Related
Plz Help Me.....
I Cant Connect My Mobile To Pc Via Activesync Whenever I Upgrade To Windows Mobile 5. I Had The Same Problem Even In Tuma v1.3...
I Have ActiveSync v4.1.0 (Build 4841)
And So I M Not Able To Copy All The Files Of Ext Rom.....
Plz Someone Help Me...
AS 4.2 went final the other day, try the latest version. AFAIK it contains a lot of bug fixes.
Also, some people have problems when plugged into a USB hub, try a direct connection or even another port.
Did you check and see if your mobile network setting (local PC) is set correctly?
Goto My network --> Properties
and you should see a netowrk connection for Windows Mobile Device.
Go to properties, and enable the Internet Protocol for the device.
This is just an updated version of deadnex's original guide, with a few things thrown in from various people who have found what works and what doesn't.
This guide has been used and tested as effective with the windows 7 rc 7100 build.
Step 1 - Go here http://www.microsoft.com/windows/windows-7/download.aspx and download Windows 7. You can get a key from the same place, so don't worry about not having a key.
In the event that the servers aren't offering the download {due to server issues} you can download a current version through a torrent site. I recommend mininova as it's the most legitimate of the bunch.
To get a key for windows 7 (32bit) (if you downloaded it through a torrent site), go to this address https://www.microsoft.com/betaexperience/productkeys/win7-32/enus/default.aspx
(64bit)
https://www.microsoft.com/betaexperience/productkeys/win7-64/enus/default.aspx
To clarify this part, you're setting up a usb flash drive or usb card reader and sd card to work as an installation drive for windows 7. I've followed these steps exactly, and found them to be completely accurate. They work, so do each step, and make sure to keep track of your steps so as not to miss one.
Thanks to deadnex for all of this information.
USB-install:
User feedback suggests that doing this next part should be done on a computer running windows vista. In winXP, your usb drive might not show up during the process.
edit (before step 1, create a folder on your main computer called windows7. Don't do this on your shift, and it's recommended to use c:\windows7\ to make the process easier. If you use another location to extract the files to, make sure to remember which directory it is, and adjust the steps of this tutorial to your own location.)
1 - Open the windows7 Iso file with winrar, and extract all the files into C:\WINDOWS7\ (or the folder you created as mentioned above)
2 - Open command prompt in administrator mode (start - all programs - accessories - (right click) Command Prompt and select run as administrator.
3 - Then type these commands without the - and press enter after each :
- CD\
- DISKPART
- LIST DISK
- SELECT DISK X ( X is the memory stick disk number you got from LIST DISK)
- CLEAN (CAUTION; THIS WILL ERASE ALL THE CONTENTS OF THE SELECTED DISK)
- CREATE PARTITION PRIMARY
- SELECT PARTITION 1
- ACTIVE
- FORMAT FS=FAT32 QUICK
- ASSIGN
- EXIT
- XCOPY C:\WINDOWS7\*.* /S /E /F U:\ (U:\ is the name of usb drive you are using for your install, if your drive has another letter, which is most likely, of course put in your own) (after *.* and after each letter preceded by / there's a space!)
OPTIONAL- Include an extra folder on your windows7 usb drive called drivers, and put all the drivers in there that you'll need to get windows 7 running smooth. Drivers are listed just a little further down on the page, so before completing the next step, go there and get the drivers.
WARNING- THIS WILL ERASE YOUR VISTA AND REPLACE IT WITH WINDOWS 7. THIS IS IT!!! Don't worry, win7 rc 7100 is far better anyway. Just to be safe though, backup your personal data before continuing to the next step.
[edit] With a little use and time, I've come to find that windows 7 has a great amount of compatibility issues with certain games. Although I've only had the chance to try a few, there seems to be a trend with win7 being unable to run a lot of older, but still 3d, games. Warcraft 3, and Dungeon Keeper 2, to be more specific. If you're not a gamer, it shouldn't matter, and Windows 7 is still the best choice for you. If you do like to play games, you might want to reconsider changing to windows 7. [edit]
Restart your computer, at startup push FN+F10, and choose your usb drive.
This will take you to the installer, select your language, timezone, and keyboard layout. Next.
In summary, you're going to select Custon (advanced) in the windows 7 installation process, and some card readers (sd to usb) don't work.
This will not affect your HTC SHIFT Vista recovery partition but it will remove Vista itself from your shift. Your settings from Vista will not be carried over to Windows 7.
_________________________________________________________________
DRIVER DOWNLOADS AND INSTALLATION.
Well, once you're through all that, you should be looking at your new windows 7 shift. Now's the fun part! Driver installation!
Go to this link, and download all of the drivers. (10 in total)
http://www.htc.com/www/SupportDownload.aspx?p_id=60&cat=1&dl_id=82
Putting these files on the same flash drive as your windows 7 install makes matters much easier for this time and next time should you need to try again. I also recommend copying and pasting the installation order from the htc site in a notepad or wordpad file and putting that in the same folder as your drivers. That way, when it's time to install your drivers, you can open that file, and use it as a reference to ensure you have the order correct. Chances are that your shift won't connect to the net, right after the win7 installation.
IMPORTANT IMPORTANT IMPORTANT
INSTALL EACH DRIVER IN THE ORDER THAT HTC HAS LISTED ON THEIR DRIVER DOWNLOADS PAGE. DO THIS OR FACE TOTAL DEATHKILL!!! actually, you'll just have driver issues, but that SUCKS!
After many people have responded, I wish to remind everyone. Install all the drivers. INSTALL ALL THE DRIVERS. Install all the drivers. Yes, I said that three times. Although your shift seems to work, when only installing a few, the fact is, drivers like the synaptics touchpad driver also control other parts of your shift, like the two face bottons above the touch pad. If you install one driver, and skip one in between, you mess up the order of installation that is so important, and then force yourself to need an entire wipe and reinstallation of win 7. So, one more time, INSTALL ALL THE DRIVERS FROM HTC.
One more important thing to know about the drivers is, DON'T LET WINDOWS RESET AFTER INSTALLING EACH DRIVER, select RESTART LATER AFTER INSTALLING EACH DRIVER. I REPEAT, INSTALL ALL DRIVERS (IN ORDER) BEFORE RESTARTING WINDOWS.
IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
To save yourself a headache, copy and paste the following list into a wordpad file and place it in the same directory as your driver downloads. Putting this list in the same directory on your win7 flash card means that you can open it on your shift after installing win7 and use it as a reference when installing your drivers. Keep it all together.
EACH DRIVER IS 100% IMPORTANT AND NEEDED, DO NOT SKIP DRIVERS, EVEN IF THAT DEVICE SEEMS TO BE WORKING ALREADY. SKIPPING THE TOUCHPAD DRIVER MEANS THAT THE RESOLUTION AND COMM CENTER BUTTONS DON'T WORK. SKIPPING THE SOUND DRIVER MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN. SKIPPING THE VIDEO DRIVERS MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN.
DON'T SKIP DRIVERS.
Here's the order.
a. VISTA_INTEL Chipset Driver v8[1].3.0.1014
b. Intel VGA driver(7[1].14.10.1461)
c. VistaECDrvV1[1].0.1.10
d. TouchScreen(1[1].1.0.2)
e. Synaptics MicroPad(10[1].0.11.1)
f. Realtek Audio Driver R197(6[1].0.1.5653)
g. Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0 *
h. Extension Kit USBLanDriver(3[1].8.3.7)
i. Shagctrl_1[1].2.6.122-control center
j. Marvell WiFi driver(8[1].114.123.139)
This next part was contributed by Thaihugo. Thank you a ton for this contribution Thaihugo .
To connect the Windows Mobile (your Shift's other OS) side to the PC side of your Shift, run USB Tools in the windows mobile side. If nothing happens, go to your settings (still in mobile)- Connections, then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools first). Another note, some roms, for the wm side of shift, don't include the internet sharing app. If you can't find it, you've got a crap rom, and you should follow a guide which will allow you to put a real rom on it.
Make sure you are connected to the internet on win7 side (using wifi for example) to download WMDC (Windows Mobile Device Center).
If WMDC doesn't load, plug another pocket pc into the shift's usb port while running windows7 and it will download , or if you don't have another pocket pc lying around, download it manually from Microsoft.
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective.
Again, a big huge thanks to deadnex for originally posting the steps to this process. And thanks to everyone else who contributed to a better running shift via windows 7.
Caid.
444
You forgot to specify that drivers must be installed with Vista Compatibility mode enabled and run as Administrator
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
thanks for the reminder.
weird, list disk doesn't list my usb flash drive but lists all my other hard drives. what am i doing wrong?
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Thanks for your description. It looks good. Only onr thing let me bluescreen
my Shift. Whenever I install Synaptics MicroPad(10[1].0.11.1) my Device ended with a bluescreen. I tried a newer Version from the website, but no way, same result. Does anybody understand why? Does someone found out same?
Greets
Androgyn
thaihugo said:
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Click to expand...
Click to collapse
I've added this part, thanks again Thaihugo.
Caid
444
thaihugo said:
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Click to expand...
Click to collapse
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Greenarcher707™ said:
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Click to expand...
Click to collapse
It's like driving a race car compared to vista.
apoparis said:
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
Click to expand...
Click to collapse
Please, is there anybody who can help me resolve my problem? I tried lots of times by nothing works..I'm reading all these positive comments about win7 and I can't wait to have them on my shift.. I can see the usb, I browse there to the folder I have the drivers but can't install them.
Thank you in advance
This is for those who've encountered problems.
Start the whole process over again. I didn't make the guide clear enough when I first posted this thread. It's clearer now. The symantec drivers are probably fine, you're probably crashing because windows aero is still enabled, and it is crashing your shift whenever it tries to switch to high res mode. Disable aero.
As for apop, you need to install via the second option, not the first. I got the same error when I selected the first install option when I booted into the windows 7 installer. This method will completely remove vista as the main os and put it in another folder. As a precaution, I recommend backing up personal documents that are stored in any windows sub directory. *word documents and the likes.
Anything outside of your windows directory, or on the main hard drive itself should remain after the install, but I only did this process once with extra stuff on the drive (it stayed).
Back it up, and do a fresh install.
Caid.
444
Thanks for your anser Caid. I just don't have an external DVD.. Is it impossible to go through 1st way? I have read that some people managed to do it this way..
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
thaihugo said:
It's like driving a race car compared to vista.
Click to expand...
Click to collapse
wow, that got me convinced. installing windows 7 right now. gonna probably stay up late ha ha
Caid444 said:
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
Click to expand...
Click to collapse
Yes, I'm using a usb card reader and sd card. I don't have two options (custom/express). Just one "install now"..
P.S. Thanks for your interest in my case.
ok
After you select "install now" there'll be a license agreement. After that there'll be a choice between two install options. You need to choose the second one.
Caid.
Can someone explain to me how to set up a cellular internet connection through windows 7? I've got the sim card inside, the phone recognizes it, but I don't know how to get it working through win7, I used control center to enable modem, but still no luck. This is really annoying.
Caid.
444
SnapView Turn's and WM7 too ... the screen goes off
Hi, I completed the W7 installation successfully. I even got to conect SnapView with W7 this time. I say this time because with the previous Wm7 guide I wasn't able to do it.
Anyway, now my screen is blank for WM and W7. In fact I have to press the on switch to get the W7 screen back. Once I have W7 working I need to reset Snapview throught the Shift Control Centre to get it going. Finally Snapview / WM comes on. However it lasts on for a few minutes and then the screen is off again. W7 will last for a few minutes more and the same will happen. I then need to press the sliding switch again. The W7 screen will turn on back to normal (the OS doesn't actually turn off but just the screen); however, WM doesn't turn on (in this case it's the screen and WM itself). I then need to repeat the resetting process again.
I did do this:
"
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective"
I did it at W7. Am I missing something? Any hints from the experts? Needless to say, everything was working fine with Vista.
Thanks
I have seen the minimum requirement for running Windows 8 Consumer Preview as follows:
•1 GHz or faster processor
•1 GB RAM (32-bit) or 2 GB RAM (64-bit)
•16 GB available hard disk space (32-bit) or 20 GB (64-bit)
•DirectX 9 graphics device with WDDM 1.0 or higher driver
(http://blogs.msdn.com/b/b8/archive/...-consumer-preview-system-recommendations.aspx)
As far as I can see the biggest limitation is the 1 GHz processor as the Shift has a measly 800 Mhz clock speed. I dont know about the DirectX 9 graphics card.
Has anybody to install the latest Windows 8 Consumer Preview on the Shift. I happy with Windows 7 but if 8 is useable and performs better I would be happy to upgrade......
I just installed Windows 8 Consumer Preview and it seems to be much smoother and faster than Windows 7. Only problem is Metro apps need at least 1024x768 resolution to run. I also needed to replace ResolutionSwitchLauncher.exe (C:\Program Files\HTC\ResolutionSwitchLauncher.exe) with this:
http://forum.xda-developers.com/showthread.php?t=438768
because for some reason I couldn't install .net framework 3.5
JaWe said:
I just installed Windows 8 Consumer Preview and it seems to be much smoother and faster than Windows 7. Only problem is Metro apps need at least 1024x768 resolution to run. I also needed to replace ResolutionSwitchLauncher.exe (C:\Program Files\HTC\ResolutionSwitchLauncher.exe) with this:
http://forum.xda-developers.com/showthread.php?t=438768
because for some reason I couldn't install .net framework 3.5
Click to expand...
Click to collapse
Whaooh nice. Is everything else working nice and smooth. What about the resolution changer? Did you have to manually install the Windows 7 drivers like we did from Vista to 7. By the way can you upgrade the preview directly from 7 to 8 or it has to be a clean install.
Please consider doing a short write up/how to install 8 Consumer Preview.....
[GUIDE] Installing Windows 8 Preview on the HTC Shift
It can't be all that unsimilar to this installation guide, can it?
http://forum.xda-developers.com/showthread.php?t=1264742
Installed Win 8 Consumer Preview and it works like a charm
I have installed Win 8 Consumer Preview using the instructions posted on XDA for Developer preview and didnt face any issues.
Everything works smooth and it is much slicker and smoother than developer preview.
If you try updating directly from the microsoft site it downloads an installer file and it stops after it detects that the ****s processor is les than 1 GHz and asks you to upgarde it. The alternative to this is.
1. Down load the iso image onto your shift (make sure you are downloading the 32 bit one)
2. Extract the contents of the iso image using 7zip or Win Rar
3. Dont run the setup.exe on the root folder instead navigate to the folder named "sources".
4. Inside this file you will find a setup.exe file, just run it and you are done (ensure you are on mains power else the set up will get stopped at one point, also make a note of the Serial Key from the microsft site as you will as)
5. Select the option-2 (one which is at the bottom) after you run the setup.exe.
6. There will be couple of restarts and you are done.
7. As expected after complete installation you dont have the wifi and touch set up and you need to this manually. (just follow the steps exactly in the same sequence mentioned in the link in the post above this).
You are done and enjoy your HTC Shift with windows 8 consumer preview.
W8 on shift
I have W8 consumer preview installed on my Shift and everything is working.
-if you want metro apps, you must change the resolution (not good)
-sometimes it won't detect my SD card (maybe I have faulty one)
-if I restart or wake shift, wifi isn't working (must go to shagctrl and turn it off and on again, then it works)
-consumer preview is slower in start and a bit slower in use than developer preview
Got the consumer preview running. The default apps (mail,contacts.calendar)
are horrible Very sluggish and many options missing. Hope they improve.
On a side note : Cannot even find option to NOT USE SSL for exchange 2003 server.
It has potential though, the new tile based stuff is nice for our shift.
kruger.killer said:
I have W8 consumer preview installed on my Shift and everything is working.
-if you want metro apps, you must change the resolution (not good)
-sometimes it won't detect my SD card (maybe I have faulty one)
-if I restart or wake shift, wifi isn't working (must go to shagctrl and turn it off and on again, then it works)
-consumer preview is slower in start and a bit slower in use than developer preview
Click to expand...
Click to collapse
mine won't detect sd card as well
since marvel wifi on sdio, then it won't be detected also
If you've installed consumer preview, could you please post how you got wifi working? the marvel wifi device is found in windows 7, and the developers preview, but it's no where to be found on consumer preview, so no wifi or no consumer preview seem to be the only options I can find as of now.
dony71 said:
mine won't detect sd card as well
since marvel wifi on sdio, then it won't be detected also
Click to expand...
Click to collapse
I fixed the driver for sd, and wifi.
You need 2 files from the old releases, sdbus.sys and dumpsd.sys. You need to put them in this path: c:\windows\system32\drivers\
Files needed:
http://nasomi.com/sdbus.sys
http://nasomi.com/dumpsd.sys
To replace them in release preview, it's tricky.
1. Have them on an sd card from the old version, i'll upload them for those that want when I get a chance.
2. right click on desktop, new, shortcut. type cmd, click next, ok.
3. right click on the shortcut, hit run as administrator
4. type: takeown /f c:\windows\system32\drivers\sdbus.sys and hit enter
5. type: takeown /f c:\windows\system32\drivers\dumpsd.sys and hit enter
6: type: cacls c:\windows\system32\drivers\sdbus.sys /G jay:F <note that jay is my username and you will have to replace ONLY that portion with your login name.
8: type: cacls c:\windows\system32\drivers\dumpsd.sys /G jay:F <same as above, replace jay with your login
9. you should now be able to replace the old files when you drag them over and click overwrite/replace
10. restart.
Got Wifi to work, SD Card Still Code 10
jay6700 said:
I fixed the driver for sd, and wifi.
You need 2 files from the old releases, sdbus.sys and dumpsd.sys. You need to put them in this path: c:\windows\system32\drivers\
Files needed:
http://nasomi.com/sdbus.sys
http://nasomi.com/dumpsd.sys
To replace them in release preview, it's tricky.
1. Have them on an sd card from the old version, i'll upload them for those that want when I get a chance.
2. right click on desktop, new, shortcut. type cmd, click next, ok.
3. right click on the shortcut, hit run as administrator
4. type: takeown /f c:\windows\system32\drivers\sdbus.sys and hit enter
5. type: takeown /f c:\windows\system32\drivers\dumpsd.sys and hit enter
6: type: cacls c:\windows\system32\drivers\sdbus.sys /G jay:F <note that jay is my username and you will have to replace ONLY that portion with your login name.
8: type: cacls c:\windows\system32\drivers\dumpsd.sys /G jay:F <same as above, replace jay with your login
9. you should now be able to replace the old files when you drag them over and click overwrite/replace
10. restart.
Click to expand...
Click to collapse
Thanks !!!!!!!!!!
I got Wifi to work with your instructions. However, I still get code 10 on the SD Card in device manager.
I repeated the instructions twice.
The driver errors out, and has some text about SDSTORE.INF
JHope you can help, the Shift is now almost 100% functional !
thanks
yes, the wifi works upon copying two sys files following the useful instructions. only one problem: win8 is down while sd card inserted. thanks a lot for the wifi function. and if possible, any advice for sd card?
lucid said:
Thanks !!!!!!!!!!
I got Wifi to work with your instructions. However, I still get code 10 on the SD Card in device manager.
I repeated the instructions twice.
The driver errors out, and has some text about SDSTORE.INF
JHope you can help, the Shift is now almost 100% functional !
Click to expand...
Click to collapse
AT LAST, My WiFi WOKS, WORKS, WORKS
I have a HTC Shift x9500 (Clio 200). At last, after months searching, my wifi finally works too :victory:, and did it only changing sdbus.sys by an old version (I used the Windows 7 version). I was using an USB dongle, but no more. Like the others, the SD card doesn't work.
However, thank you very much for WiFi function.
Windows 10 Windows Technical Preview is available for more than a week. Since i have an extra old 40gb hdd for the shift, i decided to give it a try, and i can say that it works perfectly well. Everything works including touchscreen, wifi, bluetooth, modem, etc.
However installing the drivers may be a little tricky. Here are the steps:
1. Download Windows Technical Preview from microsoft website (download the x86 version)
2. Extract the .iso file to a usb stick (i used power iso to do that)
3. Plug the stick to the shift and boot from it
4. Follow on screen instruction to install windows
5. When done copy the drivers for the shift (you have the download link bellow the video ) to a stick
6. First install "VistaECDrvV" in compatibility with windows vista (right click on the file - properties - compatibilty tab- run this program in compatibility mode for: - select windows vista (service pack 2) !! do that for all of the drivers) - restart later
7. Install "TouchScreen"
After installing touch screen driver the touch should work - give a restart
8. Install "Synaptics MicroPad" - restart later
9. Install "shagctrl" ignore the Microsoft .NET Framework missing error - restart later
10. Install "Marvell Wifi driver" - restart later
11. Press the Win+R key combination and type msconfig in the run box and hit enter - switch over to the boot tab, and click on the Safe Boot check box - select minimal -apply -ok - restart
13. With windows booted in safe mode navigate to C:\Windows\System32\drivers right click on "sdbus.sys" -> properties -> security -> advanced -> owner TrustedInstaller click on change -> in the field labelled "enter the object name" type your username -> ok -> apply -> ok -> now back on security tab edit permissions -> click on users -> check all boxes from "permissions for users" tab on allow -> apply -> yes -> ok. Now delete "sdbus.sys"
14. Copy the "sdbus.sys" from the archive that i attached here to C:\Windows\System32\drivers
15. Press the Win+R key combination againg and type msconfig in the run box and hit enter - switch over to the boot tab, and unthick the Safe Boot check box - apply -ok - restart
16. You should have wifi working now - If you cannot find any wifi networks, as it was in my case, go to device manager - right click on the "Marvell sd8686 Wireless LAN SDIO Adapter" (the one without the exclamation mark if you have two) - properties - advanced - from the property box select 802.11D support - on the value box value box select enable. Your wifi should work ok now.
17. Install the "sherry driver 1.3" for the best performance of the video card.
18. That's it! enjoy
What i like most about windows 10 is that it have a "card view" of the running apps just like maemo 5 on noka n900, or the blackberry 10 os. Overall it runs a little better than windows 7 and similar with windows 8.1.
Maybe i will install it as a replacement for windows 8.1 update 1 on the main 120 gb hdd
Here is a small video to see how it runs:
Download HTC X9500 DRIVERS
ryu1 said:
Windows 10 Windows Technical Preview is available for more than a week. Since i have an extra old 40gb hdd for the shift, i decided to give it a try, and i can say that it works perfectly well. Everything works including touchscreen, wifi, bluetooth, modem, etc.
However installing the drivers may be a little tricky. Here are the steps:
1. Download Windows Technical Preview from microsoft website (download the x86 version)
2. Extract the .iso file to a usb stick (i used power iso to do that)
3. Plug the stick to the shift and boot from it
4. Follow on screen instruction to install windows
5. When done copy the drivers for the shift (you can find them on this forum) to a stick
6. First install "VistaECDrvV" in compatibility with windows vista (right click on the file - properties - compatibilty tab- run this program in compatibility mode for: - select windows vista (service pack 2) !! do that for all of the drivers) - restart later
7. Install "TouchScreen"
After installing touch screen driver the touch should work - give a restart
8. Install "Synaptics MicroPad" - restart later
9. Install "shagctrl" ignore the Microsoft .NET Framework missing error - restart later
10. Install "Marvell Wifi driver" - restart later
11. Press the Win+R key combination and type msconfig in the run box and hit enter - switch over to the boot tab, and click on the Safe Boot check box - select minimal -apply -ok - restart
13. With windows booted in safe mode navigate to C:\Windows\System32\drivers and delete "sdbus.sys" and "dumpsd.sys"
14. Press the Win+R key combination againg and type msconfig in the run box and hit enter - switch over to the boot tab, and unthick the Safe Boot check box - apply -ok - restart
15. When booted in normal mode copy the files from the "wififix" archive, that i attached to C:\Windows\System32\drivers and restart
16. You should have wifi working now - If you cannot find any wifi networks, as it was in my case, go to device manager - right click on the "Marvell sd8686 Wireless LAN SDIO Adapter" (the one without the exclamation mark if you have two) - properties - advanced - from the property box select 802.11D support - on the value box value box select enable. Your wifi should work ok now.
17. Install the "sherry driver 1.3" for the best performance of the video card. Search it on google.
18. That's it! enjoy
What i like most about windows 10 is that it have a "card view" of the running apps just like maemo 5 on noka n900, or the blackberry 10 os. Overall it runs a little better than windows 7 and similar with windows 8.1.
Maybe i will install it as a replacement for windows 8.1 update 1 on the main 120 gb hdd
Here is a small video to see how it runs:
Click to expand...
Click to collapse
Thanks alot, I am going to install it now
http://www.mediafire.com/download/c9g6a23223zr3sk/sherry1.3.2betaGMEGSE.rar
Excellent how-to. Clear and precise.
For those who want to perform it: taking a look at ryu1's comment in Post#14 is crucial!
You bring shift to future.
Also an interesting Video- as i see you've only 1GB RAM installed, and nevertheless your Shift runs pretty fast-
faster than mine with 2GB and Win7U.
Network connection, connection to SnapVue... i'm really amazed.
How long does it take to boot, and what about GPS?
Think i'll create a new partition on my 128GB SSD and run Win10 from there.
How large do you think should it be?
B-44 said:
Excellent how-to. Clear and precise.
You bring shift to future.
Also an interesting Video- as i see you've only 1GB RAM installed, and nevertheless your Shift runs pretty fast-
faster than mine with 2GB and Win7U.
Network connection, connection to SnapVue... i'm really amazed.
How long does it take to boot, and what about GPS?
Think i'll create a new partition on my 128GB SSD and run Win10 from there.
How large do you think should it be?
Click to expand...
Click to collapse
Well, i'm sure gps work ok (at least on the windows mobile side) but didn't tested on the windows 10 side.
For booting, i'm sure it take less than 1 minute, but don't know the exact time.
If you want to make a partition for win10, that should be at least 10 gb.
It would be really nice to see how it will run on your shift with 2gb of ram.
Please post the result if you install it
Made 20GB... had been frequently suggested for win8
Now taking a look if I've got a spare usb stick.
Maybe I'm missing something here. On my X9500 I can't get by the error about the 800 MHz processor. Maybe you are on a different model?
Same thing occured with win8 if i recall right... early releases worked fine, and later ones also came up with this problem. (It may have been with BenQ MID S6 instead Shift, I'll try to find out.)
Don't know if there had been some workaround.
As MS is continuously working on it, it may depend on the releases' date.
Mine dates october 20th, but i won't be able to test until next weekend.
If ryu1 doesn't have another idea, it may be useful to share the release he uses.
The processor should always be the same.
edit: Post#86
http://forum.xda-developers.com/showthread.php?t=1264742&page=9
What error are you talking about? i installed windows 8, then 8.1 and now 10 but never got any error about cpu.
Are you sure you didn't download the 64 bit version?
Win 10 Technical Preview lists as a requirement:
Processor: 1 gigahertz (GHz) or faster
Error complained about lower specification.
It was the 32-bit version.
"error" may be the wrong word.
The problem had been discussed in the thread i have linked above.
Again: it may be interesting to know the date of release.
ryu1 said:
What error are you talking about? i installed windows 8, then 8.1 and now 10 but never got any error about cpu.
Are you sure you didn't download the 64 bit version?
Click to expand...
Click to collapse
Maybe i've got it...
in your how-to you say "Plug the stick to the Shift and boot from it".
You mean plug it in, start your shift, enter boot options and select usb stick to boot from, right?
I had prepared my usb stick with powerISO, plugged it in, opened my stick in devicemanager and doubleclicked "Install".
And ran into "your device won't be able to run Win10 because of less than 1GHz".
Maybe this was my mistake, and i won't have this problem when booting from stick.
Will report asap.
That's it..
Just do what daddy told us
(And DON'T use windows installer.)
I haven't finished installation completely,
but right now i must say speed is amazing!
As some drivers are automatically installed to volume "C" i think i'll switch the names of C and X
(the partition i'm installing to), reinstall all drivers and then switch back.
edit: obsolete, win has done it by itself
Sorry for the delay, but i am very bussy these days. Anyway the installation mus be done by booting from usb stick, not via installer.
I have allready installed windows 10 on the main hdd instead of windows 8.1. There are a few things i forgot to mention on the first post, when booting into safe mode to delete the "dumpsd" and "sdbus" files you'll need permission to delete them. Just follow this instructions to change the permission: http://www.askvg.com/guide-how-to-take-ownership-permission-of-a-file-or-folder-manually-in-windows/
That's what i just was about to ask you, as i am stuck at this point...
Will try later and report
Tomorrow.
edit: Think you should for your own sake update your initial post, concerning boot process and rightsmanagement.
Further visitors won't follow the whole thread and'll bomb you with questions.
B-44 said:
"error" may be the wrong word.
The problem had been discussed in the thread i have linked above.
Again: it may be interesting to know the date of release.
Click to expand...
Click to collapse
Oh, by error I meant I received an error message when trying to do the install the way I had tried it. I will read the new information posted here, thanks all.
Finished installation yesterday, everything was fine, quick'n'clean when suddenly wifi stopped working.
Marvell shows error code 10 and winupdate seems to have installed a different adapter.
SD adapter same error.
Had a similar experience when i installed win7, but there i already had a restore point to return to,
and since then everything was fine.
Will make a clean reinstallation, and after adding the wififix disable wifi to avoid possible system updates
and create a basic restore point i can return to each time winupdate kills something.
Preview build 9879
Anyone managed to get the latest build to work. Mine gives a message that my display resolution is too low and stops the upgrade.
Shame really as this works very well on the Shift, and with rumours that win 10 could be free it would have been a good o/s for this computer.
Please post code 0f builtversion.
Build 9860
Teclast X98 Air 3G Tablet: 9.7" 2048x1536 px - Z3736F - 3G - Android/Windows 8.1
Hi to everyone,
I would like to apologize because my english is not so good.
This thread could be usefull for to get informations and modding istructions about the tablet Teclast X98 Air 3G.
I'm waiting for delivery via dhl and i guess some of the user here could think that the air 3G is an interesting tablet considering dimensions, cpu, display and the dual OS support .
I would like to point out that given the architecture and hardware of this tablet since the Teclast has released firmware for Android (standard) and Windows 8.1 (still in beta), even though I opened the thread in the Android tablet could be open also a thread in the Windows 8 section.
It was necessary to open a new thread because following the thread on the x98 Air teclast someone has mistakenly flashed a firmware dell'X98 air thinking it would go well on the X98 air 3G.
These are the hardware specifications:
Brand Name: Teclast
Teclast Model: X98 Air 3G
Processor Model: Intel Bay Trail-T Z3736F
Processor Main Frequency: Quad Core, 64-bit, 2.16GHz
GPU: Intel HD Graphics GEN7
Memory Capacity: 2Gb DDR3L
Tablet Data Capacity: 32GB
Screen Size: 9.7"
Display resolution: 2048X1536
Screen Technology : IPS Retina 10 Point touch Capacitive Screen
Dimensions : 240mmx169mmx7.4mm
Camera (Front): 2MP
Second Camera (Back): 5MP
Net Weight: 498g
Network Communiction: Built-in 3G,Bluetooth,Wifi
Extend Port: 3G External,Earphone Jack,OTG,TF card,Mini HDMI
Supporting Language: English,Russian,Spanish,Swedish,Portuguese,Turkish,Italian,German,Chinese,French,Japanese,Polish,Ukrainian,Greek,Hebrew
Other Feature: GPS, G Sensor,Phone Call
Operating System: Android 4.4
Cell Capacity: 8500mAh
OFFICIAL LINK
http://www.teclast.com/zhuanti/X98Air3GWin8/
SOME REVIEWS
http://mikecanex.wordpress.com/2014/09/18/teclast-x98-air-3g-gets-a-review/
http://translate.google.com/transla...s.imp3.net/thread-11183835-1-1.html&sandbox=1
http://bbs.teclast.com/thread-253051-1-1.html (you must be registered)
VIDEOS
Dual boot: www.youtube.com/watch?v=29dtAF39R9c
Dual boot conversion (with some usefull files): https://www.youtube.com/watch?v=qxpU_hFup64
Win 8.1: http://www.youtube.com/watch?v=Q3e_KTfbSK0
Win 8.1 - Multitasking and desktop mode: http://www.youtube.com/watch?feature=player_embedded&v=YHNki9ZBRgQ
Win 8.1 Gaming - Team Fortress 2:http://www.youtube.com/watch?feature=player_embedded&v=V8SpGjc3H4Y
Win 8.1 Gaming - Counter Strike Global Offensive: http://www.youtube.com/watch?v=rvwIxm2mCZw
Win 8.1 Gaming - Asphalt 8 (1366 x 768): http://www.youtube.com/watch?feature=player_embedded&v=qrJAGQ9iEYE
USEFUL TOOLS
VRoot : http://www.mgyun.com/vroot
VRoot chinese version (recommended) : http://d-h.st/lWu (Thanks to SUMMERBREEZE)
SRSroot: http://j.gs/4cyJ
Create ISO with driver : http://www.wincert.net/forum/files/file/5-win-toolkit/
Create bootable USB pen drive : http://rufus.akeo.ie/?locale=it_IT
REPOSITORIES WITH MANY THINGS (thanks to Frontiers and Hendrickson)
http://d-h.st/users/Frontier?fld_id=40727&s=file_size&d=DESC
http://techtablets.com/teclast-x98-air-3g/downloads/
BENCHMARKS
http://www.futuremark.com/hardware/mobile/Teclast+X98+Air+3G/review
OPEN A TECLAST TABLET (thanks to supercowz)
https://www.youtube.com/watch?v=841pMJC_QOk
ENGLISH REVIEW (thanks to Hendrickson)
techtablets.com review
ITALIANS REVIEW AND TUTORIALS (thanks to topdigamma.it)
Topdigamma.it Review
POSSIBILITIES FOR RECHARGE (thanks to cvfancypants)
Included Chinese Charger (TP-U25)- 5.0V/2.5A + Included USB cable
Belkin Boost Up (F8J040kr)- 5.0V/2.4A + Included USB cable
Samsung Charger (EP-TA11KWK)- 5.3V/2.0A (attached USB cable)
ANDROID DEVELOPMENT
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested for the model C6J6
ROOT INSTRUCTIONS WITH VROOT (thanks to zackman)
http://androidxda.com/download-vroot
VIDEOTUTORIAL VROOT USE
https://www.youtube.com/watch?v=cRgHZSnLmus
Note: someone has done the root through Vroot (english version) only after using Kingroot http://www.kingroot.net/
VIDEOTUTORIAL SRSROOT USE
https://www.youtube.com/watch?v=cRgHZSnLmus
FIRMWARE ANDROID
Teclast: http://dl.vmall.com/c0jpmqz7r5 (passw:C6J6)
Intel: https://01.org/android-ia/downloads
ADB DRIVER
https://mega.co.nz/#!3JshGCLB!6ldn4tPJZlZtDvlR17pmxhqxkrDs4OxxyCJhIHyhZ-4
http://www.koushikdutta.com/post/universal-adb-driver
FRONTIERS X98 TOOLBOX (for easy rooting)
https://www.oboom.com/MCY35B1Z
Just extract it and run "1_Toolbox.bat".
The rest is self explanatory.
If you have some difficulties you can follow these istructions: 25gee's tutorial
TOOLBOX WITH SU - updated to 2.43 - now root works without any problem if someone needs it
https://mega.co.nz/#!Mp50gIoD!ErMC5F...f9Qff_FQY0apcw
ALL THE APKS COMES IN /system/app STOCK ROM (thanks to migui88)
https://mega.co.nz/#!wYBixJaR!U6hO52KW0Wg_hy8OC8OBXP7ATmdpXmMWZNq9mHP2hMQ
ANDROID ROMS
CHINESE LITE 4.4.4 ROM (without bloatware and with lollipop keyboards)
https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
SUPERCOWZ X98 Air 3G (C8J7)-Android4.4.4-V2.00-1CF3.rar 556.1 Mb
https://mega.co.nz/#!zVdgWJyS!Vh7zGqX6NcYgXrCf-5v_qmEReZXuicvGzw6h1u5OnGo
jcespi2005 LIte ROM
v2.0 - C6J6 (Based on 2.01 Stock)
https://mega.co.nz/#!oQFU1CbR!NgwcEag4D1fuiVyS5qklyGq2wvMuPfwAwvHmFYzS4r4
v1.0 - C8J7 (Based on 2.02 Stock)
https://mega.co.nz/#!QY9kUQCI!hsPc8259qi0TmJhRmnc42inPEhFmpw-75fYxqrons6k
Description:
Fully rooted (Just launch SuperSU and update binary)
Deodexed
Zipaligned
Chinese Apps deleted (system should boot EN locale)
Nova Launcher as default Launcher (and the only one)
Google Play Fixed (integrated on System partition)
Audio fix by Frontier
Viper4Android
TeclastAutoUpdate (Just in case)
ES File Explorer
Three XML, one stock, one for 1Gb System, 128Mb Cache and 5Gb Data (for Dual Boot) and the other one to flash SYSTEM partition
mirek190 rom v3.1
v3.0 - C6J6
https://mega.co.nz/#!41IQHCDZ!g09l4U...A-30nY3DybSl2g
https://drive.google.com/file/d/0B8B...ew?usp=sharing
v3.1 - C8J7
https://mega.co.nz/#!8s4j0DZS!G6d9Ft...PI6fojDtwprLnM
https://drive.google.com/file/d/0B8B...ew?usp=sharing
v3.1 - C9J7
https://mega.co.nz/#!Yo4i0KJD!dnSXlt...jSH13iHvoHyc0o
https://drive.google.com/file/d/0B8B...ew?usp=sharing
Description:
ability to flash only system ( data and partitions are not touched ) or full flash.
system partition 1 GB instead of 1.5 GB -default but you can change it.
cache 100 MB instead of 1000 MB - is completely enough I tested but you can change it.
data partition 27 GB instead of 25 GB - I added other partition tables for data like 1 , 2, 3, 4, 5 ,6 ,7 ,8 ,9 , 10 GB , only android ( 27 GB ) , only windows 27 GB as well ) or default.
fully rooted
removed all Chinese programs
busy box
init.t
zip alignment
deodexed
changed navigation buttons to Android L looks
resided navigation bar
removed vol buttons and screenshot button from navigation bar - screenshot you can make pressing vol - and power at the same time.
battery with percent
bold fonts on system bar - fonts looks better
lower min brightens
microphone gain fix
clock on the middle of the status bar
4 way power menu - ability boot to droidboot, CWM, Hotboot
some changes in Buildprop for performance.
some optimizations in Framework but still very simple.
added. Google services, Google play, YouTube
google keyboard
adblock ( need root )
resolution changer ( need root )
ViPER4Android FX - need root now sound is really good and noisy
Apex launcher
and other things he don't remember
WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier)
Required materials:
- A Teclast X98 Air 3G (obviously), battery sufficiently charged (recommended to be fully charged the battery before starting the process). The tablet will be running Windows 8.1 or in FastBoot mode
- The Android DnX BIOS (or Android BIOS) from here
- Tin last available (this season) Android ROM for the X98 Air 3G: X98_Air3G_(C6J6)-Android4.4.2-V1.10.7z
-The tools of the platform upgrade Intel (Intel Manufacturing Tools). These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
Upgrade Preparation tool (Intel Manufacturing Tools)
- Unzip the computer you use to convert (not tablet), the Android ROM given above.
- Unzip one of the two available sets of tools Intel Manufacturing Tools. Inside the folder, you will find some executables that run in the following order and always with administrator privileges:
iSocUSB-Driver-Setup-xxxexe: At some point during the installation, you will know that you have to connect the X98 with USB cable to the computer to install the NAND drivers. H connection is necessary otherwise you can install to see and shape the NAND memory of tablet.
IntelAndroidDrvSetupx.xxexe: We run this installer as an administrator with the tablet plugged in USB. This will install the ADB driver Intel, which appears in the Device Manager (Device Manager) for Windows. (See the picture Figure_1)
ManufacturingFlashTool_Setup_x.xxexe: This tool is used in the final planning "name" (branding) of the tablet and install the fastboot kernel. Install with administrator rights on the proposed application folder (hold down the name of the file for the next step).
- Upon completion of the installation of the Intel Manufacturing Tool, copy the file "CUSTOM_CONFIG.INI" into the folder that the tool was installed (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
The function is said to be installed and functional guest running on X98 Air 3G, host.
Once the installation of the guest operating, it becomes host to the tablet and just run it.
Not supported - for now - the simultaneous execution of Android & Windows.
Remove the microSD card that you probably have the tablet, before initiation.
From Windows host -> Android guest (conversion to Android tablet)
- Unzip the Android DnX BIOS directly into the Windows installation on X98 Air 3G.
- Run with administrative rights (from command line) flash.bat file inside the folder BIOS_X98_Air_3G_android. H process starts with the completion of the installation DnX BIOS displays the message "FPT Operation Passed".
- Turn off the tablet holding the POWER button for 10 seconds.
- Run Intel Manufacturing Tool as administrator.
- On the tablet, hold the VOL +, VOL- and POWER until you see the logo of the Teclast. The tablet will be "stuck" there, is perfectly normal. Connect the tablet to the USB port on your computer, so you will receive the following message: "Entering DnX mode. Waiting for fastboot command..."
- In the Device Manager of Windows (Device Manager), find the Android ADB Interface and right-click -> Properties (Properties). In the window that appears, go to the Details (Details) and there in the drop-down menu choose the Hardware ID (Hardware IDs). Our interest rates VID and PID, as shown in the picture Figure_2.
Transfer the VID and PID values in the respective fields of Manufacturing Tool, section SoC Devices.
- Disables the tablet holding the POWER button for 10 seconds and disconnect the USB.
- We keep the tablet down the VOL- and POWER to enter the mode droidboot. Once this happens, connect the USB cable again, go to the Device Manager Windows (Device Manager) and - as before - we find the values of the PID & VID Android ADB Interface (values are different from the previous Figure_3
Transfer prices PID & VID Manufacturing Tool in their respective fields of unity "Android devices", so o Dialogue Manufacturing Tool will be something like shown in the picture. Press "Apply" and "OK" to save the parameters. Close the application.
- Disconnect the USB cable from the tablet and disable.
- Xanatrechoume the Intel Manufacturing Tool as managers and go to the menu File -> Open. There, choose the folder of ROM (X98_Air_3G_ (C6J6)), find the file "flash.xml" and open it.
- We keep the tablet down the VOL +, VOL- and POWER in order to display the logo of running Teclast DnX, connect the USB cable and Intel Manufacturing Tool begins the process of flashing Android ROM. Wait until the process is complete, disconnect the tablet from the USB and disable the X98 Air 3G.
The conversion process in Android tablet has been completed.
3D GAMES FREEZES FIX (thanks to Akitoyo and acc007)You can download the patch from here: patch for 3D games freezes
Then follow these steps:
1. Copy the update.zip to the root path of internal storage
2. Click OTA icon, then choose local update
3. Choose update.zip file then apply it, system will reboot automatically
4. There will be a new icon "Fastmode" on the desktop, choose it before launching large 3D games.
You must click it again if you reboot the tablet then play 3D games
If you haven't Teclast OTA app you can download it from here: Teclast update tool
If you want can find the apk attached to this post (fastmode.apk).
If you don't want use apk, use adb shell and then su to become root.Then launch these commands:
Code:
echo 400 >/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhz
echo 400 >/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_max_freq_mhz
If you want a persistent fix, also after reboot you can create new file install-recovery-2.sh file and put it in ./etc folder with these istructions:
Code:
#!/system/bin/sh
echo 400 >/sys/class/drm/card0/gt_min_freq_mhz
echo 400 >/sys/class/drm/card0/gt_max_freq_mhz
Remember remount /system as rw and chmod this neely created file to 755. You can then execute it or restart to have it automatically started.
For more detailed tutorial look here : jcespi2005's tutorial
GOOGLE PLAY STORE FIX (thanks to Frontier and Hendrickson)Anyone having issues with Google Play Store - this applies to both Air 3G with the latest 2.0.1 update (will post more information later) and Air II - please apply this fix.
Your OS should be rooted in order for this to work.
- Download the files from here.
- Follow this Hendrickson's Videotutorial
TECLAST X98 AIR 3G ANDROID KITKAT 4.4.4 ROM(OFFICIAL) v2.0.0 (thanks to Frontier)Download the upgrade from here.
You also need the Intel Manufacturing Tools (get them from here).
After installing this ROM upgrade, you need to apply the Google Play store fix (links and instructions just above).
The procedure to install this ROM is described above in this post. Just ignore the part that describes how to flash the Android BIOS to the tablet, as it is not needed in this case.
This upgrade will erase all data in the internal flash storage (32GB), so make sure you have a recent backup for your applications.
This ROM is OTA safe, after installation the Teclast Software Updater will notify you for an updated ROM; install the update (it's quite small) so the final ROM version would be v2.0.1_20141505 (see Teclast_X98_Air_3G_Android_4_4_4.png).
Visible changes:
- Intel Firmware Updater Tool inside the Android system; you can use it to flash .bin files directly to the tablet within Android (dual-boot system).
- Google Play Store enhancements; I can install applications now that I couldn't with 4.4.2 release (e.g Google+, Paypal and various e-Banking apps).
- A (little) faster boot.
MICROPHONE GAIN FIX FOR ANDROID 4.4.4 (thanks to Frontier)Here is the final version of the microphone gain fix.
Tests done:
- Voice recognition using Google Now and Google voice typing (even in Greek) works as good as on my OnePlus One with CM11s 44R
- GSM/3G voice calls are clear (I am using Wind GSM network) both with the built-in microphone and via Bluetooth headset (Samsung WEP210).
- Skype voice/video calls are clear, both with internal microphone and the Bluetooth headset.
Connect the tablet with USB cable to a PC with android debug bridge installed.
The tablet needs to have USB debugging enabled.
Open shell and cd to the location of new audio configuration file.
On a PC shell write:
adb root
adb remount
adb push AudioConfigurableDomains.xml /system/etc/parameter-framework/Settings/Audio
adb shell
In the adb shell write:
cd /system/etc/parameter-framework/Settings/Audio
chmod 644 AudioConfigurableDomains.xml
reboot
Done !
XPOSED ON 4.4.4 (thanks to majkel_94)Ok guys, thanks to @jcespi2005 for Xposed ASUS mod which steer me to the correct solution in xda topic for Xposed
So here it is:
Downolad Xposed Installer (2.6.1 has been tested, modules working ok), install it but don't launch the app or install framework.
Download Root Browser, install and open it.
In root browser:
go to the /data/data/de.robv.android.xposed.installer/ and create folder "conf" (permissions rwxrwxrwx)
in folder "conf" create the file "jit_reset_offset" (permissions rw-r--r--)
Download Terminal Emulator, install and open it. Then:
type "su"
type "echo 0x98 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset"
Reboot the tablet.
Open Xposed Installer, install framework, reboot.
Profit! You have working the latest Xposed and working KK Gravitybox!
Remember: You can disable xposed at boot by repeatedly pushing a hardware button as the tablet begins to boot. For example you can use Vol + button.
HOW TO UNPACK AND PACK framework-res.apk CORRECTLY (thanks to mirek190)Follow these instructions. mirek190's tutorial
ITALIAN TUTORIAL FOR UPDATE TO STOCK ROM FROM CUSTOM SELLER ROM (thanks to topdigamma.it)topdigamma.it Tutorial
DUAL BOOT FAQ + HARDWARE AND LOW LEVEL FIXING
FAQ
1)Q: While in Intel Manufacturing Tools and trying to flash, the progress bar is stuck at X%
The flash tool does not like funny characters ,should clear up some confusion as to why things aren't working.So before to flash please try removing the chinese characters from the file name. It screwed you up on something else having chinese in the name.
At 0%: Well, reconnect your device again, check your VID and PID values in settings, check if your drivers are properly installed, replace a cable if it is faulty, check that you're in DNX mode, basically, the flashing didn't even start.
If you have the right pid/vid from the device manager,unplug the device, close the app and restart it, select the flash.xml (should say ready to flash) then plug the device in while in DnX mode and it should begin.
At 5%: Mostly due to the fact that "Custom_config.ini" was not copied to the IMT directory, or there are some other programs that is blocking the progress, try changing a computer and flash again.
At 10 or 11%: Mostly due to wrong settings or parameters, check Device Manager in Windows for any missing drivers, check that the downloaded ROM is not damaged, or that the tablet is not already bricked. Also, this software is very sensitive to the USB port that it was first installed on, so try plugging it back to the same USB port that you plugged it during the install process. (Yes, you have to plug the device in during the install process, if you missed this out, uninstall all the drivers and redo the installation properly).Sometime help to try a different ROM, just to clarify you have copied the "custom_config" file to the Intel Manufacturer Tool folder right. It should get to 10% for about 5-10 seconds then make a disconnection sound and suddenly jump to 15% and continue.
At 89 or 90%: The files written at this stage are larger, so it might take a while longer, but if it is really stuck here, probably the USB cable is faulty. Replacing a cable and flashing again should solve the problem, or just simply leave the tablet and cables still (do not move them around) and try again.
If the flash freezes at 90% a solution could to be increase the timeout values in the program facturing flash tool.
At any other points: Might be due to faulty cables, or simply just try again!
2) Q: I flashed android bios, now I can not get in to droidboot mode by pressing Vol + and POWER. The tablet always gets into EFI shell command interface. I can only get to DnX mode by pressing VOL+ , VOL- and POWER. Any solutions?
A: Follow this steps valid for C6J6 and C8J7 model :
Open Intel manufacturing tools,then open file menu and go to the settings.
Put this value to SoC Devices: VID: 8087 PID:0A65
Put this value to Androird Device: VID: 8087 PID: 09EF
Click on apply and then on ok.
Disconnect the USB cable from the tablet and turn off your tablet (important)
Download the Android 4.4.4 ROM for C6J6 and C8J7 by supercows (link above)
Then in Intel Manufacturing Tool and go to the menu File -> Open. There, choose the folder of X98 Air 3G (C8J7.C6J6) lite 4Gb or 8GB and choice "flash.xml" for your device 4Gb or 8GB and open it.
Keep pressed VOL +, VOL- and POWER button until the tablet go to the dnx mode
Connect the USB cable and Intel Manufacturing Tool begins the process of flashing Android ROM.
Wait until the process is complete.
Disconnect the tablet from the USB and and turn off your tablet .
Connect the usb keyboard to the tablet and turn on your tablet, you could get shell command error again
Just type exit and you see the tablet go to the android version
When go to the android you must change your bios with ifwiupdate and you can flash dualboot bios or new android bios from first post
3) Q: I have problems getting into Android from the dual boot menu! Windows is okay.
A: If there are any problems getting into Android from the dual boot menu, change this option in the BIOS. Change "Boot Architecture" to "OS Boot Menu Only".
View attachment 3048901
4) Q: After shutting down the table in Windows, it takes very long before I can power it on again.
A: Turn off "Fast Startup" option in Windows Power Options. Another way is to navigate to "C:\Windows\System32", find "SlidetoShutDown.exe" and use that to shut down.
5) Q: The time in Android and Windows is not synchronised!
A: Go to "Run", type in "regedit", then navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation
Add in a new REG_DWORD, "RealTimeIsUniversal" and set its value to 1
6) Q: I plugged the tablet into the charger and it shows as charging but after a while I noticed that the battery percentage dropped!
A: Check the cable, it should be of good quality and as short as possible. Original teclast cable is good, not too long and thick enough. Best to use short cable of 5cm. This is due to high current and low voltage of the tablet.
7) Q: I'm on Android 4.4.2 and this tutorial needs me to upgrade to 4.4.4. How
A: Go to post #2, download the 4.4.4 ROM from there, start by following the tutorial from the line "WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier)" onwards all the way until you reach GOOGLE PLAY STORE FIX (thanks to Frontier). If you see the line "From Windows host -> Android guest (conversion to Android tablet)" in the tutorial, do not worry, because this process is used for both purposes, from Android to Android or Windows to Android, both are applicable.
8) Q: I flashed my tablet to dual boot OS already, but now I want to reinstall only one OS! How can I do it without having to reinstall everything?
A: If you want to reinstall Android only (leaving Windows unharmed):
One way is to flash just "system.img" through the Intel Manufacturing Tools (try this way first).
Download from here the zip named "ONLY FLASH system.img": http://1drv.ms/1s8dci8
Replace the "flash.xml" in your ROM folder with the one in this version.
Then flash as per normal using IMT.
This "flash.xml" will instruct the IMT to flash only the "system.img" file which is Android OS.
If that doesn't work, we will try flashing all components of the ROM without re-partitioning the whole eMMC,
Download from here the zip named "ONLY FLASH ANDROID PARTITIONS": http://1drv.ms/1s8dci8
Replace the "flash.xml" in your ROM folder with the one in this version.
Then flash as per normal using IMT.
If you want to reinstall Windows only (leaving Android unharmed):
Prepare your USB Drive with the Windows image.
Boot into Windows first, then restart and plug in the OTG cable, USB HUB, keyboard, and USB Drive.
Enter BIOS by pressing "ESC" key during boot and under the "Save and Exit" menu, scroll down to the "Boot Override" option, find the USB drive and select it to boot from it. The BIOS restart the tablet and will boot into the USB Drive so Windows install should start.
Remember the USB bootable stick must be created with Fat32 file system and GPT table partitioning.
9) Q: Help! My touchscreen is inverted!
A: (Thanks to @krisbliz):
Download the files from @krisbliz post here, and copy the files into C:\Windows
now run gpedit.msc
computer configuration
scripts (startup/shutdown)
startup
add
browse for reset driver.bat
10) Q: How to reinstall windows without reinstall android ? I cannot change the language and even updates from winddows update,every time when I put usb prepared and trying to install windows it working installation and after 65% shows installation error 0xc1440137 0x2000c and going back to previous instal (chinese) to windows
A: (Thanks to @mohamad_skiller):
Connect usb keyboard and usb windows instalition to your hub then
Enter BIOS by pressing "ESC" key during boot and under the "Save and Exit" menu, scroll down to the "Boot Override" option, find the USB drive and select it to boot from it.
The BIOS will boot into the USB Drive and Windows install should start.
11) Q: I have installed dualboot bios with a success. When I plug in usb to install the IntelAndroidDrvSetup1.5.0.exe, in the boot menu I can see a Windows in the right center of screen and in the right top corner two small icons of android and windows which I can check. I dont see Android logo in the center of screen?
A: (Thanks to @jcespi2005):
Sounds you install windows on top of android partitions.So check what partitions do you have in windows partition manager...If you deleted the android ones, you'll need to start over starting installing android again.
In any case, make sure you've followed these steps correctly:
blackman818's tutorial
12) Q: Why Microsoft Store doesnt work?
A: (Thanks to @Hendrickson ):
Run the troubleshooter (Search and type trouble shooter) And run it for the Store, this should re-install the drivers
13) Q: Why camera doesnt shows anything (the screen turns black and i have to exit to desktop)?
A: (Thanks to @Hendrickson ):
Reinstall the camera.inf and OV and GS camera drivers from the Air 3G drivers
14) Q: I can't use touchsceen and also screen rotation is not working. During installation , Windows stopped at language selection ,i had to connect usb moude and keyboard to make selection, is this normal?
A: (Thanks to @25gee ):
Yes,continue the installation and use drivers zip on the first page.Install the driver under gyroscope and run the registry file.Go into device manager,find the unknown device,install drivers and point manually to the drivers folder (it will install but fail to enable,this is normal) from here simply right click on the display,disable it and reenable, you can do the same with the 2 I/O devices for the orientation and accelerometer to fix the inverted screen rotation
15) Q: I partitioned my 32 GB SD card and formatted the smaller partition EXT4. Link2SD recognized the partition but it "fails to create MOUNT SCRIPT.
A: (Thanks to @kinhvanhoa ):
Probably you forgot to format your EXT4 partition on the SD CARD as "PRIMARY PARTITION."
Please make sure the EXT4 Partition which should be smaller than FAT32 partition, must be set as "PRIMARY" (FAT 32 as well).
Then, use LINK2SD on the Rooted Android, it works fine and allows apps to be moved to the EXT4 partition on the SD card.
16) Q: How can i change the intel turbo mode on to off? How can i enter in the bios mode? Only few games works, others freeze!.
A: (Thanks to @SUMMERBREEZE ):
Find an USB keyboard first and plug OTG cable to the tablet and turn it off. Turn the tablet on and immediately press ESC button. And follow the images (bios_1 and bios_2) i attached and do the settings carefuly. f4 save & exit
17) Q: I have problem with the dual boot bios, now I don't arrive any more to the page where there are the icons of the Android and Window (that I never saw it). Please could anybody known what happens, I am stacked on the installation of windows?
A: (Thanks to @grigoris_a ):
From switched off press power button once to boot and keep holding vol up key pressed
18) Q: I have installed dualboot bios with a success. The icon of windows is not showed,why?
A: (Thanks to @grigoris_a):
If you don't see windows icon it means the USB is not bootable.Try getting into bios and see if the USB drive is detected and check the file system on your windows usb drive it should be FAT32. Often the problem is inside the bios, maybe is enabled the options the EFI format on the boot option, disabled it the icon of windows appears and then you can started the installation.
18) Q: I start from Windows 8.1 then I installed the Dual Boot Bios (No problem).
I restart to the bios, power down the tablet and power up again and use the Windows 8.1 again (without reinstall anything) with 60hz. Everything perfect but... right now I cant install android because my tablet is not recognize by the PC I power off by pressing 10 seconds the power button. Then while its connected I power it up and shows the battery meter but the PC dont do anything so I cant use any program to flash android, any idea? I tried different cables and nothing
A: (Thanks to @Petepe10):
This is the normal way, do not know about dualboot though: Power up (vol up down power press) until screen shows dnx mode, and then connect cable. Flash starts automatically (provided pc is ready to flash of course)
19) Q: How to switch from an OS to another?
A: (Thanks to @BPM):
Power off the device and then press and hold vol+ and power until you see the bootmenu
20) Q: On the lockscreen in Windows the text in the lower right corner is chinese.
Sometimes there pops up chinese messages in the infobar (lower right corner in windows - left to the clock).How can i remove this?
A: (Thanks to @smartchip):
On Control panel : Clock, Language and Region : Language : Change date, time or number formats. On Formats tab - Match Windows display language (should be default). On Location tab - change "Home location" to get your Start Menu tiles to load news, recipes, etc from your country (open the apps when you're done and refresh). On Administrative tab - "Welcome screen and new user accounts" click "Copy settings", apply to all.
21) Q: I have teclast x98 air 3g dualboot version but accidentaly i touch in corner to swich off choosing the system, now i have only android.How ca I return to dual boot menu?
A: (Thanks to @smartchip):
Hold power + volume up to power on. You'll get the menu back
22) Q: On Windows is there any way to hibernate the tablet? I try to hibernate but doesnt works well,the tablets power off but you have to press power button for 10s to power it up again, and you start windows normally?
A: (Thanks to @seba2000):
Make a shortcut on your desktop to C:\Windows\System32\rundll32.exe PowrProf.dll, SetSuspendState Hibernate
and save it as "Hibernate" for instance.You can pin it to start as well.When you will run this shurtcut tablet will hibernate. Remember that after you will run this command (shortcut) you need to wait a bit before you will be able to switch on again (10-15 sec) . Do not try to switch on immediately - Windows needs time to dump all data from RAM to hard disk (need time to hibernate). In this tablet there is missing any led which show disk activity so you just need be patient.
After 10-15 sec you will be able to switch on by single power button press.
If you want add hibernate and sleep option in Windows, follow the vpx tutorial
23) Q:Why there is one hour difference between android and windows ?
A: (Thanks to @G3n3R4L):
Hit Start and type regedit.exe in the search box. Hit Enter and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\TimeZoneInformation. Right click anywhere in the right pane and hit New > DWORD (32-bit) Value. Name it RealTimeIsUniversal, then double click on it and give it a value of 1.
and done, time in windows is exactly the same as android under the correct time zone.
If you want to do these steps automatically you can use this reg file: abanglek's X98DualClockFix.zip
25) Q:Windows only reporting 1 battery cell, battery gets stuck at 7% for a few hours as mentioned previously here. Did anyone manage to fix the issue in Windows?
A: (Thanks to @grigoris_a):
1.Fully charge the tablet
2 Run cmd as admin and paste this command
powercfg-setdcvalueindex SCHEME_CURRENT SUB_BATTERY BATACTIONCRIT 0
3 Use the tablet until it shuts down
4 Charge the tablet without pushing power button until it charges fully.(let it overnight)
24) Q:Why I can't enter in fastboot mode?
A: (Thanks to @jcespi2005):
Just power off (press power off for 10 seconds), wait some time, 5 minutes, and press VOL+ VOL- and then power on until fastmode shows on the tablet. When you connect the tablet on fastmode, the Manufacturing tool just boot a droidmode image like this:
01/14/15 00:14:29.870 INFO : Port 0/0/4 #0: Booting droidboot image - SN : Baytrail00005B06
01/14/15 00:14:32.914 INFO : Port 0/0/4 #0: Booting to droidboot.img success - SN : Baytrail00005B06
25) Q: The brightness auto dimming up and down by itself. But This tablet no light sensor and cannot enable/disabled auto brightness.
A: (Thanks to @melvincz):
Go to the Intel Graphics settings utility (find it in the tray), choose Power section and disable all energy savings functionality. That will fix the auto-dimming issue.
That's all! ENJOY! If there are any questions feel free to post in the forum. Thanks!
HARDWARE AND LOW LEVEL FIXING
FLASH BIOS WITH THE USB PROGRAMMER AND CLIP (thanks to Hendrickson)
You can follow the tutorial here:
Russian Tutorial
The clip took a few goes to connect and it finally do when you hear the windows beep beep that new hardware is detected. Flashed and verified and boots fine. Windows 8.1 installed the drivers itself. You don't need to install them.
Some tips, I did it with the battery connected and fully charged. I used the 25xx slot on the usb programmer and the clip #1 is the colored cable of the 8. #1 on the clip to the . connector on the winbond chip itself.
Flashing took around a minute its quick.
DISPLAY BRIGHTNESS THROTTLING (thanks to Petepe10)
I think I found a way to prevent that the display is heavily dimmed due to a thermal event. It is in thermal_throttle_config.xml in system/etc. My interpretation is that by the mod below the brightness reduction is not immediately to 40 percent but goes down in steps to 80 60 40. Wouldn't you agree? I have not found the trigger settings yet though. The xml is editable (I use total commander), reboot afterwards. I will test some more. Of course such thermal mods are not without risk, so be warned..
Code:
<!--Cooling Devices-->
<ContributingDeviceInfo>
<CDeviceName>Display</CDeviceName>
<CDeviceID>1</CDeviceID>
<CDeviceClassPath>com.android.server.thermal.Brigh tnessControl</CDeviceClassPath>
<CDeviceThrottlePath>none</CDeviceThrottlePath>
<ThrottleValues>
<!--ThrottleNormal>100</ThrottleNormal-->
<!--ThrottleWarning>40</ThrottleWarning-->
<!--ThrottleAlert>40</ThrottleAlert-->
<!--ThrottleCritical>40</ThrottleCritical-->
<ThrottleNormal>100</ThrottleNormal>
<ThrottleWarning>80</ThrottleWarning>
<ThrottleAlert>60</ThrottleAlert>
<ThrottleCritical>40</ThrottleCritical>
</ThrottleValues>
</ContributingDeviceInfo>
FIX EMMC (thanks to stachoo777)
You can follow the tutorial here:
stachoo777 Tutorial
Be aware of broken droidboot mode when updating to newest ifwi bios for c6j6. One hint for this is that efi shell is like dos so if you want to go to USB just type "fs1:"
FIX PROBLEMS OF HEAT DISSIPATION (thanks to acc007)
acc007 Tutorial
FIX HEADSET PROBLEM(thanks to Hendrickson )
If with music, it sounds like it's being played through a tunnel, or been compressed down to something like 8kbps. The main instrument tracks usually sound fine, but the vocal track is heavily muted and in some tracks practically inaudible; it's also tinny and a bit distorted.
It's not defective, it's a Iphone style jack, if you don't fully insert your 3.5 plug it will sound normal. Or use a headphone without a mic or a converter like this one: http://www.ebay.com/itm/301385140519?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
WINDOWS DEVELOPMENT
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested for the model C6J6
WINDOWS 8.1 PRO ISO
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
WINDOWS 8.1 WITH BING (Teclast beta version - no driver nedeed)
https://drive.google.com/folderview...&usp=sharing&tid=0BzgIeN_XB6mlUmFieDdxa3JkUHc
WINDOWS 8.1 LANGUAGE PACK
https://social.technet.microsoft.co...uage-pack-for-windows-81?forum=w8itprogeneral
WINDOWS 8/8.1 TECLAST COMPONENTS DRIVER
https://mega.co.nz/#!tJdHCIAT!agSun8Wa1tOx_3tL8YMuS19j1i5wWG2WUJPprmTbTCs
ADB DRIVER
https://mega.co.nz/#!3JshGCLB!6ldn4tPJZlZtDvlR17pmxhqxkrDs4OxxyCJhIHyhZ-4
Note: The camera driver not work correctlly on Windows 8.1, after OS installation it's necessary to install ManyCam Pro to get a satisfactory use of the camera
ANDROID => WINDOWS 8.1 PROCEDURE (thanks to Frontier)
Required materials:
- A USB stick of 256MB (generally small), FAT32 configuration with label (label) WINPE (uppercase).
- A USB stick capacity of at least 8GB, formatted system NTFS. This will pass the installation files Windows 8.1.
- A USB hub to connect these two sticks in OTG cable X98 Air 3G. The hub would be good to have its own power supply.
- A Teclast X98 Air 3G (obviously), battery sufficiently charged (recommended to be fully charged the battery before you start the process).
Preparing USB sticks:
- Unzip the file WinPE_User_20140814.7z and copy all files directly on the root directory of the USB stick WINPE. See the picture Figure_1.
- Unzip the installation files for Windows 8.1 DVD into a folder named "images", which should be on the root directory of the USB stick of 8GB (with NTFS configuration). The Windows 8.1 version with Bing for X98 Air 3G is here (5 files total): Part1 , Part2 , Part3 , Part4 , Part5 . Inside the folder images, you need to have the files install.txt, install.wim, UnattendAudit.xml, UnattendUser.xml, WIMPART.TXT, Winre.wim. If you want to use your own image and make the USB stick with a tool (Rufus, etc), drivers for the Windows X98 Air 3G is here . If you use Rufus remember to use MBR for UEFI, not GPT!.
See the picture Figure_2
Preparation of material:
- X98 Air 3G enabled USB debugging in the settings.
- On the PC, will be available the tool adb (part of the platform SDK) and have installed the ADB drivers (adbdriver.com). The PC should recognize the X98 Air 3G before starting the procedure.
- It is recommended to install Intel Manufacturing Tools before turning the tablet on Windows tablet, in order to be able to restore it to operating condition if the procedure fails. These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
Upgrade Preparation tool (Intel Manufacturing Tools)
- Unzip the computer you use to convert (not tablet), the Android ROM given above.
- Unzip one of the two available sets of tools Intel Manufacturing Tools. Inside the folder, you will find some executables that run in the following order and always with administrator privileges:
iSocUSB-Driver-Setup-xxxexe: At some point during the installation, you will know that you have to connect the X98 with USB cable to the computer to install the NAND drivers. H connection is necessary otherwise you can install to see and shape the NAND memory of tablet.
IntelAndroidDrvSetupx.xxexe: We run this installer as an administrator with the tablet plugged in USB. This will install the ADB driver Intel, which appears in the Device Manager (Device Manager) for Windows.
ManufacturingFlashTool_Setup_x.xxexe: This tool is used in the final planning "name" (branding) of the tablet and install the fastboot kernel. Install with administrator rights on the proposed application folder (hold down the name of the file for the next step).
- Upon completion of the installation of the Intel Manufacturing Tool, copy the file "CUSTOM_CONFIG.INI" into the folder that the tool was installed (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
The function is said to be installed and the guest OS you are running on X98 Air 3G, host.
Once the installation of the guest operating, it is now host to the tablet and just run it.
Not supported - for now - the simultaneous execution of Android & Windows.
Remove the microSD card that you probably have the tablet, before initiation.
From Android host -> Windows guest (conversion to Windows tablet)
- Uncompress file BIOS_X98_Air_3G_android_to_windows.7z folder without spaces in the name (eg C: \ Temp). We should be inside the unzipped folder, a subfolder 'fpt-tools-package'.
- Connect the tablet to the PC and wait (in Windows) to recognize.
- If you have rooted your device,from a command prompt (with administrator rights), we give the following commands:
adb push c:\temp\fpt-tools-package data/local/tmp/
adb shell
cd data/local/tmp
chmod 0777 FPT
su
./FPT -F X98Air3G.bin
- If you have not rooted your device,from a command prompt (with administrator rights), we give the following commands:
adb push c:\temp\fpt-tools-package data/local/tmp/
adb root
adb shell
cd data/local/tmp
chmod 0777 FPT
./FPT -F X98Air3G.bin
- Once the execution of the last command and display the message "FPT Operation Passed", disable the tablet holding and hold POWER. See the picture Figure_3.
- Connect the two USB sticks in USB hub and the hub of the OTG port X98 Air 3G. Activating the X98 Air 3G with the POWER button, and automatically starts the installation process of Windows 8.1. The whole process takes a long time - and for this reason it is recommended that you fully charged the battery - and requires no user intervention. See the picture Figure_4.
If you do not automatically start the process, connect a USB keyboard to the hub, then reset the tablet (CTRL-ALT-DEL or off) and after doing reset, enter the UEFI BIOS by pressing DEL. At the boot menu, go to the Boot Override option and press ENTER on the USB stick (small in size) to do boot from there. See the picture Figure_5.
- When the message "WIMboot image deployment COMPLETE. Type EXIT from command prompt to restart or turn off the device." You can disconnect the USB hub and terminate the tablet. See the picture Figure_6.
The process of converting the X98 Air 3G in Windows tablet, complete!
After the Android to Windows conversion is it recommended first install the Gsensor, run the kxaccel-win8-x86-dbg-intel.exe that comes in the folder GSENSOR in the attached zip in and then execute the reg file.
Finally copy the TouchSetting.gt to C:\Windows\inf folder and reboot.
Everything should go smoothly now.
For the Italian friends I have prepared a simplified guide in Italian pdf.
CHINESE TOOL FOR CLEAN WINDOWS FOLDER AND FREE MORE SPACE (thanks to BoORDeL and keepfishes)
The zipped file is attached to this post (Windows_Cleaner.zip).
Execute the exe and click on button showed in Figure_7.
You will see a list of folder that can be cleaned (if this doesn't happen change permissions on your windows folder : http://tipsandtricksforum.com/thread-223.html )
Than select the checkbox near folders name and let the program clean them by pressing button as shown in the Figure_8
INVERTED CAMERA FIX (thanks to ro11er and Hendrickson)
You can downlad the fix from this url:
Inverted Camera FIX
You need to uninstall these three devices and reboot:
Kionix KXCJ9 Accelerometer SPB
Goodix Touch HID
Intel Graphics
Then after reboot install in this order from the attachment download in above link.
Intel Graphics
Goodix Touch
kxaccel-win8-x86-dbg-intel.exe and registry
Once registry entry is done and reboot monitor will be reversed. You must change registry to this value: 01 00 00 01 01 00 02
Very important: Do not do video drivers update or u will loose all your configuration!
UPDATED WIRELESS AND BLUETOOTH DRIVERS (thanks to Hendrickson)If you have problems with wireless when using bluetooth at the same time it was so damn slow, you can use updated bluetooth and Wireless drivers attached to this post ( Air_3G_Updated_WLAN_and_BT_drivers.zip).
These drivers were discovered November 4th from Dell site and seems to have fixed the issue.
TUTORIAL FOR DOWNLOAD WINDOWS METRO APP WITH IDM (thanks to mohamad_skiller)For read tutorial click here: Mohamad_skiller's tutorial
BATTERY PROBLEM FIX (thanks to puzdar )For read tutorial click here: puzdar's tutorial
HOW TO CHANGE LANGUAGE FROM CHINESE (thanks to Hendrickson )For see the tutorial click here: Hendrickson's tutorial
DUAL BOOT DEVELOPMENT
TUTORIAL VIDEOS
Hendrickson's complete Tutorial
This tutorial cover:
intel mfg tools installation
drivers
flashing
partitions
making a bootable usb drive
windows installation
windows drivers + fixes installation
DEMO VIDEOS
supercowz's Teclast X98 air 3G dual boot
UPGRADE FLOW PROCESS SCHEME(thanks to Petepe10)
upgrade flow process scheme
LAST BIOS
Be very carefull, you could brick your tablet if you use a version of bios not in conformity with your tablet model.I take absolutely no responsibility for damage caused by the flash of the following bios.
C9J8 ( Warning, the tablet could became instable with random rebooting and even if you turned it off you have to wait 2 min to power it again)
mirek190 modified C9J8 bios
AIR II DUAL (compatible with C6J6)
grigoris_a AIR II DUAL bios
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested on C6J6 only. For C8J7, there are some additional pointers along the way, do look out. All files in this tutorial are by default for C6J6, unless otherwise stated. Is highly recommend reading through the whole post first before touching your tablet to prevent errors, or worse, bricking the whole thing
Install dual boot(C6J6) - KEEPFISHES TUTORIAL (thanks to supercowz, mohamad_skiller, ro11er and Frontier)
Please before you begin to read this tutorial is better to watch the Hendrickson's complete Tutorial video that show and explain all the needed steps for dual boot implementation.
The original post of keepfishes is here. in case he make some updates and it is not shown in this post
I found that the tutorial on the first page lacked detail and some steps were not shown clearly, so I made a new one that I think is easier to follow for newcomers! Will add screenshots soon.
Dual boot BIOS benefits:
Fixes 60Hz refresh rate for Windows 32 bit system
Probably on old bios there are low voltage settings for GPU that makes some problems with 3D games,after updated to dual bios no problems at all for many users
Drawbacks:
BIOS settings very little
No boot menu (so no easy way to reinstall Windows with a USB drive)
Time in Windows will mess up when using dual OS
The flashing process is roughly as such:
Click image for larger version
View attachment 3050134
Many of us have different start points, some are coming from Android, some from Windows, but it does not matter. First thing is to flash with dual boot BIOS, which is most important.
WARNING: (Be very careful, this part may brick your device. After you get past here, you can practically do anything you want and there is almost no risk of bricking your device, so pay attention here!)
Get dual boot BIOS files here (both C6J6 and C8J7): http://pan.baidu.com/s/1sjK4Zbn
View attachment 3048864
Extract the BIOS "完美双系统BIOS.7z" and copy the contents to the tablet.
Note the filepath on the tablet, you will need it later.
1a) Flash BIOS from existing Android system
NOTE:
If your existing Android version is 4.4.4, you can use the "UpdateIFWI.apk" that was installed on the system to flash the BIOS.
If Android version is 4.4.2 on C6J6 and there is an "UpdateIFWI.apk" on it, there have been reports that it does not flash properly. (as reported by @ambrosio5)
Current advice is to update to 4.4.4 before proceeding. .For instructions on how to upgrade to 4.4.4 from other previous Android versions, see FAQ 7 below.
From the tablet itself, run “UpdateIFWI.apk”, select "Browser" and point it to the filepath of the BIOS named "X98Air3GDuala.bin''.
STOP: Make sure you have at least 50% battery and chose the correct file! If this fails, it might BRICK!
Now flash the BIOS.
1b) Flash BIOS from existing Windows system
From the tablet itself, RUN AS ADMIN the .bat file in the folder (the one with chinese words) provided.
View attachment 3048853
After you see the Green line “FPT Operation passed”, it’s good news.
Now reboot the system and you will be taken to the BIOS screen. Just igonore it and press power button for 10 seconds to turn it off.
2) Installing ANDROID first (must be done before Windows)
Now we need to FIRST install ANDROID. This step will wipe out your whole tablet (INCLUDING ALL PREVIOUS WINDOWS AND ANDROID PARTITIONS AND DATA)
ON ANOTHER PC (not tablet), download the Android 4.4.4 Lite ROM here: https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
OR
SUPERCOWZ ANDROID 4.4.4 C6J6 AND C7J8 ROM For Both: https://mega.co.nz/#!zVdgWJyS!Vh7zGqX6NcYgXrCf-5v_qmEReZXuicvGzw6h1u5OnGo
OR
USE ANY OTHER ROM YOU WISH
Download this modified "partition.tbl" file from the Chinese: http://pan.baidu.com/s/1qWnxc4G
Inside are two folders, the 5000 one is 5GB Android space, the 8000 one is 8GB Android space. I personally used 5GB, because I want to leave more space for Windows.
View attachment 3048857
Download and install Notepad++, we need to edit "partition.tbl" file below, the Notepad.exe and Wordpad.exe built in on Windows DOES NOT SAVE THE FILE CORRECTLY AND WILL NOT WORK!
Extract the contents of the ROM to a folder. You should see a "partition.tbl" file inside.
This file controls how the 32GB eMMC in the tablet will be partitioned in this step.
View attachment 3048867
Copy the "partition.tbl" file FROM the Chinese download (either 5000 or 8000) TO the Android ROM folder that you extracted. Replace the original "partition.tbl" file that came with the ROM.
Edit the "partition.tbl" file in the Android ROM folder, find the second last line, which is "add -b 5931048 -s 10240000 -t data -u 80868086-8086-8086-8086-000000000008 -l data -T 0 -P 0 /dev/block/mmcblk0"
and change the highlighted number to the value of user space you want in Android. The number is a multiple of 2048, so let's say if I want 500MB user space, I would have to multiply 500MB x 2048 = 1024000 and input "1024000".
View attachment 3048872
I tried 300MB but it was too small, I think 500MB would be good if you're planning to use more Windows. Save the file!
Credits to FRONTIER for Android ROM flashing instructions (I made a number of changes):
The tools of the platform upgrade Intel (Intel Manufacturing Tools). These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
- Unzip the downloaded Intel Manufacturing Tools. Inside the folder, you will find some executables. RUN THEM IN THE FOLLOWING ORDER WITH ADMIN RIGHTS:
iSocUSB-Driver-Setup-xxxexe: During the installation, DO NOT PLUG IN YOUR TABLET. Near the end of the install, there will be a text asking saying that you need to plug in tablet and power cycle to complete installation. ONLY PLUG IN YOUR TABLET THEN, and do as the instruction says. After you're done, click Finish. After install, you should see Intel SOC device in your device manager.
IntelAndroidDrvSetupx.xxexe: Plug in your tablet, and MAKE SURE that your computer RECOGNISES your tablet. You will see unknown ADB device if you plug in the tablet. Now run this program as ADMIN, this will install the ADB driver for the unknown device. In device manager, if it still shows unknown device after install, manually update the driver in device manager and browse to the install directory of the driver, it will then install the driver from there.
ManufacturingFlashTool_Setup_x.xxexe: Install with ADMIN rights, this will install the Flash tool with the Lightning icon, which is the GUI interface we use to flash our tablet.
Copy the file "CUSTOM_CONFIG.INI" from the downloaded folder into the install folder of IMT (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
Remove the microSD card from tablet.
Run Intel Manufacturing Tools (the one with Lightning icon), In the Settings menu, change the VID and PID values to this, then click apply and OK:
If you're using Windows XP, your VID and PID values may be different to the ones shown. Check the instructions on Post #2 on how to get the values.
View attachment 3051023
Close the IMT application and launch it again. Go to the menu File -> Open. There, choose the folder of ROM you want to flash, find the file "flash.xml" and open it. The "flash.xml" file which tells IMT how to flash the tablet's eMMC.
(IF YOU ARE USING SUPERCOWZ Android 4.4.4 C6J6 and C7J8 ROM, here are his instructions, :
flash with ManufacturingFlashTool
for C6J6 open in ManufacturingFlashTool :
flashC6J6-4GB.xml or flashC6J6-8GB.xml
for C8J7 open in ManufacturingFlashTool :
flashC8J7-4GB.xml or flashC8J7-8GB.xml
this last action dedicate 4 or 8 gb of rom space for Android and you can install windows in 18.5 or22.5 gb free rom space.
Then reinstall Android rom as before (open manufacture flash tools and select flash.xml)
After install android rom you can install windows as before (using bootable windows usb disk and select 18.5 or 22.5gb rom free))
-----------------------------------------------------------------------------------------------------------------
8) Turn off the tablet holding the POWER button for 10 seconds.
- Run Intel Manufacturing Tool as administrator.
- On the tablet, hold the VOL +, VOL- and POWER until you see the "Entering DnX mode. Waiting for fastboot command..."
Click image for larger version
View attachment 3048873
- Connect the USB cable to the computer and flashing will start.
- After progress bar is green and 100%, hold down power button for 10 seconds to turn off tablet.
If the progress bar turns red, take note of the percentage that it stopped at, and refer to FAQ 1 below.
Click image for larger version
View attachment 3048876
After finishing these steps, Android is now installed on the tablet, and if you power it up, you can see the dual boot menu with the Android logo.
Click image for larger version
View attachment 3048880
If you're happy with ANDROID only without Windows, you can stop here and just boot into Android! You can go on to do the Google play store fix and others...
3) Installing Windows
If you plug in your USB drive via the OTG cable and boot up, you will see the boot menu with an Android icon and a small Windows icon. (If you don't see the boot menu at all, shut down the tablet and press Vol + and Power button until the boot menu appears).
This small Windows icon is the only way to get the BIOS to boot into your USB drive to install Windows. This dual boot BIOS has no boot menu, and in the BIOS there is no option to select to boot from USB, so this is the only way to boot to a USB drive that I know of so far...
(If you already have a USB stick prepared, skip this section in BLUE)
Preparing your Windows USB Stick:
You can install Windows via the traditional method which involves the GUI (in which case you will need an OTG HUB to plug in the USB Drive and mouse together) OR you can use a downloaded wimboot image (no need for HUB and mouse, just a thumbdrive will do).
Whatever the case, make sure your USB Drive is formatted as FAT32! Very important!
I used this wimboot image that automatically uses WinPE to get through the whole install process automatically without needing a single mouse click, which also has all the drivers and everything installed and working properly:
Waiting for repost on mega...
Link: http://pan.baidu.com/s/1hqIfAle
password: zhec
Extract the downloaded files and then copy all the contents into the root of the USB Drive. NO NEED FOR RUFUS!
If you are not using the above images, and use other Windows ISO or images as found in Page 1 or if you want to make your own images, you will need this software RUFUS:https://rufus.akeo.ie/
Follow tutorial here on creating the USB Drive: http://www.techverse.net/how-to-create-bootable-usb-flash-drive-install-windows-8-1/
Remember to use MBR for UEFI, not GPT!
If your Windows doesn't come with drivers, you can download them from here and install them:
https://mega.co.nz/#!tJdHCIAT!agSun8Wa1tOx_3tL8YMuS19j1i5wWG2WUJPprmTbTCs
Here also a Windows 8.1 PRO version with drivers and English/French language pack (thanks to supercowz):
Win 8.1 PRO with driver and eng/fr language pack
Plug in the USB drive via OTG cable or HUB, and choose the small Windows icon until it turns blue, then hit the grey button below and Windows installation should start.
If it asks you for which partition to install to, you will see a great many partitions there (due to Android), don't worry, it is normal. Typically you will install Windows to the largest available partition. (Unless you set the Android user space partition in the "partition.tbl" file previously to be huge)
DO NOT TOUCH ANY OF THE ANDROID PARTITIONS, IT WILL DESTROY THE ANDROID SYSTEM!
Everything should go smoothly from here and you can remove your OTG cable and USB drive once Windows starts asking for your User Name.
4) Final Steps
One last step. Thanks to Android, we have to hide the Android partitions from Windows, because when we open "This PC", Windows will attempt to mount all the partitions and cause the whole thing to hang.
So, go to control panel, administrative tools, computer management, then Storage, then for each of the RAW partitions that belong to Android, right click and choose "change drive letters" and choose "remove", then OK. Repeat for the rest of the partitions, leaving the C: drive alone. DO NOT DELETE ANY PARTITIONS OR ANDROID WILL NOT WORK!
Note: For people who only want to install Windows and don't want Android but still want the dual boot BIOS (due to the 60Hz refresh rate), I have tried it and it works. What you need to do is to follow this tutorial exactly, but REPLACE STEP 2 WITH THE ONE BELOW:
STEP 2) This step will wipe out your whole tablet (INCLUDING ALL PREVIOUS WINDOWS AND ANDROID PARTITIONS AND DATA)
Yes, even though we are not installing Android, we need this step still:
ON ANOTHER PC (not tablet), download the Android 4.4.4 Lite ROM here: https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
OR
USE ANY OTHER DOWNLOADED ROM AS YOU WISH
Download this modified "partition.tbl" file from the Chinese: http://pan.baidu.com/s/1qWnxc4G
Download and install Notepad++, we need to edit "partition.tbl" file below, the Notepad.exe and Wordpad.exe built in on Windows DOES NOT SAVE THE FILE CORRECTLY AND WILL NOT WORK!
Extract the contents of the ROM to a folder. You should see a "partition.tbl" file inside.
This file controls how the 32GB eMMC in the tablet will be partitioned in this step.
Copy the "partition.tbl" file FROM the Chinese download from the 5000M folder TO the Android ROM folder that you extracted. Replace the original "partition.tbl" file that came with the ROM. Edit the "partition.tbl" file in the Android ROM folder, find the second last line, which is "add -b 5931048 -s 10240000 -t data -u 80868086-8086-8086-8086-000000000008 -l data -T 0 -P 0 /dev/block/mmcblk0"
and change the highlighted number to 2048. Save the file!
Open "flash.xml" with Notepad++.
DELETE this chunk:
<code_group name="system">
<file TYPE="system">
<name>system.img</name>
<version>eng.yankendi</version>
</file>
</code_group>
AND THIS CHUNK BELOW:
<command>
<string>fastboot flash system $system_file</string>
<timeout>420000</timeout>
<retry>2</retry>
<description>Flashing 'system' image.</description>
<mandatory>1</mandatory>
</command>
Then save the file.
Follow the post on the FIRST PAGE HERE, scroll down and start from this part onwards “WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier))” until the end (stop at "GOOGLE PLAY STORE FIX (thanks to Frontier)"). READ BELOW FIRST:
Because we have already done certain steps, we can ignore some parts:
PARTS TO IGNORE:
Under the "Required materials" section
IGNORE: “- The Android DnX BIOS (or Android BIOS) from here “
If you wish, you can use Android 4.4.4 lite ROM in place of the 4.4.2 ROM as proposed here.
Under the "From Windows host -> Android guest (conversion to Android tablet)" section
IGNORE all these: (because we have already flashed BIOS)
- Unzip the Android DnX BIOS directly into the Windows installation on X98 Air 3G.
- Run with administrative rights (from command line) flash.bat file inside the folder BIOS_X98_Air_3G_android. H process starts with the completion of the installation DnX BIOS displays the message "FPT Operation Passed".
After finishing the steps, you can power it up, you can see the dual boot menu option with the Android logo and a very small Windows icon. Continue and follow STEP 3 in the guide. You can partition your 32GB eMMC in the Windows setup to remove all previously created Android partitions and make it into one large Windows partition to install Windows.
For dual boot FAQ click here
INVERTED TOUCH FIX UNDER WINDOWS (thanks to krisbliz)
You can use the DevManView to restart the "Goodix Touch HID" before the windows logon screen and everything working perfect again.
Here are the steps:
Download the file "disable enable touch driver.rar" attached to this post
So first copy the extracted files in Windows dir
Now run gpedit.msc
Computer configuration
Scripts (startup/shutdown)
Startup
Add
browse for reset driver.bat
Then reboot to test.
SPACE PROBLEMS IN WINDOWS 8.1 AFTER WINDOWS UPDATE (thanks to jcespi2005)
Follow these istructions to clean WinSxS folder:
http://www.eightforums.com/tutorials/44351-winsxs-folder-component-store-clean-up-windows-8-1-a.html
SLEEP PROBLEM IN WINDOWS 8.1 (thanks to sasort)
Follow these istructions:
First open cmd as admin and check status with this command:
powercfg /sleepstudy
It should give you this reply:
No connected standby traces available. Report not generated.
Now start regedit an go here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Power
Change the value of the key CsEnabled from 1 to 0 and reboot.
(1 means connected standby enabled and 0 disabled.)
After reboot.
Now go to the control panel and select Energy, under Advanced there will be many new settings.
Don´t change anything, just select save settings.
Then with regedit change the CsEnabled key back to 1 and reboot again.
Open cmd as admin and again check status with the command:
powercfg /sleepstudy
It should now work and create a sleepstudy-report.html and the sleep function now works as expected.
MANAGE APP UNDER ANDROID (thanks to jcespi2005)
You can use link2sd to move app, libs and data, and FolderMount to link and move OBB and SD data to microSD
BATTERY DRAIN FIX UNDER WINDOWS (thanks to vpx)
The main problem is very old (year 2006) driver of "Intel SD Host Controller", they are 3 in Device manager. Only thing what you need is update driver.
start Computer Management (hold My Computer and select Manage)
select Device management
find SD Controllers, if you click on it, there are 3 "Intel SD Host Controller"s
hold on every one controller, select "Update Driver", select driver from computer, and there is another option "SDA Standard Compliant SD Host Controller", install driver, confirm restart of computer after last update install
reboot
WIFI FIX UNDER WINDOWS (thanks to Hendrickson)
If you see that ping on windows is very strange,sometimes i have lost packets and ping time is not stable try this fix: techtablets repository
BATTERY CALIBRATION FIX UNDER ANDROID (thanks to Hendrickson)
Try this, download and run advanced battery calibrator from Play and Battery Life repair:
Blackmart Studios - Battery riparator
Blackmart Studios - Advanced Battery Calibrator
This seems to have fixed the issue.
Maybe you should copy some post about Air 3G from X98 Air thread?
Nice english instructions for rooting, Win->Android, Android->Win, removal of bloatware etc. would be nice. Everyone can use google translate to navigate official chinese forums but you will get funny translations like "Brush Wizard software". If instructions are unclear and they leave space for interpretation mistakes can happen. Worst case scenario is bricked device.
After using windows and Android I still have the same gpu issues. I also looked in the log and at the end of every crashlog (in android) I see a dev_prive->gpu_error, which is a call from the kernel. (I saw some code on the internet about this) So, my intel Atom chip is bad. Going to return it and ask for a replacement.
The error seems to only happen when I use an app that uses opengl 3.0 (and a LOT of games use that!).
Also about the touchscreen, there seems to be a major problem with the driver in linux. Since I guess they cross-compiled the driver, I am guessing they made the same mistake in both android(linux) and windows.
How did I verify this? Well I used a goodix android application which had some demo app and I saw that the moments the touchscreen gets refreshed are not constant. Let me explain.
When I slide my finger over the touchscreen with a constant speed this happens to my tablets:
This is what my "old and smooth" tablet does(every dot is a touchscreen refresh): .---------.---------.---------.---------.---------.---------.---------.---------. (this is a constant refresh)
This is what my X98 Air 3G does: .--------.--.---------.-.-------.------.-------.-.-----.-----.-.-----.------.----.----.---------.-------.----. (not constant at all)
So the times the touchscreen gets refreshed is not constant. The result is that especially scrolling doesn't work that smooth.
And on top of that, the response time is extremely slow. I am guessing that the driver puts the touchscreen into sleep mode after every single touch, which is stupid. The response (as stated in the goodix GT9271 datasheet) is <200ms. Lets say it's about 100ms, do you know how slow that is??? If your mouse would only refresh every 10th of a second, it would be extremely slow!!!
If I didn't have gpu issues and the touchscreen issue would be corrected, this tablet would be superb, but that is not the case of course.
I am going to contact Teclast if they want my help in enhancing the touchscreen driver. (I am an embedded software engineer specialized in C/C++/C# code)
Also, I might be able to make simple C# app that does most of the work when you want to flash your tablet from android to windows. (this could also be done with a very simple windows batch script)
Jote said:
Everyone can use google translate to navigate official chinese forums but you will get funny translations like "Brush Wizard software". If instructions are unclear and they leave space for interpretation mistakes can happen. Worst case scenario is bricked device.
Click to expand...
Click to collapse
Hi Jote, sorry again for my bad english.
The biggest problem is that most of the information and instructions on how to root, how to change OS,etc.. come from the Chinese manufacturer's forum.
As written before your help in any way will be really appreciated! This is true also about the translation from chinese to the english language.
I ordered this tablet because I think it has enormous potential enclosed in a shell of very small dimensions, if we combine our knowledge to bridge the gap of the Chinese language I think we have great satisfaction with it.
I will try to add link to files for rooting, for change the OS and get other resources asap.
My tablet hasn't arrived yet but I tried to prepare everything.
I'm unable to browse the official forum. I've tried on several days but forums are just working extremely slow. When i try to browse directly through Google Translate I get "Proxy server to access restrictions ". I'll try again someday to find proper threads but right now i'm useless.
So the touch screen is going into sleep states very quickly? I noticed compared to the Onda v975w that it was much slower. I have the X98 3G air now and I have gotten use to it. But it would be nicer if it was how you pointed out.
I have disabled Allow the computer to turn off this device to save power, under power management on the Goodix Touch HID in device manager.
Jote said:
My tablet hasn't arrived yet but I tried to prepare everything.
I'm unable to browse the official forum. I've tried on several days but forums are just working extremely slow. When i try to browse directly through Google Translate I get "Proxy server to access restrictions ". I'll try again someday to find proper threads but right now i'm useless.
Click to expand...
Click to collapse
You have to use translator from bing/microsoft to translate threads from teclast forum at www .bing.com/translator/ (sorry, I'm not allowed to post links yet)
Hendrickson said:
So the touch screen is going into sleep states very quickly? I noticed compared to the Onda v975w that it was much slower. I have the X98 3G air now and I have gotten use to it. But it would be nicer if it was how you pointed out.
I have disabled Allow the computer to turn off this device to save power, under power management on the Goodix Touch HID in device manager.
Click to expand...
Click to collapse
Yes, that it what I am claiming right now based on the information I know and what I have experienced at this point.
I attached the zip containing the datasheet of the goodix GT9271 touchscreen controller. (it's the touchscreen controller inside our tablet if I can believe the log)
The zip also contains an android app from goodix. You can select demo in the menu and then test the touchscreen in various ways. Give it a try
Disabling the "Allow the computer to turn off this device to save power" isn't going to work I think. It can only be done in the driver and I am not sure if it's even supported. It's standard USB stuff, but the GT9271 is connected via I2C. This is a Inter-IC Connection to other chips (IC's) of smartphones/tablets like touchscreen controllers, temperature sensors, accelerometers, gyroscopes etc.
I use it a lot in embedded software engineering and I2C is a very common connection in embedded applications. USB is very heavy for small systems, but I2C does require "special code" to get it up and running.
This will give you a better idea of what an I2C connection is capable of(example of RK3288):
http://www.arctablet.com/blog/wp-content/uploads/2014/02/RK3288-2-nowrmk.jpg
Sorry for all the information
Edit: I contacted Teclast and said I'd like to offer them help for free. Let's hope they accept my free help. (if they are smart...)
Someone can check if is it true?
https://twitter.com/srsroot/status/522464839294550017
petruccig said:
Useful Tools
Root : http://www.mgyun.com/vroot
Click to expand...
Click to collapse
This link doesn't work ...
malojk said:
This link doesn't work ...
Click to expand...
Click to collapse
i uploaded the latest chinese version of vROOT for you and the others :good:
vRoot
http://d-h.st/lWu
With the help of a member of another forum, probably very soon we will have a detailed explanation of the steps for change the Operating System in a better english than mine .
Stay tuned.
petruccig said:
With the help of a member of another forum, probably very soon we will have a detailed explanation of the steps for change the Operating System in a better english than mine .
Stay tuned.
Click to expand...
Click to collapse
Which forum if I may ask?
LVL91 said:
Which forum if I may ask?
Click to expand...
Click to collapse
I've set-up an easy to follow guide (in Greek) for Android -> Windows flashing.
The link is here and the translated (in English) link is here.
The procedure of flashing from Windows -> Android is here (English translation is here).
Feel free to copy it and post it here in order to help others.
I have a question about the screen, namely, whether at you vertically (then best seen) is the difference between the left and right sides of the LCD to the distance from the frame (the black space)? In my left is approximately 2 mm and 1 mm from the right. Such a little thing but unobtrusive I hope you understand what I mean.
Next case. Has anyone tried to install on Android Xposed? For me, after the installation of almost every application resets the tablet .
How can I boost speaker volume in this tablet?