Red button "home, then sleep" doesn't work - Touch CDMA Android Development

If I try to set the option in spare parts to make the red button "home, then sleep"...the red button now does nothing. The only option that works is leaving it on sleep.
Does it work for anyone else? Any way to fix it?
I'm running Myn's Warm Donut and the newest of all the files as of about monday.

Have the same issue. Pressing red button once waits for 10-20 seconds then goes home. Next press of red button sends it to sleep. So the feature kinda works, but why it waits 10 seconds instead of just going home?
P.S. Holding back (camera) button for 1-2 seconds goes home too.

The red button option only work in cupcake(1.5)

As the user above said, doesn't work in 1.6.

Related

Black screen

installed htc home customizer and once i figured it out, i hit the power button to put it into sleep mode, it the button again and nothing, no screen nothing, held the button down and the phone wouldnt power off, had to stick the stylus in the rest hole and now it works fine. anybody else have or heard of the same problem?

Blacklight Button Assignment

Ok, so I'm tired of having to hit the button in the top left to turn the black light on - is there a way to have it so that if you hit an assigned button the light will turn on? I hate when it goes out while I'm on the phone, so I wanted to be able to hit the middle button and turn the light back on. Any suggestions?

[Q] screen capture service

Hi guys, I just got my new replacement Bell Samsung galaxy S and have gotten things running on it again, but the damn thing keeps going into some weird screen capture.
What happens is that when I hit the "back" button it will go dark and the "menu" button will light up. repeatedly hitting the back button will do nothing, and hitting the menu button will do nothing. Pressing the center "home" button will take a picture of what I have displayed on the screen.
I go and check my running applications and it shows this "screen capture service" running. I stop it and then I continue on what I'm doing and it happens again, going back to the running apps and it is back.
The only way it seems I can use my "back" button is if i hit the "volume" button on the side and then both the "back" and "menu" buttons will light up, and then I have to wait until they both go dark before I can hit the "back" button and have it work. if I hit it will they are lit up it goes back into the screen capture "mode"
The phone came in the mail with I9000UGJL2, firmware 2.2.
Any advice on how to permanently kill that damn screen capture thing would be greatly appreciated because it is driving me nuts. I get a way with maybe 2 "back" button pushes where it works and then it goes into that mode
Same problem...
Samsung Galaxy S i9000 (Facinate)
It seems that by pressing the back button too quickly puts you in the Screen Capture mode...Back button dims but the Menu button stays lit. I found that if I push the Home button that take s the screen shot, then wait for both the Menu and Back button to come on and then lowlight, I can then hit the back button and continue on for a while?
Package name: com.sec.android.app.screencapture
Source: /system/app/ScreenCaptureService.apk
Please, I would like to find out more about this app in order to try and control it. It really slows moving back when you have to wait for the Menu and Back buttons to lowlight before you can hit the back button again!
Just after posting the above, I was able to Force Stop the package and I have not had a problem with the phone going into screen capture mode since.
Woohoo!
My i9100 built-in Screen Capture Service default output is png format. How can I change it to jpeg format?

[Q]Is there a way to change what buttons do?

As a resulted of my phone getting wet, my home button works only once a day and for a minute each day, and that means i cant control clockworkrecovery.
I want to convert my vol up button to home button, how can i do that?

Black Screen, won't do anything.

Hello,
I have a rooted and TWRP installed but otherwise stock 5.something T710 that I had worked on months ago. It's been great and my daughter had been using it to watch videos a couple days ago. I took the tablet from her at the end of our road trip and noticed it had about 63% battery left. I left it in the truck while we went to the movies(about 40 degrees f outsides) and then drove home without ever touching it until we got home. I went to use it when we got home and it would not turn on. I plugged it in to let it charge thinking it died for some reason, using the stock charger, though battery icon never appeared. The next morning I went to check it and it still would not turn on.
When I press the power button or plug in or unplug the charger the Recent and Back soft key lights will turn on for a second, then turn back off again.
I've tried:
Holding the power button down alone for over 3 minutes.
Held the power and volume up button for over a minute
Power and volume down for over a minute.
Home, volume down and power for over a minute
Home, volume up and power for over a minute.
I can connect it to my computer and it recognizes that my Tab S2 is connected but no files show as the default for the device was just charging mode and not the file modes.
Odin3 v3.10.7 recognizes it as connected. But fails to send the TWRP file again.
Any help?
Since the soft keys light up and the computer recognizes the device, it sounds like maybe the tab is still working but with no display? By any chance did you have adb working? I f so you could try rebooting, or booting into recovery to see if you see anything on the screen. It's possible that when you held the button combos, that it did boot into download and recovery but you couldn't see anything? In which case it could be a hardware problem. Hopefully it will fix itself! Sorry I can't be of more help..
Well adb shows the device as unauthorized. Reboot command says the same thing.
The home key is unresponsive to my finger print unlocks and no sound plays when I try to adjust the volume, like the ding sound it makes to hear if this is the volume level I want. There are never any of the capacitive touch vibrations or whatever its called to feel when you press a button on the screen.
I was wondering if it had something to do with hardware it's just strange that it would stop working from just being in my truck. From my knowledge it was never dropped or bumped heavily or anything, at least recently.
I guess it is possible something just burned up inside, that would be inconvenient, I've got to look up if its still in warranty. I love the size and performance of this thing.
Thanks for replying, hopefully more to come.
Still can't get it to work, same issues as above. I let the battery fully die which took about 2+weeks from the initial post. Which is to say that eventually the back and recent buttons stopped lighting up. I recharged it and after holding the power button for a few seconds the same condition repeated itself. If I touch the power button or home button the back and recent button back lights turn on for a moment and turn off again. There is no other indication of life. I would assume if it was just a dead screen then I should feel it try to turn on.
If I had to replace parts which ones should I look at first? Probably just the main board?
Buy a new one. Send yours in as defect. Done.
erase111
I see that is an old thread, but I having the same issue to a certain degree. The screen goes dark, but I can see the back light. If I play around enough times, (pressing the back and process button, before pressing the sensor button... Sometime, pressing the volume buttons and back button before pressing the sensor button), everything goes back to normal. Of course, it some random time, even when I am reading a web page or some other activity, it will go back to black.
So has anyone figured out what this issue actually might be? I thought maybe it was an issue with the ROM I was using, so I just moved over to LineageOS 16, but the problem still continues!

Categories

Resources