to the experts. I've installed more than a rom, every time you can not find the camera and it works. When I start to work give me a white screen or black by chambers of the screen and then return to normal screen.
Could you please be more specific ?
thank u my proplem is hard ware and iwill fix it soon
Related
Hi Guys,
My apologies if this has been posted already, but I couldn’t seem to find anything on it.....I have had my Diamond for about 2 weeks and the camera hardly ever works. 90% of the time when i start it all i get is the Photo logo and then a blank screen. If i push the capture button, a few seconds later I get the error "Unable to capture photo. Unable to get frame data from camera device". I have done the latest HTC official update to ROM 1.93, I have soft reset and hard reset and no luck Sometimes if I do a soft reset it will work for a little bit and then just stop working again.
Any advice would be greatly appreciated!!
Thanks
Grim
you may need to install one of x-dev custom ROMs, or try hard reseting your diamond. if the problem still exist after Hard Reset, probably it is hardware trouble.
read read and read before you install Cooked roms from xda-developers. you need to do HardSPL before instaling any other ROMs
Thanks for the response!
I have hard reset the device a few times, and no luck. I dont reallt want to install a cooked ROM, I dont think I can handle it to be honest. I will take it that it is a Hardware fault and I will be sending it back tmrw. Thanks again!
Hi Grim! I have the same problem. I've installed 1.93 official ROM and even SwiftBl 7.5, I've upgraded my Radio From .05 to .08 , but my camera is still like yours.
Have you find a solution? Did HTC service Center change your device?
Thanks..
İ have the same problem and could not find a solution for it...
Dear All,
I have same problem. Camera crashes after 1 or two photo. I have black screen.
Tried many Rom's. no fix .
How could you fix ?
anyone got a solution for this problem?
is the diamond camera hopless?
no solution for this error till now?
This issue realy bugs me now. Every time I've change the OS it work for a bit then it dies. realy anoying. Anyones suggestion may be usefull.
If it is the hardware - is it the camera? Could it be just gone loose?
There´s few steps to take.
If camera works sometimes, I think, it´s not a camera problem on itself.
(IF YOU HAVE ACCESS TO PARTS AND YOU KNOW WHAT U`RE DOING)
Try this:
Exchange flex and flash (use official RUU htc).
Or:
Put phone inbootloader, disconnect flex from board (while working and booloader on) and flash.
If everything else fails, I´m affraid the PCB has internal flash IC problems.
Dont have parts but will open it and check flex. If flash is gone how come mtty does not flag some segments as bad. Checking around the web looks like I am not the only one with this problem.
all you Coders... please help us with the camera issue.
Hey guys..
this camera for touch diamond is screwing..
tried various methods.. flashed everything possible..
still no luck..
if any xda user outthere.. who has the solution for this problem..
please help up..
my device is out of warranty..
thanks
I've found out if you take the battery out for 10 secs and put it back the camera works again untill you run another app. It feels like as soon as you run something else with camera it is screwed!
Hi all,
I have a T-mobile wing and it has the stock rom on it. Also, it is not hard spl anymore. I used to have open touch 6.1 lite diamond. The phone turns on and makes the keyboard sound. When it turns on there is a white screen but if you move the screen out so that the keyboard is visible you can see a discolored screen with windows mobile on it. Also, you cannot use the touch screen. The farthest you can get is the welcome screen that has the align screen but it wont align. Would anyone be kind enough to please help me with this issue. I greatly appreciate the help and great thanks to all in advance. I have read around in the forums and it says to buy a new screen, a digitizer, or fix the display drivers. I currently think it might be a software problem but I do not know where to start. Again any help is appreciated and thank you all again in advance for your help.
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
obsidian06 said:
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
Click to expand...
Click to collapse
Thank you very much for responding. Yes, I have let the unit warm up. At first this problem went away but it came back after. What do you mean by display drivers? Do you think I should hard-spl again and try a new rom? And if that doesn't work, should i open up the unit and see if the cable it tightly attatched? Before the discoloration, I was able to use my phone with open touch 6.1 lite, but there was a white screen when the keyboard was not visible. Also, when i moved the keyboard, the phone would work by allowing to me call and text but it would freeze a lot. I hope this clarification helps.
Mod please move to herald section because this topic may or may not pertain to herald mobile 6.
Would anyone please help me I would greatly appreciate any advice, thanks in advance to all. p.s. I added pics and the touch screen doesn't work, the physical keys kind of work when the screen is viewable.
Reply please!
did you ever figure it out!? oh wow finally i found someone with a similar problem. my wing was in my pocket at work when the first similar signs arose. ITS PRACTICALLY BRAND NEW! it did that for a while and now the screen is just all white=( PLEASE help! anything would be good. i just want to know if its fixable or should i just get a new phone. you can email me too at [email protected]
Hi all, please please help me. Every time I start my phone it shows the normal screnn with SPL 2.0.. screen and then the three colured screen. It doesnt go pass it. What can I do ? please please help me.
All these happend after I took it for screen repair, It worked good for a month then the screen would freeze from time to time. Now, it doesnt start. HTC shops around here dont know how to help me.
Lincoln N
nokolg(at)tuks(dot)co(dot)za
University of Pretoria,
South Africa
First step:
Try reflashing your device. If it doesn't stop after complite flashing, you have hardware problem
Its urgent plzz help to get out of this
...........................
PLEASE share your experience to get Rid of Black screen recovery,in Wildfire s (Marvel).
As i experienced many wfs are working like charm,
But the newly manufactured Wildfire s are not capable of displaying cwm custom recovery,EVEN Then working inside with the four lighting white keys.
I have written a post A guide to work with black screen here
http://forum.xda-developers.com/showthread.php?t=1725398
**********************************************************
Htc has changed something?
WHY we are facing this Problem?
I have even installed the oldest OFFICIAL RUU 1.35 which is booting with white htc screen and goes black again,The booting sound comes out With full os working inside,without displaying anything.i have even received calls with that black screen.This confirms Its working inside,(but not displaying anything)
(This is the only catch which our developers have to Flash Some LIGHT)
Me and many friends in this forum are suffering from this great BLACK SCREEN From past 4 to 5 months
Please come and share your opinion.
I can do it
Good news for us , I have three way to sove this problem.
log files
I've attached two log files here http://forum.xda-developers.com/showpost.php?p=28793853&postcount=8,maybe helps.
gq455402012 said:
Good news for us , I have three way to sove this problem.
Click to expand...
Click to collapse
what are they can you explain?
hi all,just got a gt s6500 for my son. Replaced the LCD screen which was broken,replaced the touch screen as well,put the phone back together,phone boots up normally ,but nothing happens when you touch the screen. No response from it at all. i am now out of ideas how to get the phone to work. Anyone with any idea how to get it up and running again . Any help would be gratefully received. Thanks for your time.
Maybe u need other drivers for the new touch screen, but i dont know how u can install drivers at android?
crazy trucker said:
hi all,just got a gt s6500 for my son. Replaced the LCD screen which was broken,replaced the touch screen as well,put the phone back together,phone boots up normally ,but nothing happens when you touch the screen. No response from it at all. i am now out of ideas how to get the phone to work. Anyone with any idea how to get it up and running again . Any help would be gratefully received. Thanks for your time.
Click to expand...
Click to collapse
There is a new thread in the general section on how to fix your phone touchscreen which should work for you .
Here is the link - http://forum.xda-developers.com/showthread.php?t=1505412
Hope it works :fingers-crossed:
Press thanks if i helped you.
crazy trucker said:
hi all,just got a gt s6500 for my son. Replaced the LCD screen which was broken,replaced the touch screen as well,put the phone back together,phone boots up normally ,but nothing happens when you touch the screen. No response from it at all. i am now out of ideas how to get the phone to work. Anyone with any idea how to get it up and running again . Any help would be gratefully received. Thanks for your time.
Click to expand...
Click to collapse
I'd recommend to check if the touchscreen you replaced with, is a faulty one or not.
Or maybe the reason would be about the connections. Just open the phone and reconnect the pins and try again. If still doesn't work, try my first point.