Database Develop

usb connection charges, but computer won't connect

okay
so i plug in my tilt into the cradle, or the mini usb cable connection that i have, and in either case, the orange light comes up and the phone does indeed charge...however, the computer does not pick it up at all, i've tried on several computers already, and i tried it with pdacorner 16 and 18, both of which worked fine up until recently when this started happening...
so my question is, is it possible for the mini usb port on my tilt to have gotten messed up to the point where it still charges, but the connection to the computer doesn't work...
if so, what can i do about it?
the main reason i want to connect to the computer is to be able to use the 3g internet on my laptop/desktop, is there another way to do this?

The answer to the first question to the best of my knowledge is yes. The second question, you can send it to HTC or another repair company to get it repaired. I assume you have already tried a hard reset though. You can still tether your computer to your modem using your device's Wi-Fi and a program like WMWifiRouter. It isn't free, but it has many useful features including the ability to use your device's data connection over Wi-Fi. And FYI, if your computer has built in bluetooth (or you have a USB bluetooth USB key like I do), I think you can also tether over bluetooth without WMWifiRouter. I hope that answers your questions
Dave

Question: USB Tethering [CM-4.2.5]

I have been fighting tooth and nail to get this to work.
My setup I'm currently working with is:
>>1 USB cable
>>HTC Dream with CyanogenMod 4.0.4 W/ Wifi tethering capabilities through Wifi Tethering for Root Users
>>HTC Dream with CyanogenMod 4.2.5 W/ USB tethering "capabilities". Couldn't get Wifi tethering to work with this phone. It just doesn't seem to want to work.
>>EeePC 4g Surf with an nLited XP 32bit Professional install With SP2 (Realtek is the worst about drivers, so instead of being able to streamline SP3 into my install, I had to use SP2 and still had to make the realtek drivers work! A known issue with it.) The nLited part shouldn't be a problem, but if it is, I'm sure it is an easy fix. ;D
Attempts to Resolve issues/issues:
1. I have installed HTC Sync.
2. Upon connecting the phone with the USB Tethering capabilities, I have a nice little exclamation mark (!) on the NDIS blablabla in Device Managers.
3. Attempting to install the drivers does not work, because it does not seem to be capable of finding the files even though they're there. Per http://code.google.com/p/android-wired-tether/wiki/FAQ .
4. Attempting to install the drivers from http://forum.xda-developers.com/showthread.php?t=445436 does not work either. It just didn't see those drivers either.
5. Tried uninstalling the device and then rescanning. Still doesn't want to cooperate.
Why I want the phone with USB Tethering to work?:
My phone, which supports Wifi tethering, was used quite well for well over a month. This means the battery heated up to too high of temps too often and that means you lose a charge. Now imagine doing that every day, and near the end nearly 3-5 times every day. I'm surprised the battery even works as of now while posting.
Last night, I got the USB Tethering to work on a Windows 7 install on a laptop. Didn't have to do a thing. But I don't have 8GB+ of space for a Windows 7 install! Also, the laptop with Windows 7 on it isn't mine either. Not personalized and wasn't done for me. The phone, I'm just borrowing.
I hope I posted this in the right place. Someone such as myself can get lost in a gigantic forum like this. I have that newbie personality complex. (I pick up all coins/whatever currency used in every game, as much as possible for example.)
Wut do?
Update:
Tinkered with it some more.
Doing what I did makes XP stop screaming about a device that needs drivers when I connect it regularly for charging.
However, I noticed that in the troubleshooting section, it says "This Device Cannot Start."
Not sure what that means.
Nothing in the Event Viewer... Though XP's isn't the worlds greatest for verbosity.
Planning on taking some advice, that I should have already known about, and uninstalling all Android related devices and seeing what happens from there... Once my battery gets high enough to allow it to sit around with no USB cable attached. (I don't have the AC adapters anymore.)
Didn't work. Still same issue. But I freed up 200mb worth of space by uninstalling a boat load of drivers for USB devices using usbdeview.

Easy Tether Pro, $5.00 ? For usb, been using for a long while. Very simple and easy to use. On XP anyways.
Vista sucks, would never let me load the driver. I assume it would work with windows 7.

[Q] Wired tethering on OSX

I've searched and searched, and I hope that someone has figured this out.
Has anyone tethered their Captivate to a Mac? USB tether only please. I know of Wifi tethering, but I like to enjoy my battery when I am done with my laptop.
I have it working in WinXP with Kies, but I would like to get it working on my Mac.
Thanks

Unfortunately, my snow leopard device is DOA right now, so I can't test it, but I think it should be as simple as plugging it in through USB when you have "PC Internet" chosen as your USB settings. I know it works instantly on Linux (without any drivers) and on windows with the drivers installed.
According to most references, a mac doesn't require any sort of "drivers" or kexts to get our phone compatible with it, so I would suggest just plugging it in and disabling your other connections to check

no go, it finds it as a modem, but won't connect... I found something online that said to add settings here and there, but it still isn't working...

Yes, it works on my Mac computer. Either you can configure it with complicated settings without any other software, or you can use PDAnet. You can get it on the market but it is censored by AT&T so you will need market enabler or be in airport mode with the wifi on

[Q] Tethering options for data connection?

I'm looking to understand what options exist for tethering the NC to a phone for data. I believe the only method currently supported is by creating an ad-hoc wifi network using software on the phone, and joining this network from the NC.
I have a Blackberry 9700, which cannot be setup as a wifi hotspot. With the release of CM7 build 17, it sounds like Bluetooth works (with limited range). My phone supports Bluetooth tethering because I've set it up with my Windows 7 laptop. I'm curious to find out whether this will be possible with the NC as well.. if not, what other options are there for getting online with my NC (besides having to purchase a phone that has hotspot capability). I used to use PDANet with a Palm Treo back in the day.. I'm also not opposed to physical cable-tethering if this is a possibility.
Thanks in advance.

I would like to know this as well. My Evo is not rooted and I'd like to keep it that way for now, so my only options are PDAnet via physical cable and bluetooth (which I can utilize on CM7 but it breaks wifi) or Easytether (physical).

neoshi said:
I would like to know this as well. My Evo is not rooted and I'd like to keep it that way for now, so my only options are PDAnet via physical cable and bluetooth (which I can utilize on CM7 but it breaks wifi) or Easytether (physical).
Click to expand...
Click to collapse
So are you confirming that you've got Bluetooth tethering working with your phone using CM7? Does the build break wifi permanently, or is it only during BT tethering?

Haven't tried it yet but now that you mention it.. I'm going to try it!

Excellent, can't wait to hear the results..

Will pair, won't connect
Well, that takes that option out of the running. I really prefer a physical connection though, and so far, I haven't seen any micro-micro (assuming this is because of power requirements anyway).

Even with the phone right next to the NC? That's disappointing.. by micro-micro, are you referring to the type of USB cable needed? I don't have the device yet, so I'm not sure what kind of connections it has available. Tethering over BT is the last feature I'm waiting for before pulling the trigger on this bad boy. I plan to use it as a removable CarPC (using my phone for data and an external Bluetooth receiver for GPS).

Yup right next to it. Now, I've seen some guys report that GPS works though via bluetooth and I plan on trying that next (need to charge my BT receiver.. hope the battery still works!). They said you needed a GPS app to fix your location though.
As for micro-micro, yep USB. But then we would probably need a client side app to be able to recognize that kind of connection.
And wifi seems broken with BT ENABLED (not on, just enabled).. going to revert.

Thanks for doing all that testing. Let me know how the pairing goes with your GPS receiver.. if you get that working, you would need GPS software that has all of the maps built-in (since Google Maps, etc, requires a data connection).
My primary use for the NC will be as a car PC, so the only thing holding me back is the Bluetooth tethering with my Blackberry (uses the Dial-Up Networking feature set).

I've been hoping to BT DUN working for my BB 9700 also. At the moment it appears that ppp needs to be enabled in the kernel for this to work. When I run pppd from the comand line it complains about ppp missing from the kernel.
It looks like the pppd program is being compiled with the CM7 build and that the ppp modules can be found in the kernel sources so there is hope. We could ask to have it added as a dynamic module but I not sure how to go about making the request. (I am a noob to the forums and not allowed post in Dev and there may be a another way to make requested that is preferred in any case. )
I also found this program that claims to set up a BT DUN connection via ppp and it does run without faulting on my NC:
android.gval.biz

Thanks for sharing your experiences. I found a post in the developers forum where someone asked how to do the same thing. The link in the response discusses how to get Bluetooth GPS and WiFi tethering to work, but it does not mention Bluetooth tethering to a phone. Unfortunately, I don't have enough posts under my name to respond to that thread, but I've subscribed to it in the hopes that someone else will point it out..
http://forum.xda-developers.com/showpost.php?p=12282264&postcount=281

Same same same same.
Unrooted Evo and although I am having fun with all the great things we can do to our NC's I am really not ready to root my Evo just yet. Having that phone with me is the only reason I am able to walk away from my keyboard at all and just because you can doesn't mean you should.
I run Fedora on my laptop and can tether to my Evo using Azilink and USB cable without a problem but if I wanted to drag my lappie everywhere then the NC wouldn't be any fun atall!
Weird is when we can pair the Evo and the NC via Bluetooth (yes a few inches apart right now) but neither one wants to do the actual connection. The message pops up on both Evo and NC asking to acknowledge the "secret" code and what else to do but say yes to them both. Then they both try and fail to connect.
I guess there is a fix for AdHoc on CM7 but I am not sure how to get the unrooted Evo to create an AdHoc network for the NC to connect to. If anyone has that answer can you let us know? I will keep searching as well.
Deirdre

[Q] Is there usb tethering available?

I recently got a lumia 822 and would like to use it as a USB connected http proxy. I don't want a full network connection or wifi based solution as I need to keep my computer connected to the existing network but would like to be able to tell Firefox to connect to the Internet via a proxy so web traffic if passed through the phone thus avoiding the internal web monitoring.
I do this via proxoid on my android phone and it works perfect. If there a comparable solution for windows phone 8?
Thanks

The only solution available is TetherX. Its available in the Windows Phone Store. It works via WiFi that's hosted from a laptop and only WebPages work. The only device at this time that supports USB tethering is the Samsung ATIV, using Diagnosis.
Sent from my RM-860 using Tapatalk

That's... not really USB tethering in the usual sense at all (which does exist, at least for the Samsung WP8 phones) but it might be possible. I don't know if anybody has written a proxy server app for the phone yet, but it's a pretty clever thing to do, now that I think about it. The SDK should support it; we can do server sockets just fine. Doing it over USB would be tricky - the phone can do Ethernet over USB, but it's not part of the official SDK - but it might be possible. Setting it up as a WiFi proxy (with some security, ideally...) shouldn't be too hard.

GoodDayToDie said:
That's... not really USB tethering in the usual sense at all (which does exist, at least for the Samsung WP8 phones) but it might be possible. I don't know if anybody has written a proxy server app for the phone yet, but it's a pretty clever thing to do, now that I think about it. The SDK should support it; we can do server sockets just fine. Doing it over USB would be tricky - the phone can do Ethernet over USB, but it's not part of the official SDK - but it might be possible. Setting it up as a WiFi proxy (with some security, ideally...) shouldn't be too hard.
Click to expand...
Click to collapse
Yeah, calling it a tether is not exactly right but I wasn't really sure what to call it. The issue with having it as a wifi spot is that it would be visible. The real reason I was looking for something like this is work has pretty draconian monitoring software. I haven't gotten the phone yet but once I do I may try to look into how the computer sees it when plugged into USB. If the phone can be exposed as an ip (127.0.0.1) via USB then it would seem possible to write an app to open a port and pass the traffic back and forth.
Thank you though.

HT123 said:
Yeah, calling it a tether is not exactly right but I wasn't really sure what to call it. The issue with having it as a wifi spot is that it would be visible. The real reason I was looking for something like this is work has pretty draconian monitoring software. I haven't gotten the phone yet but once I do I may try to look into how the computer sees it when plugged into USB. If the phone can be exposed as an ip (127.0.0.1) via USB then it would seem possible to write an app to open a port and pass the traffic back and forth.
Thank you though.
Click to expand...
Click to collapse
First, I don't have the phone yet so all of these ideas are just wild speculation but at quick glance the program ipoverusbenum may help in a USB proxy solution. without a way to do this, I'm stuck with my old android device.