Database Develop

Really annoyed:

I purchased the motorola HS850 a couple of days ago, seems pretty good paired up sraight away.
Problems are as follows.
The BT headset can't be used as a microphone for recording your voice, and/or giving commands to Voice Command software!!! Also i cant work out what pressing the button once quickly when not on the phone does. On normal mobiles you can announce a voice tag and it will dial the number. On the PPC (XDAIIs) it changes the icon of just headphones next to the start menu to headphones with audio coming out. Any ideas what this does? seems to create a connection to the decice, but still does not pick up audio from the BT mic!! One last thing is, on normal mobiles the HS picks up button presses etc, throught the BT speaker. No it doesn't even do that with PPC WM2003SE!!!
So in short the unit is pretty useless apart from answering calls by tapping the button on the headset. Kind of defeats the idea of a Btooth headset. Surely you would want to dial out using its built in mic? Am i just been stupid here, or should any of the above work?
Any workarounds or software that will work with BT Headsets? If not does anyone want to buy this from me for a fair price??? I mean what is the point? Can people tell me there postive uses please, or explain what im doing wrong!!! Surely if a crappy £50 mobile can utilize the features a £250 ppc should be able to, i mean come on!!

Anyone? I'm sure someone out there knows a little more about this than me? Im after some info!!!

I guess the answer is to buy the one designed for the device from O2?

As far as i know from the research i have done, it doesn't matter what h/set you have got!!

Matt
You are unfortunately right that ypu cannot control Microsoft Voice or therefore autodial with ANY headset at present. This is apparently due to the Widcomm Stack implementation (They haven't coded that part yet!).
Most users will also have difficulty with (System) sounds from the IIs presented on the headset. I believe that the new High Quality Stereo Stack has now been implemented but works with only a few headsets.

Where can the new stack be found from? or is it the 3900 stack?

I was led to believe it is in the 3900 stack but there was a CAB file floating around a while back for it (Never tried it myself so can't be of much more help I'm afraid!)

Thanks bebbo, anyone got further information on this problem at all?> I would like to get to the bottom of it, as their are hundreds of these kinda posts around all with no definative answer....Come on lets solve this and put an end to peoples suffering..... (MINE TOO!! )
Anyway, please post any information you know!!

At this time there are NO headsets that provide this function that I am aware of. If you highlight a contact,you can push and hold the headset button until it beeps and it will dial that contact.I was considering switching to the Nokia 9500, but it does not have that function either.
Maybe in the future,but not right now........Later
mattwaddy said:
Thanks bebbo, anyone got further information on this problem at all?> I would like to get to the bottom of it, as their are hundreds of these kinda posts around all with no definative answer....Come on lets solve this and put an end to peoples suffering..... (MINE TOO!! )
Anyway, please post any information you know!!
Click to expand...
Click to collapse

Tmo Wing Bluetooth problem

for some reason with my bluetooth headset turned on as i try to locate my device even though they're side by side it can't locate and pair with both devices.
Edit.. Sorry i just fully read the bluetooth manual and its required that you hold the task button down for 8seconds so that it maybe recognized by other bluetooth devices.
Posted incase anybody is as ignorant as myself

wow i bet u dont have the visibilty on

Enable A2DP and/or headset profile for Tilt...

Hello everyone...sorry for bothering, but I'm so frustrated that I'm about to scream...I really need some help here.
I have an AT&T Tilt (Kaiser) running their standard ROM. I just bought a Motorola H780 bluetooth headset for it. The salesperson said that he knew of some people who connected this model to their Tilts and was able to listen to music through it...and even on earpiece box it says that the H780 supports both the Hands Free and Headset profiles. However, I have not been able to accomplish this: it pairs for normal use (phone calls, etc), but nothing else. The "wireless headset" option is greyed out for me; the earpiece only gives me the option to connect using "Hands Free" profile.
I have looked...and looked...and looked for how to do this. The best I found from Google was for people who have Windows Mobile 5 (I have 6)...and even so, I tried a couple of those registry tweaks. On here, I keep running into countless forums that tell you, not how to enable A2DP, but how to improve it (using modified bitpool value in the registry, etc). Can SOMEBODY PLEASE tell me how in the world to get this working? I would really appreciate it...THANKS!

Well this is how i do it. I downloaded this http://www.teksoftco.com/index.php?section=freeware
that is the page then you get a2dp toggle
and then when my bluetooth is on the the headset is on i then go to this program and double click it and it puts another icon by the bluetooth icon and i get sound that way for my music and also calls still come threw too. I am not saying this is the right way but it works great for me...

bluetooth toggle
bluetooth toggle turns on the headset (single ear normal everyday talking sets) like a speakerphone.
all audio will get directed to it, im, e-mail, meeting announcements.
I had a sony headset model, with 12 talk time, nice because it will eat your battery while on ( tilt and headsets rated for talktime will apply to this ) . my plantronics only does 4 hours, so at lunch or when not in use I charge it and phone via usb cable.
I am in IT and most peaple are ok with me wearing bt headset (plantronics 655) and write me off on the gadget side when I wear it 24/7. In reality I listen to music (10% volume on audiomanager) all day (literally) from my 8 gig card.
I have streaming and resco radio, and podcasts. Mostly I converted my common mp3s to wma to have more on the phone and high audio cd quality is not to be expected over bluetooth. The right rom and radio are very helpful and the ability to tun off screen but still play music are all important or battery will suffer even more. using the stock rom and radio will work, just not a good balance team.
duttys roms and a few others had it included btw. I found a way to use audiomanager 1.2 on the new roms with 1 registry setting change to allow suspend mode.
I use a very simple version of it. I attached it because, I searched a bit to find a link, (still recommended for education on the subject) but didn't find it or in the chefs and mods downloads either.

Thanks to both of you for your responses! I appreciate someone taking the time out to help.
Blinkste21957, I tried your solution and it didn't work...for some reason, it saw my headset as being "unusable" (my term) with regards to headset mode. I don't quite know why; my headset clearly says on the box that it is. (Motorola H780). This is why I think that there must be something missing on my phone that will enable the "headset" option for my earpiece.
Acehole, I tried your solution a while back...but it was with the 8525, not the tilt, and with my (previous) plantronics headset. I was less-than-impressed with the problems I had to deal with last time...but I could give it a whirl again with this phone/headset and see what happens.
If anyone knows of anything else I'm missing in terms of "activating" the headset capabilities of my phone (which I thought was supposed to have A2DP), let me know. I'm just very puzzled why, for an earpiece that supports headset mode, my phone would have that option unavailable.

Actually, I think that it is the phone and not the headset. When I had a nokia I was able to listen to music via my bluetooth with no issues. The tilt will not allow you to do this without the use of a third party application. The following is what many people have used and are using as a work around. BTAudio, BlueMusic, A2DPToggle. Tech soft makes BlueMusic and the A2DPToggle and can be found here: http://www.teksoftco.com/index.php?section=products. Unless one of the bright developers here on XDA takes this on, I fear that it will never truly be resolved.

Thanks ACEHOLE.. I was struggling with my iMate.

Someone on here recommended the Sony DR-BT22 some time ago. I bought a pair and they link up and sound is impressive on the Tilt with Windows 6.1
http://www.bestbuy.com/site/olspage.jsp?skuId=8458466&st=bluetooth&type=product&id=1184369168158
I can also control forward and reverse functions of the player with them too.
Bluetooth - especially compatibility - is still one temperamental beast! My car's built-in hand-free made me and the poor guy from AT&T a believer. They can plaster A2DP, HSF, HDP, ESP, JMDP, whatever on the box and it it means squat as to whether it will work or not. Only ones that do are manufacturer-to-manufacturer....sometimes.
Mack

If you have WM 6.1, and if you have a headset with the A2DP profile (NOTE this is not the same as the "headset" profile) then you can listen to music without any problem. If you don't have both, then you need to mess with the software add-ons mentioned earlier in this thread .
As for me, I got the excellent Jabra BT8040 and it works great with My Kaiser with stock 6.1. Only about $30 too.

Bluetooth Headset Audio

Hello all
I recently put 4.2.11.1 on my G1. Now when I pair my headset with the phone. The audio is still transfered though my phone. Is this a known issue? is there a fix?
Tech Specs
Handset: G1 w/Cyanogen 4.2.11.1
Headset: Samsung WEP470
The headset worked fine with stock 1.6
The headset appears to pair fine, even verified the bluetooth 'button' is selected while in a call. Still audio goes through the handset and not the headset.
This really is my only issue I love cyanogen so far and hope that the Nexus One is cracked fairly soon after release.

I have the exact same issue with a parrot ck2100-bluetooth hansfree, also running latest cyanogen

I've had this issue and other Bluetooth audio problems under the last several CM releases (See http://code.google.com/p/cyanogenmod/issues/detail?id=819). When audio fails to go through the headset as you describe, turning the headset off and then on again often fixes it. If that doesn't help, then turning the headset off, toggling Bluetooth off and then on, and then turning on the headset usually works.

hrmm, hope this can get fixed I may have to abandon Cyanogen. I have to field call via bluetooth when I work from home.

usually this happens once a week for my bluetooth if i keep toggling BT on and off several times (usually do it if i forget my BT headset). easy fix. not a serious problem with me.
like the person above said: just turn toggle BT off then on, it should connect fine. if not, what i do is go through the settings and unpair them and pair, it should connect to the phone's audio. rinse and repeat.
not a serious bug that should keep anyone away from a certain rom... especially Cyans

Yall in the wrong forum ppl
If its an issue concerning Cy's rom go in his thread n follow the link to submite the issue.
If u trying to solve the problem go in Q&A and ask there or CY's thread.
This has nothing to do with development.

moved to Q&A

I am also having this issue.
I am having a parot c3100 and it pairs fine. But the sound is send to my phone instead of over my car audio system.
I tried bluetooth+headphone fix, but that doesn't help either.
It looks like every cyanogen (based) rom does have this issue ....
Does anybody have other ideas to get it fixed ?

Nexus 6 Headset Button Problem

Hello,
I have the Nexus 6 for the last month now. I was using the phone when I noticed that the headset buttons does not work.
If I press a headset button while I listen to music, it will not stop the music but instead it is going to open Google now commands.
Same issue when I try to answer a call.
I have tried several apps from the market, but none of the seem to fix the problem.
I have tried disabling the Google now, but when I hit the button, it goes to voice search again.
I think that the Google now only listens to the headset buttons and I want to fix it.
Can anyone help me fix it?
Thank you in advance.
PS: I have read and tried the things other threads was saying and nothing seem to work.

I can't really help but I am pretty sure it depends on the bluetooth device.
In 1 car when I push the call button (stand alone device) it forces you to make calls in a strange interface that only makes calls. It has a different put for play/pause
In my other car (built in bluetooth) it does google now (which in my opinion works a lot better) and then it has on screen play pause.

Sleeepy2 said:
I can't really help but I am pretty sure it depends on the bluetooth device.
In 1 car when I push the call button (stand alone device) it forces you to make calls in a strange interface that only makes calls. It has a different put for play/pause
In my other car (built in bluetooth) it does google now (which in my opinion works a lot better) and then it has on screen play pause.
Click to expand...
Click to collapse
I was referring for wired headset.
I have not tried it to a Bluetooth device .
Thanks for the answer.