Not booting past R G D screen - Tilt, TyTN II, MDA Vario III General

I flashed a new ROM a couple of days ago and all has been ok. Today my phone froze up so i did a soft reset and the phone now hangs at the boot screen.
I get the Windows logo and:
R 1.70.19.09
G 25.83.40.02H
D 3.57 HTCKS
Any ideas, I need the phone for work!

Searching is so hard, good thing there are pro's like me to do it for you.
http://forum.xda-developers.com/showthread.php?t=544792&highlight=rgb

Stuck on Splash screen
Please use the search in future has been answered numerous times.
Try hard-reset if no joy, get phone into bootloader and flash stock ROM either via usb or sd.
On that note thread closed.

Related

HELP. tried upgrading.. stuck at 98%

hey.. ive upgrade to new roms before.. however i tried going from the cingular 2.25 rom to summiters aku 2.3.. and it froze at 98% and was unable to finsh.. now I jsut tried downgrading and it froze again at 98%.. it won't complete anytthing.. help. please.
It's normal for it to seem to freeze at 98%, but it really will complete if you just wait a few minutes. No worries... just be patient.
If Stuck
hey if your phone is doesn't go through with the rom upgrade and doesn't push through and when you reboot you get stuck on the boot screen.
Put your phone into USB programming mode by holding the camera button down and doing a soft reset with the stylus. Then you will be able to load any rom you choose.
With regards to your frozen at 98 just give it time i would say don't unplug
same problem, still stuck
2nd time trying to load "Cingular_Custom_AKU2.3_Combo_Installer_V1.exe" ROM but still stuck at 98%...on the computer it says 100% and finishes but the phone is still stuck at 98%..tried to do a soft reset, but stuck at bootloader screen..
Help pleaseee!
Thanks!

After flash, still boots to bootloader..

Hi,
I successfully HardSPL'd my 8125 G4 a few weeks ago, then loaded NBD8.3 rom.. its been awesome.
Yesterday, the phone booted and shows the spash screen, but then boots back into bootloader.
I tried to reflash NBD and a few other roms again, they flash successfully, but it still boots into the bootloader.
I tried to hardSPL flash my phone, but that says it cant connect to the device (but the RUU connects and flashes fine)
Whats my problem??
Thanks
I tried to use mtty1.42, the instructions say to use USB and not COM1 or COM2, but I dont have USB in the drop down box??
please help!
Thanks!
Hello together, maybe someone can give me a hint.
after flashing my wizard it always boot´s into the "red green blue" screen. I tryed different tools and roms and its possible to install a new rom.
the "pda phone rom update utility 2.00.1" always says
congratulations.. update successfull.. etc.
but after reboot the wizard again comes into the red green blue screen. arg
ipl 3.08.001
spl 3.08.0001
thanks for your help
Hello,
Wizard_Love_2.26.10.2_WWE_Novii_CF2 did the Job. The Updater is italian (i guess) but the rom i english.
Thanks to all who post here a lot usefull thinks!!
search, try & error did the job.
how to exit bootloader
I flashed wizard 200 it was succesfull but now it is stuck with bootloader mode. hard reset won't work.
I know that battery died right after flash and now i can't charge it or exit boot loader.
Any idea, except waiting 20 days for new battery?
all the best!
XDAMON said:
I flashed wizard 200 it was succesfull but now it is stuck with bootloader mode. hard reset won't work.
I know that battery died right after flash and now i can't charge it or exit boot loader.
Any idea, except waiting 20 days for new battery?
all the best!
Click to expand...
Click to collapse
Men, it happen to my the same thing.
100% battery charge before start, but it dies after the procedure... No spare battery, No external charger, No charge on boot loader mode... "touchè"
We have a very functional smartphone before, but now we have a beatiful grey brick with a 3 coloured screen.
That`s not all... if you ordered a new Baterry, if it`s not stolen by the postman, when it reaches to you let`s pray that is in good shape...
Men, we cant do anything but wait... and the wait is killing me.
The alternative is a home made battery with 3 AAA batteries, but i will left that to Mc Gyver.
I ordered battery charges as well
Will post result in 2-3 weeks when I get it finally.
Any other (buttons) trick?

help

hi all ,
I tried to upgrade the device with new rom, and I make something wrong.
After Reset device stuck with the white screen and HTC logo in green, I tried to make HR a few times and it did not help, any creative solution?
ofer izhaki
what rom did you tried to install?
should be OK, if you can still get to the boot loader screen, you should be fine.
just try flashing a new ROM, or better, a stock ROM
Please post flashing issues in this thread
Thread closed

help needed please with possible brick fixed:D

hello all
yesterday i wanted to flash a friend tp2
when i flashed it it went to 100% and then it gave a rom code error
i restarted the phone in bootloader to flash a other rom and it wanted to read the image on the sdcard
wich resulted in red serie of digits on top of the screen 00058002
and the phone turned off
i deleted the image from the sdcard and tried it again
i came in bootloader and i saw threu the spl text rom upgrade error
now everytime i enter bootloader it turns off the phone in 5 sec
i managed to run a task 29 one time by resetting the phone multiple times
can some one help me
owww its not fixed
i managed to get stock rom on it again but during the custimizsation the phone turned off:S
and now i have the same problem again
edit: i dont know how but its fixed

[Q] Topaz Stuck on startup screen

hey guys.. i have a topaz phone. i did a hard spl 1.33 a few weeks ago and installed Energy ROM.. it worked out fine. but today when i restarted my phone, its stuck on the start up screen saying "Touch Diamond 2 R4.49.25.57 G somthing and D something." i did a hard reset but it didnt solve the problem. i can enter the boot loader mode, the red green blue screen..
You have to upgrade HSPL to 2.51. It is necessary for newest rom's.
thanks, it worked....

Categories

Resources