Database Develop

Problem with Rom Upgrade with Windows Vista

Anyone got any problem when upgrading Rom on WIndows Vista and using the Windows Mobile Device Center instead of the traditional ActiveSync? It won't seems to connect to the device again once the device is restarted into the RGB screen [after the starting the Rom upgrade process]. After a few seconds, it got the connection error code on your PC. I soft reset the device and no upgrade has been installed. Any ideas?
I try removing the connect via USB check box and use Mtty to check the connections to my device. But after I have done that, the PC won't connect my device to my computer at all... hence, I can't get use Mtty to check the connections.
So I have no idea why this is happening on Vista. It works fine when I am using my old XP computer when I upgrade to the test ROM. Any suggestions will be appriciated. Thanks a lot of your help in advance.
Pete

http://www.modaco.com/Upgrading-to-Vista-Be-aware-RUUs-wonand39t-work-t251768.html
Looking to upgrade to Windows Vista? You might just want to keep an XP partition on your machine, as ROM upgrades via the normal RUU client do NOT work from within Vista, due to changes in the way the OS accesses the device. This also prevents IMEI-check unlocks from working on Vista.
Click to expand...
Click to collapse
Problem lies with vista, but I have read somewhere a solution is underway, or allready here...

I Can't Upgrade my device

Heloo every one ... i'm tired from this pda p3600 ... since 4 day's i wanna to upgrade my rom from wm5 to 6 & the upgrade process didn't work ... i try everything .... but non is work ...
first i was trying to make upgrade through windows vista home premium but didn't go well & this is the photo for my problem :
http://www.freewebtown.com/Haitham/CIMG0511.JPG
http://www.freewebtown.com/Haitham/CIMG0512.JPG
http://www.freewebtown.com/Haitham/CIMG0513.JPG
http://www.freewebtown.com/Haitham/CIMG0514.JPG
http://www.freewebtown.com/Haitham/CIMG0516.JPG
then i try to upgrade through my freind windows xp ... and also didn't work good .. the error message say that the phone is unable to upgrade do u rom flash or something like that ... so i try to instal the unlock & also same message ....
i'm in **** mood ...
any one can help me please

Until the new version of WMDC is released with fixes, I suggest you use XP computer to do upgrade.
New WMDC v.6.1 coming soon: http://windowsvistablog.com/blogs/w...ows-mobile-device-center-6-1-coming-soon.aspx
The XP computer needs to have Active Sync 4.5 installed. Reboot xp computer before starting, to clear any existing syncs. Delete current sync profile on Trin. Connect to pc via usb as usual, let ASync run, but cancel when it tries any profile, you are left as: Guest sync
You should be connected now. Upgrade rom file should be extracted in explorer, e.g., so you can see all files. Run RUU wrapper or ROMUpgrade exe, depending on rom you're using.
If you go through process, & get error message. Don't disconnect Trinity. Close that page & start again. It should work the 2nd time. When it's working, you will see the boot screen, color bars & at bottom usb notation. (If it says serial, you'll have to, unhook usb connection, reboot computer, re-sync to guest status, & start again.) Then the update screen on Trin will show % bar, if process is working correctly.
If you still get error message, then check Trinity Wiki info as rom upgrade problem FAQ is there. I'll assume your Trin is unlocked. Check boot screen on Trin to see boot loader info. Wiki explains how.
Also: Use SSPL software Bootloader solution from "Des" - this loader ignores the CID and the upgrade will work also with wrong CID. See also http://forum.xda-developers.com/showthread.php?t=293632
If you still have problem, come back here & give info:
1. What rom is currently on Trin? What radio?
2. Did you buy an unlocked Trin? Exactly, what device do you have?
3. What wm6 rom do you want to upgrade to?

D810 w/WM6 upgrading fail, error 260

I've spent whole day reading through the froum and the trinityguides.info site but can't find any proposed solution to work for my situation.
Device info:
ROM version: 3.00.707.17 (WM6)
ROM Date: 6/29/07
Radio version: 1.46.00.11
I've tried using all 3 versions of hard-spl but they all end up with the same result. With active sync linked and ready, ran the "romupdateutility.exe" at the end the PDA prompts if I want to run the "enterbootloader.exe", the moment I press yes the active sync connection would drop and eventually the program timed out with error "260" while PDA stuck in the tri color screen displaying the following:
TRIN100
SPL-1.07.ds
I've found some similar problems in the forum but those users are using vista however I am running XP sp3 in this case. I've tried all other solutions in the FAQ areas but none of them works.
My unit came with the WM6 already but I just want to upgrade the radio and get some cooked ROM to get faster performance. What am I missing here?
Any help is appreciated.

Once it drops to the tri-colour screen and is in bootloader, run the RUU again. Should be all that you need.

I've tried running it over and over but on the bottom it just kept on saying "serial" when it suppose to say USB.
Anyways, problem solved and it turned out to be the cable. For some reason the cable is good for anything, except keeping the phone connected/recognized while in bootloader mode.
I think this should be listed as one of the FAQ in the trinityguide. This might be a rare problem but it surely took me a lot time to figure out.

on Vista
Hi,
I have similar problem but I'm using Vista (Business). Is there any workaround ?
Regards,
Daneal

Hi
I have the same problem
spl 1.20 Olipro display serial instead of usb
I tryed several usb cables and still the same
when trying to update the rom it refuse to connect the ppc and end displayng the 260 error no connection
My system is vista and the first time I upgrade everything was fine, I followed all tutorials and no problem at all.
Do you think that could be this new 6.1 Mobile device center I recent install the cause?
best regards
Inabox

The problem isn't the WMC as such more the fact its Vista. Find an XP PC and do it from there.

Hi there, I had the same problem just now and cured it(in Vista). Just upgrade the htc driver in device manager again with "wceusbsh.inf" previous file, then should be ok. It seem to be Vista replaced the driver during it switched to Tri color menu.....

Windows Mobile device center problem

After Flashing the latest Hyperdragon III rom I can't set up a partnership between my kaiser and the device center anymore.
Anyone else having a similar problem?
I tried flashing back to my previous rom and it won't set up either.
Everytime I click on "set up your device" I get the following error:
There is a problem with your connection. Please disconnect and reconnect your device and try again.
I tried reconnecting, using another usb port, reinstalling the device center, removing every trace I could find about my kaiser in device manager.
i'm running vista x64 and the latest device center I could find on microsoft site.
my kaiser has hardSPL 3.29.
I don't have any other problem with it, I can transfer files in the device center when I "connect without setting up my device"
anyone who can help?
thanx,
Bonusbartus

you might want to go back to device center 6.0 6.1 gave me nothing but errors.

Thanks, can I use the 6.0 device center version with 6.1 wm roms?
I installed 6.1 because it was on the cd packaged with my TytnII (wm6.1 rom already installed)

Well, it works, don't know why or how, i think installing the 6.0 version helped, thanks

Has not worked for me. I have tried both WMDC 6 and 6.1 and I still cannot get my Tilt to connect with WM 6.1 on Vista 64

Upgrading to WM6.5 on XDA IIs - Error 150 Maupgrade

Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!

please add which rom you currently use, do you have activesync installed

Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !

Sorry !
Yes I have Activesync installed (for another palmsize divice).

What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.

Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.

night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.

Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP

All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.

you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync

Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.

For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5