Hello to everybody,
hope i´m in the right forum, if not -> admin please change.
Well back to my questition, right now i´m on the stock rom (german version ),
i got bbconnect running, but i´m wanted to change my rom to figure out what
is out there in world
Problem:
I believe i´m albe to follow the guidelines for flashing my HTC HD with a new rom,
but what i´m not aware is, which ROM i could use ( maybe with wm 6.5.. ) for working ahead with bbconnect.
Reason: bbconnect is a must, due to the fact that i use it in our compay.
I would appreciate some suggestition on which rom bbconnect is running straight, and maybe ( that would be the optimum ) also the mail preview at htc sense is working.
Or would the forum suggest ( maybe due stability points of some roms ) to stay on the stock rom.
Thansk for supporting me and helping on that issue.
Regards
Howie1969
i've installed the latest version of bbconnect an my sense 2.1 rom!
the installation was successful! but i wasn't able to test a connection because i had no server to connect with!
Related
Hi all,
sorry for the newbie question but I'm thinking about upgrading my Trinity to WM06 and wondered if anoyone could answer some basic questions as I'm a bit confusted (... not that techie I'm afraid)
1. As my device is a SIM free, non network attached HTC P3600, do I need to do any of this "Hard-SPL" upgrading before selecting a ROM
2. is there a simple step - by - step flashing guide for newbies like me anywhere
3. Do the ROMs provided here enable SDHC for the device. I want to use higher capacity mini SD cards - this is a really important requirement
4. I love the inbuilt GPS and Tom Tom solution - are there any issues with GPS/Tom tom support in the upgrades
Many thanks in advance
Coe
coe62 said:
Hi all,
sorry for the newbie question but I'm thinking about upgrading my Trinity to WM06 and wondered if anoyone could answer some basic questions as I'm a bit confusted (... not that techie I'm afraid)
1. As my device is a SIM free, non network attached HTC P3600, do I need to do any of this "Hard-SPL" upgrading before selecting a ROM
2. is there a simple step - by - step flashing guide for newbies like me anywhere
3. Do the ROMs provided here enable SDHC for the device. I want to use higher capacity mini SD cards - this is a really important requirement
4. I love the inbuilt GPS and Tom Tom solution - are there any issues with GPS/Tom tom support in the upgrades
Many thanks in advance
Coe
Click to expand...
Click to collapse
Hey there, coe62!
I'm not a techie myself, but have just recently flashed my Trinity for the first time to WM6, so most of your questions were mine also. Here:
1. yes. From what I understood, also protects your device from a bad flash helping you recovering it (as far as I know, there are three of them: OliPro's HardSPL 1.30, OliPro's HardSPL 1.20 and Des' Crash Proof SPL)
2. http://www.trinityguides.info (thanks to racerx_)
3. some of the do, some of them don't, check here for details: http://forum.xda-developers.com/showpost.php?p=1635483&postcount=5
4. using iGo, so I can't tell!
Best of luck!
iGo
hi tnyynt,
i've seen u are using iGo, and also seen the small flag in the corner....so let me say first "salutari". as i'm new user of a trinity and have the german wm5 (my german sucks), i will flash it to wm6 english but i don't know if iGo is working with wm6. is it iGo os dependant?
thks!
mardare said:
hi tnyynt,
i've seen u are using iGo, and also seen the small flag in the corner....so let me say first "salutari". as i'm new user of a trinity and have the german wm5 (my german sucks), i will flash it to wm6 english but i don't know if iGo is working with wm6. is it iGo os dependant?
thks!
Click to expand...
Click to collapse
Hey there!
YES, iGo works very well on both WM5 and WM6. I had it with the stock WM5 and now using it with a cooked WM6, it works great on both operating systems.
Noroc!
hi there
Am as a newbie as well, lately i've been tried flashing pretty man ROMS over Trinity Windows Mobile Section 6, and find out some ROMs are really good, smoothness, fast and damn good performance, or you can try Mary(latest ROMs). Personally, after trying cooked ROMs, i found Only _AX3L_WM6_WWE_v3.1.2c FULL & LITE (25-10-07)
This ROM is simply an edited version of the Official DOPOD's ROM (lastest released version!) for the Trinity work on my DopdD810, what i mean is with this ROM i can get connected with Internet, but rest of other ROMS don't, i've no idea Why, i am from Hong Kong, somebody has idea due to connection to the internet??
Ok, due to my bad understanding which SDHC would be most suited for my device? As i read about
http://forum.xda-developers.com/showpost.php?p=1635483&postcount=5
for ROMs flashing i follow the instructions, so far without serious errors happened, i'd to thank all of you, no matter newbies, seniors, moderators...
hi!
that's great, thanks. hopefuly i'll have time in week-end to play around and flash it!
numai bine!
Well i use this thread to post some of my questions...
i get my p3600 tomorrow and i'm very excited, so i want to flash the WM6 from bepe.
1. is there any way to backup the factory-flashed rom?
2. do i lose the warranty if i flash the device? is there a workaround?
3. I've read a few threads but i cant get an idea whats this hard spl for?
4. is it possible to reset the p3600 to factory default so may i can get warranty if somethings fails?
thanks for the replies..
Hi guys,
I want to upgrade my phone to one the WM6 roms available in here.
I just wanted to ask will the sms / email / mms settings stay once the new ROM has been flashed.
If not where can i find them to write them down.
Thanks in advance.
no, they will be erased...
take a look at the trinity upgrade guide on trinityguides.info which will take you step by step through flashing your ROM (backup, hard spl, flash ROM, restore, etc)
Erase the ROM before installing?
I heard it's better to erase the ROM before installing a new one.
A kind of a 'super' eraser to clean deply the ROM. Have you heard of any of such a program/utility?
Thanks
connetion problems
hi
i tried to get all steps like on trinityguides.info but always the same sh....
ERROR[260] : CONNECTION
1.the USB cable IS connected to PDA
2.also at hte PC
sync is done and i get always the same, doesn´t mater what i try
- HardSPL
- ROM flash
has anyone an idea? i just want to have a german wm6 on my 3600. later on a can install TT on the "normal" way.
thx for any help
Hi All.
So here we go again - trying to get Blackberry Connect to work on a new device..... so we've succeeded on the Kaiser and Touch Dual with both original and cooked rom's but I can't get any version to work on the new Diamond - received mine yesterday after frying the mini usb port on my Touch Dual and its one of the 1st things I installed? I've tried all the current fixes (I think) most of them summarized here in Elec.Two's post:
http://forum.xda-developers.com/showthread.php?t=371652
I'm hoping there will be a few others out there working on the same problem - I've just changed my aku back to .1.1.4 - I can get the device to sync when connected using activesync as a pass-through connection but get the "old" data tunnel available message and then it flips to "not connected" .....
I'll keep trying and keep this thread updated but could really use some help!
Hi, Im trying to change the name of this. I would like to change it to HTC-Herm200 or someting else. But I dont know what the build number have to be there. Anyone know ?
this has NOTHING to do with rom development... use some sense people! moving thread!
ROM Development????
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
I currently have WWE_1.34.831.1_52.24.25.08_0.93.25 loaded and have tried the standard "Tweaks" from past "ROM Development" but none have worked so far? I'm on constant watch for another ROM release (Cooked or Stock) or a Registry fix to help solve the problem?
ShogunMark - do you really think the thread was in the wrong place???? If its not ROM development then I'm in need of some guidance?
Im tying to change in HEX Editor the Signatures. For example there are DIAM100 (or DIAM10000) and build 19588. I changed it to HERM200 and 19588->17745. I can change it without changing the size of .nbh. But thre are "Diamont" Signatures too and by changing Diamong->Hermes wir have one less character (7->6). It changed the size of the .nbh.
So im trying to flash it to the Diamond nad about 96% OK, but then ROM flash error.
A meaning of it all is that it have to work, because RIM asks the Number and NAME and then when its in the list->OK, NO->pending.
I need some tools like SSPL 1.34 and ROMUpdate Utility that dont asks of CRC or something else.
Please Help
I've seen a few members reporting that they have a later ROM version > 1.35.707.3 - See thread http://forum.xda-developers.com/showthread.php?t=394985&page=12 I have not been able to find this as an officially released ROM and I'm not aware that its been dumped as yet? This slightly newer ROM may help solve the problems and may help usap with his question on the version number?
If there's anyone out there who know's the AKU and the version number for ROM 1.35.707.3 can you let us know???
Thanks
Blob8me said:
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
I currently have WWE_1.34.831.1_52.24.25.08_0.93.25 loaded and have tried the standard "Tweaks" from past "ROM Development" but none have worked so far? I'm on constant watch for another ROM release (Cooked or Stock) or a Registry fix to help solve the problem?
ShogunMark - do you really think the thread was in the wrong place???? If its not ROM development then I'm in need of some guidance?
Click to expand...
Click to collapse
he moved the thread as it WAS in the wrong place, blackberry connect isnt related to Diamond ROM Development.
Yes you have to Hex edit the ROM to get it to work, but it doesnt belong in that forum, and to your other question the newer build of ROM is not a newer AKU or build.
walshieau said:
he moved the thread as it WAS in the wrong place, blackberry connect isnt related to Diamond ROM Development.
Yes you have to Hex edit the ROM to get it to work, but it doesnt belong in that forum, and to your other question the newer build of ROM is not a newer AKU or build.
Click to expand...
Click to collapse
I disagree - for most every other device - getting bbconnect to work has been the result of ROM Development - if your familiar with the other device forums - you'll see that Blackberry discussion is often linked with and found in the ROM development forum?
HOWEVER - I dont really care which thread it sits in as long as "we" can work on a solution if there is one available?
FINALLY - Thank you for the information on the Malaysian ROM
Blob8me said:
I disagree - for most every other device - getting bbconnect to work has been the result of ROM Development - if your familiar with the other device forums - you'll see that Blackberry discussion is often linked with and found in the ROM development forum?
HOWEVER - I dont really care which thread it sits in as long as "we" can work on a solution if there is one available?
FINALLY - Thank you for the information on the Malaysian ROM
Click to expand...
Click to collapse
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.
Blob8me said:
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
Click to expand...
Click to collapse
I'm not sure who to agree with...it really shouldn't matter so much to people.
Dark Fire said:
I'm not sure who to agree with...it really shouldn't matter so much to people.
Click to expand...
Click to collapse
Agreed - It shouldn't matter and here it will stay
I'm hoping for a tweak to the stock ROM (or even a "fixed" stock ROM to be released as I've heard that a next build Rom is due soon - and this has neen the main reason behind the delay in the UK and EU formal release??? Apparently - despite the popularity of "our" site less than 5% of device owners actually change anything on their phone never mind update firmware - official or otherwise? HTC are trying to minimise "support" issues by ironing out as many bugs before the next release - I know for a FACT that they use this site as a major test ground for any new device - so maybe the expansys release was intended after all???)
Thanks again.....
Blob8me said:
I'm hoping for a tweak to the stock ROM (or even a "fixed" stock ROM to be released as I've heard that a next build Rom is due soon - and this has neen the main reason behind the delay in the UK and EU formal release??? ... I know for a FACT that they use this site as a major test ground for any new device - so maybe the expansys release was intended after all???)
Click to expand...
Click to collapse
Yep, all of the evidence suggests that that's the reason behind the delayed release in Europe. New ROM. Hopefully with none of the bugs we've found so far (but I doubt it).
And that's a really interesting fact. It would be both nice and worrying to know that we influence them. (Nice when good devices like the Touch Diamond are announced, but worrying when there are major problems, such as that big driver problem).
Offtop (maybe)
I was playing yesterday with another phone and became the ROM extracted. So Registry and some of the files have the name of it in it. And I changed it to another name (Herm200 and HTC-HERMES) so that after the recreating and flashing the ROM it was everywhere Hermes. But PHONE ROM was dead (No signal, no phone). There were some imei*.pfg and some *.rgu and *.dsm where I changed all to HTC-HERMES and HERM200. So I had to flashing it to normal ROM.
And by the Diamond i worked with not extracted ROM. So i think there are 2 roads to change it: in extracted and not extracted ROM.
What do you think about it?
UPDATE on 1.34.831.1 and bbconnect?
Have just tried all the usual routes with the new EU Rom (details below) having used OliNex's SPL to Flash:
ROM: 1.34.831.1 WWE
Date: 5/25/08
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Radio: 0.93.25.NS16
Protocol version: 52.24.25.08H
Still no success..... I've seen that there are other Roms also out there such as 1.35.871.5 but not yet available?
I was hoping that the Stock EU Rom would be OK as in the past the Stock "Official" Roms have run bbconnect with no changes and no problems???
If anyone has any other suggestions then your help would be greatly appreciated?
UPDATE ON Elite 1.0 and bbconnect....
Still nothings working - Sigh.....
I've got a specific request in the main Elite 1.0 Rom thread for walshieau to add bbconnect support now that HSPL is released - so hoping it wont be too long now!
walshieau said:
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.
Click to expand...
Click to collapse
walshieau - any news on working on a solution now that we have HSPL out???? Can you add bbconnect compatability to the next Elite release????
UPDATE on 1.37.405 and bbconnect
Just added a comment on the main thread for this, the latest WWE EU Rom Release...... still not playing....
USAP - Any more thoughts??
walshieau - come on - you promised to help with a solution.....??? Help me out here????
Refresh......
Just refreshing as I'm getting desperate for a solution as I use the blackberry function for work and really don't want to switch back to my touch dual - has ANYONE had any success on the diamond with bbconnect?
Another "post" refresh.....
I'm still struggling to find a solution for this....???? In fact, I'm starting to wonder if there is a solution at all? Has anyone had any success at all with installing blackberry connect on any of the diamond Roms?
Blob8me said:
I'm still struggling to find a solution for this....???? In fact, I'm starting to wonder if there is a solution at all? Has anyone had any success at all with installing blackberry connect on any of the diamond Roms?
Click to expand...
Click to collapse
me waiting for a solution also. from what i notice, we just need 1 carrier to support bb on the diamond n we r all set. currently this is what i hav experience with the touch n touch dual which i have been able to connect despite local carrier not supporting it.
give a shout out if u do come across a solution though.
hi! everyone i just got my htc diamond from bell mobility .my rom version is 1.13 and rom date 10/02/08.as I was going through the forum i found out most of the guys have upgraded to or have higher version .so i tried downloading new version for the rom but htc site says "Sorry, this software download is not suitable for your device." .and there is one more thing even after installing microsoft .net 3.5 i'm not able to use light saber it shows some error. kindly help me out .
is your diamond tied to someone operator? If so have they no update to the just released, but apparently concluded after you have such a ROM old. You can always install some ROM from this page, read the guide how you will take to install HARDSPL, it's just to read you should see that it goes the way. also had problems with it with Netcf 3.5 but in the majority of ROM's are in from the start. good luck
I have a major problem right now.
i wanted to get co0kies home tab on my TP2
but i think that something screwed up..
i followed this tutorial for manila / sense 2.5
http://forum.ppcgeeks.com/showthread.php?t=108707
i did everything it told me to.
exact the way it told me.
after installing sense 2.5.2012.cab i've got this problem..
the language changed to english ( was on dutch )
and now i have this..
everything is wrote in capslock, and has IDS_ infront of it.
example: IDS_INTERNET, IDS_MUSIC_LIBARY, IDS_TWITTER, IDS_SETTINGS
etc etc
how do i fix this?
please help me fast!
greetings!
// edit
information about my software:
OS VERSION 5.2.2.1854
MANILA VERSION 2.5.20121225.0.CFC
ROM VERSION 1.88.404.3 (67102) NLD
ROM DATE 10/23/09
RADIO VERSION 4.49.25.17
PROTOCOL VERSION 61.44tc.25.32U
//edit2
i have the standart ROM, Did not flash it ! ( NO HARD-SPL OR W/E IT MEANS )
If i have to Flash it ( HARD-SPL ) Please help me with it, Even with the tutorial i can't do it on my own.
im so afraid right now!
//edit3
i've turned off HTC Sense, and turned on the normal WM GUI, Very simple but works without problems, so i think that i'ts the Sense that isn't working correct..
Maybe there's a way to sort things out on your phone right now, but I think it would be a lot simpler if you flashed a ROM that already had Sense 2.5 and Cookie baked into it. There are plenty of ROMs here that should do that for you, though of course you would need HardSPL first.
The sticky postings about HardSPL and how to flash ROMs are very detailed and explain things well. But if you have further questions on those then you can ask in those threads.
Someone else might come along and tell you how you can fix your Sense 2.5 right now, but that's beyone what I can do myself.
Thank you for your post, i will upgrade my phone to 2.5 with the ROM from HTC.com
Because i have a unlocked phone i can just download this, lol..
after that i might HardSPL.
thanks!
xheroxkefx said:
Thank you for your post, i will upgrade my phone to 2.5 with the ROM from HTC.com
Because i have a unlocked phone i can just download this, lol..
Click to expand...
Click to collapse
That doesn't have anything to do with whether your phone is unlocked though, you may well find it doesn't work (saying "invalid vendor id", or similar).
The official HTC ROMs will only work on HTC-branded phones for that specific area/region, unless you have HardSPL.
I live in Europe,
I will download the official HTC Rom for Europe Users,
After fixed, i will try to HARDSPL.
what does it means actually?
spl
im no pro but flashing hardspl will allow "unsigned" roms to be flashed. this means roms from htc and "cooked" roms will work on you're phone.
awsome, didn't know that.!
hello,
I am French and I must say that I easily lost here
I do not even know if I'm in the right section !
here is my problem: I want an android version that I can install on the HTC Kaiser and that is as stable as possible with as many features as possible
and if possible, completely change the OS of the phone (?)
I am currently running Windows Mobile 6.1 and I flashed the kaiser via HardSPL
ps: this message was translated by google translation