Is this the infamous Nexus 3G problem? - Nexus One Q&A, Help & Troubleshooting

before I got my phone I read about all the 3G problems people were having.
when I first got my nexus, there were no issues at all. no dropped service or connection.
I'm in a 3G area (looked at tmobile coverage map) and I see no reason for this to be happening.
my phone will show that I have 3G connection (UMTS) but when trying to use anything that requires a connection, it fails.
on the other hand, HSDPA network works fine and so does EDGE.
I got my phone over a month ago and this hasn't started happening until recently.
I'm always on EDGE network now and if I'm not on EDGE, I have to be on HSDPA in order for me a to send messages or use data connection.
UMTS is broken and does not give connection. I want to call HTC and see if they can replace it but I don't think they'd do it.
anyone else have the 3G problem? I'm sure a lot do, but is it only with UMTS?

This is not the "3g issue" everyone talks about. This sounds like you are either having network issues in your area, or did you flash a new ROM to your phone recently?

RogerPodacter said:
This is not the "3g issue" everyone talks about. This sounds like you are either having network issues in your area, or did you flash a new ROM to your phone recently?
Click to expand...
Click to collapse
I had been on a CM test build and hadn't flashed a rom in a long time.
network issues isn't the problem because my friends G1 yesterday had 3G and I had EDGE.
I don't think it's my SIM card either, not even two years old.
I'm tempted to call HTC because this happened out of nowhere after a good month of no problems.

99% of the time it's a carrier issue.
When the number of users on a carrier grows or jumps on the carrier, the tower signal shrinks it's radius. And if you're in two competing tower areas, then your signal might drop/fluctuate because the phone is swapping between them.
Nothing the phone can do about it. It's probably your carrier issue.

how can that be when my friends right next to me have full bars and 3G while I'm on edge?
-------------------------------------
Sent via the XDA Tapatalk App

dudebro said:
how can that be when my friends right next to me have full bars and 3G while I'm on edge?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Change your settings to WCDMA only then.

I've tried and all I get is no connection or occasionally hsdpa.
-------------------------------------
Sent via the XDA Tapatalk App

I have experienced something like this. I am unrooted and few weeks after having the phone I would see a 3g symbol but be unable to access any data. It has been very frustrating once but generally it kicks in again with a reboot.
A similar issue since installing froyo is that the stock browser wouldn't connect. Other browsers and applications could access data but the stock browser couldn't. It started again later but I now use xscope.
I love android but I hope that the continue to work on its stability because it could be improved

benjatt said:
I have experienced something like this. I am unrooted and few weeks after having the phone I would see a 3g symbol but be unable to access any data. It has been very frustrating once but generally it kicks in again with a reboot.
A similar issue since installing froyo is that the stock browser wouldn't connect. Other browsers and applications could access data but the stock browser couldn't. It started again later but I now use xscope.
I love android but I hope that the continue to work on its stability because it could be improved
Click to expand...
Click to collapse
so is your 3G working now? I'm just going to call HTC and see what happens.
I've tried WCDMA only, flashing a radio, and anything I can find on the web but no luck.

dudebro said:
so is your 3G working now? I'm just going to call HTC and see what happens.
I've tried WCDMA only, flashing a radio, and anything I can find on the web but no luck.
Click to expand...
Click to collapse
Have you tried modifying your build.prop? If not, do a quick search and see if modifying it helps...

chowlala said:
Have you tried modifying your build.prop? If not, do a quick search and see if modifying it helps...
Click to expand...
Click to collapse
what should I search for? I'm not familiar with modding the build.prop.

Related

3G Connection Issues on CM 4.2.7.1

I am having a very strange issue:
Whenever I am at home, and my G1 is connected via 3G, I cannot use data or make/recieve calls. If I enable the "Use only 2g networks" checkbox, it reconnects via EDGE and works perfectly. I currently have a service request out with TMO which should resolve in the next 24-48 hours, but I was wondering if anyone had heard of this issue.
TMo has no idea why I'm not getting signal, the problem continued even when I reverted to stock "Cupcake".
Things I've tried:
Reverted to stock firmware and unrooted phone (Didn't work; same symptoms)
Call T-Mobile, they removed and re-added me to network. (Didn't work; same symptoms)
Swapped SIM card at T-Mobile store (Didn't work; same symptoms)
T-Mobile service request in my area (Results pending)
Things I am going to try, but haven't yet:
- Return to stock firmware, reinstall CM 4.2.7.1
- Try an older CM like 4.2.4 or 4.2.5
- Connect to WiFi for data connection, see if this replicates the problem as with 3G
- Enable data roaming.
The fact that it only happens at home leads me to believe it's not a problem with the phone, however I'm more than willing to do more to rule it out.
Phone Specs
T-Mobile G1
Firmware Version 1.6
Baseband Version 62.50S.20.17H_2.22.19.26I
Kernel Version 2.6.29.6-cm42 [email protected]
Mod Version CyanogenMod 4.2.7.1
Build Number DRC83
Dont tell T-Mo that your rooted thats a big mistake right there, that can be used against you if you ever have to get the phone replaced.Play around with the apn settings and make sure "always on 2G" isnt checked in settings. Maybe your house isnt in the small 3G coverage area, or your phone cant connect to it. Why would you think data and talking at the same time would be possible? Its either you answer or you stop browsing the web.
Ace42 said:
Dont tell T-Mo that your rooted thats a big mistake right there, that can be used against you if you ever have to get the phone replaced.Play around with the apn settings and make sure "always on 2G" isnt checked in settings.
Click to expand...
Click to collapse
Yes, thank you, I know not to tell them that, they have zero idea. I also forgot to mention they did swap out my SIM card at the store.
Read what I posted. Turning on "Always On 2G" is the ONLY WAY I can make calls and use data at home. When that isn't on, the phone says it has a 3g connection with four bars, but will not dial out, take calls, or connect to web pages. I've also verified my APN as epc.tmobile.com which is correct, and this affects my voice and data communications.
deviant749 said:
Yes, thank you, I know not to tell them that, they have zero idea. I also forgot to mention they did swap out my SIM card at the store.
Read what I posted. Turning on "Always On 2G" is the ONLY WAY I can make calls and use data at home. When that isn't on, the phone says it has a 3g connection with four bars, but will not dial out, take calls, or connect to web pages. I've also verified my APN as epc.tmobile.com which is correct, and this affects my voice and data communications.
Click to expand...
Click to collapse
Try another rom to confirm you cant get 3G, it could also be HW failure.But just try a older cyanogen or something else.Ive cant get a 3G signal with cyanogen roms for long but with a hero rom i seem to get 3G(maybe its my imagination)
Ace42 said:
Try another rom to confirm you cant get 3G, it could also be HW failure.But just try a older cyanogen or something else.Ive cant get a 3G signal with cyanogen roms for long but with a hero rom i seem to get 3G(maybe its my imagination)
Click to expand...
Click to collapse
It fails on both stock (untouched, unrooted), and CM. I'll try an older CM just in case though.
deviant749 said:
It fails on both stock (untouched, unrooted), and CM. I'll try an older CM just in case though.
Click to expand...
Click to collapse
Ok post results when you finish.
Ace42 said:
Ok post results when you finish.
Click to expand...
Click to collapse
Rebooted phone between each of these tests:
3G With WiFi enabled: Same result, can't dial out.
Data roaming enabled, Wifi Disabled: No signal at all, 0 bars with "X" symbol.
Stock firmware: 3G won't dial out, forcing 2G works.
Downgraded to CM 4.2.4: Same symptoms.
Ace42 said:
Dont tell T-Mo that your rooted thats a big mistake right there, that can be used against you if you ever have to get the phone replaced.Play around with the apn settings and make sure "always on 2G" isnt checked in settings. Maybe your house isnt in the small 3G coverage area, or your phone cant connect to it. Why would you think data and talking at the same time would be possible? Its either you answer or you stop browsing the web.
Click to expand...
Click to collapse
What ! if you have 3G coverage you can talk and access data at the same time.
That is what 3G provides.
rdfry said:
What ! if you have 3G coverage you can talk and access data at the same time.
That is what 3G provides.
Click to expand...
Click to collapse
I only get edge sorry, i know when i had Evdo(sprint) i could do both things.Just stay with edge then, youll save a lot of battery life.
Ace42 said:
I only get edge sorry, i know when i had Evdo(sprint) i could do both things.Just stay with edge then, youll save a lot of battery life.
Click to expand...
Click to collapse
That's not what I'm trying to do! When I am at home, on a 3G connection, I cannot do ANYTHING. That includes text, voice, data, web, ANYTHING. If i force it to use Edge, all services work properly. This is not acceptable. T-Mobile's coverage map lists me as in a strong 3G area. It SHOULD work.
I dont know what to say, except stay on edge, you alreadt sent a req to tmo.
I am having the exact same problem. Would love to learn what you found out.

3G --> H Data problems

Hello I seem to have a problem and I am hoping someone can help. My phone is rooted running Modaco r20 Desire Rom. Radio is ERE27. I have a strong 3G signal in my town with T-mobile. My problem is that for some reason whenever I use data (internet,online gaming, searching using apps etc) the icon will stay on 3G then switch over to H. Sometimes it will stay on 3G and it will not allow any data. I know about the EDGE to 3G issues. I don't seen to have that issue. Can anyone help and or know why this happens?
Usually, when browsing the internet or anything is being downloaded at all - the 3G icon will switch to H. Really only in custom ROMs though, I don't really believe this happens in the stock ROM.. it's not a bad thing or a problem, at least not for me.
Data doesn't completely shut off for me though.
The "H" means you are achieving an HSDPA connnection of sorts. Stock does not have this icon in it, since HSDPA is a form of 3G and they didn't want people getting confused by it switching from 3G icon to H icon.
HSDPA is faster than basic UMTS, aka "3G"... so it is not a bad thing at all.
No idea why you loose your data connection all together when it switches, since it isn't doing anything other than recognizing you have a faster data connection than basic 3G, nothing is actually changing to cause you to lose your connection since it is still the same connection.
pjcforpres said:
The "H" means you are achieving an HSDPA connnection of sorts. Stock does not have this icon in it, since HSDPA is a form of 3G and they didn't want people getting confused by it switching from 3G icon to H icon.
HSDPA is faster than basic UMTS, aka "3G"... so it is not a bad thing at all.
No idea why you loose your data connection all together when it switches, since it isn't doing anything other than recognizing you have a faster data connection than basic 3G, nothing is actually changing to cause you to lose your connection since it is still the same connection.
Click to expand...
Click to collapse
no it is not...
mine does the same thing... i have to twiddle my thumbs and wait when it switches between UMTS and HSDPA... they are different frequencies just like EDGE is on a different frequency...
I don't think UMTS and HSPA are on different frequencies, the same two frequencies are used (alternating for downlink/uplink) for both, those are 1700mhz and 2100mhz.
For some reason I don't have this problem on Long Island, but when I'm in the city this happens the whole time. Might be something to do with the way the network is configured. Basically whenever data is in use, it just says 3G, but as soon as I browse to a site or actually use data, it switches to H within a second or so. I think a stock ROM would technically be doing the same thing, but it just won't show the actual switch, as it doesn't differentiate between HSPA and UMTS in the top 'taskbar.' Although it would probably show this in the phone status screen under settings.
luna9698 said:
[SNIP]
Sometimes it will stay on 3G and it will not allow any data.
[SNIP]
Click to expand...
Click to collapse
The "3G" to "H" (and back) is a "red herring". If it's "stuck" on 3G when you're trying to do data, it means your handset is having issues communicating in the AWS bands for 3G (2100/1700) and the handset hasn't dropped back to GSM/GPRS/EDGE (1900) yet or is attempting to switch frequencies and the associated towers aren't cooperating with the hand-off or the hand-off is failing.
Cheers,
Kermee
gsvnet said:
I don't think UMTS and HSPA are on different frequencies, the same two frequencies are used (alternating for downlink/uplink) for both, those are 1700mhz and 2100mhz.
For some reason I don't have this problem on Long Island, but when I'm in the city this happens the whole time. Might be something to do with the way the network is configured. Basically whenever data is in use, it just says 3G, but as soon as I browse to a site or actually use data, it switches to H within a second or so. I think a stock ROM would technically be doing the same thing, but it just won't show the actual switch, as it doesn't differentiate between HSPA and UMTS in the top 'taskbar.' Although it would probably show this in the phone status screen under settings.
Click to expand...
Click to collapse
I'm in times square. My phone has never switch to UMTS. Either HSPA or EDGE.
also while it's idle it will only use 3G
it will switch to H to transfer data, then revert to 3G
Kermee said:
The "3G" to "H" (and back) is a "red herring". If it's "stuck" on 3G when you're trying to do data, it means your handset is having issues communicating in the AWS bands for 3G (2100/1700) and the handset hasn't dropped back to GSM/GPRS/EDGE (1900) yet or is attempting to switch frequencies and the associated towers aren't cooperating with the hand-off or the hand-off is failing.
Cheers,
Kermee
Click to expand...
Click to collapse
Ok now that makes sense. Anything I can do to help with the hand-off?
luna9698 said:
Ok now that makes sense. Anything I can do to help with the hand-off?
Click to expand...
Click to collapse
Not that I've found. I have this problem BAD here in Phoenix. I never even bothered with WiFi until I got a Nexus, now I can't live without it. I found that sometimes kicking the phone in and out of Airplane Mode sometimes alleviates it being "stuck".
luna9698 said:
Ok now that makes sense. Anything I can do to help with the hand-off?
Click to expand...
Click to collapse
Try setting the US BAND only in phone info.
ram130 said:
Try setting the US BAND only in phone info.
Click to expand...
Click to collapse
Hmm I cant seem to find your suggestion? Can you be a little more specific? I am using Modaco rom if that makes any difference.
luna9698 said:
Hmm I cant seem to find your suggestion? Can you be a little more specific? I am using Modaco rom if that makes any difference.
Click to expand...
Click to collapse
Which Modaco ROM? If it is Desire, you have to flash the newest radio, and do it after flashing the ROM itself, otherwise you will have major Radio issues... at least that is my, and a fair number of other's, experience.
pjcforpres said:
Which Modaco ROM? If it is Desire, you have to flash the newest radio, and do it after flashing the ROM itself, otherwise you will have major Radio issues... at least that is my, and a fair number of other's, experience.
Click to expand...
Click to collapse
Yeah its Desire rom. I have radio ERE27 right now
Try upgrading to the newest one, 32.26.00.24U_4.04.00.03_2:
http://android.modaco.com/content/g...-online-kitchen-optional-root-insecure-himem/
Make sure you have at least 50% battery before flashing, just download and flash via recovery just like a ROM, do not panic, ever, during the process and do a battery pull, just wait for it to flash, then ask you to reboot, reboot, it will then do the actual radio flashing (you will see a box with arrow screen for a couple minutes) it will reboot on its own into recovery, say "writting" cache with a progress bar for a few seconds. The bar will go away, but the "writting cache" text will not, don't worry it is done, just reboot and then double check it flashed by going to about phone, software, and checking baseband version.
Just remember, can't stress this enough, do not pull your battery at all during this process. And make sure you have at least 50% battery before starting. Flashing a radio is the only way you can brick an N1 right now, and only if you pull the battery during the process, or have a bad download. Speaking of which, I do recommend checking the MD5 sum to make sure it is a good clean download.
luna9698 said:
Hmm I cant seem to find your suggestion? Can you be a little more specific? I am using Modaco rom if that makes any difference.
Click to expand...
Click to collapse
*#*#4636#*#* in the dialer but I don't see US Only.
luna9698 said:
Hmm I cant seem to find your suggestion? Can you be a little more specific? I am using Modaco rom if that makes any difference.
Click to expand...
Click to collapse
*#*#4636#*#* in the dialer. Hit menu button from there.
luna9698 said:
Hello I seem to have a problem and I am hoping someone can help. My phone is rooted running Modaco r20 Desire Rom. Radio is ERE27. I have a strong 3G signal in my town with T-mobile. My problem is that for some reason whenever I use data (internet,online gaming, searching using apps etc) the icon will stay on 3G then switch over to H. Sometimes it will stay on 3G and it will not allow any data. I know about the EDGE to 3G issues. I don't seen to have that issue. Can anyone help and or know why this happens?
Click to expand...
Click to collapse
Same thing happens with me. I'm in Phoenix myself with T-Mobile and running Cyan 5.0.5.3 with EPE54B and baseband v 32.26.00.24U_4.04.00.03_2.
I'll have full bars for 3G and when I goto check the market or anything internet related, the 3G will switch to H and work or stay at 3G and pause with connection error, retry or cancel.
I started having this issue after updating my factory stock radio. Anybody know which one is the stock/default radio IMG is? I'm thinking of downgrading and seeing what happens.
ram130 said:
Try setting the US BAND only in phone info.
Click to expand...
Click to collapse
I did this and it worked great! more consistent and quicker data access doesnt take forever to swith to H like before!
scuzzy19 said:
I did this and it worked great! more consistent and quicker data access doesnt take forever to swith to H like before!
Click to expand...
Click to collapse
I still can't find the way to set it up using US bands only. Any suggestions?

No 3G since FRF83

Any solution?
Only GPRS/EDGE does work, if 3G is available, it disconnects automatically until 3G isn't available.
Solution: Set to 2G-Only :-(
Anyone has the same problem?
I didn't have this problem with FRF 72.
Provider: Sunrise Switzerland
Radio: 32.36.00.28U_4.06.00.12_7
Have you tried going into your phone settings from *#*#4636#*#* and setting it to wcdma only? I did that on mine not too long ago and no more dropping to edge for me!
-------------------------------------
Sent via the XDA Tapatalk App
andi86 said:
Any solution?
Only GPRS/EDGE does work, if 3G is available, it disconnects automatically until 3G isn't available.
Solution: Set to 2G-Only :-(
Anyone has the same problem?
I didn't have this problem with FRF 72.
Provider: Sunrise Switzerland
Radio: 32.36.00.28U_4.06.00.12_7
Click to expand...
Click to collapse
does it lose complete signal? or does it show 3g still but just not doing anything?
Mine was working at first after flash. Then at about 2am it just kept trying to load then times out. Still shows 3g but just dont do anything. Im hoping its just tmobile messing with their towers... I dont see why it would work at first then not now..
The problem is, that i can only have a internet connection, when the phone is logged in into a gsm or edge network.
as soon as wcdma is available, the phone disconnects from the internet.
the signal is always available, but it looses the internet connection when it changes to 3G mode.
when the phone changes from 2G->3G mode, i see for 1s the 3G icon and then no icon will bi there.
when it changes back from 3G->2G, the EDGE/GPRS icon is visible again.
andi86 said:
the signal is always available, but it looses the internet connection when it changes to 3G mode.
when the phone changes from 2G->3G mode, i see for 1s the 3G icon and then no icon will bi there.
when it changes back from 3G->2G, the EDGE/GPRS icon is visible again.
Click to expand...
Click to collapse
ok thanks for clarification. My problem is different. I think related to phone company.. I still show the 3g signal and even have bars, but the pages dont load and eventually gives me the check your service and try again alert....
So Im hoping soon its working again for me... And I hope you as well figure it out.....
Thank you Good luck!
Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.
Thank you very much, thats the solution!!
Andi
ezhangin said:
Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.
Click to expand...
Click to collapse
Sent from my Nexus One using XDA App
ezhangin said:
Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.
Click to expand...
Click to collapse
Thank you. Updated to FRF83 this morning and I've had a full 3g signal, just couldn't pull data all day. Could over edge. Sure enough, GSM only was selected.
AT&T N1.
I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.
Lost Dog said:
I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.
Click to expand...
Click to collapse
Same issue here.
Switching to WCDMA preferred doesn't work for me though.....any help is welcome
I think it's a hardware problem with a lot of N1's.
Mine was ok the first 2 months, and later, 3g not working. This is driving me crazy ):
I have tried everything. Change the simcard, I did a reset of the data with my telcon, and nothing happens.
I've seen these problems on many N1's.
I hope google / htc release a fix for this problem.
Lost Dog said:
I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.
Click to expand...
Click to collapse
how bout checking your bands in the service menu. so *#*#4636#*#* -> phone info -> press the menu key for more options -> select bands -> choose one appropriate for your region (ie "USA BANDS").
If all else fails do a factory reset by going to the settings -> privacy -> restore factory defaults.. of course do a backup/sync/whatever before just to make sure you can get all your apps back.
There's other ways to do a factory reset via the bootloader .. its under recovery and you press up volume or the trackball I think and you can just select all the clear/erase settings there and that should clear out everything on the phone's internal storage.
The factory reset worked for me (via bootloader) when I upped from update-1 to FRF50 and didn't have any data icon next to my signal strength. Could call out but couldn't get data.
Hope that helps.
jasonpich said:
I think it's a hardware problem with a lot of N1's.
Mine was ok the first 2 months, and later, 3g not working. This is driving me crazy ):
I have tried everything. Change the simcard, I did a reset of the data with my telcon, and nothing happens.
I've seen these problems on many N1's.
I hope google / htc release a fix for this problem.
Click to expand...
Click to collapse
Check your APN settings. Do a full factory reset from the bootloader. If nothing works you should call tech support again. Most 3g issues where you have issues with connecting are service/signal level related. I *****ed early about my 3g issues on tmobile and it was the network as they've pretty much gone away with improving the backhaul in my area for HSDPA+ or updates to the phone's radio.
HTC is really really really cool about swapping phones and repairing them. If you feel you have a nexus that has hardware issues call them. I did this 3 times already (one time for minor cosmetic issues with the refurb they sent) and I couldn't be happier about how willing they were to replace/repair the phone. It turns out I really didn't have any issues with them at all.. with any issues with hardware from the second refurbished phone. It was service or software related and I'm happy to say with updates/tmobile service improvements I couldn't be happier with this phone.
blisk said:
Check your APN settings. Do a full factory reset from the bootloader. If nothing works you should call tech support again. Most 3g issues where you have issues with connecting are service/signal level related. I *****ed early about my 3g issues on tmobile and it was the network as they've pretty much gone away with improving the backhaul in my area for HSDPA+ or updates to the phone's radio.
HTC is really really really cool about swapping phones and repairing them. If you feel you have a nexus that has hardware issues call them. I did this 3 times already (one time for minor cosmetic issues with the refurb they sent) and I couldn't be happier about how willing they were to replace/repair the phone. It turns out I really didn't have any issues with them at all.. with any issues with hardware from the second refurbished phone. It was service or software related and I'm happy to say with updates/tmobile service improvements I couldn't be happier with this phone.
Click to expand...
Click to collapse
Thanks blisk, but the thing I don't understand is why Blackberry 9700 with T-Mobile bands, doesn't have problems at all ?
By the way, I rooted my phone , so the thing with the warranty it's complicated
I had it happen last night at work all night, but when i got home i checked my wife's tp2 and it also was doing the same thing so for levity wasn't the phone but tmobile. They started worming the same time also.... I think its tmobile.
Hello, I had the same problem with my imported n1. I'm using the tmobile version non rooted fully stock manually updated to frf83. I did a *#*#4636#*#* and selected wcdma only, rebooted and couldn't connect to my gsm network. Went in again and did a wcdma preferred, rebooted, and I works better, still changes fast to edge and G, but less often, I'm still trying it but I have high hopes its gonna be ok
Mmmm i did have problems with 3G too after pushing FRF83, but i found out that for some reason the APN settings weren't set correctly after the update. In my case the port setting after the proxy of the APN wasn't set, i changed to the correct value and it worked.
In conclusion, check your APN settings.
Just went from FRF72 to FRF83 and it's working fine.
I'm currently set to GSM auto (PRL) in the *#*#4636#*#* and I didn't change it to that after putting on FRF83.

Problem with my Nexus One

3G and H are both different types of 3G. Some ROM will distinguish between them, other ROMs show them both as 3G. H is faster than standard 3G, so you don't have a problem...
Edit: OK, that's weird. My response appears before your question, and the time is wrong...?
Sent from my Nexus One using XDA App
Hi,
I recently brought my Nexus One for repairs because my phone would restart automatically after my phone gets to hot. After I got my phone back from repairs, they must have fixed the problem. But then another problem started! I have problems with my Nexus One to connect to the 3G network in my area.
My Nexus One sees the network. But when I try to use 3G it looks like it tries to connect to it but the network doesn't seem to respond. Then sometimes my phone switches from a "3G" to an "H" and that works always.
Does anybody know what the problem might be? I can't barely send text messages, place calls or use the Internet! I hardly think that its a problem with my network provider considering that my brothers G1 phone works wihtout any problem!
danger-rat said:
3G and H are both different types of 3G. Some ROM will distinguish between them, other ROMs show them both as 3G. H is faster than standard 3G, so you don't have a problem...
Edit: OK, that's weird. My response appears before your question, and the time is wrong...?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
you read minds through the internet!
lawl seriously the forum is having weird bugs....
85882 said:
Hi,
My Nexus One sees the network. But when I try to use 3G it looks like it tries to connect to it but the network doesn't seem to respond. Then sometimes my phone switches from a "3G" to an "H" and that works always.
Click to expand...
Click to collapse
Maybe the idiots at Telamon sent you the wrong model? (T-Mobile vs. AT&T?)
md74 said:
Maybe the idiots at Telamon sent you the wrong model? (T-Mobile vs. AT&T?)
Click to expand...
Click to collapse
If that was the case, he wouldn't be seeing H. If he's connecting on H, then he's all good...
Sent from my Nexus One using XDA App
Check that you're using correct APN for your carrier.
My phone doesn't always switch to the H. Sometimes it sits at 3G and it seems that the network doesn't respond. Sometimes when I use WIFI it takes a few minutes until the WIFI starts working, even though the phone indicated that it connected to WIFI correctly. I was using the standard Android 2.2 ROM from Google but I decided to put on CyanogenMOD a few weeks ago but its still the same problem. I guess I'll just have to deal with it...

3G dropped.. not a reboot fix type drop, just won't come back drop..

Ok, So far I've been loving this phone, no hiccups, no reboots, no problems and loving the battery life.
I live in a 3G only area so I have the phone set to CDMA only all the time. Last night I was having a chat on Google Talk and my 3G dropped, I figured, meh, it's just gonna need a reboot or let it sit for a while to come back. Well it sure didn't.. that was 12 hours ago from posting this. I've tried every toggle known to man, reboots, etc.. Nothing will give me my 3G back. Can someone please help me to prevent from having to call Verizon and go through all the reboot your phone, return to factory settings crap. Then end up with a factory like-new phone when my phone isn't even a month old yet. Wifi is working fine here at work, but I need my 3G.
Mine is screwed today as well... If it takes a factory data reset, I'd just as soon do it on my own. Update to fix isn't due until November... Grrrrrrrrrrrrrrrr...
Anyone with any real solutions? All the reboots/battery pulls/airplane mode toggles have been performed.
Thanks!
GLiDE
If both of you are experiencing issues today it may be something as simple as a network issue.
Sent from my DROID BIONIC using Tapatalk
lrs421 said:
If both of you are experiencing issues today it may be something as simple as a network issue.
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
I thought so, but other people with smartphones around here on verizon aren't experiencing any issues. So I've eliminated network issues as the problem here.
yeah i think must be a network issue
Yep, same here... I even have a guy in another department in the plant with a Bionic and his is working just fine while mine sits brainless. it's definitely not a network issue for mine. aCk!!!
A new SIM card later... DoH
I have been dropping data connections also and it takes awhile to come back on sometimes. Usually if swith from 3g to 4g and such it comes back but I am getting frustrated with it. Other than that I love it.
Yeah, I'm really getting sick of the dropped 3G too, I can't figure out a pattern to it either, just drops out of nowhere sometimes.
I am having the exact same issues......I have power cycled, done battery pull, etc. Does not seem to be a network issue as 3G can be working fine one minute, not working the next, then go back to working again 5 minutes later. The duration almost seems random in nature. Very frustrating. Other than that I love the phone.
Same as pretty much everyone else. Really intermittent data connection problems. Have gone through 3 handsets so far.
Sent from my DROID BIONIC using Tapatalk
Isn't there a number that can be called that updates your phones tower info?
Just found it. Try dialing *228. Not sure if it does anything or not but I have been dropping 3g too. So far my signal is much stronger but time will tell.
I'm having the same problem, but only at work. The signal fluctuates almost constantly from 4g to 3g with 4bars, to no data connection. Outside I get a stable 4g connection. My T-Mobile phone had a stable but weak signal here.
diaco1974 said:
Isn't there a number that can be called that updates your phones tower info?
Just found it. Try dialing *228. Not sure if it does anything or not but I have been dropping 3g too. So far my signal is much stronger but time will tell.
Click to expand...
Click to collapse
I thought *228 doesn't work on LTE phones? Mine won't even make the call when I try it.
esbox said:
I'm having the same problem, but only at work. The signal fluctuates almost constantly from 4g to 3g with 4bars, to no data connection. Outside I get a stable 4g connection. My T-Mobile phone had a stable but weak signal here.
I thought *228 doesn't work on LTE phones? Mine won't even make the call when I try it.
Click to expand...
Click to collapse
It doesn't look like its dialing out. However, I am getting a message that my verizion sim card has been updated. So far I have not lost service in places where I would frequently lose 3g. Could be a placebo effect though.
Alright guys here I go I should of posted this on a topic thread I started couple of weeks ago but whatever here it goes and i hope it helps... So I went through 2 hard resets and one new SIM and so far this is he only thing the worked. Called big red and got a level 2? Tech support and since then have had no problems going on couple weeks now... Didn't see anyone mention this in previous posts. go into settings> Battery and data management > make sure you have "background data" and "data enabled" both checked. Hope this helps has for me and i hope I'm not repeating this info
Sent from my Xoom using XDA App
Did the hard resets and sim change do anything? I have looked at my data settings and both items you mentioned are enabled on my phone.
Well yes on the hard resets and questionable on Sim card but data was still lost Week.later again and this new trick has been working since I did the changes going on about 2 Weeks now
Sent from my DROID BIONIC using XDA App
Mine dropped today, one week into using this phone. Could be a fluke, but here's what worked: toggled LTE back on (no 4g here), then rebooted. Viola! 3g immediately. I really hope this isn't a constant problem...
Sent from my DROID BIONIC using XDA App
Bionic 3g/4g is not working (DROP) "FIX"
After searching around a few days for solution n test many apk and many many methods... Finally found the fix.
Just download "BionicTCP" from market (Play Store) (REQUIRES ROOT), and click on "Large TCP Buffers". It makes my Bionic xt875 3G/4G NO DROP AT ALL.
*BionicTCP : https://play.google.com/store/apps/details?id=com.spirilis.bionictcp
or directly from : http://spirilis.net/junk/android/BionicTCP.apk
By: SPIRILIS

Categories

Resources