Related
Hi , i got sensedroid v9 and i must say it is amazing!
Didn't knew my 'old' xperia could handle this full function android!
Only the camera isn't working, but i read that is by all of the android versions for xperia (exept NAND)
If i could post in the sensedroid thread, i would thank the maker alot !
But i have a question: i read that if you install a kernel, your Xperia becomes way faster, and yeah i would like that. But what is the best kernel to use with sensedroid? And what does this exactly do?
Again alot of thanx to the creator of sensedroid and hope you guys can give me some information
i think best kernel is midnights kernel. As far as I know it is allready included in the latest Sensedroid version. When not you find it in android section.
I would be very happy to hear that..
My V9 was using ygge's Turbo kernel, if you want to use Midnight's kernel you can download his V10 kernel HERE, and remember to change your startup command.
jerrytan93 said:
I would be very happy to hear that..
My V9 was using ygge's Turbo kernel, if you want to use Midnight's kernel you can download his V10 kernel HERE, and remember to change your startup command.
Click to expand...
Click to collapse
Hi, you are the creator of sensedroid right?
Thanx alot for it!
Is ygge's Turbo kernel faster then Midnight or not?
I never use my mobile phone more then like 9hours per day, so i dont care about the battery being empty earlier.
Also i have this question: If i make the android partitions on my SD bigger, will it be faster? like: if i make my cache partition like 1GB will it be faster then? or doesn't that matter at all?
Thanx for the replies, Jurre
JurrePs3 said:
Hi, you are the creator of sensedroid right?
Thanx alot for it!
Is ygge's Turbo kernel faster then Midnight or not?
I never use my mobile phone more then like 9hours per day, so i dont care about the battery being empty earlier.
Also i have this question: If i make the android partitions on my SD bigger, will it be faster? like: if i make my cache partition like 1GB will it be faster then? or doesn't that matter at all?
Thanx for the replies, Jurre
Click to expand...
Click to collapse
both kernel have same overall performance, for more kernel information go HERE to get the informations.
You may make your DATA partitions bigger because it will be your internal storage in Android, other than that it's not necessary to make other partitions bigger.
jerrytan93 said:
both kernel have same overall performance, for more kernel information go HERE to get the informations.
You may make your DATA partitions bigger because it will be your internal storage in Android, other than that it's not necessary to make other partitions bigger.
Click to expand...
Click to collapse
Ok but when i check the differences between midnight and turbo, i see that midnight charges better. And has better call function.
So i wanna try it out, but i dont get wich values i have to put in STARTUP.txt
Can you please post them? Also if i boot their haret.exe with values from sensedroids STARTUP.txt it rotates the screen 180 degrees. So i see the letters upside down , when i turn device i can read something like rootfs not found end it wont boot android how do i fix this?
Jurre (sorry for the questions)
JurrePs3 said:
Ok but when i check the differences between midnight and turbo, i see that midnight charges better. And has better call function.
So i wanna try it out, but i dont get wich values i have to put in STARTUP.txt
Can you please post them? Also if i boot their haret.exe with values from sensedroids STARTUP.txt it rotates the screen 180 degrees. So i see the letters upside down , when i turn device i can read something like rootfs not found end it wont boot android how do i fix this?
Jurre (sorry for the questions)
Click to expand...
Click to collapse
There you go.. download the attached file HERE, extract it and then replace them with the old files in your npkboot folder.
jerrytan93 said:
There you go.. download the attached file HERE, extract it and then replace them with the old files in your npkboot folder.
Click to expand...
Click to collapse
Thanks again! what a service!
Works like a charm, if i want the V10 i do only need to replace the 2 files wich i get in the V10 download from midnights topic? I will try it later, im already really happy with this ;D
Jurre Clicked the thanx button again
JurrePs3 said:
Thanks again! what a service!
Works like a charm, if i want the V10 i do only need to replace the 2 files wich i get in the V10 download from midnights topic? I will try it later, im already really happy with this ;D
Jurre Clicked the thanx button again
Click to expand...
Click to collapse
You are welcome..
Yes you only need to replace modules and zImage, no need to change startup anymore..
jerrytan93 said:
You are welcome..
Yes you only need to replace modules and zImage, no need to change startup anymore..
Click to expand...
Click to collapse
Oke thanks alot!!
Just 1. Last question : you said it is not necesarry to make the other partitions bigger, but do you mean it will work but is not actually needed or do you mean it is not working?
Jurre
JurrePs3 said:
Oke thanks alot!!
Just 1. Last question : you said it is not necesarry to make the other partitions bigger, but do you mean it will work but is not actually needed or do you mean it is not working?
Jurre
Click to expand...
Click to collapse
Not needed and waste of your SD card memory.. so can considered as not working..
jerrytan93 said:
Not needed and waste of your SD card memory.. so can considered as not working..
Click to expand...
Click to collapse
Haha oke,
Unless i still cant post in android development forum, i wanna say i can't wait for sensedroid v10!!!!
Jurre
As the title, is the v6supercharger or slaidyboost better?
a121232 said:
As the title, is the v6supercharger or slaidyboost better?
Click to expand...
Click to collapse
You can't compare both man. They are completely different scripts...
V6 - is a memory management script. It fixes LMK and OOM values so that apps don't run in background. Soon ultimately this may increase the overall battery.
Slaid - its a better script as it has many different features like smoothness, lag fix, battery tweaks, fast boot, etc. So if u want overall increase in performance... Go for this.
Adrenaline shot - similar to slaid but with some changes in code. Its here in dev section if not, go to Ace dev section and ask the Guy who wrote this to make changes for our mini.
Hope it helped you
freakyfriday said:
You can't compare both man. They are completely different scripts...
V6 - is a memory management script. It fixes LMK and OOM values so that apps don't run in background. Soon ultimately this may increase the overall battery.
Slaps - its a better script as it has many different features like smoothness, lag fix, battery tweaks, fast boot, etc. So if u want overall increase in performance... Go for this.
Adrenaline shot - similar to slaid but with some changes in code. Its here in dev section if not, go to Ace dev section and ask the Guy who wrote this to make changes for our mini.
Hope it helped you
Click to expand...
Click to collapse
Can you tell me the easiest way to use v6supercharger?
a121232 said:
Can you tell me the easiest way to use v6supercharger?
Click to expand...
Click to collapse
Download and install script manager
Download V6 script from xda
Put it SD card
Open script manager app and find v6 script
Open it
Then a screen will pop up showing various options
Choose root option (icon with su icon) , save it
Hit execute
V6 will start running.
Choose option 7 ( 512 HP - aggressive. )
Super clean and restart.
That's. It ( it will take a long time to boot don't worry u dint brick ur phone
Optional ---
SM Widgets
KickAss kernel
NitroLag boot
3G Turbo boost
Enjoy and hit thanks coz I m really lazy still I wrote this down for someone, I dont even know lol
Thanks @freakyfriday
Nice post, I never install v6 till now but because of u I try it now
JoK€R said:
Thanks @freakyfriday
Nice post, I never install v6 till now but because of u I try it now
Click to expand...
Click to collapse
Good to be of help... do give it a try coz its a very good script..
what is slaps?
Sent from my GT-S5570
droidface said:
what is slaps?
Sent from my GT-S5570
Click to expand...
Click to collapse
Lolll sorry buddy it was a mistake...I use t9 to type so I forgot to correct slaid, which was misspelled as slap..
When I open script manager, I got disconnect from it. Why?
Can you tell me how to install the optional packs by using terminal emulator?
Did u install the busybox yet? Try install it and choose ver 1.18.xx and try again, i have no problem when i use it
a121232 said:
When I open script manager, I got disconnect from it. Why?
Can you tell me how to install the optional packs by using terminal emulator?
Click to expand...
Click to collapse
Usd BusyBox Installer..it recquires root...there are many versions so choose the one with 600kb size not 5mb app as far as I remember..
I use busybox 1.18.2 @@
has anyone tried to use slaidy boost with CM 7.2 RC 5.7?
should i delete previous default script before flashing it?
**** ONLY FOR GT I9100G***
----------------------------------------------------------------------------
No launcher Redraws...No app drawer lags...Only Pure Performance
--------------------------------------------------------------------------------
This is a tutorial to supercharge your android running cm9 with a help of a script known as the V6 Supercharger
Note:
I am not responsible for bricking your phone(if you bricked it means...you are pretty bad at reading)
Neither codeworkx nor zeppelinrox are responsible!!
U r responsible for ur own actions!!!!
Before doing any of these actions...pls read the threads mentioned carefully and try to understand it!!!!
This is an advanced process...bt i wil try and make it simple for you!!
Always remember to take a nandroid backup before flashing anyting or doing advanced process!!! As it may save your phone!!!!!
Read these threads very carefully:
1.http://forum.xda-developers.com/showthread.php?t=1583091
2.http://forum.xda-developers.com/showthread.php?t=991276
First all credit goes to
Codeworkx for creating the mighty cm9
Zeppelinrox for creating the awesome V6 super charger script
**Note**
1.This tutorial is only for Samsung galaxy S2 GT i9100G users
2.You should have installed Cyanogen mod 9(ver 20120604) by codeworkx (For instruction check the XDA forum or the given link below)
http://forum.xda-developers.com/showthread.php?t=1583091
3.If you were unable to install cm9..tn you cant use the supercharger script as it is only for Deodexed roms!!! Sorry!!
(But if you hav rooted stock ics 4.0.3 you can supercharge upto 50%!!)
4.Go to:
http://forum.xda-developers.com/showthread.php?t=991276
Read the complete thread and understand what you are doing!!!
5.First Download these things...
a. Script Manager from Google play!!(its free but if u want an ad free ver pay for it)
(Download this app as it can even run scripts at boot time)
b.Download Supercharger script from
Directly from:
http://forum.xda-developers.com/attachment.php?attachmentid=993904&d=1334036191
(or)
Download links are in the last of the post
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Make sure its file name is:
V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf
As the latest wont work!!!
c.Since you are already in cm9(the latest build i.e 20120603/04) your phone is pre rooted and pre busybox inatalled.
so you dont have to worry abt these things.
Note: Dont install or update the stock busybox on cm9!!
d. Root explorer from google play
Its not free but its very userfriendly!!....(You can use any root explorer app with mounting abilities)
Now you are ready to go!!!!!!!
First Stage:
1.Open the script manager...locate the downloaded V6Supercharger script and open it.
2.Open it as script mode and run it as root mode(Dont run this as Boot mode)
(Only the pirate head must be green)
3.Run it by pressing the run option in the beg!!
4.It starts displaying the v6 animation.
5.Now carefully read each and every line....what it says!!!
6.Choose the options as suitable for you (For beginners and noobs set the scroll speed to slow!!)
7.Since you are running deodexed rom...follow the instructions there and you will end up with Supercharged only 50%)
8.If it asks to reboot and clear your cache memory...do it...if not close the application!! and reboot it!!!
9.Now you have 50% Supercharged....To supercharge 100% you need to follow the below steps!!
Second Stage:
10.Boot up your phone and go to
http://android.mimic.ca/
There upload your services.jar file
It is located in: Root--> System--> Framework--> Services.jar
After uploading....Enter the details of ur mobile and your android os...
It will give you two options!!
--------------------------------------------------------------------------------------
1. One is to download a cwm.zip file and flash it over cm9 in recovery mode
(It did not work for me!!!...i had to reinstall cm9 fresh!! Try your luck!!)
2.Download the changed Services.jar
(Actually it is simple ...but it needs some extra steps!! bt don worry...not that difficult)
----------------------------------------------------------------------------------------
11.Replace the original services.jar file with the old one( Mount to read/write mode before replacing)
(Before replacing.... copy the original services.jar to some folder)
12.Now Go to the terminal(Default app in CM9) and type the following
(if the terminal app closes... reboot the phone and try again)
(Press enter after typing each line)
(After the first command su....allow root access for terminal app)
(Do some copy paste activity...if u r bad at using terminal )
su enter
cd /system/framework enter
chown 0.0 services.jar enter
chmod 644 services.jar enter
13.Now you are done with the terminal hence close it.
14.Open Script Manager again and run the script V6Supercharger in root mode only!!
15.Follow the onscreen instructions and in the end you will get display as:
100% Supercharged!!!
Please donate the developers on this site and thank me for sharing the info....
Congrats Now your phone is Supercharged!!!!!
Enjoy the new Performance!!!
If you got any bugs, or did not understand any of the above steps...pls ask me...no probs...we are here for noobs!!..we will help!!
Note:
If you could not follow my instructions...i can give you screenshots.....But try and understand...you aint tht noob ryt??
There are several scripts developed by zippelinrox
1.Die hard Batterycharger
2.3g Turbocharger
3.Kick ass Kernalizer
4.99supercharger
If you want any guidance for the above scripts ping me....
!!!Thank me if i was of any help!!!
Edit 5-6-12
Guys if you are experiencing force clousure of google apps.. Pls rerun d script and in d driver options run fix emissions...
(or)
Go to the created v6 folder and run fix emissions script in root + boot mode!!! ..
Run 99supercharger script in boot+ root mode!!!!
Edit: 5-6-12
How to run scripts in the easiest way!!...Simple make it as widgets!! I knw...easy ryt??
Actually some of u guys asked for a tutorial ....actually there is really not soo much to teach in this...
But...Read on
Note:
Even though you make a widget...you have to upload the service.jar and tn download...n tn terminal commands and ol...(Cz services.jar wil be rewritten each time you apply an update)So it only helps when you are fixed to the rom...i.e When there is a Stable release!!...I just couldn wait to test these scripts ...so i shared with you!!
1.Go to
https://play.google.com/store/apps/...=W251bGwsMSwxLDEsIm9zLnRvb2xzLnNtd2lkZ2V0cyJd
Install the Script manager widgets
2.Now go to the app drawer and tn to the widgets menu....there search for SMWidgets...place it on to the desktop
3.Add one script widget---->...u find a lot of scripts there and select the V6 script....
4.The widget is created...so now you can run the V6 right from the widget....
5.There are many scripts options and you can try em out!!!...but beware of the mods...these are dangerous as they are system mods!!!
And for guys not experiencing the Supercharger.....
To experience it completely...
You gotta install V6 ...Supercharge to 100%...tn install 3G turbocharger.....Make Fix emission to run at boot...Make 99supercharger to run at boot...tn instal KickAssKernalizer...tn run Powershifts as widgets according to your wish...run 1 shot bullet-proof launchers...and enable timings for engine flushings (auomatic)
So if you do all the above process tn u can experience the performance...Nw its difficult and time consuming process to do alll the things i said....Because there will be nightly releases cm9 almost everyday ....and these settings will get deleted when you flash a cm9 update...so wait for a stable release ...i have just talked about the supercharger because its the main and covers abt 50%...So i jus wanted you guys to experience some better performance!!
Note:
Installing these settings scores you less in Anututu Benchmark. But as Codeworkx said....benchmarks are for kids...You are not here to race against points shown by an app....These things make your CM9 integrate with the system better....Therefore these scripts are there to comfort you!!! The real magic is CM9 and remember these scripts are just addons!!
----------------------------------------------------------------------------
No launcher Redraws...No app drawer lags...Only Pure Performance
-----------------------------------------------------------------------------
Did this... I'm 100% super-charged.
But now whenever i boot my phone, processes.googleapps force closes.
I tried Fixing emissions also ... Didn't help.
Googled the problem ... but no solution.
Kisapp, so far do you have any problems by using V6 Super Charge?
yashrathi2008 said:
Did this... I'm 100% super-charged.
But now whenever i boot my phone, processes.googleapps force closes.
I tried Fixing emissions also ... Didn't help.
Googled the problem ... but no solution.
Click to expand...
Click to collapse
Try to clear dalvik cache....if tht dosen work ...do this...Flash gapps again... N fix permissions...
Sent from my GT-I9100G using xda premium
Cyanogenmod 9 - ver20120604
Stock CM9 kernel
V6 supercharged
walauu said:
Kisapp, so far do you have any problems by using V6 Super Charge?
Click to expand...
Click to collapse
Nope... Nt even a single 1....;-) ..i have installed many other scripts....Are you facing some problems???
Sent from my GT-I9100G using xda premium
Cyanogenmod 9 - ver20120604
Stock CM9 kernel
V6 supercharged
Thanks a lot man
Sent from my GT-I9100G using XDA
CM9 updates and v6 SC
Hey, sorry this is probably a pretty n00b question, but I'm a n00b so what else can be expected?
Does flashing the new updates of CM9 effect this script at all? Basically do I have to re-run v6 supercharger every time I update to the newest CM9 nightly or is this script not at all effected by the updates?
Thanks in advance.
When I type cd/system/framework then enter
it shows sh: ch/system/framwork: not found
The following line also the same. What is the problem?
walauu said:
When I type cd/system/framework then enter
it shows sh: ch/system/framwork: not found
The following line also the same. What is the problem?
Click to expand...
Click to collapse
Put a space after the cd. So it should be "cd /system/framework" not "cd/system/framework"
If you type it exactly like it is above it should work.
301stSpartan said:
Hey, sorry this is probably a pretty n00b question, but I'm a n00b so what else can be expected?
Does flashing the new updates of CM9 effect this script at all? Basically do I have to re-run v6 supercharger every time I update to the newest CM9 nightly or is this script not at all effected by the updates?
Thanks in advance.
Click to expand...
Click to collapse
i also wish to know the answers.
could some body help us out?
thanks
Kingspp said:
Try to clear dalvik cache....if tht dosen work ...do this...Flash gapps again... N fix permissions...
Sent from my GT-I9100G using xda premium
Cyanogenmod 9 - ver20120604
Stock CM9 kernel
V6 supercharged
Click to expand...
Click to collapse
^Didn't work. Please give me a solution... Its very annoying
hi..
im very sure i followed every steps mentioned above but get 50% supercharged only.. i dont know why.. any help?
EDITED: solved sorry thanks for this btw..
wan903 said:
hi..
im very sure i followed every steps mentioned above but get 50% supercharged only.. i dont know why.. any help?
EDITED: solved sorry thanks for this btw..
Click to expand...
Click to collapse
how does it feel to be 100% supercharged?
is it crazy fast?
how is the battery discharge?
wan903 said:
hi..
im very sure i followed every steps mentioned above but get 50% supercharged only.. i dont know why.. any help?
EDITED: solved sorry thanks for this btw..
Click to expand...
Click to collapse
Did you face the google apps forced close thing? I have this problem. I copy and paste the downloaded service.jag to the system/framework folder. After that, when I open terminal, type su => enter then it auto restart my phone. I restored my phone, try second time. The same thing. Everytime also su=> enter then auto restart. After restart then shows forced close to my google. Anybody know what is the problem?
Any other successful user to post their experience after supercharged?
301stSpartan said:
Hey, sorry this is probably a pretty n00b question, but I'm a n00b so what else can be expected?
Does flashing the new updates of CM9 effect this script at all? Basically do I have to re-run v6 supercharger every time I update to the newest CM9 nightly or is this script not at all effected by the updates?
Thanks in advance.
Click to expand...
Click to collapse
U have to rerun every script for each update
Sent from my GT-I9100G using Tapatalk 2
301stSpartan said:
Hey, sorry this is probably a pretty n00b question, but I'm a n00b so what else can be expected?
Does flashing the new updates of CM9 effect this script at all? Basically do I have to re-run v6 supercharger every time I update to the newest CM9 nightly or is this script not at all effected by the updates?
Thanks in advance.
Click to expand...
Click to collapse
Yup... Cause every time u install d rom... Build.prop wil b rewritten... So u hav to rerun d script.. Simple way is to make a widget n run whenever u feel like... ;-)
Sent from my GT-I9100G using xda premium
Cyanogenmod 9 - ver20120604
Stock CM9 kernel
V6 supercharged
walauu said:
Did you face the google apps forced close thing? I have this problem. I copy and paste the downloaded service.jag to the system/framework folder. After that, when I open terminal, type su => enter then it auto restart my phone. I restored my phone, try second time. The same thing. Everytime also su=> enter then auto restart. After restart then shows forced close to my google. Anybody know what is the problem?
Click to expand...
Click to collapse
For me it happened once... If u cnt use d built in terminal app.. Tn gt one from playstore... Der r mny terminal app...
Sent from my GT-I9100G using xda premium
Cyanogenmod 9 - ver20120604
Stock CM9 kernel
V6 supercharged
eldonly said:
how does it feel to be 100% supercharged?
is it crazy fast?
how is the battery discharge?
Click to expand...
Click to collapse
Instal it and experience for urslf.... ;-) Dude its nt overclocking d processor... Its jus changing build.prop settings... So der is less chance of battery drain...
Sent from my GT-I9100G using xda premium
Cyanogenmod 9 - ver20120604
Stock CM9 kernel
V6 supercharged
zarboga said:
Thanks a lot man
Sent from my GT-I9100G using XDA
Click to expand...
Click to collapse
If u wanna thank me... Thank ma original post...
Sent from my GT-I9100G using xda premium
Cyanogenmod 9 - ver20120604
Stock CM9 kernel
V6 supercharged
Hello,
Question 1 :
I'm on a Paranoid 1.3 and I searched in the settings, no way to enable the softkeys. So i would like to know if there's a way ( .zip or adb push ) to enable it?
Question 2 :
I came ( like every one ) from a stock rom with the ugly TW, but there was an apps killer in TW that was really usefull (much more than common killers) i would like to know if it's possible to port it or even to create a swap partition? Because my Note become a bit laggy after couple of hours of use.
Please forgive me for my bad english ( I'm French ) and if i made a post for an answered question but I searched i didn't found anything.
Thx
ningoune said:
Hello,
Question 1 :
I'm on a Paranoid 1.3 and I searched in the settings, no way to enable the softkeys. So i would like to know if there's a way ( .zip or adb push ) to enable it?
Question 2 :
I came ( like every one ) from a stock rom with the ugly TW, but there was an apps killer in TW that was really usefull (much more than common killers) i would like to know if it's possible to port it or even to create a swap partition? Because my Note become a bit laggy after couple of hours of use.
Please forgive me for my bad english ( I'm French ) and if i made a post for an answered question but I searched i didn't found anything.
Thx
Click to expand...
Click to collapse
1) settings>navigation bar
2) i face th same prob.....u can use cpu spy, better battery stats to identify rogue apps n freeze them with an app like titanium backup/rom manager
nd settings>developer options>dont keep activities nd background process limit to 4
3) flash anidroid kernel if on PA ics.....i find battery life to improve .....nd gives overclocking option to 1.6 ghz
here is v0.8
http://sourceforge.net/projects/ani...GPU_UC-UV_01082012_CWM_Flashable.zip/download
here is th thread link
http://forum.xda-developers.com/showthread.php?t=1761190
hit thanx if u think i helped u
chillteddy said:
1) settings>navigation bar
2) i face th same prob.....u can use cpu spy, better battery stats to identify rogue apps n freeze them with an app like titanium backup/rom manager
nd settings>developer options>dont keep activities nd background process limit to 4
3) flash anidroid kernel .....i find battery life to improve .....nd gives overclocking option to 1.6 ghz
here is v0.8
http://sourceforge.net/projects/ani...GPU_UC-UV_01082012_CWM_Flashable.zip/download
here is th thread link
http://forum.xda-developers.com/showthread.php?t=1761190
hit thanx if u think i helped u
Click to expand...
Click to collapse
Thanks chillteddyfor your answer,
I searched the navigation bar in setting but there is no ( I wached some videos to know where it is but i don't have this setting...
an i know the that i can overclock and and limit number of proces but the first one make the phone °C go very high and the second make the laucher and every apps refresh thet ugly and a it think it make waste more than win time.
thx anyway for your answer :cyclops:
im sorie i shd hv ckd ..u said PA 1.3 thts jb ....my bad :silly:
as for ur task manager try zd box its free frm th market nd is multi funtion
I tried ZD Box but like most of task killer it don't really kill the process it stop them so the apps reboot imediatly
######### ALL BUGS REMOVED ################
features of rom now :-
.1. working 14 toggle with usb connection.
.2. adrenaline engine 4.2 pre installed.
.3. rafaels latest kernel included again.
.4. removed stock browser cuz it was boring please try custom browsers from market.
.5. a stock keypad cant be installed in this rom. but swype is preinstalled so please type with your swype
.tested every app .(( i was tired with guys coming up with bugs ))
.memory tweak
.6. multi csc added to support many lanugages. dont ask me about a particular language under settings > local and text > select your language and use.
.7. gallery3d app re added. please choose your own lock and home screens
.8. beats audio engine for a perfect audio experience.
.9. a very different and attractive approach to screen resolution and texts to give a rich feel.
.10. 1 % battery mod added on request along with battery icon.
.11. a very sleek and stylish task manager like ics.
.12. memory tweak
#( applications get installed to your sd card because of this tweak but KINDLY DONT MOVE YOUR SWYPE TO YOUR SD CARD )
#( some apps rarely need to be on phone memory. for such apps use under "settings>manage applications" and click on that specific application and click on "move to phone" )
^ point me a bug and il shoot you (just kidding ) i killed my effin 3 days on this and i could spend a few hours more , so dont hesitate to point out bugs
pros and cons.
PLEASE MAKE A BACKUP OF YOUR CURRENT ROM UNDER CWM RECOVERY.
WHILE USING THIS ROM IF YOU MESS IT UP SOMEWHERE AND IF ITS UNDONE KINDLY WIPE DATA AND CACHE AND RESTORE YOUR NANDROID BACKUP ONCE MORE :: WIPING DATA AND TRYING TO REBOOT BRICKS YOUR PHONE SO :
=====>((RESTORE=RESET ))
STATUS : link ======> http://www.mediafire.com/?4jcv6u9jbjoa8w9
# how to install
1.you must install clockworkrecovery
2. dowload the archive from the link above. extract the folder "bijoy91"and paste it in ur sd-card/clockworkrecovery/backup
3. reboot . go to recovery by pressing home , power and volume up button simultaneously. get into clockworkmod backup and restore. select restore. select bijoy91 . done.
Dont just download. if you like my work come back and hit the THANKS button.
Pics please
"( ICS )" you mean ICS themed or ICS real?
Visurox said:
Pics please
Click to expand...
Click to collapse
:|
schakusa said:
"( ICS )" you mean ICS themed or ICS real?
Click to expand...
Click to collapse
it was already made by some repencis labs . i fixed the resolution and plenty of bugs. thats it.
nope no themes. the rom is faster compared to its counterparts.
Nice work. But an old kernel how much space and ram did it use? And if u want to tell it, which prog did u use to make it. Keep up the good work. Will test it asap
bijoy91 said:
it was already made by some repencis labs . i fixed the resolution and plenty of bugs. thats it.
nope no themes. the rom is faster compared to its counterparts.
Click to expand...
Click to collapse
you don't answer my question, I see in your screens "GINGERBREAD", so this is not ICS, this is ICS themed my friend, but thanks anyway, is a cool rom
one more question, are these screens from a gt-5830i ?
Visurox said:
Nice work. But an old kernel how much space and ram did it use? And if u want to tell it, which prog did u use to make it. Keep up the good work. Will test it asap
Click to expand...
Click to collapse
i included the latest kernel by rafael :\. ram consumption is like stock roms. depends on which bloat apps you decide to disable. i ve included system app remover as well
schakusa said:
you don't answer my question, I see in your screens "GINGERBREAD", so this is not ICS, this is ICS themed my friend, but thanks anyway, is a cool rom
one more question, are these screens from a gt-5830i ?
Click to expand...
Click to collapse
dude i am taking screenshots of my phone right now . its made from xxla4 gingerbread and morphed to look like ics without an external launcher app.
bijoy91 said:
i included the latest kernel by rafael :\. ram consumption is like stock roms. depends on which bloat apps you decide to disable. i ve included system app remover as well
Click to expand...
Click to collapse
Oh sry, was confused of the date under the kernel. I use root uninstaller with some personal tweeks, like an empty host file or just one notification sound and font.
i guess 5 screenshots are enough ???? note the time its 12:11 shown on the lock screen when i was uploading it . thats enough proof i guess
Green is kind of cool....but can you try and change into the real ics theme....i.e. Blue and black
Between ....nice work there
Sent from my GT-S5830i using Tapatalk 2
Androidnow said:
Green is kind of cool....but can you try and change into the real ics theme....i.e. Blue and black
Between ....nice work there
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
ahh blue and black reminds me of creeds 3.5 rom . the only issue after i fixed it is that you cant get internet settings automatically . if someone was to help but they often neglect newbies. i told many senior guys about creed 3.5 rom tho. this rom is much more stable than creed 3.5 and i felt. also creed 3.5 is based on xxla2 and xxla4 is classier , i feel
this rom is ****ng awesome..thnks dude
Arjun kar said:
this rom is ****ng awesome..thnks dude
Click to expand...
Click to collapse
YOUR WELCOME dont forget to hit the thanx button
ok fnd sme bugs..in stngs about rom fc..no default keyboard...
This is for the Galaxy Y, right (with fixed resolution)?
Looks ok so far.
You forgot to wipe your contacts before you did a backup.
Fc's when selecting About Rom.
I'll test it some more and let you know
Thanx
Great ROM Bijoy91. It works in gt-s5830m, but is it possible to add Spanish as a language?
How did you manage to fix the USB connection with the 14 notification icon bar?
Thanks
have ics screen buttons?