cm 11 jcsullins otg problem - TouchPad Q&A, Help & Troubleshooting

i cant connect to my hard disk with touchpad. İ have otg cable but it doesnt see my hard disk . please help . i want to see hard disk with my hp touchpad

You will need to connect to a PC to transfer files. I've never heard of connecting a drive directly. I don't think the USB port is powered!

PerfectBrainxxx said:
i cant connect to my hard disk with touchpad. İ have otg cable but it doesnt see my hard disk . please help . i want to see hard disk with my hp touchpad
Click to expand...
Click to collapse
kulkat said:
You will need to connect to a PC to transfer files. I've never heard of connecting a drive directly. I don't think the USB port is powered!
Click to expand...
Click to collapse
A. Don't use an otg cable, use a standard micro usb
B. In order to have the PC recognize the TP, you have to Novacom usb drivers installed
C. You can connect many usb devices, including hard disks, but you may need a powered usb hub since the TP doesn't provide enough power to drive many of them

shumash said:
A. Don't use an otg cable, use a standard micro usb
B. In order to have the PC recognize the TP, you have to Novacom usb drivers installed
C. You can connect many usb devices, including hard disks, but you may need a powered usb hub since the TP doesn't provide enough power to drive many of them
Click to expand...
Click to collapse
Yup. It makes perfect sense.

Related

Auto disconnect USB to PC

Hi all,
My X1 when plug USB cable to PC (Select USB drive, not sync), PC show storage card normally, but open folder, after few second, this is auto disconnect USB to PC.
My device: X1i, WM6.1
Please help me troubleshoot. Thanks a lot.
Obelix2006 said:
Hi all,
My X1 when plug USB cable to PC (Select USB drive, not sync), PC show storage card normally, but open folder, after few second, this is auto disconnect USB to PC.
My device: X1i, WM6.1
Please help me troubleshoot. Thanks a lot.
Click to expand...
Click to collapse
Hardware issue with either USB-cable, or the USB-ports on the phone or pc.
Did you try another cable and/or USB-port on your pc?
Lokatho said:
Hardware issue with either USB-cable, or the USB-ports on the phone or pc.
Did you try another cable and/or USB-port on your pc?
Click to expand...
Click to collapse
Thank for your answer, but my device charge very good, I tried another 2 PC (1 laptop, 1 desktop) and many USB cable, but same same. If I use connnect by sync, it is very good. I don't understand.
If it does the same on 3 pc's and with different USB cables I would say there is something wrong with the USB port on your phone, even though you have no problems charging.
Lokatho said:
If it does the same on 3 pc's and with different USB cables I would say there is something wrong with the USB port on your phone, even though you have no problems charging.
Click to expand...
Click to collapse
Uhm, I'm not sure, because I still copy file to storage card, after copy file, USB auto disconnect. Before about haft month, my device normally, no problem, few near day it have this problem.May it virus in storage card, and antivirus in PC detect it and disconnect USB??
try reformatting the card..
or try hard resetting the phone..
or try another microSD card..
azian_advanced said:
try reformatting the card..
or try hard resetting the phone..
or try another microSD card..
Click to expand...
Click to collapse
OK, thank you, I'll try.
Obelix2006 said:
OK, thank you, I'll try.
Click to expand...
Click to collapse
Hi all,
I have fixed this problem: Start - settings - System - power - Advanced : do not tick on: Turn off backlight... and turn off device...
Hix, i'm very happy, thanks for your answered.

Cannot get P1000 to host USB

I have an OTG cable, specifically for the P1000, and a simple USB stick will not mount.
I also am trying to mount a USB 3 drive, so not sure if that won't work because of drivers or lack-thereof.
I have a y-cable for the USB 3 drive, and it still will not mount.
I have Cyanogenmod 10.1 running Android 4.2.2
Any suggestions?
TehFonz said:
I have an OTG cable, specifically for the P1000, and a simple USB stick will not mount.
I also am trying to mount a USB 3 drive, so not sure if that won't work because of drivers or lack-thereof.
I have a y-cable for the USB 3 drive, and it still will not mount.
I have Cyanogenmod 10.1 running Android 4.2.2
Any suggestions?
Click to expand...
Click to collapse
Anyone able to help? I'd really appreciate it.
Me too have same problem....

Used USB host fix now I cant connect via OTG cable

I was trying the new version of stickmount to see if I could use it to mount my ntfs drive and was trying out workarounds when I came across a post recommending the use of usb host fix. I ran the app, restarted as directed and voila! Now nothing shows up when I connect my otg cable. I've tried my fat32 hdd which was working fine and a card reader and nothing!
I'd moved from 4.1.2 to the stock german 4.3 rom on my rooted I9305 and paragon's ntfs app would no longer mount my drive so I decided I'd check to see if there was anything else I could do before wiping 900gb's of data and formatting it to fat32. Now I wish I had!
I've contacted the dev and tried chainfire's usb diagnostic app as well as usb host controller - which stated S3C usb host driver not found.
Please let me know your suggestions as I desperately need to be able to connect via my otg cable - my phone has taken the place of my netbook when i travel so that I can backup my photo's and transfer music and movies from my hdd's to the phone. I'm heading out to South America and REALLY need this function back!

USB OTG

I haven't tried to connect a flash drive to my Mi3 yet. Just want to know how it's done and do I need an app or something? I also want to try connecting my 1t external hard disk, is it possible? how?
Thanks!
Yes, it's possible to connect flash drive and it works perfectly with MIUI file manager. But if you want to connect external drive you will need charging cable for drive. And MHL cable (MicroUSB -> HDMI) not working here (It makes me unhappy).
Nyqi said:
Yes, it's possible to connect flash drive and it works perfectly with MIUI file manager. But if you want to connect external drive you will need charging cable for drive. And MHL cable (MicroUSB -> HDMI) not working here (It makes me unhappy).
Click to expand...
Click to collapse
I think i have to look for the charging cable to connect to my USB OTG.

[SOLVED]OTG not working!!! Please help

I've 2 K3 notes and one is rooted and another untouched system.
I've tried paragon ntfs mounter to mount my HDD. Before I used paragon mounter I could get my HDD power on nd get detected as blank media. After using paragon mounter I'm not able to power on HDD or charge any other mobile via otg. I'm able to power on HDD and charge other mobiles with untouched system K3N.
So I flashed stock rom again to my rooted one but problem not solved :crying: please help
Thanks in advance
USB OTG works only for flash medias...it won't work with external HDD (Desktop HDD or Laptop HDD)
freelancer81 said:
USB OTG works only for flash medias...it won't work with external HDD (Desktop HDD or Laptop HDD)
Click to expand...
Click to collapse
I know it doesn't work but it can power up them. Please read the thread again correctly
Why on earth would you want to power up a HDD knowing you can't access/transfer files?
Seems mighty queer to me.
And your topic sounds misleading...are you saying usb flash drives works fine but external HDDs don't work?
Coz thats what OTG is supposed to do...powering external HDD and charging other phones is not OTG.
Anyways...wish you luck and hope some devs help you out.
HDD requires a huge power supply which u wont get from mobile.
common knowledge
Please try anything before answering.
balji3489 said:
HDD requires a huge power supply which u wont get from mobile.
common knowledge
Click to expand...
Click to collapse
HDD works if connected to otg. It is 2TB HDD. My problem solved. Forgot to edit thread

Categories

Resources