Related
So today i finally get the gusto mod my phone Android Dev 1. After downloading all the files and following the instructions here i can't get past the black g1 screen (#8). note i can also get the the rgb screen. thats it, but with so many different posts with similar issues, my brain is pounding. At this point if i can get beack to factory, ill live. what i'll hate is the fact that bricked my phone. i'll most likely get screamed on for not searching, but i think i may be searched out. any help would be appreciated.
thanks.
docfu.
first of all dont freak out lol. Download the dreaming.nbh or w/e file from the rooting instructions and place it at the root of the sdcard. Then get into the rgb screen (Camera + Power) and flash it. That should get you back to factory settings. If not, download the update.zip for w/e region you are in place it on your sd card. Enter recovery (Home + Power) and flash the update.
ok...so i tried the DREAMING file and it kept turning up no image found, alternatively i'm not sure what you mean by w/e region update. i ihavent come across that in my searches.
ok dreaming file did infact work. i feel better knowing that the phone isnt bricked. however after running the update when it prompts for action, i hit the trackball and i'm right back at the rgb screen..AGGGHHHH! sorry. i've been at this since 3pm this afternoon.
Chill. Don't freak. You can't just jump in and do something as soon as your read it. Read the whole thing and if you don't have the patients for this work on that before you work on this. bbreath.
I must say start by saying thanks guys. i stepped back, and actually took my [email protected]@ to bed. Rest does wonders. That said. I've accomplished the factory reset. so i back to a stock g1, and boy does it suck. As stated my phone WAS a dev 1. i've already started the upgrade process, my question at this point is where do you recommend i go from here. back to dev 1 or try one of the other roms. i've already installed the spl, and right now im stuck at the telnetd part of the root process. and this too may have me screaming by the end of the day...
any thoughts would be appreciated.
After the recovery image is installed you need to update the radio if you want to install a cupcake 1.5 ROM. You can get it here, rename 'update.zip', place on the SD card and boot in to recovery and flash. Then flash a ROM of your choice. You should be able to do that on RC 30, but I'm not sure if you need to install a rooted image first, so I'd wait for someone else's input before trying that.
I played it extra safe and used the rc29. as far as i know the proper radio is installed. i'll wait around before i do something stupid. thanks for the input tho. i'm trying to learn everything.
ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.
Future reference ^-^
In case you encounter this problem in the future, cause it can happen with flashing new roms if you skip a step:
You're only bricked if you are stuck at the G1 boot screen but can't get into recovery or fastboot, adb or anything. In cases where you can still get to other phone options to start over, rest assured your phone does still work, just need to step back and figure it out, which you did in this case with a little help ^-^ First few times doing anything to my phone, I went into panic mode a couple of times thinking I bricked until I read around and found out otherwise.
Just in case you didn't know these things, if you did, well, hope it was a nice read? ^-^
doctorfugazi said:
ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.
Click to expand...
Click to collapse
Well... if you actually purchased a dev phone it should not be sim locked.
Technically... after the rooting process, we all have dev phones with the exception of the sim lock.
So... what SPL are you using?
What ROM are you trying to install? Some roms you should consider partitioning your sdcard.
What radio do you have?
First thing is first.
Get the 1.4 recovery if you haven't done so already. 1.4 Recovery
Because this allows you to select any .zip file without having to rename it to update.zip. This saves on confusion so you don't try flashing a spl (like danger spl )before a radio (could brick your phone).
Second
You need the 1.5 radio to use cupcake. 2.22.19.26I
Third
Consider an spl. You have 4 choices. HARDSPL (Recommended), Eng SPL (what the dev phone defaults with.. skateboarding androids), the standard spl (nondev) and Danger SPL (risk bricking but worth it because you have more memory for your ROMs and can try HERO builds).
Fouth
Find your rom. NOTE: Read each post carefully! If it says you need a specific spl then get it! Otherwise it won't work. Some require the Danger SPL. If you chose a JF rom then you should be alright and don't even need to partition your card and it will work just like the OTA release. Some (such as Cyanogens 3.9.7) are experiemental and are not recommended for noobs.
Fifth (and probably the most important)
ALWAYS BACKUP WITH NANDROID!!!
In the event that you think that you've bricked your phone. I would say that there is a 90% chance that you didn't. As long as you have a nandroid backup and can get to the bootloader then you still have a phone. Just make sure the fastboot.exe file is in your sytem32 directory of your computer. Open CMD and cd to your fastboot backups saved on your computer. Simply
fastboot flash boot boot.img <enter>,
fastboot flash system system.img <enter>,
fastboot flash userdata data.img <enter>
fastboot reboot <enter>
and you should be back to where you were immediately after the point you backed up. Think of it as a system restore for Windows. It couldn't hurt to have a few backups stored.
If you have any questions or problems include information for us to read in a single post and edit as necessary.
Example:
AT&T
Cyanogen 3.9.7 Rom
Recovery 1.4
HARD SPL
Radio 2.22.19.26l
8GB class 4 sd card (7gb fat32/900mb ext3/100mb swap)
Theme version if any.
That way we know what we are working with.
Happy flashing.
rest assured i was in panic mode yesterday. but honestly the only thing i could really do was just step back for a while, meaning get some rest tackle it with a clean head. its frustrating for sure. this one guy tho who posted in the brick think tank thread...just cuz he couldnt figure things out in an hour he got pissed and started screaming waste of time this that and the other. total BI$CH! I was like whoa. I was at that point too. but Im not tryna be that guy.
Now, if could just figure out if i have to start from scratch, i just might be able to get my phone working again in time fro me to go to work tmrw morning.
So... what SPL are you using?
the hard SPL found here
What ROM are you trying to install?
Well i was trying to follow suggestion on something simple, like one of the early jesusfreke's. if i can step it up sure why not. but i'll pass on the partitioned sdcard setup for now.
actually I'll run with JesusFreke JFv1.51 US CRB43
What radio do you have?
radio number listed in my previous post.
Hey thanks by the way for taking the time out of your day to respond to this. i know u guys get your fair share of spazmiesters, so i appreciate it totally.
after doing research it seems that all the current roms require partitioning. or is that optional just for running apps to sd?
partitioning is optional of apps2sd for preformance. some like myself have three partitions, the third being for a linux swap
Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)
doctorfugazi said:
Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)
Click to expand...
Click to collapse
Okay... you have the recommended recovery and spl.
So all you need to do is get your rom and radio and store the zip files to the root of your sdcard. You don't need to rename them.
Just boot in recovery (power+home) and scroll down to:
[Alt+A] apply any zip from sd
And then you should see the zip files.
Upgrade your radio first.
Then your rom.
Another note... make sure you have a data plan once you've installed your rom. Depending on your rom version, you may not be able to sign in without one. If you can't sign in, you can't use your phone which is why most would recommend a custom rom or an adp rom.
Now... if I'm not mistaken... you do NOT have to partition your sdcard to install a rom (unless it's a HERO rom).
You may want to consider doing so however.
The advantages are that you can have virtually unlimited storage for apps and it's much easier to restore them after a wipe because they are still on your sdcard. Some apps will recognize the partitioned sdcard and automatically do all the apps2sd work for you by default. It is also recommended that you use at least a 2gb class4 card at MINIMUM. Any slower then a class 4 may result in system crashes and errors. Any less then a 2gb card is almost not worth all the effort since you'll likely be using at least a quarter of it for the apps2sd. I would suggest buying at least a 8gb class 6 card for less then $50 online. It's both fast and plenty of storage. With apps to sd, if you do need to wipe you still have all of your apps installed. A great advantage of having apps2sd.
Also... try different roms! There are DOZENS out there! Some have the htc music installed, some have myfaves, some have special cameras, etc. Don't be afraid to experiment. As long as you have a backup and can get to the bootloader (skateboarding androids) and a pc, you can't go wrong! If fact... with the 1.4 recovery you can store several different roms on your sdcard, backup your current rom, wipe, flash a new rom to try it, wipe, flash a different rom to try that one, etc. If you decide that you didn't like any of those... just restore back to your previous backup. Simple as that. No pc needed. However having a pc is handy to get logcat information if it's not booting for some reason.
Speaking of roms not booting... while your experimenting with various roms... you MUST have patience. Sometimes (based on my personal experience with about 10+ different roms) they can take up to 15 minutes to boot up. You can literally be staring at the ANDROID or HTC logo this entire time. Unless you are using ddms.bat or adb shell logcat, you will be clueless of whats going on. DO NOT do anything unless you get the infamous "boot loop". This will be obvious. It will stick at the ANDROID or HTC screen for a while and then blink and go back to the logo. If you see it blink and go back to the logo then try pressing power + talk + menu to restart it and then immediately press the home button to bo back to recovery. Wipe... try again. This time it should work. If it doesn't then restore your backup while you research on that partitcular rom. You may have skipped a step or not have the proper requirements (partitioned card, spl, etc).
With all of that said... good luck and you'll be posting help to other users like yourself before you know it.
Hey Doc, if I'm not mistaken (other guys correct me if I'm wrong), if all, and I mean ALL you have is a boot loader (AKA SPL. ie// skating androids or colored bars) you need to reflash dreaimg.nbh to get a system back.
This ALSO flashes your SPL and RADIO back to default so reflash your radio and SPL afterward. (IN THAT ORDER I HOPE)
Binary100100 is a gentleman and a scholar
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.
innerspace said:
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.
Click to expand...
Click to collapse
Thank you! I do what I can.
I've been on XDA today for atleast 3 hours and havent gotten anywhere, I have owned my G1 since dec. 08, rooted it, and kept the firmware at 1.1. I have jesus freak recovery 1.41.
Like I said, I've been on XDA forums for 3 hours already and haven't had any clarity what so ever and am just frustrated right now. Without being 100% I managed to upgrade to 1.6 withy cyanogen 4.2.15.1 I lost everything that was on my phone, it hurts but I'm just frustrated to the point right now that the phone is functioning slower than before and theres lag between the screens and functions. With the upgrade, all of the phones original fucntions "contacts, alarm clock, calculator, etc." force closed and nothing worked, i tried to factory reset and because of the stupid sync issue from the begining skrewed me and about half of my info saved to my google account. I'm so frustrated right now.
I need to know how to install the newest recovery to hopefully work with Nand because I had to Manually rename the DRC83_base_defanged to update.zip and then had to manually rename update-cm-4.2.15.1-signed to update.zip to install each one at a time without having the ability to freely choose what zip i wanted to install.
I haven't been able to find what issues there are with using another phones firmware on the G1, i've seen the Hero firmware, the home screen looks gorgeous and runs like a dream, but I haven't been able to find anything saying that it is okay or a BAD idea to attempt to install it, also I havent been able to find any info on finding the newest g1 firmware or any mods to be able to make the g1 firmware look like the hero, or any other android platforms. I have just found constant cooked firmware after firmware with a hard time decyphering why one may be better than the other. If someone could help me, I would GREATLY appreciate it.
I continute to run into threads "how to root" or "down load this, and download this, and assuming you have something with options you dont have, make it work like this"
Please someone help.
First you need to upgrade your recovery b/c the one you have is very very Ancient with a capital A....You have to wipe before you flash the defanged then flash cyan w/o rebooting.
I want to upgrade my recovery, but I haven't found anything that can help me upgrade the thing. any links to tell me how to do it? and is there no order that I have to install the firmware? instead of having to go from 1.1 to 1.5 to 1.6, can i just go from 1.1 to 1.6 in one hit?
step 1: search the development forum for amon ra's recovery. read the instructions to flash it.
step 2: go to cyanogenmod.com and read the instructions for upgrading from scratch.
once you've done those two things, you'll be much happier.
maniacallyhappy said:
I want to upgrade my recovery, but I haven't found anything that can help me upgrade the thing. any links to tell me how to do it? and is there no order that I have to install the firmware? instead of having to go from 1.1 to 1.5 to 1.6, can i just go from 1.1 to 1.6 in one hit?
Click to expand...
Click to collapse
You don't re-root when you need to change roms you just wipe in recovery mode
You need amon_ra
http://forum.xda-developers.com/showthread.php?p=4647751#post4647751
Like the other guys have said, upgrade to Amon_RA recovery. This allows you to flash updates from any filename, not just update.zip. The link is in my signature, or it's on the G1 Dev Forum in the sticky threads.
After that, boot into recovery and go to the Wipe section. Wipe all the things there, not just data. I never used to wipe everything either and I found that was the source of alot of my problems when changing ROMs. Obviously if you have your SD card partitioned and you choose to wipe your ext then you will lose what is on there.
Cyanogen has good instructions on his Wiki, but basically you want to flash DRC83_base_defanged, DO NOT reboot, and flash CM over the top straight away, then reboot your phone and you'll have a nice clean CM install.
This flashes the HTC Developer image which includes legal Google apps (Gmail, Maps, etc) and then flashes CM over the top which includes all his cool changes but does not delete the Google apps which we aren't supposed to distribute because it's illegal. Perhaps you are not aware, but Cyanogen got a Cease & Desist letter from Google, which is why we now do the defanged base method. More ROMs are moving to this method as time goes on, Pay's ROM and Super D are two which do this.
As an aside, I have found CM is not the fastest ROM. Some people have had better success with a ROM called Super D which is quite popular and includes many of the Eclair bits and pieces which CM does anyway. I personally use Dwang's ROM which is a much more plain Donut image however it absolutely flies. Both of these are linked in my sig, and are usually within the first few pages of the G1 Dev Forum anyway.
Thank you guys so much! I really appreciate how helpful the community has been. I've been having some issues with the the upgrading and maintaining because of my memory card slot dying out. A lot of the times the system will not register that I have my micro sd card in it or it'll say the sd card is blank. I just hope the phone lasts the extra 6 months till the end of my contract
Sent from my T-Mobile G1 using XDA App
maniacallyhappy said:
I've been having some issues with the the upgrading and maintaining because of my memory card slot dying out. A lot of the times the system will not register that I have my micro sd card in it or it'll say the sd card is blank.
Click to expand...
Click to collapse
I used to have this problem too, but it went away when I moved to 1.6 (coincidentally the same time I replaced the SD Card that came with my phone with a new Class 6 card). So either the upgrade of the OS or the SD Card fixed it.
In going to have to try the new men card cause the system is already at 1.6 but the phone is still trying to kill itself.
Sent from my T-Mobile G1 using XDA App
hi
i'm a complete novice. i got a local shop to root my t mobile g1, which they have done. The reason i wanted this is so that i could wifi tether it. however they were unable to get this next step to work. i have tried it at home through watching you tube and looking at sites like this - but no luck.
I'm seriously thinking of going back to where i was ie put it back to 1.6 and forget the tethering part. can i do this on a rooted phone, i wish i never rooted it. it cant even find linda file manager in the market anymore.
please help
i am on firmware version 1.0. any help would be appreciated. i guess i shouldn't have got involved in stuff i didn't understand!!!
singingauditor said:
hi
i'm a complete novice. i got a local shop to root my t mobile g1, which they have done. The reason i wanted this is so that i could wifi tether it. however they were unable to get this next step to work. i have tried it at home through watching you tube and looking at sites like this - but no luck.
I'm seriously thinking of going back to where i was ie put it back to 1.6 and forget the tethering part. can i do this on a rooted phone, i wish i never rooted it. it cant even find linda file manager in the market anymore.
please help
i am on firmware version 1.0. any help would be appreciated. i guess i shouldn't have got involved in stuff i didn't understand!!!
Click to expand...
Click to collapse
First you should always do your own work so you understand whats going on. if your still on 1.0 you need to update to a newer firmware (at least 1.5 or 1.6 or even jump up to 2.1). Thats prolly why your not seeing certain things in the market and why wifi tether isnt' working. That shop sounds like they don't know what they are doing.
i know. leave things if you dont understand them. lesson learnt. how do i get back back or should i get an expert to get me back to 1.6?
singingauditor said:
i know. leave things if you dont understand them. lesson learnt. how do i get back back or should i get an expert to get me back to 1.6?
Click to expand...
Click to collapse
Well techincally the "hard part" is done. All you need to do is find a rom that you want. Cyanogen has a stable 1.6 build that you can run. Just put the .zip on the sd card and flash and everything will start working. Let me know if you need any details on how to do anything.
hi
Cyanogen has a stable 1.6 build that you can run. Just put the .zip on the sd card and flash
thanks for the advice. sorry to be dum. So a ROM on a G1 is like an operating system? So if i put on Cyanogen it will allow me to upgrade to 1.6. When you say put the .zip on the sd card you mean there will be a file called cyananogen.zip that i will have downloaded. Put it onto the SD card, and by flash you mean run the file?
sorry but all this terminology is new to me. ROM in my day was read only memory.
grateful for any simple instructions. thanks in advance
singingauditor said:
hi
Cyanogen has a stable 1.6 build that you can run. Just put the .zip on the sd card and flash
thanks for the advice. sorry to be dum. So a ROM on a G1 is like an operating system? So if i put on Cyanogen it will allow me to upgrade to 1.6. When you say put the .zip on the sd card you mean there will be a file called cyananogen.zip that i will have downloaded. Put it onto the SD card, and by flash you mean run the file?
sorry but all this terminology is new to me. ROM in my day was read only memory.
grateful for any simple instructions. thanks in advance
Click to expand...
Click to collapse
First install this recovery (all the instructions are included)
http://forum.xda-developers.com/showthread.php?t=566669
Then here is the thread for cyanogen's stable build with installation instructions
http://forum.xda-developers.com/showthread.php?t=567610
And if you want to jump to a 2.1 firmware here's his that runs great
http://forum.cyanogenmod.com/index....c-would-you-like-a-pony-v507-test5-05132010/?
But basically you'll download his file which will be a zip file (don't matter what its called) and put it on the root of the sd card (in no folders), turn the phone off. Start the phone in bootloader mode (home and power button, hold the 2 buttons in until you get to your recovery screen and then just flash your zip file.
And I'm like you I don't like calling them rom's either, I'm not real old but older than most on here. But everyone calls them rom's. I'd rather just call them builds. Let me know if you understand everything.
I'm having a lot of issues with my phone running horribly and whenever I plug it into my computer it tells me that my internal storage needs to be scanned and fixed. So either my card needs to be formatted or it's going bad. I'm assuming this could also be the cause of my phone some time taking ~10 minutes to turn on. So I have a few questions:
1) can I completely format my card and still have stock experience for exchanging it? *I went ahead and did this because I'm impatient. seems to be working and I'll keep testing it and go from there*
2) I did root and flash custom roms on it before but the rom i'm running now is a flash of the original rom on my phone but rooted. Then I updated to JH7 and it got rid of the root. When I went into the store previously and had issues with it, the guy mentioned that I had a different IMEI from what they had registered. I'm not sure if this is due to the fact of flashing or if it's from having to get the first captivate exchanged for another one. Are there any steps I can take to ensure that everything is in correct order and there's no way to see that anything has been tampered with.
Any other advice on things that should be done before going to a ATT warranty store would be greatly appreciated.
Mantu13 said:
I'm having a lot of issues with my phone running horribly and whenever I plug it into my computer it tells me that my internal storage needs to be scanned and fixed. So either my card needs to be formatted or it's going bad. I'm assuming this could also be the cause of my phone some time taking ~10 minutes to turn on. So I have a few questions:
1) can I completely format my card and still have stock experience for exchanging it? *I went ahead and did this because I'm impatient. seems to be working and I'll keep testing it and go from there*
2) I did root and flash custom roms on it before but the rom i'm running now is a flash of the original rom on my phone but rooted. Then I updated to JH7 and it got rid of the root. When I went into the store previously and had issues with it, the guy mentioned that I had a different IMEI from what they had registered. I'm not sure if this is due to the fact of flashing or if it's from having to get the first captivate exchanged for another one. Are there any steps I can take to ensure that everything is in correct order and there's no way to see that anything has been tampered with.
Any other advice on things that should be done before going to a ATT warranty store would be greatly appreciated.
Click to expand...
Click to collapse
1) yes
2) Flash back to 2.1 using ODIN and you should have everything stock including your IMEI. Not JH7 but JF6.
Hopefully you backed up your stick settings prior to flashing. Sine custom roms change your product code and imei. Flashing with ODIN will not fix the product code. I'd the imei is correct I highly doubt that the tech and the DSC knows about checking the product code but you never know. Search around XDA there has been plenty of posts surrounding this topic.
Sent from my SGH-I897 using Tapatalk
Sprint Hero
8gb new SD card
Was rooted to a cyanogen mod 6 (???)
The other day my sd card needed to be replaced. This card had my backup info on it, but became corrupted. I tried using various utilities in Win7 to try to fix the card, but had no success. Somewhere during the process of everything, I must have erased/corrupted the info on the phone itself, as it will no longer boot.It just freezes at the HTC screen.
I am trying to flash a new rom to the phone via the sd card using the hboot method. I have tried various roms, and had one actually start to install itself, but at the end it said the system info is older (not sure of the exact words) and would not proceed. So now I am stuck in what to do.
I want to get my phone working. I don't care if it is the basic stock OS, or something better at this point, as I can mod it once get it up and running. I am able to get to the clockword recovery prompts (if this helps any).
Any help in resolving my problem would be appreciated! Specific steps would even be better
I can't stand being without a phone... and this is driving me crazy!
U still have a recovery on ur phone?
Sent from my HTC Hero CDMA using XDA App
i have clockwork, if that is what you are referring to???
Run the RUU from bootloader and restore to factory. Re-root and you'll be good to go.
If you still have Clockwork recovery you can flash a new ROM from there and the problem should be fixed as well.
Is this a new ROM you are working on?
Thank you.. I think I have it working again.. I downloaded a rom from this link... http://forum.xda-developers.com/showthread.php?t=581521 and it booted back up....
so, if I want to go to a different rom, say CM 7, or even a different one all together... I can do it from here using rom manager, right ??????? Thanks for your help!!!!!
Did you make sure you were fully charged. My phone sometimes refuses to get past the white HTC screen. If I make sure it's charged and sometimes I pull the battery and just let it sit. I always boots. It never did this on any rom previous to gingerbread. I would do this before spending an hour or two rru'ing or reflashing. My phone didn't seem to like the cwr 3.0.0.5 either, lots of booting issues. I had to downgrade back to 2.5.whatever. Looks like you got it fixed though.
Sent from my HTC Hero CDMA using XDA App
Moved to Q&A...