Hi all,
My X1 when plug USB cable to PC (Select USB drive, not sync), PC show storage card normally, but open folder, after few second, this is auto disconnect USB to PC.
My device: X1i, WM6.1
Please help me troubleshoot. Thanks a lot.
Obelix2006 said:
Hi all,
My X1 when plug USB cable to PC (Select USB drive, not sync), PC show storage card normally, but open folder, after few second, this is auto disconnect USB to PC.
My device: X1i, WM6.1
Please help me troubleshoot. Thanks a lot.
Click to expand...
Click to collapse
Hardware issue with either USB-cable, or the USB-ports on the phone or pc.
Did you try another cable and/or USB-port on your pc?
Lokatho said:
Hardware issue with either USB-cable, or the USB-ports on the phone or pc.
Did you try another cable and/or USB-port on your pc?
Click to expand...
Click to collapse
Thank for your answer, but my device charge very good, I tried another 2 PC (1 laptop, 1 desktop) and many USB cable, but same same. If I use connnect by sync, it is very good. I don't understand.
If it does the same on 3 pc's and with different USB cables I would say there is something wrong with the USB port on your phone, even though you have no problems charging.
Lokatho said:
If it does the same on 3 pc's and with different USB cables I would say there is something wrong with the USB port on your phone, even though you have no problems charging.
Click to expand...
Click to collapse
Uhm, I'm not sure, because I still copy file to storage card, after copy file, USB auto disconnect. Before about haft month, my device normally, no problem, few near day it have this problem.May it virus in storage card, and antivirus in PC detect it and disconnect USB??
try reformatting the card..
or try hard resetting the phone..
or try another microSD card..
azian_advanced said:
try reformatting the card..
or try hard resetting the phone..
or try another microSD card..
Click to expand...
Click to collapse
OK, thank you, I'll try.
Obelix2006 said:
OK, thank you, I'll try.
Click to expand...
Click to collapse
Hi all,
I have fixed this problem: Start - settings - System - power - Advanced : do not tick on: Turn off backlight... and turn off device...
Hix, i'm very happy, thanks for your answered.
Related
Hi, my Touch HD is still under warranty but I'm running Hard SPL 1.56.Olinex.
My USB is not working, it just charges my phone. My SD Card reader is also not working... So I can only connect via BT and I can't find any way of restoring SPL without USB/SD... Is it impossible?
mcafee545 said:
Hi, my Touch HD is still under warranty but I'm running Hard SPL 1.56.Olinex.
My USB is not working, it just charges my phone. My SD Card reader is also not working... So I can only connect via BT and I can't find any way of restoring SPL without USB/SD... Is it impossible?
Click to expand...
Click to collapse
Do u try a HARD RESET? If you try a Hard Reset and still have the same Problem you can do some of the things.. tell me witch ROM u use.. maybe the USB problem that don`t wana sync is from the ROM.. also sometimes when you flash a 6.5 ROM the CARD is not visable one FOrmat normaly will clear the things but its bad when you cannot conetc to format via PC
The Best you can do is to flash Another ROM via SD Card but 1st you need to make your SD card working so if you have some SD adapter or some other device that you can take out your SD card from the Phone and conect it directly to the PC will be perfect to FORMAT it.. Once the problem with your CArd is fixed you can just put there some new ROM and Flash the Device...
Its very Bad when on the same time the USB and Card not working but don`t worry you can fix the things but its not so easy.
I'm running official HTC Touch HD_MR_2009_RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship.exe... I can connect to PC via BT and copy files...
mcafee545 said:
I'm running official HTC Touch HD_MR_2009_RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship.exe... I can connect to PC via BT and copy files...
Click to expand...
Click to collapse
Yes but the NEW Cooocked ROm is around 170MB so you will need few days to copy this via BT also when your SD card not working this is not posible because the ROM file must to be located in the root of the SD card
Now i understand that you use STOCK ROM so the best you can do is to go in HTC service for Warranty i was thinking you have a problem with Coocked ROM but when is with STOCK ROM its not your fault.
The problem is that I've installed Hard Spl... If I take it to HTC they probably are gonna say it's not covered by warranty...
If you use usb to charge your phone than datacommunication with your pc has to work.
Which OS are you running, because when you entering the bootloader your pc doesn't see your phone as a mobile device anymore.
If you're running WMDC and entering the bootloader than Vista or W7 is searching for new drivers..... If not found read this topic http://forum.xda-developers.com/showthread.php?t=524619
For XP you have to install the drivers yourself.
They can also be found in the link.
When the drivers are installed en your phone is synced than it will show USB in bootloader.
After that flash back to stock SPL
Hopefully this is will help you, your problem is very strange
Because of a not workin SD card and a not working USB
I wish you luck!
Thx! I'll give it a try tonight... but I don't think that will help because I've hard-reset the device and tried with Windows 7 and Windows XP and nor the phone nor the pc show any message.
I remember that the SD card did show up, but after a few seconds it would disappear... But now it never shows up... Already changed usb options on control panel...
The last thing I did when the SD was ok was trying Android with no luck.
I believe it's really an hardware problem and maybe I could replace the board that has SD/USB/SIM but would like to use my warranty....
If you update usb drivers there's a good chance that your device will show up on pc. Don't forget to 'enable usb connections' in activesync connections settings
Also if this doesn't work try flashing orginal stock rom which came with your device. This rom, and only this rom, will still flash as long as you are connected to pc (doesn't need to say 'usb' at bottom of bootloader). Alternatively try MTTY
Rick
I had a very similar problem when I last tried andriod. first of all my sd card dropped off, It would go in, be seen and then drop again as soon as I tried to access it. Android had corrupted it. Try reformatting your SD card fat32, copy the rom on and try updating the ROM again using your SD card.
It also busted my pc drivers on my pc, I had to uninstall them completely and then load the latest drivers. If you have another pc try it on this first before faffing with your USB drivers.
Once my sd card was back I couldnt flash any roms, no usb connection. I did a hard reset and then went into spl manually and set it running that didnt seem to work but when my phone rebooted usb was backup.
It seems andriod manager to corrupt my ROM, SD card and uSB drivers on my PC, I havent bothered with Android since and wont until there is a bootable ROM available (never)?
Your USB cable may be bad. Sometimes they stop working and pc communications stops. I've had to replace my usb cables from time to time.
mcafee545 said:
Thx! I'll give it a try tonight... but I don't think that will help because I've hard-reset the device and tried with Windows 7 and Windows XP and nor the phone nor the pc show any message.
I remember that the SD card did show up, but after a few seconds it would disappear... But now it never shows up... Already changed usb options on control panel...
The last thing I did when the SD was ok was trying Android with no luck.
I believe it's really an hardware problem and maybe I could replace the board that has SD/USB/SIM but would like to use my warranty....
Click to expand...
Click to collapse
Last time I had something like this, I had to remove the HD from windows mediaplayer. For some reason it was there as plain "storage card" if I remember correctly. After that I could connect normally with the HD again.
*Have you verified that your SD Card is actually working at all?
*-I've had a problem in the past with an "old" SD Card that wouldn't recognise properly in either my PC or my phone. Turns out all i had to do was clean the contacts on it lightly. My original 8Gb SD Card that came with my Blackstone has also completely died. It will not format, will recognise then drop-off and attempting to use it in ANY manner resulted in it becoming excessively hot - Dead card, not replaceable under warranty
*If the SD Card works in your PC, have you tried formatting it to "Device Defaults" via the PC?
*-This problem has in the past also prohibited me from using my SD Card in my Blackstone. For some devices, without certain registry tweaks enabled, only particular formats of SD Cards are recognised. I have also noticed that the card must be formatted in a particular way to be useable as a ROM Flashing card. The Blackstone simply won't read any images from the card in bootloader mode if the card is formatted improperly.
* Try another USB Cable, being able to charge via USB does NOT mean it WILL sync, for example, if your USB cable has bent/damaged contacts, or if the cable itself has a broken lead, the VCC (voltage core) and GND (ground) leads can still create a circuit to send power to the device which will enable it to charge.
*-Also try other USB ports... you never know when one maybe too dusty / dirty / faulty
* Windows 7 / Vista? Uninstall Window Mobile Device Centre (WMDC) re-download and reinstall, or allow Windows Update to do this for you after you've uninstalled. A simple registry error can fark this right up. I should know, as I recently accidentally imported my Blackstone's registry backup to my laptop... ugh that was a nightmare. Windows 7 recovered, but I spent a few days browsing with the wrong user-agent, meaning a lot of websites were redirecting to their "mobile" or "wap" counterparts...ewwww
* Windows XP? Well I can't say too much there, as I haven't used it pretty much since Vista was released years ago. Just do your best to make sure all drivers are updated appropriately.
other sd card
have you tired a different sd card there are known issues with some types of cards sd vs' sdhc and class 2 vs' class 6 cards. Also you may have a bad usb cable? Do you have .net framework installed. are you trying all this on the same computer you used to flash your phone with hspl. You can try putting your phone into bootloader mode wait for usb to appear on the bottom of the tri-color screen and then reflash stock spl from there by opening the BlackstoneRUUWrapper and going through the steps it should see your phone. See the wiki!
And why did you hspl if you have a stock rom?
I did a sim-unlock and didn't restore the spl after the process... I was waiting for the perfect 6.5 ROM...
I didn't have time to test it yesterday but I brought it with me and will try again later...
I already tested the SD in other Windows Mobile phones and was ok... The SD is not the original (Transcend) but a SanDisk 8GB but already tried it with a 2GB SD and nothing. Also tried with different cables. And in different PCs (windows xp and Windows 7). Also did a hard-reset.
Nothing worked! When I enter bootloader with usb cable connected there is no SERIAL and no USB message, but if I remove the cable it changes to SERIAL and doesn't change anymore. On the PC, with XP, W7 and Ubuntu, nothing happens... lsusb gives nothing... on device manager it doesn't show up.
Regarding the SD card, when I insert it the screen turns on, but still no storage card detected... I really think it's an hardware problem.... I ordered this, just in case, http://cnn.cn/shop/touch-simmicrousb-card-module-p-7149.html, but will still try to take it to warranty before because there is a seal over one of the screws...
Thank you all!
Whenever I plug the Capativate (AT&T) into my pc it detects, but doesnt show up yes dev options are disabled and it shows the screen where usb storage. Any ideas i've tried multiple things including swap batteries, rom change, and even installing nexus drivers. BTW i'm using RemICS link is http://forum.xda-developers.com/showthread.php?t=1625619 Thanks
Jitar said:
Whenever I plug the Capativate (AT&T) into my pc it detects, but doesnt show up yes dev options are disabled and it shows the screen where usb storage. Any ideas i've tried multiple things including swap batteries, rom change, and even installing nexus drivers. BTW i'm using RemICS link is http://forum.xda-developers.com/showthread.php?t=1625619 Thanks
Click to expand...
Click to collapse
Do you have fast charge unable?
Also, when you see the usb storage screen, do you mount it?
Did you try to mount storage through recovery?
BWolf56 said:
Do you have fast charge unable?
Also, when you see the usb storage screen, do you mount it?
Did you try to mount storage through recovery?
Click to expand...
Click to collapse
. Actually I found out the problem it was a usage of an ADB driver every time it was plugged in, thanks for trying to help though
Hi All,
I'm newbie to this area and I just flashing my P1000 into CM10.1 with JB 4.2.2. Everything is work fine for me and I love the PDroid Manager function very much too!
The only problem that I encountered now is the USB mass storage function. When i plug in the USB cable into desktop computer, it only shows external SD card drive but internal SD card drive shows nothing whereby lots of data were stored into internal SD card.
Does anyone help to enlightening me on how to get back to live for my internal SD card drive?
Thanks in advance!
Regards,
littlejohn799
littlejohn799 said:
Hi All,
I'm newbie to this area and I just flashing my P1000 into CM10.1 with JB 4.2.2. Everything is work fine for me and I love the PDroid Manager function very much too!
The only problem that I encountered now is the USB mass storage function. When i plug in the USB cable into desktop computer, it only shows external SD card drive but internal SD card drive shows nothing whereby lots of data were stored into internal SD card.
Does anyone help to enlightening me on how to get back to live for my internal SD card drive?
Thanks in advance!
Regards,
littlejohn799
Click to expand...
Click to collapse
Try to disable and re-enable the mass storage.
The error should only occur after the boot.
Bye. Paolo.
alessandronip said:
Try to disable and re-enable the mass storage.
The error should only occur after the boot.
Bye. Paolo.
Click to expand...
Click to collapse
Hi Paolo,
Thanks for your advice. However, I tried to disable & re-enable the mass storage under storage - USB computer connection still can't solve my problem as computer keep asking to "insert a disk" when I click the internal SD card drive.
Any idea?
Thanks.
hi all,
after reset all setting to default factory setting, the internal SD card mass storage issue had been settled. Thanks for your concern and advice.
regards,
littleJohn
hi there,
i installed the rom is its fine, but i cant connect it to my pc ..
I researched the problem already and a solution should be to dial *#7284# into the dialpad and enter some kind of menu... but it doesn´t happen for me :<
anyone an idea ?
appreciate it
Corey- said:
hi there,
i installed the rom is its fine, but i cant connect it to my pc ..
I researched the problem already and a solution should be to dial *#7284# into the dialpad and enter some kind of menu... but it doesn´t happen for me :<
anyone an idea ?
appreciate it
Click to expand...
Click to collapse
Connect to your PC?
You are not being clear.
You connect it using the USB cable.
If you meant to say the PC can't detect it, you still have to tell in what way, as storage, in Odin, etc, etc?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Connect to your PC?
You are not being clear.
You connect it using the USB cable.
If you meant to say the PC can't detect it, you still have to tell in what way, as storage, in Odin, etc, etc?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
yeah, im connecting it to my pc and it doesnt appear in windows as mass storage
hardware manager shows "7 CDC´s" as a missing driver ..
and i figured i have to enter some kind of menu, dialing *#7284# into dialpad to reset the usb settings of the tablet
but the menu doesnt appear if i dial the number ..
Corey- said:
yeah, im connecting it to my pc and it doesnt appear in windows as mass storage
hardware manager shows "7 CDC´s" as a missing driver ..
and i figured i have to enter some kind of menu, dialing *#7284# into dialpad to reset the usb settings of the tablet
but the menu doesnt appear if i dial the number ..
Click to expand...
Click to collapse
Have you set Fast Charger?
If set can not use mass storage.
Bye. Paolo.
alessandronip said:
Have you set Fast Charger?
If set can not use mass storage.
Bye. Paolo.
Click to expand...
Click to collapse
fast charge is off
Hi All,
Same problem comes back again after I've done factory reset to my GT-P1000. Besides this, I discover that the radio keeps telling me no service but I still can access my mail using mobile data network (not WiFi).
Other than these, my GT-P1000 will reboot itself automatically. Please be informed that I did flashing this from original GB to this ROM directly.
Is there any advice can be taken? I don't wish keep factory resetting my GT-P1000 in order to access the internal SD again.
Another issue need to find out is how to switch the picture storage location from internal SD to external SD after camera snapped?
Please help, thanks!
Regards,
littleJohn
i cant connect to my hard disk with touchpad. İ have otg cable but it doesnt see my hard disk . please help . i want to see hard disk with my hp touchpad
You will need to connect to a PC to transfer files. I've never heard of connecting a drive directly. I don't think the USB port is powered!
PerfectBrainxxx said:
i cant connect to my hard disk with touchpad. İ have otg cable but it doesnt see my hard disk . please help . i want to see hard disk with my hp touchpad
Click to expand...
Click to collapse
kulkat said:
You will need to connect to a PC to transfer files. I've never heard of connecting a drive directly. I don't think the USB port is powered!
Click to expand...
Click to collapse
A. Don't use an otg cable, use a standard micro usb
B. In order to have the PC recognize the TP, you have to Novacom usb drivers installed
C. You can connect many usb devices, including hard disks, but you may need a powered usb hub since the TP doesn't provide enough power to drive many of them
shumash said:
A. Don't use an otg cable, use a standard micro usb
B. In order to have the PC recognize the TP, you have to Novacom usb drivers installed
C. You can connect many usb devices, including hard disks, but you may need a powered usb hub since the TP doesn't provide enough power to drive many of them
Click to expand...
Click to collapse
Yup. It makes perfect sense.
When I connect (USB cable) my new Huawey P9 to a Laptop (Win7) Windows recognize it as a new drive, but can not open the files on Cards. With my old Samsung Galaxy this was possible, and easy and comfortable. For example easy to copy MP3 files from laptop to card, and listening them on phone.
Is that possible with Huawey P9?
Did you tap "files" from pull-down menu, or it's still "charge only"?
Yes, I did it. And unlocking of the phone's screen also.
bratusm said:
Did you tap "files" from pull-down menu, or it's still "charge only"?
Click to expand...
Click to collapse
Yes, I did it. And unlocking of the phone's screen also. No result! No four beer! But thanks any way for intention.
Sdoki said:
Yes, I did it. And unlocking of the phone's screen also. No result! No four beer! But thanks any way for intention.
Click to expand...
Click to collapse
I believe that you have drivers on PC and/or HiSuite?
bratusm said:
I believe that you have drivers on PC and/or HiSuite?
Click to expand...
Click to collapse
Yes, I have drivers and HiSuite also. But still I can access the SD card of the Phone from my Laptop, but accessible from Phone of curse. Is that possible that the problem is that the SD card is a Samsung type? With Samsung Galaxy N700 the access was rather simple with USB connection (fast), and the card was readable a writable too by Windows.
To be clear: how to access (simplest, fastest way) the SDcard of a mobile from a WIN-Laptop?
Sdoki said:
Yes, I have drivers and HiSuite also. But still I can access the SD card of the Phone from my Laptop, but accessible from Phone of curse. Is that possible that the problem is that the SD card is a Samsung type? With Samsung Galaxy N700 the access was rather simple with USB connection (fast), and the card was readable a writable too by Windows.
To be clear: how to access (simplest, fastest way) the SDcard of a mobile from a WIN-Laptop?
Click to expand...
Click to collapse
I understand you...
I have no problems at all... Lucky me
I know just one more thing you can try - transfer all data from SDcard to PC - use card reader, or transfer to internal memory, if you have space, then format SDcard from recovery or withing phone settings. Might help... :fingers-crossed:
bratusm said:
I understand you...
I have no problems at all... Lucky me
I know just one more thing you can try - transfer all data from SDcard to PC - use card reader, or transfer to internal memory, if you have space, then format SDcard from recovery or withing phone settings. Might help... :fingers-crossed:
Click to expand...
Click to collapse
I did it in the end! The way: Taping seven times at the Build number enables the developer mode. Than:
1 Enabling error-checking on USB
2 Enabling application checking on USB
3 USB configuration: MTP
Now it works as I prefer.
I had the intention of formatting as you suggested, but is seems that this is the way needed.
Thanks for advices!
Sdoki said:
I did it in the end! The way: Taping seven times at the Build number enables the developer mode. Than:
1 Enabling error-checking on USB
2 Enabling application checking on USB
3 USB configuration: MTP
Now it works as I prefer.
I had the intention of formatting as you suggested, but is seems that this is the way needed.
Thanks for advices!
Click to expand...
Click to collapse
Excellent! Great job and great tutorial for all how to do it :highfive: