What are all the different spls for Dream Aka G1? i keep hearing like danger and hard spl?
http://forum.xda-developers.com/showthread.php?t=455860
htcclay said:
http://forum.xda-developers.com/showthread.php?t=455860
Click to expand...
Click to collapse
Thanks for the link i tried searching but couldnt find it.
That covers the "safe" SPLs, though in theory a bad flash with any bootloader can brick a phone. If you're interested in the "Danger" SPL, which is also known as the Haykuro SPL or the "newest" SPL, check the link in my sig. This SPL really isn't a problem to flash if you have a PVT board and if you make sure to flash to the latest radio first. It also frees up more room on your device, because it takes up less space and repartitions your device accordingly.
I need to know whats the best spl with the highest range of compatibility because hardspl isnt going to cut it forever, or is it one of the best? and whats the difference between death,engineering(the developers i believe?) hryoken (dont know how to spell it) and hard spl?
there are 4 spls, stock, hard, eng, and the spl of many names though technically the 1.33.2005 spl. basically you will either use the hard spl or the 1.33.2005 spl. the 1.33.2005 spls opens up more space in /system and /data so that you have more room for roms and themes. it can also brick the phone when flashing it. you really didn't search very much before making this did you?
I think haykuros danger spl is the best but its danger to flash this spl
david1171 said:
there are 4 spls, stock, hard, eng, and the spl of many names though technically the 1.33.2005 spl. basically you will either use the hard spl or the 1.33.2005 spl. the 1.33.2005 spls opens up more space in /system and /data so that you have more room for roms and themes. it can also brick the phone when flashing it. you really didn't search very much before making this did you?
Click to expand...
Click to collapse
so hard and engineering spls are pretty much the same thing while all the other spls that can possible brick your phone, dont add anything? just more space?
Read the wiki, it lists them and what they are.
Hi everybody
I rooted a G1, I downgrade it with 29RC, then I made the installation of the recovery-RA-dream-v1.7.0 following the flashed the radio (G1-radio-2_22_23_02 and the spl (Latest G1 SPL). I used the 1.6 DRD 3611745 test-keys rooted firmware.
Everything is working well, but when I try to install a firmware as update-cm-6.0.0-DS-RC3-signed, Chromatic 4.4 or extreme-froyo an error showed:
Code:
getprop("ro.bootloader")=="1.33.2011" II ( this message is repeated on the G1)
E:Error in /sdcard/update-cm-6.0.0-DS-RC3-signed (Status 7)
Installation aborted.
Also I tried to update it with update-cm-5.0.7-DS-test3-signed and it was accepted but it does not boot, it stay with the G1 logo.
What could be wrong?, I restore with my rooted backup (1.6) and it work again without problems.
Your comments with be appreciated.
bengar
bengar said:
getprop("ro.bootloader")=="1.33.2011" II ( this message is repeated on the G1)
Click to expand...
Click to collapse
Since no one else has answered I'll give it a try. The 1.33.2011 bootloader line sounds fishy on a G1. What does the actual bootloader screen say? (Camera+Power startup)
oldnoob said:
Since no one else has answered I'll give it a try. The 1.33.2011 bootloader line sounds fishy on a G1. What does the actual bootloader screen say? (Camera+Power startup)
Click to expand...
Click to collapse
Thank you oldnoob for the response. Well it looks like this:
Code:
DREA100 PVT 32B
CLPD-4
RADIO-2.22.23.02
Oct 20 2008
Ok what he is mainly asking you is in bootloader you see the spl. That's what he's saying looks fishy. The rest of what you got looks ok. So tell him what spl your reading in bootloader. And what your bootloader looks like.
sent from my superfroyo dream
Xx12thANG3LxX
Thank you, the spl read as follow:
HSPL10.95.3000
Ok well you know you flashed the radio if it says 2.22.23.02. You have the pvt goin on. So now for the scary part. 1.33.2005 danger spl. As long as you have that radio your good. But make sure ya hear me!!!! When you flash rc29 it will downgrade that radio. So you have to reflash it. BEFORE danger spl 1.33.2005
Good luck may the force be with you!!!
sent from superfroyo dream
So just make sure you go into bootloader holding camera+power button together. Make sure you have radio 2.22.23.02 then you may flash the 1.33.2005 danger spl. Then when you go back into bootloader you'll see the new spl. And the bootloader will have three android skateboarders on it. Then you know your good. And then boot recovery. Wipe. Flash the rom .zip from sdcard. See the problem your having is the spl you have right now. Can't handle the size of the rom your trying to flash.
sent from superfroyo dream
Xx12thANG3LxX said:
So just make sure you go into bootloader holding camera+power button together. Make sure you have radio 2.22.23.02 then you may flash the 1.33.2005 danger spl. Then when you go back into bootloader you'll see the new spl. And the bootloader will have three android skateboarders on it. Then you know your good. And then boot recovery. Wipe. Flash the rom .zip from sdcard. See the problem your having is the spl you have right now. Can't handle the size of the rom your trying to flash.
sent from superfroyo dream
Click to expand...
Click to collapse
Xx12thANG3LxX
Thank you very much, that was the problem as I see I used a wrong spl. But when I hold the camera+power button together I have the three android skateboard on it. Right now I have the G1 with the 1.6 version rooted. In order to make it works for future firmware versions I will need to unroot the G1 with downgrade it again to the RC29, then downgrade the original radio and spl and start from scratch. Or only reflash the new radio and reflash spl but using the danger version.
PD
This G1 is not my is from a friend, but compared with my G1 and it has the danger spl, I will need to reflash the danger spl to my friends' G1.
regards
bengar
Xx12thANG3LxX said:
Ok well you know you flashed the radio if it says 2.22.23.02. You have the pvt goin on. So now for the scary part. 1.33.2005 danger spl. As long as you have that radio your good. But make sure ya hear me!!!! When you flash rc29 it will downgrade that radio. So you have to reflash it. BEFORE danger spl 1.33.2005
Good luck may the force be with you!!!
sent from superfroyo dream
Click to expand...
Click to collapse
Why you guys want to install always DangerSPL? It's never needed, there are much more flexible and more secure ways to get enough space for FroYo-ROMs.
Only my 2 cent.
Andisa has a point. Not super needed anymore. But its just what I run. And once you got it the first time. No headache or chances after that. But no when you change roms you do not need to go and do that all over again to answer your question. So now if you have the proper radio and spl. You installed a custom recovery. Now go ahead put zip file on sd wipe and flash. You should be good to go.
sent from superfroyo dream
Xx12thANG3LxX said:
Andisa has a point. Not super needed anymore. But its just what I run. And once you got it the first time. No headache or chances after that. But no when you change roms you do not need to go and do that all over again to answer your question. So now if you have the proper radio and spl. You installed a custom recovery. Now go ahead put zip file on sd wipe and flash. You should be good to go.
sent from superfroyo dream
Click to expand...
Click to collapse
Xx12thANG3LxX
In my own G1, I have the danger spl installed too and never have had any problems with it, in this case, when I was flashing this G1 I knew that I was using the last radio but when I was ready to flash the spl I saw that I had two versions, the Latest G1 SPL, and haykuro_new_spl-signed.
I had selected the Lastest G1, After that I flashed with the last roms mentioned above and here I am trying to fix this. All the ways, the 1.6 is running smooth. Thank you for all and I am very happy to all your help.
bengar
No problem. I'm glad we got it working for ya
sent from superfroyo dream
hey guys whats up? im sorry if this is a waste of space but i was wondering if anyone knew where to find a list of all the radios, hboots and spl's for the g1 so i can kinda keep track of things more lol
To get started, there's Danger/Death/haykuro SPL which is 1.33.2005. Then there is SafeSPL which is 1.33.2003, and Hard/Engineering SPL with is 0.95.xx (never used it). And there is that new 1.33.001d or something for the new radio
Hello,
I have an htc G1 and want to upgrade to Gingerbread.
But every time i try to flash gingerbread i get error 7 in cwm.
After reading some topics i saw that i need SPL 1.33.0013D
Now I have 1.33.2005, radio 2.2.19.26I and i also have a PVT board
How can i get SPL 1.33.0013?
Everything you need is described in Terry's +15MB thread.
than you very much
I've got it working!!