Database Develop

3G Issues still - Help needed!

Hey all,
I've had my TyTn II for a while now and everything's been ok.
I recently upgraded my rom, from an old Duttys rom to a new one, since doing that my phone would not pick up signal at all - I couldn't phone and people couldn't phone me - it looked like my phone had reception but the second I went to call all the bars dropped off.
I posted on here. - It's the radio people assured me. I swapped radios. 1 million times.
Everytime, the 3g would work for a few hours and then the same problem.
I decided it was the rom. I installed a different duttys rom yesterday, and low and behold, the phone worked. Calls, tinterwebs the works.
Got home. Same old problem.
The one thing that links the roms is they're both Windows 6.1.
I'm using a MDA Vario 3 on T-Mobile UK.
Can anyone help me?

31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!

bazzlad said:
31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!
Click to expand...
Click to collapse
If you want to stick with WM6.1 do as follows:
(i hope you've got HARDSPL...)
Run the TriColor mode and install radio same as i do (signature)
when it start to restarts hold the camera button so you can boot tricolor again without loading rom.
Install your favorite ROM,
When everything is configured, run Connection setup again and restart your phone. Test it.
If it still doesent give anything it could problem with some third party apps or your device itself.
You can try my configuration it works perfectly for me.
Cheers,
Chris

Giving that a go today - will chuck you over some $$$ wonga if it works! Thanks.

I hope that everything will work fine for you. Im always happy to help.
Cheers,
Chris

Tried - No joy - but thanks - anyone else got any ideas?

I have a similar issue. On my 3rd phone now (Orange) due to phone not connecting in 3g mode to make calls. Seems to be an issue where it fails to switch automatically between GSM and 3G, although it often shows there is a network connection (even though there isn't - really anoying).
However, by turning off hsdpa it finally seems (6 hours or so) to stay connected to the network and able to make calls. Can anyone else with the same problem try this?
I don't enough about hsdpa to understand why having it switched on should make a difference, unless it changes the functionality of the radio. Suggestions welcomed.

You may have a faulty handset.
Exactly the same problem as my friend experienced with his MDA Compact 2. I tried flashing new ROMS and it seemed to fix it but in time he'd begin to suffer from a disappearing signal bar and random dropouts before, during and after calls.
You could try turning your network to GSM only and see if that makes a difference. I'm on T-Mobile and I know that last week I couldn't use my phone in 3G mode for 36 hours or more owing to a network problem in my area, gsm worked fine though.

not convinced about the faulty handset although it is a possibility.
I am starting to think that with the hsdpa enabled it somehow changes the way data and voice calls are handled.
Really could do with some opinions on hsdpa and whether enabling it or disabling it changes the functionality of the phone or the interaction with the networks

bazzlad said:
31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!
Click to expand...
Click to collapse
Just search a bit in the Kaiser forum, quite a few people (including me) have had similar problems. Radio hardware on some units is faulty and requires return to service center for repair.
The radio starts by not being able to send/receive calls/data on 3G while it still works on GSM, then later GSM will eventually fail too.

T-mobile have had problems with there 3G in the last week in northern Uk. I am still getting a few problems each day as you describe. I dont know, but I am assuming they are doing some repairs

kilrah said:
Just search a bit in the Kaiser forum, quite a few people (including me) have had similar problems. Radio hardware on some units is faulty and requires return to service center for repair.
The radio starts by not being able to send/receive calls/data on 3G while it still works on GSM, then later GSM will eventually fail too.
Click to expand...
Click to collapse
Still, my experience is that there maybe faulty hardware out there, but by disabling hsdpa everything is fine. I'm currently making plenty of calls on 3g network, dowloading lots of data on 3g network. My previous problems were when the handset showed it was connected to the 3g network when it wasn't able to take or make calls or download data. Before, the only thing I had tried was manually selecting GSM in the connection settings.
I'm not saying that disabling hsdpa is a good thing or a solution, just that it might help some smart person to identify what is going wrong.
Any help out there?

FRF85B radio breaks AT&T 3G?

Well I don't know what to make of this. I went back to a stock recovery image. Manually downloaded the a EBF54B images zip, fastboot flashed all the images, then manually applied the FRF85B update...
Well my 3G (in Salt Lake) is all screwed up, 3G icon appears, but can't get any damn data. Browser not working, martket doesn't work, can't sync.
I was originally running a rooted version of FRF85B that someone had provided and was having major issues with the Froyo radio as well yesterday.
Anyone else on AT&T hating life? 2G seems to work just fine.
EBF54B seems to sign in and work fine too.
I should mention this seems to be partially intermittent. A page will occasionally start to load and then stop and die, a speedtest (speedtest.net app) will start and then just time out... and then report 0.
-James

Make sure you download the universal update -- There are two builds, if I recall properly -- FRF85 and FRF85B -- FRF85B is for TMO and straight FRF85 is for ATT
http://android.clients.google.com/packages/passion/signed-passion-ota-42745.dc39ca1f.zip

Which stock recovery did you use?

tokyomonster said:
Make sure you download the universal update -- There are two builds, if I recall properly -- FRF85 and FRF85B -- FRF85B is for TMO and straight FRF85 is for ATT
http://android.clients.google.com/packages/passion/signed-passion-ota-42745.dc39ca1f.zip
Click to expand...
Click to collapse
Thanks so much! I'll try this.

tokyomonster said:
Make sure you download the universal update -- There are two builds, if I recall properly -- FRF85 and FRF85B -- FRF85B is for TMO and straight FRF85 is for ATT
http://android.clients.google.com/packages/passion/signed-passion-ota-42745.dc39ca1f.zip
Click to expand...
Click to collapse
Nope, that's wrong. FRF85B is for all Nexus one phones.
OP, why don't you try dialing *#*#4636#*#* in the dialer and checking to make sure your phone settings are "WCDMA preferred"?

J.L.C. said:
Which stock recovery did you use?
Click to expand...
Click to collapse
The recovery.img that comes with EPE54B

Clarkster said:
Nope, that's wrong. FRF85B is for all Nexus one phones.
OP, why don't you try dialing *#*#4636#*#* in the dialer and checking to make sure your phone settings are "WCDMA preferred"?
Click to expand...
Click to collapse
Have full 3G signal strength, never had to do that on AT&T. Had a T-Mobile N1 once, needs to do it then

tokyomonster said:
Make sure you download the universal update -- There are two builds, if I recall properly -- FRF85 and FRF85B -- FRF85B is for TMO and straight FRF85 is for ATT
http://android.clients.google.com/packages/passion/signed-passion-ota-42745.dc39ca1f.zip
Click to expand...
Click to collapse
Well this didn't improve anything. Maybe there is some network issue here. Thing that worried me is that I asked an AT&T friend to check their data and theirs worked.
Damn.
Well I'll have to try at home and see if I'm not just experiencing some localized data issue.
On a side not, that so called universal update you linked me, well it says FRF85B in my phone info so I don't see what the difference is.

I think my phone is busted. No change or improvement based on location. Data is just DAO. Says it's connected, has full signal, but mostly just times out, or doesn't do anything at all.

jmacdonald801 said:
I think my phone is busted. No change or improvement based on location. Data is just DAO. Says it's connected, has full signal, but mostly just times out, or doesn't do anything at all.
Click to expand...
Click to collapse
Try what clarkster said, a few people had this problem.
OP, why don't you try dialing *#*#4636#*#* in the dialer and checking to make sure your phone settings are "WCDMA preferred"?

P00r said:
Try what clarkster said, a few people had this problem.
OP, why don't you try dialing *#*#4636#*#* in the dialer and checking to make sure your phone settings are "WCDMA preferred"?
Click to expand...
Click to collapse
I did this, it was set to wideband preferred.
For a luagh, I tried putting the EPE54B radio on it (left FRF85B on it), and it's still messed up.
It will cut in an out during a speedtest (still with full bars) and most of the time just time out and puke.
Browser is also highly intermittent. Usually data stops flowing before I can get more than web page to load.
Any more ideas?
Changing the radio didn't help.
Using default APN settings...

Do you have any lock screen apps installed?

jmacdonald801 said:
I did this, it was set to wideband preferred.
For a luagh, I tried putting the EPE54B radio on it (left FRF85B on it), and it's still messed up.
It will cut in an out during a speedtest (still with full bars) and most of the time just time out and puke.
Browser is also highly intermittent. Usually data stops flowing before I can get more than web page to load.
Any more ideas?
Changing the radio didn't help.
Using default APN settings...
Click to expand...
Click to collapse
Do you use SwitchPro Widget?

I was on FRF72, and went to FRF85B, I thought everything was ok till I went out earlier today, I got NO data at all, no edge or 3g, icons wouldn't show up.
Tried 2G only, didn't work, also checked that WCDMA PREFERRED was selected. Nothing.
Did a nandroid back to FRF72 and all was fine.
So I nandroid back again to FRF85B, WIPED, and redid my phone, and 3G works great.

THATTON said:
Do you use SwitchPro Widget?
Click to expand...
Click to collapse
+1
SwitchPro had me thinking my phone was dead yesterday after an update killed everyone's 3g.

This is issue is on a stock FRF85B. No apps other than default, and my restored bookmarks.

Same problem. 100% stock no root or unlock. 3G icon shows up and down activity but pages wont always load and browser and apps that use internet constantly lag. On WiFi the issue isn't there.
Sent from my Nexus One using XDA App

i have been having same problem my radio is 4.06.00.12_7 (if needed) cant seem to get any download speed when useing 3g. edge works just fine. could use some help cause i rely on data.

My problem seems better today, but I am still experiencing severe intermittent data.
Full signal, 3G... it's almost like the data connection just goes to sleep and won't wake up again.
If you refresh the web page a few times, after a few minutes it finally comes back, but then all of a sudden, about 30 second to a minute into loading a page, it just stops...
The problem is in Maps and Market to... it starts to load... stops... or sometimes won't start at all, like maps won't start loading tiles.
Very frustrating.
-James

My 3 week old stock unrooted N1 seems to have lost 3G as well after the Froyo FRF85B update last night.
No signal problem as I live right next to a tower which provides me with a very strong signal and 3G always worked solid with Eclair. Pulled out the sim and placed it in my Nokia E71 a couple of times today to check the network and I have plenty of 3G data speed so I don't think it's an ATT issue.
If I click on 'use 2G only' in the settings, Edge seems to be working fine. Just no 3G. I could see from the data "stats" app that a few kb/s must have transferred through 3G in the past 24 hours but I'm not sure as it's useless for anything else that requires data.
I've spent the last 8 hours messing with my phone and googling a fix to no avail. I found this thread to see that someone else has this unfortunate problem as well, sigh. I hope there's a fix out there somewhere.
To say I'm been gutted is an understatement
-Chris

Vogue users... I need help with testing.

I need a Vogue user who wants to install VaniljEclair RLS9 and then add the update attached in this post: http://forum.xda-developers.com/showpost.php?p=7511486&postcount=612
I want to now a few things before I push the changes in libhtcgeneric-ril.so to the repo.
1. Does the cell tower location changes break anything for Vogue users (I'm pretty sure cell tower location won't work on Vogues but as long as the changes doesn't break Vogue compability then the change would be OK to push)
To test this, just make sure phone calls and data traffic works.
2. Does the pin code changes work on Vogue, at least I'm pretty sure they shouldn't break anything but it would be nice to know if it works on Vogues aswell.
To test this, enable pincode security in Windows mobile (or use another phone to do it) and see if accepts your pincode in android.
If you want to try changing the pincode you propably should use a spare SIM card. It worked fine for me on my Kaiser but I guess there is a risk involved.

I could try and test this, but 1 main question:
I use Sprint network - so my vogue's do NOT have a SIM card?
Would loading this provide any useful testing?
Or does the testing require a phone with SIM card?

Does_It_Matter said:
I could try and test this, but 1 main question:
I use Sprint network - so my vogue's do NOT have a SIM card?
Would loading this provide any useful testing?
Or does the testing require a phone with SIM card?
Click to expand...
Click to collapse
Testing would still be helpful, just to now it still works just as it did before the update.

OK, will try it out after I backup some of my stuff on the phone.
1 More question:
I'm currently running Incubus Release 12 Froyo with the 7/26/10 NBH file
Can I just go ahead and install Eclair?
Or do I actually need to flash an eclair NBH?

kallt_kaffe,
I'm running Froyo RLS 12 from Incubus
I saw your androidupdate.tar file only had this 1 file changed: libhtcgeneric-ril.so
I said what the hell, and just went and applied the update to Froyo RLS 12
Rebooted the phone - no issues, can still make phone calls and can still do data/internet
Is that a good enough test?
Or does Eclair specifically have to be installed on the phone?

Does_It_Matter said:
kallt_kaffe,
I'm running Froyo RLS 12 from Incubus
I saw your androidupdate.tar file only had this 1 file changed: libhtcgeneric-ril.so
I said what the hell, and just went and applied the update to Froyo RLS 12
Rebooted the phone - no issues, can still make phone calls and can still do data/internet
Is that a good enough test?
Or does Eclair specifically have to be installed on the phone?
Click to expand...
Click to collapse
Interesting... I didn't think Froyo would run with a libhtcgeneric-ril.so compiled for Eclair. I've tried the other way around and it left me without any data or phone connetion.
As for your previous question. You can use the froyo kernel on VaniljEclair RLS9. And if it isn't to much trouble, then please test it with eclair too even thought the Froyo test propably proves it works on Vogues.

hey K_K i can test it my vogue isnt active though, if you still need people to test it only problem is i wouldnt be able to do it till later tonight

thoughtlesskyle said:
hey K_K i can test it my vogue isnt active though, if you still need people to test it only problem is i wouldnt be able to do it till later tonight
Click to expand...
Click to collapse
That's OK. Let me know how it goes.

I've been running your Vanilla Eclair full time since release 8, IMHO it is the fastest and most reliable 2.1/2.2 build out there. I will load the update and let you know if I see any issues.
Mike

Well I can confirm that the cell tower location does NOT work for me (Vogue on Verizon CDMA), which I believe was expected. I noticed no other issues with phone/data service though.
Mike

kallt_kaffe said:
Interesting... I didn't think Froyo would run with a libhtcgeneric-ril.so compiled for Eclair. I've tried the other way around and it left me without any data or phone connetion.
As for your previous question. You can use the froyo kernel on VaniljEclair RLS9. And if it isn't to much trouble, then please test it with eclair too even thought the Froyo test propably proves it works on Vogues.
Click to expand...
Click to collapse
Yep - HTC Touch Vogue - Sprint Service
Works without any problems using your fixed file
Data works, calls work, and hell, it even works on Froyo RLS 12 as an update!
Nice one.

golfnz34me said:
Well I can confirm that the cell tower location does NOT work for me (Vogue on Verizon CDMA), which I believe was expected. I noticed no other issues with phone/data service though.
Mike
Click to expand...
Click to collapse
I believe he's just trying to see if the changes he made affect Vogue users at all. The changes were for cell tower location on GSM networks, and since Vogues use CDMA it won't work. He just wants to make sure that CDMA doesn't break. You shouldn't expect to see anything new, just that everything is working as it used to, and it's a good sign that it is.

Thanks everyone who has tested. I'll consider the test to be over and I'll push the new code today.

Looking for some help...

..In picking out which is the best droid setup for me.
I was here months back when I setup droid on my Vogue(US Cellular) and over the course of a couple days of trying out different builds and testing, I found that Warm Doughnut was the best working one for me at the time. Unlike the Froyo build on here that I tried, doughnut's data connection worked fine (and right away) without any setup at all whereas I couldn't get it running for the life of me on Froyo.
However, I'm wanting to swap out past doughnut now to a more updated version of Android. Which would you all recommend? I've been reading some good reviews on the Gingerbread build... However, I'm worried about calls/sms/data and all of the other features... Which are working which aren't?
I'd have to have them all working (like current setup on doughnut) to make the switch, else it'll just be pointless for me.
Now I ask the same of the FroYo build on here. Before it worked fine for me, except the data functions... I couldn't get it to connect at all for the life of me.
So, I ask of you all with more experience with this phone than me. What would you suggest? What works for you? Doughnut, Froyo, or Gingerbread?
I want to get Froyo running if I can (about to put it back on and give it a go) but not having a data connection will kill the idea for me. And even better would be if I can get Gingerbread running, but only if I can get in/outgoing calls, sms, data, (gps hopefully) and bluetooth.
Thanks in advance for any/all support you guys can give me!

Superfroyo seems very stable and functional to me. I'm on Sprint. Even MMS works though you have to fiddle with it. Gingerbread's not all there yet stabilitywise.

goducks3620 said:
Superfroyo seems very stable and functional to me. I'm on Sprint. Even MMS works though you have to fiddle with it. Gingerbread's not all there yet stabilitywise.
Click to expand...
Click to collapse
Thanks for the reply! I felt the same when I tried it out months ago, my only issue is getting the data running... Did you have to fiddle with yours a lot to get it working? I know you're on Sprint and I'm on US Cellular, but from what I can tell the two shouldn't be that different to setup. Maybe I didn't give it enough time/work before to get data running (or maybe I was doing it wrong).
Also, I'm going to be using it from my SD card (like I have previously) for a while and make sure its solid before I think about wiping my WM6.1 off and replacing it altogether. Doughnut worked fine off of the SD card, I'm assuming Froyo will as well? Didn't give it too much time before, but when I did have it going on the SD card before I didn't notice it chugging along at all.

Another thing, do I have to use WM6.5 to get this going, or is it ok using WM6.1 like I am? Would prefer not to have to redo (and backup all that nonsense) for my 6.1 if I don't have to.

I totally wiped windows mobile and run off nand. It's snappy enough and data worked straight off. No fiddling.
Sent from my Full Android on Vogue using XDA App

Well, got Froyo running... But no data running yet... Enabled Data, enabled data while roaming (roaming majority of the time anyways) and nothing yet...
Ideas anyone?

M 5hizzle said:
Well, got Froyo running... But no data running yet... Enabled Data, enabled data while roaming (roaming majority of the time anyways) and nothing yet...
Ideas anyone?
Click to expand...
Click to collapse
The typical question is: does it work in winmo?

CM 11 Albinoman nightlies 21/01/2014 MMS not working

Hello.
I recently dusted off my Australian Velocity after the Nexus 5 went for a swim at the beach. I have S-off, rooted and installed the albinoman ROM.
There are a couple of issues I have noticed so far.
The 4g connection is patchy at best. Not very stable at all but I can live with that.
The battery indicator is acting strangely it stays in 100% for ages but then it starts going down very quickly until it gets to 14% where it stays for a long time but once it gets past that it just goes to full discharge very fast.
I am having the same issue that many other guys and my MMS capabilities are not working. The phone just stays sending or retrying but messages never leave.
Any suggestions about what to do? I have wiped and reinstalled the ROM a few times and it makes no difference.
On the other hand I love the overclocking capabilities makes the phone feel a bit more responsive.
Thanks and keep up the good work

munecito said:
Hello.
I recently dusted off my Australian Velocity after the Nexus 5 went for a swim at the beach. I have S-off, rooted and installed the albinoman ROM.
There are a couple of issues I have noticed so far.
The 4g connection is patchy at best. Not very stable at all but I can live with that.
The battery indicator is acting strangely it stays in 100% for ages but then it starts going down very quickly until it gets to 14% where it stays for a long time but once it gets past that it just goes to full discharge very fast.
I am having the same issue that many other guys and my MMS capabilities are not working. The phone just stays sending or retrying but messages never leave.
Any suggestions about what to do? I have wiped and reinstalled the ROM a few times and it makes no difference.
On the other hand I love the overclocking capabilities makes the phone feel a bit more responsive.
Thanks and keep up the good work
Click to expand...
Click to collapse
As for the 4G connection, once you've accumulated 10 posts you should mention this in the CM 11 ROM thread and ask if the APN needs to be any different than normal (or if the mod changes the APN). The battery issue should get fixed if you let it fully charge and fully discharge about 3 times. The MMS capabilities is a known issue; try the specific nightlies that albinoman recommended to fix the MMS issue. New nightlies might break previous fixes and stuff.

Same Issue
I'm having the same issue here for AT&T HTC Vivid, none of my MMS were sent, nor have I received any. It's really essential for me cuz of my group, clubs have MMS and inorder for me to get those notifications I need MMS.
Calls are okay, but there are times where there's no sound on the other caller, so to fix that I end call and call again, which fixes it.
One final issue I've been having since Jellybean and Kitkat is the proximity for when calls, it does not respond. So i have to turn on Settings>Accessibility>Power button to end a call, because the phone's screen stays black during call, and 10-30 seconds after call. Camera is okay too, but doesn;t function well in video recording in apps like Snapchat and Instagram.
Overall, it's a great ROM by albinoman, I wish the Sweep2Wake is soon embedded, that's really great and wayyy better than the power button.

projectisaac said:
As for the 4G connection, once you've accumulated 10 posts you should mention this in the CM 11 ROM thread and ask if the APN needs to be any different than normal (or if the mod changes the APN). The battery issue should get fixed if you let it fully charge and fully discharge about 3 times. The MMS capabilities is a known issue; try the specific nightlies that albinoman recommended to fix the MMS issue. New nightlies might break previous fixes and stuff.
Click to expand...
Click to collapse
Thank you very much.
I tried Albinoman suggested rom and I still have issues with MMS.
The battery indicator is normalising as you said it would.
I know about the 10 posts count but it is hard for me to just write a post for the sake of getting the count up.

Yeah, I hear ya, I've been there before too. The posts will generally come easily and quickly posting to q&a and general, so you're on the right track
Sent from my Vivid 4G using xda app-developers app

Similar question
I'm also in Aus.
Been running CM versions now for over a year.
The new CM11 has been trouble free, with one quirky problem. I manually set my network preference to 2G at one desperate battery extending moment.
Now i can't find how to select "4G"??? When i use the preferred network type i only have 2 or 3G as options.
When i search for available networks i get an "error"
Cheers
Mike

Mikeyr1000 said:
I'm also in Aus.
Been running CM versions now for over a year.
The new CM11 has been trouble free, with one quirky problem. I manually set my network preference to 2G at one desperate battery extending moment.
Now i can't find how to select "4G"??? When i use the preferred network type i only have 2 or 3G as options.
When i search for available networks i get an "error"
Cheers
Mike
Click to expand...
Click to collapse
Well, I just did what you did, and rebooting does not fix it, nor does clearing the data of various apps installed. I'll post this to the CM11 thread and see if any answers or ideas are brought to light.

ngelTV should
projectisaac said:
Well, I just did what you did, and rebooting does not fix it, nor does clearing the data of various apps installed. I'll post this to the CM11 thread and see if any answers or ideas are brought to light.
Click to expand...
Click to collapse
Many thanks, i saw the post!
Yeah I tried clearing everything. Did a manual reinstall of the APNs using a number of different configs.
Did the wipes ....... did a little dance .... pulled the battery and sim ...... sacrificed a small packet of tofu (no goats, i like goats) The gods of mobility have still not smiled my way.
Wont find networks when i do a search yet am nicely connected, can make calls etc etc.
thanks for trying. If i get no joy will reflash a nightlie and see if it resets?!

Yeah, although wiping the caches didn't do the trick, reflashing a nightly (along with wiping data, cache, and dalvik-cache) should take care of the problem. If you are really attached to your app settings, look into titanium backup for backing up your apps along with their data; it's also the way I save my WiFi passwords.
Sent from my Vivid 4G using xda app-developers app

OK...
If you don't like my dialer solution... I have found 2 xposed mods that do what you want...
Intelli3G... And GravityBox...
They both hook the dialer to force network changes...
Sent from my Vivid 4G using Tapatalk

rignfool said:
OK...
If you don't like my dialer solution... I have found 2 xposed mods that do what you want...
Intelli3G... And GravityBox...
They both hook the dialer to force network changes...
Sent from my Vivid 4G using Tapatalk
Click to expand...
Click to collapse
Hi, tried the dialer solution and no joy.
Installed INtelli3G but it needs the xposed framework which simply won't install. Have tweaked instal options appropriately so it should???
Mike
EDIT My bad, didn't like installing from bluetooth transfer, downloaded on phone worked .... will test I3G

Fixed
Many thanks rignfool
I installed xposed and Intelli3g and with a bit of mucking around now have 4g back!
Seems to work, have 4g 4 bars!
My initial attempts to force lte caused me to have no coverage (I was at work in North SYd so good LTE normally).
Using the "use all" option in Intelli3g, a reboot and swapping around towers was the trick for me.
Thanks again
Mike

Awesome! Do you want to make a step by step instruction set on how to fix that? I would like to know, and I'm sure a newbie who runs into the save problem would really appreciate it.
Sent from my Vivid 4G using xda app-developers app

Im on the newest nightly build of CM11, On ATT. MMS not working and I have no clue on how to get it to work. Anyone wanna help?

VividTheMan said:
Im on the newest nightly build of CM11, On ATT. MMS not working and I have no clue on how to get it to work. Anyone wanna help?
Click to expand...
Click to collapse
Known issue, you just have to be patient until it gets fixed (no one has gotten it to work)