okay i had just installed a new rom on my phone it was working fine until i had turned off the phone for awhile then turned it on it was loading then it got stuck on the startup page i took out the battery put back in it got stuck on the samething again please help!!!
slausell said:
okay i had just installed a new rom on my phone it was working fine until i had turned off the phone for awhile then turned it on it was loading then it got stuck on the startup page i took out the battery put back in it got stuck on the samething again please help!!!
Click to expand...
Click to collapse
If nothing else works, you may have to try a hard-reset: With the phone off, hold down the Talk/Send and End buttons then (while still holding down those other buttons) press the power button. This wipes out all the data on your phone and gives a fresh try at the new rom.
If you really want to start from scratch with a freshly-clean rom-memory, use the Task 29 -- recommended for weird problems.
Is this a custom rom -- which one? Have you posted this problem on that rom's thread?
Start the phone in bootloader mode. Then flash task 29. Then boot into bootloader again and flash another rom
alright it worked thank you so much
i haven't posted the problem the rom was a valkyrie v6 titanium
Next time you should ask this questions in the valkyrie thread. Because this has nothing to do with rom development.
Related
Hello.
I'm opening this thread because my Diamond seems to be diying and I wanted to know if someone got an idea.
Yesterday, my phone suddendly rebooted without warning after a month.
I thought It was nothing, but the phone started to reboot allthe time. The phone boot, show my operator logo (befor the winmo loading screen), and then reboot again, again and again.
I decided to do a little Mtty maintenance and reflash (from internal memory). The phone reworked for a couple of hours and restarted to do a reboot loop. I thought the rom I was using was in fault.
Re Mtty maintenant and flashing the phone with mu Prange stock rom. Several hours léter, the phone restarted to boot.
So where I am ?
If I let the phone off (like a night), he will launch windows and will works between a couple of minutes from a couple of hours befoor rebooting. If I put the phone in bootloader mode It won't reboot and will wait with his beautiful rainbow screen. But if I leav the bootloader mode, reboot over reboot, yay !
When the phonedecide to boot completly,it's a regular soft reset, not a hard reset.
Did anyone here have an idea ? Thanks !
How often did you flash since you have your diamond ?
Try to reflash a radio. Maybe your flash memory is dead =/
It sounds like the rom image might be corrupted - I had this problem with a 28003 rom I tried in which the phone would take a hard reset - boot fine - reset and reload fine... and then whenever you tried to restart it after that it went into a boot loop that eventually came up with a screen saying "the phone cannot boot because of uncertified software or incorrect shutdown procedure"
I solved it by putting the phone into bootloader (switch on holding both power key and volume down key) - connecting it to my computer and reflashing it. It DOES NOT need a activesync connection in this mode but you do need the Hard-SPL on the phone (im running olinex 1.40)
hope that helps
Jemma
Thx JoOos and Jemmauk.
But I already tried to reflash the Radio and the rom Image.
I Tried 3 different Rom images.
One orange official , aztor re-evo and an another one.
But the phone don't display any errors. It will just never stop to reboot without saying a thing.
Same problem in a different thread
Have a look at http://forum.xda-developers.com/showthread.php?p=5279740.
was having problems with getting my hero installed. someone said i needed to install the danger spl. went to here http://code.google.com/p/sapphire-port-dream/
flashed the radio first, it went through and said home + back to reboot and now its off and wont turn on in recovery or anything, how can i fix this?
Pretty sure this is a brick. Don't know for sure though.
You flashed the radio and then the SPL correct? If the phone wont turn on at all, then try plugging it in. If it wont boot up, meaning it just loops somewhere and you cant get into recovery or fastboot, then you might be screwed my friend.
yea, if you're bricked and get a new phone. When you try again, install the radio... then reboot and Confirm it's installed. If it is, then go back and install the SPL. don't need to do it all at once. Better safe than sorry.
only flashed the radio, after it completed it said press home + back to reboot, so i went to reboot and my phone got stuck on a screen with the htc logo, so i puleld out the battery and went to turn it back on and it has no power to it, when i plug it in the orange light doesnt come on at all. Im getting it replaced but im not trying to root the new one, just going to keep it over the air
ach1lles said:
only flashed the radio, after it completed it said press home + back to reboot, so i went to reboot and my phone got stuck on a screen with the htc logo, so i pulled out the battery and went to turn it back on and it has no power to it, when i plug it in the orange light doesnt come on at all. Im getting it replaced but im not trying to root the new one, just going to keep it over the air
Click to expand...
Click to collapse
have u tried booting up infast boot? press camera + power if not its bricked!!!!! GOOD JOB!!!! next time research!!! HTC screen is part of radio install u interrupted it by pulling out the battery.....
So i had damages rom on my hero for over a year now and it worked fine then yesterday i unmounted my sdcard put another one in and the phone froze i restarted it, did nand restore, reflashed the rom and everything and nothing it just keeps boot looping so today i hard reset it ( hold down home key, back key and power button) hoping i could just start from scratch and nothing its still just boot looping. I tired to flash another rom but guess since the phone wont fully turn on my comp doesnt recognize it or pick it up... Please help dont know what else to do. Thanks
digital3721 said:
So i had damages rom on my hero for over a year now and it worked fine then yesterday i unmounted my sdcard put another one in and the phone froze i restarted it, did nand restore, reflashed the rom and everything and nothing it just keeps boot looping so today i hard reset it ( hold down home key, back key and power button) hoping i could just start from scratch and nothing its still just boot looping. I tired to flash another rom but guess since the phone wont fully turn on my comp doesnt recognize it or pick it up... Please help dont know what else to do. Thanks
Click to expand...
Click to collapse
It sounds like you can get into recovery. If so, wipe data,cache,boot,system,dalvik cache. Then flash a new ROM and gapps (from the same thread). It would REALLY help if you would state what recovery and version# you have, what ROM you were trying to flash with what gapps, what radio baseband you have, whether you are s-off or not, and what all you have tried so far, with elaborate steps.
Hi all
I reflashed an old i9000 with CM10.1 for my wife recently, and everything seemed to be working fine. Then it started behaving a bit funny and this week it started rebooting at random. I thought "no worries, I'll just do a fresh flash with stock GB".
However, before I could even give that a go the phone started acting even weirder. As soon as I put the battery in it powers on (without me even pushing the button) but it resets every time it hits the Samsung splash screen. Earlier today I could get it to go into CWM recovery and after clearing cache I actually got it to boot up. But by the time I had downloaded the stock GB files the phone was just constantly resetting at the Samsung logo and now I can't even get it to load CWM recovery using the 3-button method.
I can get it to enter Download mode, and it shows up in Odin just fine. But within 5 seconds it resets itself again so I can't actually perform a flash.
Any suggestions? Or is the phone just plain busted?
mrfurion said:
Hi all
I reflashed an old i9000 with CM10.1 for my wife recently, and everything seemed to be working fine. Then it started behaving a bit funny and this week it started rebooting at random. I thought "no worries, I'll just do a fresh flash with stock GB".
However, before I could even give that a go the phone started acting even weirder. As soon as I put the battery in it powers on (without me even pushing the button) but it resets every time it hits the Samsung splash screen. Earlier today I could get it to go into CWM recovery and after clearing cache I actually got it to boot up. But by the time I had downloaded the stock GB files the phone was just constantly resetting at the Samsung logo and now I can't even get it to load CWM recovery using the 3-button method.
I can get it to enter Download mode, and it shows up in Odin just fine. But within 5 seconds it resets itself again so I can't actually perform a flash.
Any suggestions? Or is the phone just plain busted?
Click to expand...
Click to collapse
I'm just going to answer my own question as I've solved the problem but it may benefit someone else to know how.
It got to the point where the phone wasn't even booting to the Samsung splash screen, but I could still get Download mode to show up for 5 seconds (not long enough to flash). Then in a moment of desperation I got the original Samsung microUSB cable and plugged that in, and booted into Download mode again. This time Download mode stuck! And I was able to flash a clean GB ROM which is now working fine.
So the take-out from my experience is this: sometimes you really do have to use the original Samsung USB cable.
Weird.
Thanks for reporting howto ...:good: good to know
mrfurion said:
I'm just going to answer my own question as I've solved the problem but it may benefit someone else to know how.
It got to the point where the phone wasn't even booting to the Samsung splash screen, but I could still get Download mode to show up for 5 seconds (not long enough to flash). Then in a moment of desperation I got the original Samsung microUSB cable and plugged that in, and booted into Download mode again. This time Download mode stuck! And I was able to flash a clean GB ROM which is now working fine.
So the take-out from my experience is this: sometimes you really do have to use the original Samsung USB cable.
Weird.
Click to expand...
Click to collapse
mrfurion said:
I'm just going to answer my own question as I've solved the problem but it may benefit someone else to know how.
It got to the point where the phone wasn't even booting to the Samsung splash screen, but I could still get Download mode to show up for 5 seconds (not long enough to flash). Then in a moment of desperation I got the original Samsung microUSB cable and plugged that in, and booted into Download mode again. This time Download mode stuck! And I was able to flash a clean GB ROM which is now working fine.
So the take-out from my experience is this: sometimes you really do have to use the original Samsung USB cable.
Weird.
Click to expand...
Click to collapse
I have a similar issue where I'm trying to flash my stock ROM on my Epic4gTouch. When it opens up the download mode error I start to flash and all seems to work before it reboots. Every 5 seconds. I tried the original cable and it did not help. Any ideas??
NerdsBestAdvice said:
I have a similar issue where I'm trying to flash my stock ROM on my Epic4gTouch. When it opens up the download mode error I start to flash and all seems to work before it reboots. Every 5 seconds. I tried the original cable and it did not help. Any ideas??
Click to expand...
Click to collapse
put the cable and press button power the phone go mode charging at this time make the phone in download mode
its ok for me:good:
I have seen a lot of threads on similar problems, but none of them seem to have a fix for me. So, here I am!
A few weeks back, I flashed a custom CM11 ROM to my phone, and it went through without a hitch. The phone did have a few problems, but the dev had mentioned that the ROM had a few bugs, so I didnt think much of it. The phone screen would turn off at random, and if i plugged in the phone while it was not turned on, it would get stuck at the loading screen that precede the battery animation. Like I said, I didn't make much of these.
The dev released the newest update yesterday, so I downloaded it, and when I tried to boot my phone into recovery, the s3 mini splash screen came up for a few seconds, then the phone turned off. This happened several times, even when I tried to turn it on in download mode.
I decided to use Terminal Emulator to turn on recovery, but when I tried to turn my phone on normally, the same thing happened (s3 mini splash screen, then turned off).
I saw other threads on the same matter, but they were mostly due to a pressed-in power button, or were solved with steps that didnt work out for me. Please advise!!!
polski691 said:
I have seen a lot of threads on similar problems, but none of them seem to have a fix for me. So, here I am!
A few weeks back, I flashed a custom CM11 ROM to my phone, and it went through without a hitch. The phone did have a few problems, but the dev had mentioned that the ROM had a few bugs, so I didnt think much of it. The phone screen would turn off at random, and if i plugged in the phone while it was not turned on, it would get stuck at the loading screen that precede the battery animation. Like I said, I didn't make much of these.
The dev released the newest update yesterday, so I downloaded it, and when I tried to boot my phone into recovery, the s3 mini splash screen came up for a few seconds, then the phone turned off. This happened several times, even when I tried to turn it on in download mode.
I decided to use Terminal Emulator to turn on recovery, but when I tried to turn my phone on normally, the same thing happened (s3 mini splash screen, then turned off).
I saw other threads on the same matter, but they were mostly due to a pressed-in power button, or were solved with steps that didnt work out for me. Please advise!!!
Click to expand...
Click to collapse
is it turnoff and keep restart or turnoff and never turn on ?
Ahmed.ragab said:
is it turnoff and keep restart or turnoff and never turn on ?
Click to expand...
Click to collapse
I have the same problem, since two weeks the phone was stuck on the pre-charging logo loading.
This morning the phone showed the same problem of polski, but i can boot in recovery and in download mode.
Every time i try to change something, the phone's situation worsens.
First the phone reboots 5 seconds after the system completely boots.
After a nandroid restore the phone was stuck in S3 mini logo
After that i tried another nandroid restore and it failed.
The phone keep restart, anyway.
Sorry for double-posting, anyway i tried a way to resolve and it had been successful.
I downloaded original firmware from samsung site (obiouvsly the correct one) and i flashed it with odin.
After that i re-flashed Maclaw's CM11 by odin and now the phone work well
HylianHero said:
I have the same problem, since two weeks the phone was stuck on the pre-charging logo loading.
This morning the phone showed the same problem of polski, but i can boot in recovery and in download mode.
Every time i try to change something, the phone's situation worsens.
First the phone reboots 5 seconds after the system completely boots.
After a nandroid restore the phone was stuck in S3 mini logo
After that i tried another nandroid restore and it failed.
The phone keep restart, anyway.
Click to expand...
Click to collapse
HylianHero said:
Sorry for double-posting, anyway i tried a way to resolve and it had been successful.
I downloaded original firmware from samsung site (obiouvsly the correct one) and i flashed it with odin.
After that i re-flashed Maclaw's CM11 by odin and now the phone work well
Click to expand...
Click to collapse
As u can go.to download.mode.. flashing full stock.firmware via odin will solve it
As i said
There's another problem now... the phone works well but there's no more the Samsung Splash screen but a crashed image (like static of TVs)
HylianHero said:
As i said
There's another problem now... the phone works well but there's no more the Samsung Splash screen but a crashed image (like static of TVs)
Click to expand...
Click to collapse
Flash param and image will be alright again.
tys0n said:
Flash param and image will be alright again.
Click to expand...
Click to collapse
The problem started with the GT-i8190N_param.tar flash
Ahmed.ragab said:
is it turnoff and keep restart or turnoff and never turn on ?
Click to expand...
Click to collapse
It turns off and never turns on. :\
I bought a new battery today to see if it fixes the problem, but it didnt. :\
polski691 said:
It turns off and never turns on. :\
I bought a new battery today to see if it fixes the problem, but it didnt. :\
Click to expand...
Click to collapse
if it didn't respond at all so it is a hard brick for sorry
Ahmed.ragab said:
if it didn't respond at all so it is a hard brick for sorry
Click to expand...
Click to collapse
I dont think I made myself clear.
The splash screen does show up, but then the phone turns off immediately afterwards.
polski691 said:
I dont think I made myself clear.
The splash screen does show up, but then the phone turns off immediately afterwards.
Click to expand...
Click to collapse
(can u access download mode if yes so try complete stock firmware via odin
polski691 said:
The splash screen does show up, but then the phone turns off immediately afterwards.
Click to expand...
Click to collapse
First of all do you have a Custom Recovery installed??
If you don't this won't work.
(This happened to me on my S3.
I was using pimp my ROM and upon reboot, turned of after splash screen)
My way to fix this was:
•Download another ROM (for your device) (using a PC or another Android Phone) move downloaded ROM to External SD Card
•Insert External SD card back into Galaxy S3 Android Phone (or you can move ROM file to Internal SD Card if your using a PC)
•Boot into recovery mode.
Turn phone off
Press & hold Power Button, Volume Up & Home Button.
•Factory Reset
•Flash ROM from External or Internal depending on way used.
•Reboot
•Profit
Sent from S3 Mini
Using XDA App
polski691 said:
I dont think I made myself clear.
The splash screen does show up, but then the phone turns off immediately afterwards.
Click to expand...
Click to collapse
Discharge battery using download mode and return to seller for refund or replacement!