Related
i running pancake rom 1.5 and i noticed today i could not update my profile or my prl settings. it doesn't give me an error but it says "nothing available" for both. this is weird as usually it does something for me. i master reset the phone and reset my MSL as well after i got my code...still no change.
is this normal or what can i do to get this working? i think i have the latest prl btw!
anybody? and yes i searched before asking. i just need to know if this is abnormal behavior.
Try updating your radio. Fresh has it on his site, just dont do the new 2.1 one, you want the other one he has out. I think its like 1.56.
I did that and I have the proper PRL now. Just reflash it as an update.zip.
What PRI does your phone say you have?
dfbonney said:
What PRI does your phone say you have?
Click to expand...
Click to collapse
prl 60663
pri 1.70_003
mroneeyedboh said:
Try updating your radio. Fresh has it on his site, just dont do the new 2.1 one, you want the other one he has out. I think its like 1.56.
I did that and I have the proper PRL now. Just reflash it as an update.zip.
Click to expand...
Click to collapse
yeah but can't you brick your phone by doing so?
That may or may not even fix your issue. You should always see something along the lines of "applying your profile" or whatever when you do the update profile. There isn't always a PRL update so there are times you will get the error that nothing new is available.
Also, you should know that there is a fix for the RUU since you tried to call me out for assisting people (for a small charge) via logmein
smoother2010 said:
yeah but can't you brick your phone by doing so?
Click to expand...
Click to collapse
mroneeyedboh said:
Try updating your radio. Fresh has it on his site, just dont do the new 2.1 one, you want the other one he has out. I think its like 1.56.
I did that and I have the proper PRL now. Just reflash it as an update.zip.
Click to expand...
Click to collapse
that's the old RUU not a new radio.
dfbonney said:
That may or may not even fix your issue. You should always see something along the lines of "applying your profile" or whatever when you do the update profile. There isn't always a PRL update so there are times you will get the error that nothing new is available.
Also, you should know that there is a fix for the RUU since you tried to call me out for assisting people (for a small charge) via logmein
Click to expand...
Click to collapse
all it does it say it's checking, than says no update available for either. i find this weird. im not running stock, im running a custom 1.5 rom.
You have the same info as me for PRI/PRL. At a minimum... you're at least current.
smoother2010 said:
that's the old RUU not a new radio.
Click to expand...
Click to collapse
Go to my RUU 1.56 thread and download that nandroid backup, its stock with no root... see if it works?
smoother2010 said:
all it does it say it's checking, than says no update available for either. i find this weird. im not running stock, im running a custom 1.5 rom.
Click to expand...
Click to collapse
dfbonney said:
You have the same info as me for PRI/PRL. At a minimum... you're at least current.
Click to expand...
Click to collapse
okay that's good but if the prl & profile won't update that could be an issue in the near future? any ideas as to what might be wrong? i already reset the MSL today with no luck.
dfbonney said:
Go to my RUU 1.56 thread and download that nandroid backup, its stock with no root... see if it works?
Click to expand...
Click to collapse
so it could be the rom im running causing the issues. i know with winmo this used to be a problem with custom roms.
smoother2010 said:
okay that's good but if the prl & profile won't update that could be an issue in the near future? any ideas as to what might be wrong? i already reset the MSL today with no luck.
Click to expand...
Click to collapse
I agree that its an issue for the future, and if it was me I'd be trying to at least get my profile updating.
Very much could be, wont know until you try
smoother2010 said:
so it could be the rom im running causing the issues. i know with winmo this used to be a problem with custom roms.
Click to expand...
Click to collapse
dfbonney said:
I agree that its an issue for the future, and if it was me I'd be trying to at least get my profile updating.
Click to expand...
Click to collapse
yeah well im not calling sprint as i had a hard time even getting my msl number. they will just have me reset the phone again, i just got the damn thing the way i want it. id hate to have to unroot then start all over.
dfbonney said:
Very much could be, wont know until you try
Click to expand...
Click to collapse
if i flash the RUU will i be able to root the phone again?
Make a nandroid backup, download the one from the other post, restore that one and see if it works. Then you can go back to your other backup as soon as its done.
smoother2010 said:
yeah well im not calling sprint as i had a hard time even getting my msl number. they will just have me reset the phone again, i just got the damn thing the way i want it. id hate to have to unroot then start all over.
Click to expand...
Click to collapse
dfbonney said:
Make a nandroid backup, download the one from the other post, restore that one and see if it works. Then you can go back to your other backup as soon as its done.
Click to expand...
Click to collapse
got a link to that fixed RUU? after i run that will i have to root again?
smoother2010 said:
all it does it say it's checking, than says no update available for either. i find this weird. im not running stock, im running a custom 1.5 rom.
Click to expand...
Click to collapse
If it is saying CHECKING and says NO UPDATE AVAILABLE.......Then it is working. You have the proper PRI and PRL.
It's not going to update anything if there isn't one...
You can brick your phone by updating the Radio, but I think more people have bricked it trying to RUU...With a rooted phone, you take that chance with anything that you flash.
Anyway to do so in CM6 or do I always have to flash to another rom? Also, any possibility to get the device self help app on CM6? You can update prl/pri through there...
Device Self Service is just kind of a shortcut set -- it still has to use or access those actual Sprint/CDMA-based tools to update the PRL and profile.
And that hasn't been implemented in CM6 yet, or any AOSP or GSM-based ROM to my knowlege. I think because those Sprint apps/tools are closed source, it's really hard or even impossible to figure out how to make them work on anything but Sense and stock ROMs.
chromiumleaf said:
Device Self Service is just kind of a shortcut set -- it still has to use or access those actual Sprint/CDMA-based tools to update the PRL and profile.
And that hasn't been implemented in CM6 yet, or any AOSP or GSM-based ROM to my knowlege. I think because those Sprint apps/tools are closed source, it's really hard or even impossible to figure out how to make them work on anything but Sense and stock ROMs.
Click to expand...
Click to collapse
i have tried everything..... but for the life of me i cant update my prl....
Big-O-Devil said:
i have tried everything..... but for the life of me i cant update my prl....
Click to expand...
Click to collapse
What ROM? If you're on CM6, DD, or ZenEXP, you won't be able to cuz the update PRL tool isn't in those ROMs.
yeah i know that part but what i am saying is the i went back to fresh,zen, even the stock ruu and i cant update my prl...maybe its sprint that wont let me... ( "drops on his knees and screams really loud "WHY") lol lol... is there a way to manually do it... if so please show me the way to salvation..
Try 'Update profile' in that same menu place.....that will refresh/update your data and phone profile for Sprint towers. Could be that after so much ROM flashing the data profile on your phone just got a little off. Then try updating PRL after that and it might work.
If it doesn't work, see this post here for how to manually update a PRL: http://forum.xda-developers.com/showpost.php?p=6798016&postcount=15 (ignore the quoted part at the top of that post, just read the reply underneath it)
You'll have to search the forum here for an actual PRL text file -- they are out there.
chromiumleaf said:
Try 'Update profile' in that same menu place.....that will refresh/update your data and phone profile for Sprint towers. Could be that after so much ROM flashing the data profile on your phone just got a little off. Then try updating PRL after that and it might work.
If it doesn't work, see this post here for how to manually update a PRL: http://forum.xda-developers.com/showpost.php?p=6798016&postcount=15 (ignore the quoted part at the top of that post, just read the reply underneath it)
You'll have to search the forum here for an actual PRL text file -- they are out there.
Click to expand...
Click to collapse
ok so after so many days of trying i finally got it... i had to go back and manually do it.... yo again thank you for all your help.... o one more question what prl do you have... i went to 60669...
Big-O-Devil said:
ok so after so many days of trying i finally got it... i had to go back and manually do it.... yo again thank you for all your help.... o one more question what prl do you have... i went to 60669...
Click to expand...
Click to collapse
Should be 60670
what should the newest pri be listed as?
I just flashed fresh 2.3 so I could update both and I have the prl version you mentioned.
DirtyShroomz said:
Should be 60670
Click to expand...
Click to collapse
Hey and with 60670 you don't have any problems
.
Sent from my HERO200 using XDA App
Voicemail not working after flashing to new ROM, tried 3 roms none of them r giving me voicemail. LIQUIDSENSE 2.1, ALOYSIOUS 2.1, NFX hero 2.2, whats the problem. I get a message in tool bar that cant be cleared "A mandatory update is available", but when i try to upgrade i get "General failure. Please try again at a later time"
What to do any suggestions. Ive been hearing bout using google voice, but im kinda lost on that.
PLZ SOMEBODY HELP
cperkins0 said:
Voicemail not working after flashing to new ROM, tried 3 roms none of them r giving me voicemail. LIQUIDSENSE 2.1, ALOYSIOUS 2.1, NFX hero 2.2, whats the problem. I get a message in tool bar that cant be cleared "A mandatory update is available", but when i try to upgrade i get "General failure. Please try again at a later time"
What to do any suggestions. Ive been hearing bout using google voice, but im kinda lost on that.
PLZ SOMEBODY HELP
Click to expand...
Click to collapse
go back to stock 2.1 update the app from there, then backup the .apk (astro file explorer has a tool that allows you to do this) then install it in the other builds
which file is it in? I can't find it
its called com.core.apk or something like that im not sure where it hangs out
cmyasika1 said:
which file is it in? I can't find it
Click to expand...
Click to collapse
thoughtlesskyle said:
its called com.core.apk or something like that im not sure where it hangs out
Click to expand...
Click to collapse
Yeah, it's something like that in system/app
sprint_core.apk in /system/app there may be an odex. i always rm NameOfApp.*
if you delete the apk it may cause problems(maybe. didnt for me but has for others). you also wont be notified of vm's. youll have to call to check. on a 2.1 rom, that is. thats how it worked for me anyway.
personally, my vm isnt working on my new device. like it never set itself up correctly. if anyone should happen to have a link to some instructions to set this up, that would be fantastic. I hate calling the silly people at sprint. thank you
bump this. need help.
vrundmc said:
bump this. need help.
Click to expand...
Click to collapse
Did you try flashing the version in my sig?
theimpaler747 said:
Did you try flashing the version in my sig?
Click to expand...
Click to collapse
i havent tried that as im having annoying problems with my vvm on my device.
http://forum.xda-developers.com/showthread.php?t=855545
guess ill try to use this one here.
tailsthecat3 said:
i havent tried that as im having annoying problems with my vvm on my device.
http://forum.xda-developers.com/showthread.php?t=855545
guess ill try to use this one here.
Click to expand...
Click to collapse
Try flashing my version, let me know how it goes!
theimpaler747 said:
Did you try flashing the version in my sig?
Click to expand...
Click to collapse
Flashed your file...same issue...delay in setting up voicemail... Flashed and restarted. Even tried rebooting. No go. My activation message is stuck in the undelivered box.
theimpaler747 said:
Try flashing my version, let me know how it goes!
Click to expand...
Click to collapse
it didnt work. i removed the original, flashed yours. still have the undelivered message, the activation message. nothing is working, i cant figure it out. and when i called sprint, they reset my vm, so i lost messages and had to set up everything again...
FYI to Impaler, your VVM version in your sig works for those in areas where an official update has not rolled through yet.
Don't know if you are aware, but Sprint recently updated the VVM software to version T.5.1.0.48 (here in TX it was updated the last week of October). Note that Sprint CSR will not be able to help you reset it unless you are on a Sense ROM. Period.
Two options to fix on your non-Sense ROM... there is an updated .apk floating around on these boards (might need to PM someone for it). Get it and install via your file manager.
Or...
Other way is to nandroid your current ROM, then flash a Sense ROM like Fresh's most current. Then, update your PRL and Profile, then go into the VVM and press Menu and update Sprint VVM.
Then, either try to nandroid back to your original ROM and check to see if that does it (haven't tried that, but it might work)... or else... yes, you will need to pull the updated com.coremobility.app.vnotes from the Sense ROM and install the pulled .apk into your new ROM.
Hope this helps.
mr. implaler, I have used yours for the last weeks successfully, so thank you. I just ran into the same problem with the mandatory upgrade, and it is an update i did before I rooted my phone. the VM did work this morning on MUIU but i loaded MYN and that is when my issue started.
Hope someone can firgure it out
thanks again implaler
mine just actually updated and works and phone didn't unroot
vrundmc said:
Flashed your file...same issue...delay in setting up voicemail... Flashed and restarted. Even tried rebooting. No go. My activation message is stuck in the undelivered box.
Click to expand...
Click to collapse
Here is my solution.
http://forum.xda-developers.com/showthread.php?t=855545
I had 9016 in the blocked texts list. Hope this helps you.
Excellent...let me add to this...
I suppose using variations of ROMS that don't include VVM and block 9016 caused this issue.
You can unblock 9016 by going to your account online, under "My Devices," then "My Preferences." Scroll down to the "Limits and permissions" section. You will see the "Block Texts" link there.
vrundmc said:
Flashed your file...same issue...delay in setting up voicemail... Flashed and restarted. Even tried rebooting. No go. My activation message is stuck in the undelivered box.
Click to expand...
Click to collapse
tailsthecat3 said:
it didnt work. i removed the original, flashed yours. still have the undelivered message, the activation message. nothing is working, i cant figure it out. and when i called sprint, they reset my vm, so i lost messages and had to set up everything again...
Click to expand...
Click to collapse
Hmm... I still can't tell if this is a Sprint or a root issue....
alaman68 said:
mr. implaler, I have used yours for the last weeks successfully, so thank you. I just ran into the same problem with the mandatory upgrade, and it is an update i did before I rooted my phone. the VM did work this morning on MUIU but i loaded MYN and that is when my issue started.
Hope someone can firgure it out
thanks again implaler
Click to expand...
Click to collapse
No problem, glad it worked well for you
jedijackie said:
FYI to Impaler, your VVM version in your sig works for those in areas where an official update has not rolled through yet.
Don't know if you are aware, but Sprint recently updated the VVM software to version T.5.1.0.48 (here in TX it was updated the last week of October). Note that Sprint CSR will not be able to help you reset it unless you are on a Sense ROM. Period.
Two options to fix on your non-Sense ROM... there is an updated .apk floating around on these boards (might need to PM someone for it). Get it and install via your file manager.
Or...
Other way is to nandroid your current ROM, then flash a Sense ROM like Fresh's most current. Then, update your PRL and Profile, then go into the VVM and press Menu and update Sprint VVM.
Then, either try to nandroid back to your original ROM and check to see if that does it (haven't tried that, but it might work)... or else... yes, you will need to pull the updated com.coremobility.app.vnotes from the Sense ROM and install the pulled .apk into your new ROM.
Hope this helps.
Click to expand...
Click to collapse
Ok cool, well glad it worked for a few people
I posted this over at Cyanogenmod Forums and thought I'd post here as well.
I'm running CM7-RC4 and as of yesterday my phone stopped recieving txts. I can send just fine, just can not recieve.
Was using Handcent as my default txt'ing app, then tried uninstalling/reinstalling to see if that would fix it....no dice!
Hoping with all the expertise around here someone might have a solution. Still wont recieve even with stock txt app.
Please help as I can not go without txt'ing. Thanks in advance!
Nand, flash a Sense rom, update prl and profile, send a few texts, receive a few, and nand back to cm. That should take care of your issues. BTW, what it's your prl? Current is 60677.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
Thx for the quick reply. PRL is 60676.
Could you point me to a link of a good Sense rom I can flash? Thx again!
FanOfSkynyrd said:
Thx for the quick reply. PRL is 60676.
Could you point me to a link of a good Sense rom I can flash? Thx again!
Click to expand...
Click to collapse
I'm on my phone, just check the dev thread. Liquidsense or nfx are good choices, I'm told. I still have my original Sense nand from when I rooted, and that's what I use. I would also recommend that you make a nand of the Sense rom before you go back, just so you have one handy for updating.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
Sweet, thanks! I forgot I still may have the backup from when I rooted my phone too, I'll see.
Will give this all a go and post back how it works out!
FanOfSkynyrd said:
Sweet, thanks! I forgot I still may have the backup from when I rooted my phone too, I'll see.
Will give this all a go and post back how it works out!
Click to expand...
Click to collapse
Yeah, let me know how it goes.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
Dude...worked like a charm!! Still had my original Sprint ROM Nandroid backup tucked away on my laptop. Shuffled it over onto my SDcard and flashed it. Updated PRL and in came a flood of missed texts!!
Will keep that sprint sense rom on my sd card from now on!! Thanks again!!
No problem. Glad to help.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
I'm also on CM7 and my PRL is rather outdated, 60671, but nothing appears to be out of order. Should I update my PRL just because, or if it ain't broke don't fix it?
Thanks,
sleepy
sleepyEDB said:
I'm also on CM7 and my PRL is rather outdated, 60671, but nothing appears to be out of order. Should I update my PRL just because, or if it ain't broke don't fix it?
Thanks,
sleepy
Click to expand...
Click to collapse
Yeah, I would. You may not be having issues now, but you will eventually.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
Yeah, that's kind of what I figured, but just wanted to get a second opinion...thanks!
sleepy
sleepyEDB said:
Yeah, that's kind of what I figured, but just wanted to get a second opinion...thanks!
sleepy
Click to expand...
Click to collapse
No problem.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
I've been having the exact same problem but this doesn't seem to be working for me. I've made a nandroid backup of my CM7 install, wiped everything, and flashed the latest LiquidSense rom. However, when I go to update the PRL it tells me that : "The application OMADM (process com.htc.android.amadm) has stopped unexpectedly. Please try again." Is there anything I missed or should I try another sense rom/reflashing?
EDIT: I reflashed the LiquidSense rom and now I got all my messages from before. Restored my CM7 nandroid and getting messages again. No idea what happened but as long as it works...
zach.d.schultz said:
I've been having the exact same problem but this doesn't seem to be working for me. I've made a nandroid backup of my CM7 install, wiped everything, and flashed the latest LiquidSense rom. However, when I go to update the PRL it tells me that : "The application OMADM (process com.htc.android.amadm) has stopped unexpectedly. Please try again." Is there anything I missed or should I try another sense rom/reflashing?
EDIT: I reflashed the LiquidSense rom and now I got all my messages from before. Restored my CM7 nandroid and getting messages again. No idea what happened but as long as it works...
Click to expand...
Click to collapse
More than likely, you just got a bad flash. Happens sometimes. Glad you got it fixed.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
Had my Hero for a little over a year now. Been rooted for most of that time. Currently running Aosp from 02-10-11. I also have 2.6.29.6 Aosp Kernel. Not sure if any other info needed. I have normal coverage where I live and mostly everywhere else except where I work. I drop calls all the time, lose data, etc. I called Sprint and was told its my Hero, not the network. They said they have a new tool that tells them what is causing the problem, so its def my phone. I also have terrible battery life, and my phone is laggy as hell. I just want to know what my best option would be. Should I go to the Sprint store and have them replace my phone? Should I start from scratch (rooting wise) and take it from there? Or should I just wait for the Evo 3D to come out and suck it up? Just not sure which road to take. Any help is GREATLY appreciated. And sorry if this has been asked previously, I did some searches and couldnt find much info.
To see if it's on your end, do a fresh install of your favorite ROM on its latest release. Preferable latest aosp or cyanogen stable. If it's still laggy, hardware. If not, then your hero is good. For the network, after you install a ROM, run a speed test. Then update to the latest prl. Run again. If it gets better, than great. If not, then proceed to update a Verizon prl. If good, than it's not your hardware. If it is, think about getting a replacement.
Great advice. Dont think I ever updated my PRL. How do I go about doing so and where do I get them? Fresh install is what I was leaning towards.
DozeBeatS said:
Great advice. Dont think I ever updated my PRL. How do I go about doing so and where do I get them? Fresh install is what I was leaning towards.
Click to expand...
Click to collapse
please go here and read the thread, if it's been a while you'll want to do the update manually, the most recent PRL is 01115.
http://forum.xda-developers.com/showthread.php?t=1046899
Lol Big duce is on the ball baby! Hooah!
Ok Im sold. Gonna update the PRL following the instructions in that thread. After that its a fresh install of either cm7 or aosp. Last question...Does a fresh install consist of wiping the data/factory reset and thats it? Or am I missing something? Again, TY so much. Quick response as well.
You on clockwork? You should if you aren't.
And a fresh install to me is wiping the dalvike, boot, cache, system, and data. Then installing the ROM.
I see everything except for boot, and system. And Im on Clockwork 2.5.0.7
I'm on 3.0.2.4, but in that version it's in the mount section.
Gotcha! Heres goes nothing.
DozeBeatS said:
I see everything except for boot, and system. And Im on Clockwork 2.5.0.7
Click to expand...
Click to collapse
my personal recommendation is aospCMod 4/21, for correct install instructions go to the wiki www.romrepo.info/wiki
il Duce said:
my personal recommendation is aospCMod 4/21, for correct install instructions go to the wiki www.romrepo.info/wiki
Click to expand...
Click to collapse
Will definitely take your advice.
Is it smart to use the google backup and restore feature?
DozeBeatS said:
Is it smart to use the google backup and restore feature?
Click to expand...
Click to collapse
Are you talking about the market app restore?
I guess thats what it was. So far everything is looking good. Will have to wait till I go to work tomorrow to see if the signal is any better. Thanks again!