It is possible to change the properties of button in original headphones from htc?
When I press 2 times very quickly my htc rings and it's very annoying because it's rings when I e.g. listening music.
kolarz20 said:
It is possible to change the properties of button in original headphones from htc?
When I press 2 times very quickly my htc rings and it's very annoying because it's rings when I e.g. listening music.
Click to expand...
Click to collapse
I think its possible. I'll look into it.
Same look alike problem
I think i broken my headphones. Whenever i plug them in , the slightest move turns into my phone calling the last person i called or called me or going into Voice Dial . So i have to call a fake number every time i plug them so it won't call from my pocket, very very annonying.
What can be made to disable this type of calling .. i don't know if the button is the problem .
So nobody can solve this problem ? I write some questions on other forums but nobody give any solution.
Related
I've got a wav recording of my baby laughing as my SMS incoming message sound which is around 10seconds long.
In my old sony ericsson phone (ordinary phones), whenever I receive a message, I just press any button and it stops the sound. I love the longer sound but on certain occassions, like in my office, I would like to turn off the sound using a single button.
With the Kaiser, I tried to press all buttons but it can't be silenced right away. It has to play the recording until the end. My option is to go to the HTC home plugin / audio, then set it to silent mode, which may take a little longer, or I just try to cover the speaker with my hand. biggrin.gif
Would you know of any shortcuts to stopping the sound?
Thanks.
Have you tried moving the wheel on the left down-wards?
Thats what I do when my phone "rings" when someone calls... just knock the wheel down and it silences it
tried it, didn't work.
thanks..
Same here. I chose a song as my incoming SMS that was 3 minutes long. I had to go to the notification settings page to silence it.
Any help would be appreciated.
As the guy above said, scroll the wheel down a turn or two. That silences incoming call alerts.
(And a 3 minute song as a ringtone is not the best idea. Edit it down to 20 seconds)
unwired4 said:
As the guy above said, scroll the wheel down a turn or two. That silences incoming call alerts.
(And a 3 minute song as a ringtone is not the best idea. Edit it down to 20 seconds)
Click to expand...
Click to collapse
That didn't work for me with SMS. I scrolled down, up and hit every button on the device and it still wouldn't work. I edited down to about 10 seconds. That's well long enough for an SMS.
same problem
I’ve the same problem with my tytn.....if I don’t have a long sound I don’t see a new sms or mms even if sometimes the short sound it’s better!
also I’ve tried all buttons but they wouldn't work!
So...if don’t have any hardware solution…could I have some chance for a software solution?
How about just leaving you phone on vibrate when at work instead of disturbing everyone around you
Easy solution to you problem and your coworkers will probably thank you for it...
Or you know, using Audacity to pare down the length of the sound file?
thx for the answers....
i work in a lonely room...and the song volume isn't a problem...but i leave the phone everywhere...so i would like to stop the music sound when i've find the phone and i've read the new message!
or any on screen buttons in the HTC dialer. anyone know how to get rid of it? its supppper annoying
A little more information would be helpful -
1. does this tone happen when you press a button while on a call?
2. if it does - does your other party hear it or only you?
3. what buttons does it happen on touch screen buttons or only the buttons on the front of the phone?
4. is this when you have speaker phone on or a headset or simply using the phone?
5. is it only when you hang up or any button at any time while on a call?
6. do the buttons make normal sounds when you are NOT on a call?
7. have you turned off sound on your buttons - have you at least tried this to see if it kills the problem?
Bill
when in the dialer go Menu->Options then Keypad: Off
ahh keypad tones off got rid of the annoying beep lol thanks! wish there was a way i keep the beep for the numeric keypad without the obnoxious beep that came out of the speakerphone part rather than the ear piece when backspace/ call history/ speed dial is pressed
jut realized it still makes the annoying noise when it connects to a call
i found that someone had my exact problem on a wings smartphone. they edited the registires in order to turn it off. i played arround with mine all day but no luck. here is the thread if anyone can apply it to a kaiser id be very greatful!
http://forum.xda-developers.com/showthread.php?t=356416
I love this bluetooth headset. I was in a really noisy resturant, my friend could not even hear the noise on the other end. This jawbone has some serious noise cancelling technologies. Then I went into the bathroom where the music was insanely loud (mexican mariachi stuff) and still friend couldn't hear any music at all.
Weird but cool.
But when I press the button on my headset to hang up a call, it tries to open up the voice recorder/voice calling app on the tytn2. Very annoying.
Do any of you know how turn off this feature? I just want to stop the call. Thanks.
All I can say is that it isn't normal behavior...sorry.
I see that behavior all the time with 2 Jawbones, push button to end call, the call ends but voice dialer opens. I just keep quiet and it cancels itself, very irritating I agree.
RemE said:
I see that behavior all the time with 2 Jawbones, push button to end call, the call ends but voice dialer opens. I just keep quiet and it cancels itself, very irritating I agree.
Click to expand...
Click to collapse
Never heard of that problem. MAybe its the dialer or even the rom ur using to cause this problem? Have u tried a different rom with ur bluetooth? Also try to install a different dialer and see if that helps. My jawbone works perfect on my att tilt!
deeznuts said:
Never heard of that problem. MAybe its the dialer or even the rom ur using to cause this problem? Have u tried a different rom with ur bluetooth? Also try to install a different dialer and see if that helps. My jawbone works perfect on my att tilt!
Click to expand...
Click to collapse
You using stock ROM or custom ROM?
this happens to mine as well. From what I've observed, it seem like a delay of some sort when you press the button to hang up, and then the call has already hung up on the other end, and instead of hanging up the call, the phone will just turn on the voice dialer.
it is almost certainly what fakts13 posted as a cause. I've never seen mine launch the voice recorder when hanging up from a call.
It is exactly what fakts13 said. A single button press on the Jawbone can answer or hang up a phone call, but it will also activate voice dialing if no phone call is active. The only problem that you are experiencing is that your other caller is hanging up before you, so there is no active call whenever you press the button on your Jawbone. Since there is no active call, the button press launches Voice Dial on your TyTN II. You could always disable Voice Dial altogether if you never use it.
Hi All
I recently lost my ringtone and found a solution on here, so all is fine.....EXCEPT when the phone rings, the ringtone disappears when the scroll wheel (if that's what it's called) is moved.
Has anyone else come across this problem and if so found a fix???
The phone carries on ringing silently if I move the wheel, it's just the sound that disappears and that's obviously not very good if it's in my pocket!!
I've tried pressing all the other buttons when it's ringing to see if they make the sound disappear but they don't, it's only the wheel
Any one got any ideas????
Thanks
That's not a bug.
That's a feature...
My TyTN1 did that.
My P3600 did that.
My TyTN2 Does that.
It's the only way of making the phone go QUIET without canceling the call.
Quite usefull actually....
Honestly!!??
It's a feature??
How do I turn it off????
I like that feature very much, too. When someone calls and I don't want to talk to them I just hit the scroll wheel to silence the call but let it continue ringing for them. That way they don't know I'm ignoring them. I can plausibly be out of range of my phone or some other excuse. If you press the end key or hit "ignore" on the phone screen it sends the call immediately to voicemail and the person on the other line can tell they've been actively ignored...
I don't know if it's possible to turn it off.
ive always found it usefull. but sometimes it can be annoying as OP said when its in your pocket
livefastdiefun87 said:
ive always found it usefull. but sometimes it can be annoying as OP said when its in your pocket
Click to expand...
Click to collapse
The beginning of every sad story I've heard about screen cracks and phone damage, has always begun with , Well the phone was in my pocket and..............
When I pull my phone from it's padded holster I always look at the caller id first and do not wish to disturb other people while I decide. I appreciate the feature
I'm guessing it's a feature that can't be turned off then
Hi,
Good day, I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Thanks a lot.
Hi,
Also, I remembered something I want my mobile to vibrate then ring but I think it's not doing this with all contacts sometime it's ring sometime it "vibrate then ring"
How can I solve this ?
Desigen said:
I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
Click to expand...
Click to collapse
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
Click to expand...
Click to collapse
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
Click to expand...
Click to collapse
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Click to expand...
Click to collapse
If you're expecting to receive calls through it all the time then you need to have the TyTN IIs bluetooth enabled all the time, how else is it going to communicate with the phone otherwise? To anticipate your next question, yes that uses lots of battery power so you may need a spare battery or two when you're out and about handsfree (or you could just use the wired headset that came with the phone for no additional battery drain).
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Flying Kiwi said:
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
Click to expand...
Click to collapse
Hi, when I want to reject the call I mute the phone by using the wheel button then press the red button "reject button" or touch the screen on "reject" word. None of the above work. They all failed. The phone not ringing but the call doesn't end. This happen from time to time. Not always.
Flying Kiwi said:
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
Click to expand...
Click to collapse
Yes, my ROM is WWE and I installed FJE application and I want the default input method to be Keyboard.
Flying Kiwi said:
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
Click to expand...
Click to collapse
No problem, I attach the two error I get
Flying Kiwi said:
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Click to expand...
Click to collapse
I don't have any contact with special ringtone, all my contacts are Outlook.
Regards,