTC Diamond (also SuperFroyo so I have the direct comparation). It's really incredible also for me how fast the display wakes up! My Diamond needs sometimes up to 3secs or doesn't even wake up...
I also encountered the prob with powering off. But you maqy remap the keys. Another solution is to press AND hold down poweroff-button and then touch the display with left hand for reboot/poweroff. This works for me.
Nevertheles I am really confused how good it works. I also tested Neocore by pushing it! It gave me 18FP/s without overclocking. Don't know it exactly but how much do you get on Trem's build?
jkoljo said:
Kernel panic - not syncing, no init found.
What is wrong, I did everything according to instructions (I think )
Click to expand...
Click to collapse
I know you propably followed everything but this is what i did.
Formated SDcard. Created 3.650 (not exactly) Fat32 partition and 350 Ext2 partition.
Copied everything on Fat32 partition with haret.exe been on root. From WM6.5 first i launched install.exe from npkinstall. After reboot i started haret.exe from root of SDcard.
That is all.
jkoljo said:
Kernel panic - not syncing, no init found.
What is wrong, I did everything according to instructions (I think )
Click to expand...
Click to collapse
You think Please try to start from scratch. Seems like you made a mistake somewhere. In most cases you didn't partition correctly. Try it out a few times. It will work cause this build for X1 is noob-friendly if you have partitioned correctly! 3 Steps:
* Partitioning
* Running install.exe within npkinstall-folder
* Running haret.exe from root
Maybe you can have a look at documentation-folder. It contains some jpegs to help you out...
And please how do i change the black notification bar to original white???
Yeah, thanks for help Neopeek and denyboy, I noticed that as I had followed the partition sizes in the youtube video, I had ended up with 580 meg ext2. I will format again to 350 meg ext2
We will see, I will post the results!
denyboy said:
And please how do i change the black notification bar to original white???
Click to expand...
Click to collapse
You can change it in settings. Move to spareparts blablabla. Somewhere you will find Notification colors. Adjust them and then reboot Android!
vatoloco said:
You can change it in settings. Move to spareparts blablabla. Somewhere you will find Notification colors. Adjust them and then reboot Android!
Click to expand...
Click to collapse
Thanks. By the way. Mass Storage dont work. That is nothing new.
jkoljo said:
Yeah, thanks for help Neopeek and denyboy, I noticed that as I had followed the partition sizes in the youtube video, I had ended up with 580 meg ext2. I will format again to 350 meg ext2
We will see, I will post the results!
Click to expand...
Click to collapse
Dont follow that complex tutorial. Just boot ubuntu or any other gnu/linux go to Gparted and delete all partitions then create new FAT32 and new Ext2 with adeqate size. That all.
Or use any other software for partitioning for Windows or GNU/Linux
denyboy said:
Thanks. By the way. Mass Storage dont work. That is nothing new.
Click to expand...
Click to collapse
The build is preconfigured for ADB in froyo.user.conf. I thought some of you guys may help in logging via ADB to fix some bugs and providing logs via adb / ddms
vatoloco said:
The build is preconfigured for ADB in froyo.user.conf. I thought some of you guys may help in logging via ADB to fix some bugs and providing logs via adb / ddms
Click to expand...
Click to collapse
I hope someone will help you finish this but im not expert. I guess tremere could assist you he did great work. You two combined should acomplish great things when it comes to Android on Xperia.
Ok, now it works! The Android just did not like my 580 meg ext2 partition
And phew, it is FAST!
The battery driver goes crazy sometimes.
By the way, you mentioned about overclocking in your post in the other forum, is it possible?
vatoloco said:
You can change it in settings. Move to spareparts blablabla. Somewhere you will find Notification colors. Adjust them and then reboot Android!
Click to expand...
Click to collapse
original notification bar has a textures. When i select simple colors like this it looks owfull. Any way to restore the default white one.
how is the battery life?

Xperia-Xdandroid-X1 2.2.1 25.11,Fatsal-xperoid 2.0.1 25.11,Hero Sense UI 2.1 25.11

Hello folks.
I'll be posting an esy to use package for everyone who wants to try the lastest android builds for the xperia x1.
I'll also keep it updated to the latest releases.
Just unzip the archive to your sd-card root.
No need to enable wifi or bluetooth in win mo for any of the versions.
Have your phones plugged in during first boot !!!
Grab the 25.11 edition here , xdandroid.2 from here and sp3dev kernel version from here.
Sp3dev's kernel seems to be better.
Working: -wifi
-bluetooth
-gps
-marketplace
-3d acceleration - neocore 15.7 fps
-3g works (orange romania)
-phone doesn't overheat
-phone speacker works
-great battery life for sp3dev
Warning: The boot takes a million years and the system is abit slow in the first minutes.
Changes:
-new kernels from xdandroid
Well it seems the new versions from sp3dev is quite ready for day to day use.
Starting now I'll provide Android 2.0.1 versions too. I find them to run smoother and better on the xperia. Also I'm hopping for better battery life.
Same kernels as above, the same things work.
Grab the xdandroid kernel version from here , xdandroid.2 from here and sp3dev version from here.
And starting today im proving a Sense UI rom frm the HTC Hero.
A little warning they are even slower to boot so have patience and also boot logo is upside down.
Grab the xdandroid.2 kernel from here and sp3dev from here.
Note !!!! : Radio version seems to influence android quite abit. 1.14.25.55 seems to work the best. Please report your radio version and how android runs on it.
And on a further note I recomend this for dual booting. For more details go here.
Blimey I should organise my post better.
what about battery life?
Till now 3 hours uptime with mild use (3g on, some wifi and installing some applications and testing them) and battery is down to 98%. May be a bad battery reading or its actually having a good battery life, only time will tell. It running really cold compared to all the other builds i tryed which made my phone burn hot.
which kernel did you use?Thanks for one zip package
I've been using the latest kernel from here.
Nice release, have it running on my xperia right now.
Saw at the about screen its running froyo 2.2.1 although for some reason it won't connect to my wifi at home.
Nice release
i do have one question, how is the key mapping for the android? did a quick search but couldn't find an image that used to be here on the forums with the key mapping.
data connection not working for me.no 3g either.
New version is out. Probably better battery life.
3g does work but you need to configure your apn.
Regarding the key mapping I have no idea. I dislike the xperia's keyboard, never used it.
lgstoian said:
New version is out. Probably better battery life.
3g does work but you need to configure your apn.
Regarding the key mapping I have no idea. I dislike the xperia's keyboard, never used it.
Click to expand...
Click to collapse
unfortunatly 3g won't be possible since i use my sim in my Galaxy S so i hoped for wifi to be working. About the keymapping. i meant the buttons under the touchscreen, not the touchscreen .
The release is running smooth on my xperia
do i need to run the sp3dev kernel version from the root or can i put it on the same SD card in a directory?
where can we download the new version
neo 299 see the first post.It's called sp3dev.
As for button mapping:
-power button is used for sleep and power
-call buttons are for call
-ok button is for back
-xpanel button is for home
-and left action button is for menu
No you can only have one release on a sd card. And I do recommend the new one more.
lgstoian said:
neo 299 see the first post.It's called sp3dev.
As for button mapping:
-power button is used for sleep and power
-call buttons are for call
-ok button is for back
-xpanel button is for home
-and left action button is for menu
No you can only have one release on a sd card. And I do recommend the new one more.
Click to expand...
Click to collapse
and by new one you mean the sp3dev. okay, will put that one on the sd then
And thank you for the button mapping
Do you know how can i disable 3g so that i can use data connection.Otherwise data wont work for me on 3g.Thanks for sp3dev version upload.Much obliged
Settings > Wireless > Mobile networks > use only 2g networks
lgstoian said:
Grab the 1.11 edition
Click to expand...
Click to collapse
This looks sweet, thanks.
However, Megauploads gave error message :
"The file you are trying to access is temporarily unavailable."
Any chance you could upload it somewhere else as well ?
Thanks! HS
The sp3dev kernel version works fine, my X1 gets al bit warm but works. Tweetdeck works realy well, Foursquare will be tested tomorrow.
The only two problems I have till now are within the phone function. Kinda important...
1) I can't hear anyone and they can't hear me when calling.
2) And I don't have a clue how to add a ringtone.
Can someone help?
very good version of xdandroid.
fast and stable....
battery comsumption seems ideal??
but the main issue is no sound at all for me..
including ring tone, voice call...etc...
please help to fix~~otherwise, it is a really great build
Try using the other build. I think that one had working sound but battery wouldn't last so long.
And as for ringtones google a tutorial ).
I'm also having trouble with the sound.... no sound on calls, media, etc.... But when i test the ringtone there is sound...
Any ideas? Great build btw.....keep up the good work...
kuber said:
I'm also having trouble with the sound.... no sound on calls, media, etc.... But when i test the ringtone there is sound...
Any ideas? Great build btw.....keep up the good work...
Click to expand...
Click to collapse
I have not installed this version. But ill do it later today.
On other versions when i had no sound on calls i just played with volume buttons while recieving call and then it worked.

WM6.5.x ROM (CLEAN, FAST, STABLE & LOW BATT CONSUMPTIONS) for Himalaya device!

I know that all this WM6.5x rom are only just experiment or still beta roms for tested only. I tested some every rom and I found there's still a bug, including camera still not works properly to capture some pictures or recording some videos and even some times freeze it self,some times theres no sound at all, IE or GPRS not working and bluetooth won't working fine.
Is there a WM6.5.x rom for Himalaya device that works with no bugs at all?
And is there any CLEAN, FAST, STABLE & all function also features is fully working without any problems in really LOW BATTERY CONSUMPTIONS? Which WM6.5.x ROM is the best?
Help me cause i'm very really need it and thanks before!
brewhoxs said:
I know that all this WM6.5x rom are only just experiment or still beta roms for tested only. I tested some every rom and I found there's still a bug, including camera still not works properly to capture some pictures or recording some videos and even some times freeze it self,some times theres no sound at all, IE or GPRS not working and bluetooth won't working fine.
Is there a WM6.5.x rom for Himalaya device that works with no bugs at all?
And is there any CLEAN, FAST, STABLE & all function also features is fully working without any problems in really LOW BATTERY CONSUMPTIONS? Which WM6.5.x ROM is the best?
Help me cause i'm very really need it and thanks before!
Click to expand...
Click to collapse
21884 http://forum.xda-developers.com/showthread.php?t=643889
I managed to have himalaya turned on for a month without any hang, really
aeroflyluby said:
21884 http://forum.xda-developers.com/showthread.php?t=643889
i managed to have himalaya turned on for a month without any hang, really
Click to expand...
Click to collapse
what without charging???????
flyboyovyick said:
what without charging???????
Click to expand...
Click to collapse
Without any hang means: The device does not freeze or didn't need a soft reset!
muckelmaus said:
Without any hang means: The device does not freeze or didn't need a soft reset!
Click to expand...
Click to collapse
Hey thats pretty good!
yeah i also tested aeroflyluby's ROM it's really nice working.
KAASHP said:
yeah i also tested aeroflyluby's ROM it's really nice working.
Click to expand...
Click to collapse
I guess it's full recommended WM6.5 21884 Clean, Fast, everything works & most Stable ROM for our Himalaya's
brewhoxs said:
I guess it's full recommended WM6.5 21884 Clean, Fast, everything works & most Stable ROM for our Himalaya's
Click to expand...
Click to collapse
Yeah i would recommend that rom, cause its the one i end up always going back to. lol

First usable android on X1

Im sorry for openening a new topic. But fell free to remove it.
I havent noticed that anyone here wrote about
Froyo FRG83 - Android 2.2.1 Beta-Release [06-11-2010] from neopeek
it needs ext2 partition
http://www.megaupload.com/?d=FD0Y3LPR
You can find more info on this link
http://www.neopeek.com/en/forum/Son...o-FRG83---Android-221-Beta-Release-05-11-2010
I used it today for a long time and everything was so fast and i had no problems accept for:
-sometimes it will and sometimes it wont charge
-in market when downloading app i have to cancel and click download again in order for download to start.
-other small issues like battery status.
I had apsolutely no crash. I made and recieved 12 calls today and 3 sms without any problems. Havent tested battery life but it seems OK. Market works, Wifi,...etc.
its uses sp3dev zImage.
This is first port of android that is accually usable for everyday work. I used it all day without any major problem.
We are very close to fully working version. Thanks to everyone.
You should definitly try it if you have not.
thanks!!!!
downloading now...
Pepenpaul said:
thanks!!!!
downloading now...
Click to expand...
Click to collapse
Dont thank me...im just messenger.
before launching haret in WM i enabled Wifi. Not sure if its important or not but i did it anyway to be sure.
P.S. Headphones work, no restarting...etc
Use this calibration file
http://hotfile.com/dl/81126735/ee8c283/ts-calibration.html
Use this calibration file
http://hotfile.com/dl/81126735/ee8c283/ts-calibration.html
10x
i'll try it right now
10x
What makes that build more usable than previous ones?
haven't tested it yet, but most other neopeek's buils are fast ans have no problems except little ones you are mentioning in first post.
How is battery life in that one?
Lets put it out this way. I tried them all and this one is best so far.
Battery drain is slow becouse it uses sp3dev files i think. Havent still tested full battery life time but i think its great. Will test it later.
Its been on all day and no restart, no crash, no lag, no slowdown.
I made and recived 16 calls and 5 sms till now without any problems.
Most of other ports do eventually freeze, restart, crash or slowdown. But this one still works perfectly. In combination with good battery time its best port so far.
So far we had ports with stability but bad battery time.
And lately we had ports with good battery time but other stuff was not good.
This one combines it all (good stuff)
Wifi works, headphones work, calls work, its very fast.
Sometimes you have to wait minute till download from market starts.
There are other small issues. I think bluetooth dont work.
But for me this is so far most usable ROM.
P.S. I installed Launcher Pro.
The issue with market (to need to cancell download and start again) is something usual on all devices so don't worry about that.
Battery consumption is about 9-10% per hour with 3G network and little usage.
So we have about 10-11 hours of use with this ROM.
Hmm... I tried to install it following this tut : http://www.neopeek.com/en/forum/Que...-tosWheresWhens---All-right-here!?lang=en#525
But... it seems that INSTALL.exe install everything in a folder, not in my ext2 partition ... oO
Did u use this way to install it ? denyboy
EDIT : Ok , ext2 wasn't set as primary ..
couldn't connect Wifi (wifi connected but doesnt find my accespoint :/) + cant share connection everything else seems ok
ilgreco112 said:
couldn't connect Wifi (wifi connected but doesnt find my accespoint :/) + cant share connection everything else seems ok
Click to expand...
Click to collapse
have you tried turning on Wifi in Windows Mobile before starting haret.exe
I got it working. So, if I have to reboot the device, I have to get into WinMo first and run Haret everytime?
denyboy said:
Use this calibration file
hotfile.com/dl/81126735/ee8c283/ts-calibration.html
Click to expand...
Click to collapse
what is this for ?
sdpsby said:
what is this for ?
Click to expand...
Click to collapse
This file control touch position ( i think ) Just download and replace the old file
great
this is the fastest build i ever tested. but still i have some problems:
-battery dosen't charge more than 70%
-gallery sometime crashes
-wallpapers dosen't fit, the image i crop form the wallpaper si more smaller than the screen resolution
is good at:
-battery life time via 3g or wifi
-dosen't heat the battery
-neocron test 18.7 fps (faster the Xperia-Xdandroid-X1 4.11 v2)
-very smooth animations
-browsing is fast
-market is working
-media player works greate (untill now)
-has file explorer
ill keep on testing
after I installed npkinstall,my phone reboots,and then i hit haret,exe,boot screen shows up,and then linux says kernel panic-not syncing....unable to mount root fs,,rebooting in 7,,6,,5,,sec. anyone?thx
piponxs said:
after I installed npkinstall,my phone reboots,and then i hit haret,exe,boot screen shows up,and then linux says kernel panic-not syncing.... anyone??thx
Click to expand...
Click to collapse
Check again if you ext2 partition is "Primary"... It must not be "Logical"
I had the same issues solved by that
where can I edit that?thanks

Categories

Resources