okay so when my n1 is in sleep, it takes like 3 tries to wake it up. The first time I press the unlock button the unlock screen comes and then goes back to sleep instantly. The second time the lights for the back menu home and search light up and that's it. the third time it works. I'm on froyo. anyone else with this problem?
I have a similar issue.
Sometimes just the capacitive buttons light up and not the screen. I have to make 2 or 3 tries to get it to turn on. Its rare, but its there. It only happened on 2.2.
ok good, me too!
was just looking for this topic.
mine doesnt always turn anything on at all. sometimes the light go on, others nothing. Also trying to turn off the phone is hard as it sleeps straight away with out opening up the power menu.
I have a stock N1, which recently updated to Froyo, with the same problem.
any ideas would be great!
cheers,
lorin.bute said:
I have a similar issue.
Sometimes just the capacitive buttons light up and not the screen. I have to make 2 or 3 tries to get it to turn on. Its rare, but its there. It only happened on 2.2.
Click to expand...
Click to collapse
Also happens on CM 5.0.7.1.
i think it may be a hardware button issue.
I have tried turning mine off (had to pull the battery out) and then to turn it on.
It should turn on readily as it has nothing to do with the OS at that point.
any ideas?
No HW button issue described. HW button works - if it didn't, lights wouldn't go on. It's a wrong reaction on the button, at least that's what OP describes (and me too).
Your N1's power button is dying, it's a known HARDWARE issue. I experienced all of that what you may think a software bug, nut dear friends, prepare to meet HTC or Google for warranty. My N1's power button is dead, I couldn't swap for a new one because I bought it in my country where no official distributor for N1 yet. Sad!
ps: you may try to search for "N1 power button" and see there are more and more reports about this problem.
I've read more than one or two threads on power button issues, and I know what I'm talking about. My power button DOES power up the phone when the battery is taken off the first shot, it DOES wake the phone from standby, it DOES register long presses - there was even one time when a second press was long, and suddenly the screen woke up with power menu, while the first press left it dark with touch button light going on.
Doesn't look even a bit like HW to me. HW would leave the phone dead, non-responsive to touches, or create a loose touch which would translate into several touches - none of those would EVER turn into a phone being on with screen off, and suddenly snapping back to screen on when the SCREEN is touched several times.
Could be your cpu was too busy to accept any inputs.
I have a thread about it here:
http://forum.xda-developers.com/showthread.php?t=692874
Take your time! As for me, I'm using my N1 for 3 months now for the power button to completely dead with everyday use (I didn't use any app to trackball-wake).
As I said, all the things you are yelling I have been through. And I, too, thought it was software problem.
I tried both MCR and Cya with no hope.
Good luck!
ps: One of my friend just told me about his N1's power button issue right after hearing me telling about mine.
This sucks
anyone know where i can buy a new button??
Corrupt SD Card
I had the same issue. I'd press the power button, the bottom four buttons would light up but no screen wake. Only way to get out of it was to pull the battery. It would happen maybe 30-40% of the time. (Nexus One Froyo FRF72)
I think it was due to a corrupt MicroSD card. I recently installed a 32gb card and put some music on it using songbird and possibly didn't safely remove. That's when I started getting issues. Removed the SD card completely and it worked fine. Changed back to the old card and no issues. Then formatted the 32gb and tried again, worked fine. Then I tried to transfer more music, there was an error and I got the same problem. (Cheap ebay card from Hong Kong, that'll teach me).
Anyway, I'd be interested to know if that solved anyone else's problem, because all I see on forums are that it's a faulty power button, but that didn't seem to be the case in my situation.
Cheers,
Dylan
-Witty esoteric statement about science/technology.
Mine is doing kinda the same weird thing but a little different.
When I push the power button the screen comes on but is unresponsive to touch. If I press the power button again the screen dims and then turns off, the home keys light up and then the trackball glows white. The phone then does not respond to the power button for around 10 secs and repeats this behavior 4 or 5 times until it actually starts working correctly and I can swipe my finger to get to the home screen.
It usually does this after being inactive for a period of time, like after sitting overnight.
FRF91
LancherPro Beta 0.6.7.2(maybe the problem?)
jimbobalu said:
Mine is doing kinda the same weird thing but a little different.
When I push the power button the screen comes on but is unresponsive to touch. If I press the power button again the screen dims and then turns off, the home keys light up and then the trackball glows white. The phone then does not respond to the power button for around 10 secs and repeats this behavior 4 or 5 times until it actually starts working correctly and I can swipe my finger to get to the home screen.
It usually does this after being inactive for a period of time, like after sitting overnight.
FRF91
LancherPro Beta 0.6.7.2(maybe the problem?)
Click to expand...
Click to collapse
i have almost the same issue, although mine happened twice when i was on EPE54B but it's been far more common on FRF91
the only difference is my power will continue to turn the back light on and off no matter if the screen has already timed out or not
kobecamp2009 said:
okay so when my n1 is in sleep, it takes like 3 tries to wake it up. The first time I press the unlock button the unlock screen comes and then goes back to sleep instantly. The second time the lights for the back menu home and search light up and that's it. the third time it works. I'm on froyo. anyone else with this problem?
Click to expand...
Click to collapse
I have exactly the same issue. Over in the general forum, there's another thread on this issue. Many, myself included, are reporting that this problem started after the FRF91 update. Can you confirm?
rtx101 said:
Your N1's power button is dying, it's a known HARDWARE issue. I experienced all of that what you may think a software bug, nut dear friends, prepare to meet HTC or Google for warranty. My N1's power button is dead, I couldn't swap for a new one because I bought it in my country where no official distributor for N1 yet. Sad!
ps: you may try to search for "N1 power button" and see there are more and more reports about this problem.
Click to expand...
Click to collapse
Read again carefully. Are you sure your hardware problem was identical to what the OP described? I've noticed a lot of people with obvious hardware problems (i.e., the power button is completely unresponsive) posting on threads like this when they actually have a different problem. It's very confusing.
britoso said:
Could be your cpu was too busy to accept any inputs.
I have a thread about it here:
http://forum.xda-developers.com/showthread.php?t=692874
Click to expand...
Click to collapse
This sounds VERY promising -- thank you britoso!
PS: Are you guys getting the unresponsive unlock slider like britoso describes?
I had this problem when I first flashed CM6 yesterday. Even after wiping and reflashing it was the same. Only way to get out of the black screen was to do a soft reset, power + vol down + trackball. I finally found out that my SD card malfunctioned and was corrupt. I tried reformatting the sd card in an microsd card reader but windows said it could not be reformatted. I finally switched back to another microsd card that was working, wipe and reflashed cm6 and the problem went away. Try backing up all the data on your microsd onto your computer then reformat it and wipe then reflash to see if it works
Edit: ughhhh it just happened again, but not as bad as before, turns back on after second try... maybe i didnt press the trackball hard enough
Related
Hi, I cleaned the screen of my HTC Diamond with a bit of alcohol and a pice of tissue and it seems that the alcohol got inside of the Power button. Now, every time I try to turn the screen on by touching the power button, it turns the screen on but it dispays a message that says: "Warning: Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
If I click YES, it reboots the phone, If I click NO, then its ok. That is fine, but the problem is when I want to turn the phone off. It's impossible. It will keep trying to reboot.
Does anybody know what can I do? I am really worried.
One solution could be to make some other button from the phone to act as the power button (like the Home button that is rarely used). How can I do that?
Please help!!!!
Thank you
Hi,
I have the same problem.
Did you already find an answer ?
No, I didnt find the solution. I tried to fix the hardware but didnt succeed. So, I created a dummy file to emulate the poweroffwarning.exe that pops up when you long press the power button.
Solution
Hello, I have one AT&T TITL 8925 that upgraded to Windows Mobile 6.5
After the new software was loaded I saw same behavior on my phone.
When the phone is ON and I pressed the power button sometimes it do not respond, and others I received the warning message "power will be turned off and you may lose data if you have not saved them..." My first tought was that it is because the processor is slow to this new software release, or maybe my phone is damaged. I was working perfectly with previous (light version) release so my final guess is that this sw requires more uses of the processos.
Anyways what I have been doing is before turing it off I press the red button or hang up button, and after this if I press the power button it works fine (No more warnings). I have some theories but I will keep doing the same
Hope this partial solution helps you as it does for me.
Regards
Jerry
this is not working for me :| the problem is i can't use my power button not even to open my display when it goes to sleep :|:| i don't know what to do guys please help me
You can use the Stylus to awake the phone, instead of using the power button. You can also use TouchLockPro, to suspend the device, so you do not need the power button for that too.
Also you can set the phone to awake on pressing any key (Windows Mobile Setting), but be sure to have a good locking tool, which makes sure you do not have bogus calls and it goes to sleep again fast enough, otherwise it will drain battery.
I have the same problem.
Anyone solved this one?
I have the same issue and this is not a hardware problem. Strange since even updates/changes of the rom do not correct the issue. Did anybody find a solution for this...?
Well.. ive had this problem just ones.. I was walking downtown with my diamond in the frontpocket of my jeans (face down), after about 3min. of walk, it started to rain (big drops), and my clothes got completely wet, i turned around emidietly, to walk back to home. When i got home after 3 more min. i layed the phone on the table, and then i could hear there were somethibg wrong.. The "turn off" sound came, and the notification kept on coming up, even though i pressed No, as if i were just holding the power button down.. Then i began to press the power button continuesly for about a 100 times, and to my surprise then it stopped and have functioned perfectly for about 2 month now.. Something tells me theres some serius promlem with the smallest kind of moisture near the power button on this phone..
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
Hi! on one of my diamond, the power button off from the board. So the black little board with the button itself is not part of the complete circuit anymore... if someone know the hw testpoint for that it would great please.... i see a few TP around, but if i just start sorting them i just going to kill it...I use to flash phones with TP so is not new for me , but i find nothing for diamond.
I have a similar issue. Mine seems like it is almost stuck on, so it wakes its self up all the time, meaning a full charge lasts an hour or two. Then when it runs out of battery it tries to switch itself back on, so goes through a continuous cycle of vibrating and beeping until the battery is removed. The gf finds it very annoying at 3am lol.
Don't recall mine getting wet, but it's possible it could have got damp at some point, but it's been doing this now for about 3 weeks.
Tried a hard reset with no luck.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
2004mark said:
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
Click to expand...
Click to collapse
I think I should send it to HTC, and ask them to do it. Or go to a repair centre. But I should not try it myself, because it can be dangerous for the diamond.
Also try searching on ebay, there might be the parts you could use.
Good luck!
is there a way to remap the power button?
my diamond face same problem since this afternoon, arrrrgghhhh!!!
- blocking hwbutton1, hwbutton2, hwbutton3, hwbutton4, hwbutton5, hwbutton6, hwbutton7 >>>> NO LUCK
- hard reset >>> NO LUCK
guys, any of you solved the problem yet
youtube.com/watch?v=Q4SEQ6AUFOI
My Sony X1 have some strange problems with the power button. When it goes into sleep mode, I can not wake it up with the power button, all I can do is to soft reset. Sometimes it does not go into sleep mode either , it just "wake up" all the time. I don't know what's wrong with it, tried Hard reset but no use .
ANyone had this problems before?
@
The only way to solve this is to leave the phone near your laptop heat vent ( fan) . hot air from it might help you to get the power button up and running. But if that to doesn't work then i'm afraid thats bad.
Current sol :
1. download SU2U ( search threads )
2. go to the settings and make the " lock when stylus inserted" option ON
3. Change the screen turn off time to 5 secs..
So , to unlock , remove stylus , to lock -> insert it back ( its turns off the back light within 5 sec )
Less annoying
elektros said:
youtube.com/watch?v=Q4SEQ6AUFOI
Click to expand...
Click to collapse
thanks for this link, i accidentally tear off my power button flex. now i could turn it on again. Thanks elektros
i noticed recently that if i press the power button, it sometimes takes a really long time to turn the screen on. i know the hardware works because the backlight in the soft buttons turns on immediately, but the screen remains black for up to 10 seconds. this happens rarely. however, im fairly sure it isnt a software problem because ive wiped completely and installed a fresh rom and the problem seems to persist. perhaps i just recently noticed, and the problem was always there? does anyone else have this problem?
three threads above yours.
http://forum.xda-developers.com/showthread.php?t=681723
could be a hardware issue.
Mine does this every few days.. I am still on the stock 2.1 rom.
Mine also does this, I only noticed it after flashing Cyanogenmod 5.0.6. so I thought it might have been a bug. I also assumed it was a bug because the phone seems to act strangely when you are touching the screen and try to hit the power button.
Hopefully this isn't a hardware issue, I've had the phone since release.
Is anyone else experiencing similar issues?
It happens to me as well, but very infrequently. Maybe every few days... so it doesn't bother me enough to worry about it.
I'm on stock ROM btw.
I am leaning towards thinking this may be software related. A few minutes ago I was at the lock screen and tried about 50 times (yes I waited long enough after each press) and simply could not get the screen to turn off. I then tried long pressing the power button and, sure enough, each time it would bring up the shutdown menu (yes, over the lock screen). Must be a bug right?
Hmm, my problem's slightly different. Around half of the time, I have to press the power button twice to turn the screen on. Sometimes, pressing it the first time doesn't turn the screen on, had to press the power button firmly again.
This started only recently. On stock n1 and bought it during feb.
that means that your power button is dying, like many others' (including mine)
this is the first time, it takes 2 clicks to work....than it will increase.
Expect a repair soon...
Well i am having the issue other way around. i am not been able to put my phone in stand by mode by clicking on it and it is do a hard press then i get options to shut off the phone
any suggestions what might be causing it ?
I'm happy I haven't received this problem yet
-------------------------------------
i want my yogurt lol froyo time
negroplasty said:
Mine also does this, I only noticed it after flashing Cyanogenmod 5.0.6. so I thought it might have been a bug. I also assumed it was a bug because the phone seems to act strangely when you are touching the screen and try to hit the power button.
Hopefully this isn't a hardware issue, I've had the phone since release.
Is anyone else experiencing similar issues?
Click to expand...
Click to collapse
I am having the same issue and i wonder if you were able to find the cause for it. I have the same rom as you do on your phone
negroplasty said:
I am leaning towards thinking this may be software related. A few minutes ago I was at the lock screen and tried about 50 times (yes I waited long enough after each press) and simply could not get the screen to turn off. I then tried long pressing the power button and, sure enough, each time it would bring up the shutdown menu (yes, over the lock screen). Must be a bug right?
Click to expand...
Click to collapse
I have a similar problem. When I unplug the N1 from the charger, the screen comes on showing the lock screen, and I can't get it to turn off. If I unlock the phone, however, then the power button works normally. I don't think it was doing this until recently (I bought it in January the first day it was offered and am running the stock update1 ROM).
So here is my theory if the power button is a problem then it needs to act up both ways and not only one way. right now i can put the phone in sleep mode but i can wake it up. i will post the issues on the development forum and might be able to find an asnswer to it
So seems like the issues is because of Cyanogenmod 5.0.6 because since i have flashed another rom it is working just fine. i will be doing some more testing before i can be certain
Another problem I am experiencing is when I long press the power button, it pulls up the phone options menu but also turns off the screen. It's extremely frustrating as it does this quite frequently; right after I power on the screen again and unlock the device it works properly every time - so much so that I am convinced this is a software issue.
I am now running froyo, rooted with Cyan's minor root patch. I can also say for sure I experienced the same problem on CM 5.0.6, but it definitely occurred less frequently.
Am I alone here?
di2356 said:
i noticed recently that if i press the power button, it sometimes takes a really long time to turn the screen on. i know the hardware works because the backlight in the soft buttons turns on immediately, but the screen remains black for up to 10 seconds. this happens rarely. however, im fairly sure it isnt a software problem because ive wiped completely and installed a fresh rom and the problem seems to persist. perhaps i just recently noticed, and the problem was always there? does anyone else have this problem?
Click to expand...
Click to collapse
I just started having this problem after upgrading to 2.2.
I have this every so often. But sometimes wonder if it is flyscreen doing it
You guys should all just be running the app no lock to take the power autumn out of the equation.
Ahhhhh! I just need trackball wakeup!
I have a similar issue where my screen will turn on but will be unresponsive. When i turn it on and off, the backlight jut comes and goes. If it times out it won't turn back on for a bit(the backlight will come on still).
I just wiped my phone, hoping that'll fix it since it only started happening on a regular basis since I updated to Froyo
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
ummm the power button on the nexus one has an incredibly high failure rate, all over the forum here. its a design defect from the factory. that's why it has always been recommended to root the device immediately, and use trackball wake, so you avoid using the power button as much as possible. you have to send the device to HTC for repair, that's your only option...
Thanks for the information. I will have to look into repairs.
You are already running a rooted rom with track all wake. Use it. To reboot the the phone use quickboot. At this stage you really don't need the power button on your phone.
pcflet01 said:
... now that I have installed CM7.
I push the power button and the screen turns on and then back off almost immediate
Click to expand...
Click to collapse
This is a problem with CM7. Most advise turning off the screen off animation if it becomes a big problem for you. Make sure you are using the newest nightly and hope for a fix. I don't know if the RC's have this problem, but I would bet it appears on the 7.0.3 release.
At first glance that seems to have helped. Thanks for the advice!
No problem.
Also you can use widget locker to lock the screen then the trackball to wake, with that and quickboot I don't even touch my power button anymore. Although your problem doesn't sound like a broken power button so in your position I would switch ROMs and see what happens.
pcflet01 said:
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
Click to expand...
Click to collapse
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
As others have mentioned, this does not sound like a powerbutton issue, because the powerbutton still turns on the screen. The problem is that the screen turns off immediately after it turns on.
When you flashed 7.0.3, did you come from a previous CM verison? From stock? My first suggestion would probably be to wipe the /system partition (in CWM, it is under mounts and storage -- with Amon_RA, you need to find a flashable zip to do it) and reinstall CM and gapps. This will not cause any data loss. Sometimes, if you install a new ROM over an old one, the upgrade script in CM can get confused and carry over files that aren't supposed to be carried over. The system wipe fixes that.
I've been using this RC since it came out in late June. Only this week did it start flipping out on me.
Sent from my Nook Color!
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
bassmadrigal said:
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
Click to expand...
Click to collapse
I'm currently using S2E for apps2ext and some data2ext. How would a system wipe and reinstall interact with that? I'm a bit nervous on that front.
A system wipe shouldn't change any of that. It is one benefit of using S2E as it is a standard app that is stored in the /data partition without any changes to the /system partition.
Anyway, to be safe, it is a good idea to do a nandroid backup anytime you are doing something that involves the majority of the features in recovery.
It's a hardware problem for me. Failed completely as of today.
Sent from my Nexus One using Tapatalk
CM7 7.1.0
My power button seems to be in the process of completely failing. The new CM7 update to 7.1.0 has made it possible for me to lock the screen without using the power button using the "Notification power widget" -> "Go to sleep". Now the only times I have to use the power button are to shut the phone down or wake it up, which seems to be easier when the phone is plugged in to a wall charger. Are there any simple apps for shutting the phone down and maybe waking it up at a set time?
The only reliable trick I found to turn it back on was to plug into the wall and take the battery out/in a few times till it vibrated.
I ended up getting a replacement phone and then I sent the Nexus to HTC. They quoted a $55 repair cost off warranty which my credit card insurance would've covered, but when I asked for an invoice they offered to just waive the charges. Finally over a month later it came back fixed.
The app Easy Reboot can shut the phone down.
Sent from my Nook Color!
I also use an app called Lock Screen, which just locks the screen. I have it stored in my dock, because I don't like the space being used in the notification widget.
CM7 has an option for one of the items in the notification tray widget to be a lock screen button.
cmstlist said:
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
Click to expand...
Click to collapse
THANK YOU!!!! This has been driving me crazy. Turning off the screen-off animations did nothing, but turning off the screen-on animation seems to have fixed the issue. My power button is toast (my new power button ribbon cable just arrived... time for surgery), and I've been using the trackball to wake my phone. Before the power button died, it did the same thing. I'm using CM7.2. I installed it after rooting and went straight to cm7.2 from stock, so obviously the cyanogemnod crew haven't fixed the issue since 7.0.3 when this thread started.
ok so i've been using it a bit but my battery was 70% last i checked. was playing around with throw and just opened youtube and the screen flickered a bit (black lines) then decided to go black completely.
nothing i do will make the screen do anything.
holding the power button for ages (usually the way to turn off/reboot a phone) doesnt do anything. the backlight is on as i can see that. but nothing is on the screen.
anyone got any ideas on how to force a shutdown/reboot on these?
thefunkygibbon said:
ok so i've been using it a bit but my battery was 70% last i checked. was playing around with throw and just opened youtube and the screen flickered a bit (black lines) then decided to go black completely.
nothing i do will make the screen do anything.
holding the power button for ages (usually the way to turn off/reboot a phone) doesnt do anything. the backlight is on as i can see that. but nothing is on the screen.
anyone got any ideas on how to force a shutdown/reboot on these?
Click to expand...
Click to collapse
IIRC the Xperia Z1 has a hard reset button under the sim flap, it's a small red button, give it a shot.
remove sim card and sd card and try again, if it's still not responding do an update repair using SUS or PCC
BTW there is a known fault with the XZU and it could also be on the Z1 as they use similar Firmware, what people have found is that the phone will start up eventually and then they go into the display setting and untick the auto backlight option and that fixes it
I also reboot my Z1in this way when it blackout.
Sent from my C6902 using xda app-developers app
Had the same issue called Sony, push hard reset button all is fine in the world. Known issue Sony is working on it
Sent from my C6903 using Tapatalk 4
Managed to hard reset using power and up volume .
Put it on charge overnight but it doesn't see,m to have taken any charge at all....just trying again using diff PSU and cables but it doesn't want to charge. It recognises that I've out a cable in as I played with the smart connect setting. When it is off completely I get a red light (presumably meaning its charging ) but not in android
Any ideas?
Got it charging again by pushing the red button near sim slot for a couple seconds.
Just had another issue with SD card not being recognised after I removed another (/safely) had to reboot again using power plus vol up as it stuck on the shutdown logo when I tried to power down'...
Wow I can't believe the amount of issues I've ran into within 24hours of having this thing. I really don't know what to do...return it because it sounds like a faulty device (but all the issues are seemingly unrelated) or return and get another phone (is anyone else getting problems like I am?)
Sometimes phones have issues. I got one once that had no speakers or Mic inside... it happens lol
Try to go exchange it, and see if the next device gives you issues.. if not then you're good, if it does pick a different phone..
Do it soon though, most carriers only have a 14 day exchange period, and then after that will charge you all sorts of fees and try to fix your phone rather than just giving you a new one....
Sent from my 16GB Blue Verizon Galaxy S3 running MIUI v5 with KT kernel
thefunkygibbon said:
Got it charging again by pushing the red button near sim slot for a couple seconds.
Just had another issue with SD card not being recognised after I removed another (/safely) had to reboot again using power plus vol up as it stuck on the shutdown logo when I tried to power down'...
Wow I can't believe the amount of issues I've ran into within 24hours of having this thing. I really don't know what to do...return it because it sounds like a faulty device (but all the issues are seemingly unrelated) or return and get another phone (is anyone else getting problems like I am?)
Click to expand...
Click to collapse
sounds like a similar problem I had with my 64gb SD card - as I mentioned above remove all cards then start from there - a reflash of the firmware might help also
thefunkygibbon said:
ok so i've been using it a bit but my battery was 70% last i checked. was playing around with throw and just opened youtube and the screen flickered a bit (black lines) then decided to go black completely.
nothing i do will make the screen do anything.
holding the power button for ages (usually the way to turn off/reboot a phone) doesnt do anything. the backlight is on as i can see that. but nothing is on the screen.
anyone got any ideas on how to force a shutdown/reboot on these?
Click to expand...
Click to collapse
Something happened to mine with Youtube too. I'd started a video and paused it on a frame for comparison with another screen. While I was setting the other phone up, the screen on Z1 timed out. I pressed power, the screen come on and flickered, then went black!
Power and both volume keys function the same as the red button under the flap. I wasn't able to reproduce the bug.
LadFromWales85 said:
Something happened to mine with Youtube too. I'd started a video and paused it on a frame for comparison with another screen. While I was setting the other phone up, the screen on Z1 timed out. I pressed power, the screen come on and flickered, then went black!
Power and both volume keys function the same as the red button under the flap. I wasn't able to reproduce the bug.
Click to expand...
Click to collapse
yeah i've been trying to reproduce it and failing to. very odd. maybe its something to do with the first time you use youtube and do something specific?
gunna phone o2 up tomorrow and see what they say about all my issues. seems to have been fine this last 24 hours though and in their eyes that is prob reason enough not to issue a replacement.
I've had mine since Monday and this happened to me yesterday. I was troubleshooting sending MMS with T-Mobile tech support (not a phone issue as it was happening on previous phones too) and had to restart the phone several times. I noticed upon restarting that the backlight seemed to be on but the phone was not booting up. Had to perform several hard resets (both with the red reset button as well as the power/volume up buttons) before it FINALLY rebooted and stayed on. While trying to figure this out I ran a Google search to see if others were having this problem. One solution was to make sure the backlight option is checked. I had been messing with settings the night before and must have unchecked it. Since I rechecked it I haven't had the same issue.
Hi,
My note 8's screen got damaged a month ago, but
from past two days the power button seems to be
unresponsive.
I have to press it atleast 10-15 times for my screen
to wake up.
Even if the screen doesnt turn on by a single click,
the usual touchscreen functions still work.
Ex: I can still open the particular app by clicking the screen
on the specific area.
Kindly help.
rockz1991 said:
Hi,
My note 8's screen got damaged a month ago, but
from past two days the power button seems to be
unresponsive.
I have to press it atleast 10-15 times for my screen
to wake up.
Even if the screen doesnt turn on by a single click,
the usual touchscreen functions still work.
Ex: I can still open the particular app by clicking the screen
on the specific area.
Kindly help.
Click to expand...
Click to collapse
There's nothing any of us can do to help you when it's a hardware issue like this. You need to open the back of the phone using a heat gun to loosen the glue and then take the power button out and replace it with a new one.. There's nothing else that can be done and I would suggest that you not shut the phone down or let the battery die out because then you may not be able to turn it back on until you get the power button taken care of!
MrMike2182 said:
There's nothing any of us can do to help you when it's a hardware issue like this. You need to open the back of the phone using a heat gun to loosen the glue and then take the power button out and replace it with a new one.. There's nothing else that can be done and I would suggest that you not shut the phone down or let the battery die out because then you may not be able to turn it back on until you get the power button taken care of!
Click to expand...
Click to collapse
Hi MrMike2182,
Thanks but let me elaborate the issue.
The power button seems to be working fine because it takes approximately 10 to 15 clicks to turn on the screen (sometimes 1 or 2 click)
Let's say that I click the power button and the screen doesn't turn on, the screen functions work fine despite showing black screen.
Ex:
1. If I click on screen location where samsung music is placed and open it, and if I and click on the location of the play button, it plays the music just fine.
2. If I click on the restart button when the screen is black (not turned on), the phone does restart. The Samsung logo lits up just fine. (Mensing to say, the bootup process is not affected)
Also, note that if I successfully manage to turn on the screen after clicking the power button 10-15 times and if I put it to sleep again. I can easily turn on if I click the power button immediately (within the span of 2 seconds).
The problem persists only if the phone is kept I'd for 5 to 10 minutes.
rockz1991 said:
Hi MrMike2182,
Thanks but let me elaborate the issue.
The power button seems to be working fine because it takes approximately 10 to 15 clicks to turn on the screen (sometimes 1 or 2 click)
Let's say that I click the power button and the screen doesn't turn on, the screen functions work fine despite showing black screen.
Ex:
1. If I click on screen location where samsung music is placed and open it, and if I and click on the location of the play button, it plays the music just fine.
2. If I click on the restart button when the screen is black (not turned on), the phone does restart. The Samsung logo lits up just fine. (Mensing to say, the bootup process is not affected)
Also, note that if I successfully manage to turn on the screen after clicking the power button 10-15 times and if I put it to sleep again. I can easily turn on if I click the power button immediately (within the span of 2 seconds).
The problem persists only if the phone is kept I'd for 5 to 10 minutes.
Click to expand...
Click to collapse
Ok based on what you said now I don't believe there's anything wrong with your power button and when you press it and the screen doesn't turn on, in reality it actually is on and it's possibly damaged which is why you can still use the screen functions with the black screen. Whatever type of damage you say happened to it could be causing the backlight to not work but the screens touch function is fine.. Try rebooting into recovery mode and select to clear the phone's cache only and see if it helped anything.. If it doesn't help anything it's pretty much a screen hardware problem and you'll still have to get into the phone's internals..
MrMike2182 said:
Ok based on what you said now I don't believe there's anything wrong with your power button and when you press it and the screen doesn't turn on, in reality it actually is on and it's possibly damaged which is why you can still use the screen functions with the black screen. Whatever type of damage you say happened to it could be causing the backlight to not work but the screens touch function is fine.. Try rebooting into recovery mode and select to clear the phone's cache only and see if it helped anything.. If it doesn't help anything it's pretty much a screen hardware problem and you'll still have to get into the phone's internals..
Click to expand...
Click to collapse
Thanks,
Unfortunately, even factory resetting the phone didn't work out.
Anyway, I will take for service.
Hopefully it might resolve the issue
rockz1991 said:
Thanks,
Unfortunately, even factory resetting the phone didn't work out.
Anyway, I will take for service.
Hopefully it might resolve the issue
Click to expand...
Click to collapse
Since the factory reset didn't work, then unfortunately it really is a hardware issue.. I think you need a new screen..
I have the official led cover case, just opening the case will turn the screen on... Just a temp fix until you can get it repaired maybe.
stonedpsycho said:
I have the official led cover case, just opening the case will turn the screen on... Just a temp fix until you can get it repaired maybe.
Click to expand...
Click to collapse
Thanks stonedpsycho. I will have a look at it.