Related
I think I've been a total idiot and messed up my HD. I hope there's a way to salvage the situation!
I was attempting to flash a 1.56 ROM so tried to downgrade to SPL 1.54; this was going along nicely until it encountered an error and tried to re-start the flash. Now the device is stuck on "Loading..." before begining the flashing process.
If I soft-reset the device, the SPL has changed to 1.54.0000 according to the Bootloader screen but it says "Upgrade ROM code error Please try again".
I've googled that error message and found a few hits but none of them presented a solution; just people asking this question.
Since that, I've tried to Hard-Reset but it brings me back to the same Bootloader error.
I've tried to flash a ROM but the device can't connect to Activesync to use the RUU_Wrapper and flashing via the BLACIMG.nbh on my SD card won't work either; it just goes back to the same Bootloader error screen and gets stuck on the "Loading..." again.
I've also tried to flash the new HSPL which is 1.56 capable but that suffers the same problem.
Anyone have any suggestions? Please? Never encountered anything like this in years of flashing my Blueangel and Tytn.
Full details from my bootloader screen:
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
Upgrade ROM code error
Please try again
Serial
Please use "Search" function before you posting a new thread.
http://forum.xda-developers.com/showthread.php?t=502167
That doesn't seem to be the same problem as the one I'm encountering. I found that thread via Google as I said I had searched in my post and flashing the stock HTC ROM that came with my device did nothing to solve the problem; 3 machines here, one running XP, one running Vista and one running 7 all fail to connect to the device to allow for any sort of flashing and flashing via an SD card does not provoke a response either.
--Edit--
Sorry - realised that my reply sounded a little stroppy! Blame it on the stress of having a possible brick on my hands! Thanks for the attempt to help but, like it says above, that solution hasn't worked for me
dom_mitchell1 said:
That doesn't seem to be the same problem as the one I'm encountering. I found that thread via Google as I said I had searched in my post and flashing the stock HTC ROM that came with my device did nothing to solve the problem; 3 machines here, one running XP, one running Vista and one running 7 all fail to connect to the device to allow for any sort of flashing and flashing via an SD card does not provoke a response either.
--Edit--
Sorry - realised that my reply sounded a little stroppy! Blame it on the stress of having a possible brick on my hands! Thanks for the attempt to help but, like it says above, that solution hasn't worked for me
Click to expand...
Click to collapse
Have you tried reading cRaCKwHoRe's guide for flashing 1.56 roms. Can be found in my signature. If you follow his steps, you should have no problems
dom_mitchell1 said:
That doesn't seem to be the same problem as the one I'm encountering. I found that thread via Google as I said I had searched in my post and flashing the stock HTC ROM that came with my device did nothing to solve the problem; 3 machines here, one running XP, one running Vista and one running 7 all fail to connect to the device to allow for any sort of flashing and flashing via an SD card does not provoke a response either.
--Edit--
Sorry - realised that my reply sounded a little stroppy! Blame it on the stress of having a possible brick on my hands! Thanks for the attempt to help but, like it says above, that solution hasn't worked for me
Click to expand...
Click to collapse
Hi, dom_mitchell1...did you manager to fix you HD ? I have encountered the "exact" same problem...I went from 1.56 to 1.54...and now I am stuck on the bootloader at "Loading...." If you have a fix...can you please let me know...and save my HD as well....thx
If you use USPL you will be able to flash everything you want.
Fallen Spartan said:
Have you tried reading cRaCKwHoRe's guide for flashing 1.56 roms. Can be found in my signature. If you follow his steps, you should have no problems
Click to expand...
Click to collapse
That's what I was following when things went wrong. Don't know what I did but during the downgrade process the flash "encountered an error" and had to restart....only it never did and just left me stuck in the bootloader with an error message.
It's fixed up now though and I'm running Dutty's shipped version quite happily. To fix it I tried different .msi packages from HTC and eventually one of them managed a successful flash. From there I was able to continue with cRaCKwHoRe's guide.
i had a similar problem i was upgrading to 1.56 so i to my thinking reverted to a stock rom them loaded 1.14 stock spl where my phone started showing the error screen i investigated and found that the stock rom id downlosded from the stock rom section must have been tampered with as the signarure was incommplete. so now the spl was reading 114000... as it was stuck in tri screen the data had loaded to my device it justxwasnt signed so wouldnt work i dowladed the appropriat 1.56 rom from htc which includdes the new 1.54spl started it and there i whent stock 1.56 rom with stock 1.54 spl. i than loaded olinexs new hspl im running vista so had to use the manual tool but othere than that installed ok.
i hope that helped in short as long as ur screen is reading a stock spl u can install an apropriat 1.56 rom from htc i belive the issue is caused by impropper signage of some stuff marked as stock here.
For those who have not checked this out, there is a new ROM available on HTC website>India.
http://www.htc.com/in/SupportViewNews.aspx?dl_id=698&news_id=281
More details click on the above link...
ENJOY !!!
Downloading it now...will update about my experience with it !
EDIT: Faced an error while installing it....posted the details below...CAN ANYONE GUIDE ME HOW TO UPGRADE ROM PROPERLY
can anyone upload to rapidshare?
already posted 2 days back...
check here
http://forum.xda-developers.com/showthread.php?t=566483&page=3
Yes ! can you give a miror ?
http://rapidshare.com/files/2879222...9.707.0_Radio_52.62.25.34_1.13.25.24_Ship.exe
Hi!!! Has anyone tried to upgrade the ROm as yet... Well I have tried and failed. I have HSPL 1.56 Olinex installed and have searched through the WIKI entirely but not gotten anywhere...
The thing is that wen i connect the phone and try to install the ROM, it goes into Bootloader and I get error 202 [Connection error]
I have searched the wiki, but for that error msg, it only says connect the device againa and make sure activesync is enabled...well i have already ensured all the things mentioned but still facing the same issue...PLZ HELP !!!!
blitzkrieg7710 said:
Hi!!! Has anyone tried to upgrade the ROm as yet... Well I have tried and failed. I have HSPL 1.56 Olinex installed and have searched through the WIKI entirely but not gotten anywhere...
The thing is that wen i connect the phone and try to install the ROM, it goes into Bootloader and I get error 202 [Connection error]
I have searched the wiki, but for that error msg, it only says connect the device againa and make sure activesync is enabled...well i have already ensured all the things mentioned but still facing the same issue...PLZ HELP !!!!
Click to expand...
Click to collapse
read carefully this topic.it really helps you.upgrade your hd through uspl 2.5 version.
link
http://forum.xda-developers.com/showthread.php?t=462347
No idea why HTC is releasing this rom now "OFFICIALLY" as they.
The rom date says 17th April, 2009 and this was available at http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe if I'm not wrong.
jatinder said:
read carefully this topic.it really helps you.upgrade your hd through uspl 2.5 version.
link
http://forum.xda-developers.com/showthread.php?t=462347
Click to expand...
Click to collapse
Hi ! Thx for the response, although could anyone tell me whether I can flash another rom even if I have HSPL 1.56 installed and overwrite it with USPL???? or how as I have read the thread mentioned int the above post and it still keeps pointing me towards installing USPL...can smone throw sm more light on this???
USPL Cannot be installed on your phone!!!
blitzkrieg7710 said:
Hi ! Thx for the response, although could anyone tell me whether I can flash another rom even if I have HSPL 1.56 installed and overwrite it with USPL???? or how as I have read the thread mentioned int the above post and it still keeps pointing me towards installing USPL...can smone throw sm more light on this???
Click to expand...
Click to collapse
Uspl is not something you flash on to your phone like the hardspl, it is executed in your windows operating system of your personal computer, it is like a medium which allows to flash unsigned ROMs on to the HTC blackstone a.k.a HTC Touch HD from your computer. If you are using Windows Vista or Windows 7 be sure to downgrade your drivers and disable the driver signature enforcement in vista and Windows 7 and yes you can flash other ROMs by using Uspl even if you have hardspl on your device because it will not overwrite yout Hardspl. Try searching and reading through the forum for the answers. i hope i have shed enough light for you to pass through your problem. have fun flashing. enjoy
Hi to everyone
please help me to fix my Dear X1
for first time i decide to install a wm6.5 rom (FINAL 006 ROM - 015 - 7-1-2010)
i hard spl my x1 and install new rom with X1_CustomRUU and USB cable
when installation finished i see this Error and i can't close it
Error :
Code:
Install
\windows\76_themePack2.cab
failed, code=0x80004005
Try hard-resetting your phone.
If you still have the problem install another rom, using the SD-Card method
a.
vahid67 said:
Hi to everyone
please help me to fix my Dear X1
for first time i decide to install a wm6.5 rom (FINAL 006 ROM - 015 - 7-1-2010)
i hard spl my x1 and install new rom with X1_CustomRUU and USB cable
when installation finished i see this Error and i can't close it
Error :
Code:
Install
\windows\76_themePack2.cab
failed, code=0x80004005
Click to expand...
Click to collapse
rom specific problems are best asked directly in the rom thread, where other users might have encountered the exact same problem and are able to provide quick help or you just find the solution yourself via Search...which is a mighty tool indeed
opening a new thread for every q&a doesn't help keeping the forum in order
alperyasar said:
Try hard-resetting your phone.
If you still have the problem install another rom, using the SD-Card method
a.
Click to expand...
Click to collapse
i try hard rest but problem not solved
buy new phone
dude what kind of reply is that? 'buy new phone' if you want to help him then post something helpful man what if this was your phone, that would be the last thing you would think of...
Tend to agree with DrakenKorin above. No need for another thread. Ask your query in the specific rom thread where others may have encountered same issue
Thread closed
Hi .Greetings.. .I had a problems,read the steps of rooting,flashing tried but none of the tries success.All errors.Had been 4 days.But this phone is different.Had been using other phone(o2 atom),no issue at all.Nearly lose my hope with this phone.
Could anyone guide me steps by steps to get me flashing the stable & fast rom for HTC Dream (HtC HEro Rom On Htc Dream Or other Rom that is Stable & fast)
My Set Model Number
HTC DREAM
Firmware Version
1.6
Baseband Version
62.50S.20.17U_2.22.19.26I
Kernal Version
2.6.29-00479-g3c7df37
[email protected] #19
Build number
DRD20
Thanks.I appreciate everyones help.And thanks alot in advanced.I know this is the best forum for modding Android. Thks.
Need a little more info here... what errors, at what point do you get said errors.
Here's what I've been able to dig up
You need to create a gold card with these Instructions to get access to bootloader. After that, you just need to flash RC 7 (using DREAM.nbh). You can follow the directions here.
Good luck.
MediaWiki internal error.
Exception caught inside exception handler
i can't view it.
How about this?
http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_Rooting
borodin1 said:
Need a little more info here... what errors, at what point do you get said errors.
Here's what I've been able to dig up
You need to create a gold card with these Instructions to get access to bootloader. After that, you just need to flash RC 7 (using DREAM.nbh). You can follow the directions here.
Good luck.
Click to expand...
Click to collapse
i 've tried rc7 & goes into bootloader.white screen stated 00028o02
not allow for few second then goes to a rainbow screen.
confused..what should i do?
Pls Help Me !!!
had been for weeks,i tried to search up & down on the net.cant find the way out of this.nobody wanna help me out of this.i'm confused.i appreciate if some one can guide me.drop me the link.i 'm a baby to the android.
nobody wanna help me?
Hi guys
I'm new to this section of the forum as I just received my Legend today. I've had my Magic since December. In the Magic forum there are a lot of sticky threads with guides to rooting etc. I can't seem to find any here though. I've tried to use the MoDaCo guide but I've ran into some problems.
See the topic here: http://android.modaco.com/content-p...-guide-now-with-1-31-x/page/580/#entry1366357
Phone info:
LEGEND UNKNOWN SHIP S-ON
HBOOT-0.43.0001
MICROP-0816
TOUCH PANEL-SYN07_0103
RADIO-7.05.35.26L
Thanks a lot!
Hi I had a similar problem as you, so i flashed official 2.03 ROM and used it until those amassing guys found a way to downgrade back to 1.31 and then i decided to try once again. And guess what? It worked! After downgrading and re-creating gold card i was able to root my Legend. Try to do the same, maybe that will work for you as well.
AllWin said:
Hi I had a similar problem as you, so i flashed official 2.03 ROM and used it until those amassing guys found a way to downgrade back to 1.31 and then i decided to try once again. And guess what? It worked! After downgrading and re-creating gold card i was able to root my Legend. Try to do the same, maybe that will work for you as well.
Click to expand...
Click to collapse
Well, I'm still at 1.31.x. I created a goldcard successfully and used it for Step 1 of the MoDaCo guide, but it said I needed regular SD card for Step 2, so I reformatted it and I'm stuck at Step 2. It won't load the custom recovery
take the update.zip from fake-flash
http://koush.tandtgaming.com/recoveries/recovery-clockwork-legend.zip
copy it to your sdcard
boot with volume down and goto recovery when exclemationsign press vol up and power, and you should be able to get update.zip running
snakehult said:
take the update.zip from fake-flash
http://koush.tandtgaming.com/recoveries/recovery-clockwork-legend.zip
copy it to your sdcard
boot with volume down and goto recovery when exclemationsign press vol up and power, and you should be able to get update.zip running
Click to expand...
Click to collapse
Thanks a lot! Now I'm able to boot the Clockwork Recovery I though you had to have root to run it. Now let's see if I'm able to flash a custom ROM.
you have root, the "step1" took care of possible to flash a rom with su
i tried to root my legend several times but it doesn´t work
i´m now at 1.31.177.3 rom and 430..01 bootloader, 've made a goldcard 3 times now but everytime there is the same problem...
starting pauls r4 step1-windows.bat in the cmd and it always hangs on writing 'zip'..., could it be that my sdcard is not 'allowed' to be a goldcard or something?
Legend Root Step 1
Erasing cache and rebooting in RUU mode...
erasing 'cache'... OKAY
... OKAY
About to start flash...
< waiting for device >
sending 'zip' (121756 KB)... OKAY
writing 'zip'...
Click to expand...
Click to collapse
i hope u guys can help me
xennr3 said:
i tried to root my legend several times but it doesn´t work
i´m now at 1.31.177.3 rom and 430..01 bootloader, 've made a goldcard 3 times now but everytime there is the same problem...
starting pauls r4 step1-windows.bat in the cmd and it always hangs on writing 'zip'..., could it be that my sdcard is not 'allowed' to be a goldcard or something?
i hope u guys can help me
Click to expand...
Click to collapse
Are you experiencing any problems when creating the goldcard?
Try this tool for easy goldcard creation: http://android.modaco.com/content/software/308798/pc-application-goldcardtool/
hi,
I tried this tool the first time but after clicking patch mmc i always get 'An error occured Object reference not set to and instance of a object.' So i created the goldcard by myself with the modaco guide.
Today i tried this tool over at another computer and created the goldcard successfully but the .bat also stuck at the same point...
Not running windows 7 x64?
Had similar problem on my computer/phone for some days ago
But then I tested on other computer with windows xp and all worked.
No i have on all my computers WIN7 32Bit.
I thougth i could test the r4-root at the computer where the goldcard tool already worked and yes, its looking good so far (step1 complete)
I don´t know why nothing worked on my computer but its okay when it works on another haha
xennr3 said:
hi,
I tried this tool the first time but after clicking patch mmc i always get 'An error occured Object reference not set to and instance of a object.' So i created the goldcard by myself with the modaco guide.
Today i tried this tool over at another computer and created the goldcard successfully but the .bat also stuck at the same point...
Click to expand...
Click to collapse
Did you also run step1-windows.bat on the other computer? Is ADB and fastboot working?
as u can see one post above step1 worked fine und also step2 is completed
xennr3 said:
as u can see one post above step1 worked fine und also step2 is completed
Click to expand...
Click to collapse
Great I never got step 2 to work, but I just installed another ROM.
Sent from my HTC Legend using XDA App