Hi , i got sensedroid v9 and i must say it is amazing!
Didn't knew my 'old' xperia could handle this full function android!
Only the camera isn't working, but i read that is by all of the android versions for xperia (exept NAND)
If i could post in the sensedroid thread, i would thank the maker alot !
But i have a question: i read that if you install a kernel, your Xperia becomes way faster, and yeah i would like that. But what is the best kernel to use with sensedroid? And what does this exactly do?
Again alot of thanx to the creator of sensedroid and hope you guys can give me some information
i think best kernel is midnights kernel. As far as I know it is allready included in the latest Sensedroid version. When not you find it in android section.
I would be very happy to hear that..
My V9 was using ygge's Turbo kernel, if you want to use Midnight's kernel you can download his V10 kernel HERE, and remember to change your startup command.
jerrytan93 said:
I would be very happy to hear that..
My V9 was using ygge's Turbo kernel, if you want to use Midnight's kernel you can download his V10 kernel HERE, and remember to change your startup command.
Click to expand...
Click to collapse
Hi, you are the creator of sensedroid right?
Thanx alot for it!
Is ygge's Turbo kernel faster then Midnight or not?
I never use my mobile phone more then like 9hours per day, so i dont care about the battery being empty earlier.
Also i have this question: If i make the android partitions on my SD bigger, will it be faster? like: if i make my cache partition like 1GB will it be faster then? or doesn't that matter at all?
Thanx for the replies, Jurre
JurrePs3 said:
Hi, you are the creator of sensedroid right?
Thanx alot for it!
Is ygge's Turbo kernel faster then Midnight or not?
I never use my mobile phone more then like 9hours per day, so i dont care about the battery being empty earlier.
Also i have this question: If i make the android partitions on my SD bigger, will it be faster? like: if i make my cache partition like 1GB will it be faster then? or doesn't that matter at all?
Thanx for the replies, Jurre
Click to expand...
Click to collapse
both kernel have same overall performance, for more kernel information go HERE to get the informations.
You may make your DATA partitions bigger because it will be your internal storage in Android, other than that it's not necessary to make other partitions bigger.
jerrytan93 said:
both kernel have same overall performance, for more kernel information go HERE to get the informations.
You may make your DATA partitions bigger because it will be your internal storage in Android, other than that it's not necessary to make other partitions bigger.
Click to expand...
Click to collapse
Ok but when i check the differences between midnight and turbo, i see that midnight charges better. And has better call function.
So i wanna try it out, but i dont get wich values i have to put in STARTUP.txt
Can you please post them? Also if i boot their haret.exe with values from sensedroids STARTUP.txt it rotates the screen 180 degrees. So i see the letters upside down , when i turn device i can read something like rootfs not found end it wont boot android how do i fix this?
Jurre (sorry for the questions)
JurrePs3 said:
Ok but when i check the differences between midnight and turbo, i see that midnight charges better. And has better call function.
So i wanna try it out, but i dont get wich values i have to put in STARTUP.txt
Can you please post them? Also if i boot their haret.exe with values from sensedroids STARTUP.txt it rotates the screen 180 degrees. So i see the letters upside down , when i turn device i can read something like rootfs not found end it wont boot android how do i fix this?
Jurre (sorry for the questions)
Click to expand...
Click to collapse
There you go.. download the attached file HERE, extract it and then replace them with the old files in your npkboot folder.
jerrytan93 said:
There you go.. download the attached file HERE, extract it and then replace them with the old files in your npkboot folder.
Click to expand...
Click to collapse
Thanks again! what a service!
Works like a charm, if i want the V10 i do only need to replace the 2 files wich i get in the V10 download from midnights topic? I will try it later, im already really happy with this ;D
Jurre Clicked the thanx button again
JurrePs3 said:
Thanks again! what a service!
Works like a charm, if i want the V10 i do only need to replace the 2 files wich i get in the V10 download from midnights topic? I will try it later, im already really happy with this ;D
Jurre Clicked the thanx button again
Click to expand...
Click to collapse
You are welcome..
Yes you only need to replace modules and zImage, no need to change startup anymore..
jerrytan93 said:
You are welcome..
Yes you only need to replace modules and zImage, no need to change startup anymore..
Click to expand...
Click to collapse
Oke thanks alot!!
Just 1. Last question : you said it is not necesarry to make the other partitions bigger, but do you mean it will work but is not actually needed or do you mean it is not working?
Jurre
JurrePs3 said:
Oke thanks alot!!
Just 1. Last question : you said it is not necesarry to make the other partitions bigger, but do you mean it will work but is not actually needed or do you mean it is not working?
Jurre
Click to expand...
Click to collapse
Not needed and waste of your SD card memory.. so can considered as not working..
jerrytan93 said:
Not needed and waste of your SD card memory.. so can considered as not working..
Click to expand...
Click to collapse
Haha oke,
Unless i still cant post in android development forum, i wanna say i can't wait for sensedroid v10!!!!
Jurre
Related
Included In MCR and derivatives from Fr15 onward - No need to patch!
Introduction
Removing the LG 'Software Update' function from your phone will give you back 20MB or more of RAM. This app runs all the time and restarts if it's killed. The thing is, if you're running a custom ROM this function will do little for you. It may notify you of an update but no updates will install over the top of your custom rom. And you get all your update notifications from here right?
However, simply removing the application package (OmaDmclient.apk) causes a problem with Settings. If the client app is removed the Settings | About Phone menu force closes. You save the 20MB RAM but you have an annoying consequence.
Removing this function provides a ~6% memory boost, a slight reduction in data use and an unquantifiable saving of CPU cycles.
Details
The relevant code is in Settings.apk, in factory ROM V10a (only some variants?) the OTA code is not active but simply taking the entire Settings.apk from V10a does not work on V10b/c. So what I did to address this:
Reverse engineered Settings.apk from V10a and V10b/c
Extracted code from V10a (java/com/android/settings/DeviceInfoSettings)
Inserted said code into V10b/c, replacing OTA code
Recompiled Settings.apk minus OTA code
Only LG code is included, none of mine, I've just ported it from one version to the next
And this allows the OTA client app to be removed without any negative consequences.
Compatibility
This is compatible with the LG Optimus 2x only, it will probably break something on the G2x variant.
This mod is not compatible with CyanogenMod for the Optimus 2x (it is unnecessary)
Included In MCR and derivatives from Fr15 onward - No need to patch!
Download
For Users - ClockworkMod Recovery Update Zip
Compatible with all ROM's based on MCR (MoDoCo) Fr4 and above (this is most at the moment)
Check with your ROM chef and make a backup if you're not sure
Download: LG-P990-OTA-Client-Eater-update.zip
Install from SD card in Recovery (installs new Settings and removes LG OTA client)
Hit Thanks below
For Chefs - To include in ROM's
Remove OmaDmclient.apk from /system/app/
Download: Settings-No-OTA-Client.apk
Rename and replace Settings.apk in /system/app/
Test by ensuring Settings | About Phone does not FC
Provide credit
Closer to stock Android one step at a time...
Enjoy!
Hi djmcnz
thanks for this mod..
i wanna try it, but i wanna ask before one things,
sorry for this questions maybe are just write in your post, but my english is not perfect, and sometimes i lost some information
With this mod we get 392MB or more of RAM or we have always 372 but with 20MB or more of RAM free ?
Thanks
tanoxxx said:
Hi djmcnz
thanks for this mod..
i wanna try it, but i wanna ask before one things,
sorry for this questions maybe are kust write in your post, but my english is not perfect, and sometimes i lost some informatios
With this mod we get 392MB or more of RAM or we have always 372 but with 20MB or more of RAM free ?
Thanks
Click to expand...
Click to collapse
No problem.
It will be 372 with 20MB additional available inside this. So you have the same total RAM but you will be using ~20MB less of it.
Not 392 sorry.
actually why we just got 372 ram while the spec is 512 mb? wheres the rest?
back to the topic, is it u mean paul's rom cant use this apk?
emprize said:
actually why we just got 372 ram while the spec is 512 mb? wheres the rest?
back to the topic, is it u mean paul's rom cant use this apk?
Click to expand...
Click to collapse
The rest is used as video RAM...
Paul's ROM, and all ROM's based on Paul's ROM *can* use this.
Tested it. Seems to be working fine.
I tryed it now,
FR12 all ok..
Thanks
tested on fr8, it works.
Tested on FR12 - Looks good, no fc
Works like charm.
Should be included in Custom ROM´s
MoDaCo FR12 Fear Edition 5.0 working fine!
Thanks for testing, first post updated
Nice one guys, thanks for testing and feedback. I've run out of "Thanks" for the day so I'll have to catch up later...
First post updated with update.zip and details for ROM chefs. If you're using a custom ROM, point this out to them, it's free!
Argh, sorry for the noobishness of this, but how do you remount /system/ to be r/w?
Works fine on TK-ROM v0.5.7
Thanks alot!
unfnknblvbl said:
Argh, sorry for the noobishness of this, but how do you remount /system/ to be r/w?
Click to expand...
Click to collapse
adb remount
or
busybox mount -o,remount -rw /system
But there's an update.zip in the first post now if you like
Thanks - for some reason, "adb remount" didn't work when I first got the phone, so I didn't bother trying again
Worked like a charm! Thanks!
Only thing I noticed was that 3G data seemed to have been broken after reboot, but I cleared Market data and cycled Airplane mode and all is well now.
Am using a RomKitchen 1.6 build with cpasjuste's kernel.
thank you so much!
i was looking for it for a long time..
MoDaCo FR12, it works great, no FC
Thanks a lot mate
Has anyone noticed any improvement, or does it seem the same???
WELCOME TO ROM QUY
Hey, I'm glad to bring to you this new release QUY v1.5
QUY is a well balaced ROM that works with the best kernel ever! Franco's kernel
v 1.5:
-Based on FW.10A .
-Froyo 2.2
-Busy Box
-SU
-full gapps
-Go Launcher EX
-Android Particles asboot animation
-Zipaligned Apks
-Deodexeded Apks
-WiFix thedering
-JIT on
-Heap size: 32MB
-Some small changer here and there..
-Hardware acceleration enabled
-Franco.Kernel 16FIX2 y zram INBUILD
-IO file manager
-Market Enabler!
-Changed status bar and notification stuff
-Custom Wallpaper
-Titanium Backup
-Batery %
-Advancer Task Killer
-Many other stuff I don't remember...
My Favorite game
-Spore
-You are free to install No frill or SetCPU after installling the rome for OverClock.
Screen Shots version 1.5
Known Bugs:
-None
I will laugh at you if you don't follow the instructions and you brick your phone while installing
How to Install:
-Download and copy into you sdcard QUY_v1.5_(by_daniequy).zip
-Go to recovery Mode
-you need an EXT4 512 MB, swap 0
-Wipe all
-flash from sd zip QUY_v1.5_(by_daniequy).zip
-Reboot
-Install No Frill or SetCpU overlock.
-And ENJOY!
*DESIGNER NEEDED, I WANT YOU TO MAKE A CUSTOM BOOT ANIMATION FOR QUY, IF YOU KNOW HOW CONTACT ME.
MANY THANKS TO:
-Ciaox For the GREAT support
-Francisco.franco for his SUPER Kernel
-Alevagre for the wallpaper
-http://www.chileandroid.com for the support
DOWNLOAD QUY V1.5
DEPOSIT FILE
MEDIA FIRE
MEGAUPLOAD
QUY V1.0
MEGAUPLOAD
WALLPAPER
COMMENT, THANKS.
Thats really nice. Btw why didn't you modify the status bar ?
Else this is a smooth release. I will try asap
+1 for your first ROM
DJoptimus-One said:
Thats really nice. Btw why didn't you modify the status bar ?
Click to expand...
Click to collapse
Cuz i like it
Thanks, try it out it is cool.
will gv it a try +1 for your efffort
thank you its seem a good rom
keep good work on
Really nice work up there.
I cant see the screenshoot...
Sent from my LG-P500
Did you not get the memo, I think the O1 community is through with 2.2.x roms with GB around the corner. Seems like a decent rom though, good try.
@meanmug
There wil be plenty of users who wil continue to use 2.2.x-roms.
On some phones there are people who went back to an eclair-based rom
So if someone wants to create a rom based on 2.2, let him/her do it and keep your mouth shut
_Arjen_ said:
@meanmug
There wil be plenty of users who wil continue to use 2.2.x-roms.
On some phones there are people who went back to an eclair-based rom
So if someone wants to create a rom based on 2.2, let him/her do it and keep your mouth shut
Click to expand...
Click to collapse
LOL +1 to this.
BTW just installed this rom, will give feedback after 24 hours testing.
Installed, but somehow even this is franco kernel v16, my phone gets kernel panic after OC @ 806 mHz. strange issue because with devoid.franco.v5 and franco.kernel.v16 I run smooth and stable with that freq.
Nice work,my tips helped you man
@_Arjen_: I am trying to build an Eclair rom (lol)
_Arjen_ said:
@meanmug
There wil be plenty of users who wil continue to use 2.2.x-roms.
On some phones there are people who went back to an eclair-based rom
So if someone wants to create a rom based on 2.2, let him/her do it and keep your mouth shut
Click to expand...
Click to collapse
Just seems like a waste to me with so many good and different 2.2.x roms already out, imho I think the devs here have completed froyo or nearing it, and its time to move on. But more power to him if wants to recreate what the other devs have already done, before its all said and done it'll end up being just like either one of the other roms, pick one.
meanmug said:
Just seems like a waste to me with so many good and different 2.2.x roms already out, imho I think the devs here have completed froyo or nearing it, and its time to move on. But more power to him if wants to recreate what the other devs have already done, before its all said and done it'll end up being just like either one of the other roms, pick one.
Click to expand...
Click to collapse
If you saying they have completed Froyo you are from one point correct, that means Devoid, but in other way there are different needs for roms so perhaps you will see some more 2.2 ROMs in near future
nikoltu said:
If you saying they have completed Froyo you are from one point correct, that means Devoid, but in other way there are different needs for roms so perhaps you will see some more 2.2 ROMs in near future
Click to expand...
Click to collapse
I guess I'll jump into this rom building thing, first I'll extract my rom from phone, remove some useless apps, zip it up, post it, and heres what you'll have "void#delta, franco kernel .v16, zram, go launcher, and superblue .v4 theme"
meanmug said:
I guess I'll jump into this rom building thing, first I'll extract my rom from phone, remove some useless apps, zip it up, post it, and heres what you'll have "void#delta, franco kernel .v16, zram, go launcher, and superblue .v4 theme"
Click to expand...
Click to collapse
WOW!a new dev posts a new rom,now half of his post is spam!
ciaox said:
Nice work,my tips helped you man
@_Arjen_: I am trying to build an Eclair rom (lol)
Click to expand...
Click to collapse
O yes! thank you very much for all the support (lol)
mathew3184 said:
WOW!a new dev posts a new rom,now half of his post is spam!
Click to expand...
Click to collapse
AMEN
Your mikshake brings all the noobs to the yard
I dont know why people are on this guy. He is learning how to do things and is excited about showing us what he has done and all people have done is complain about another 2.2 rom. So like if you cannot make the best rom ever for the p500 then dont bother doing anything? And if it is not the best rom ever then god forbid dont post it for other people to look at.
Whatever, good job on the rom and keep up the good work.
New version released.....
Fantasy, is it support RTL language ?
Hi!
This is clean v20b(but has 3g fix in kernel) rom with my custom kernel with BFS, Simple I/O, minmax ... All the stuff you know from my AOSP But there is one thing that I love It's even smoother than my 2.3 and all works on it It is 100% stock - it doesn't have JIT and even it is not rooted... It is just fast and very stable rom for guys using phone just for dialing... I will add DSP and requested by u guys features over the weekend
Screens:
Download for new recovery:
MOD EDIT: Links removed
PS: on this kernel you won't get sd card removed error !
IS this like a new ROM????
Does it speed up the phone??
androidboss7 said:
IS this like a new ROM????
Does it speed up the phone??
Click to expand...
Click to collapse
Read first post carefully man ... Yes, kernel tweaks are mainking it smoother but game performarce is the same as on LG rom ... And it is running on batt for 5 days without problem
mikegapinski said:
Read first post carefully man ... Yes, kernel tweaks are mainking it smoother but game performarce is the same as on LG rom ... And it is running on batt for 5 days without problem
Click to expand...
Click to collapse
Sorry!!!
I will be trying this out soon!!
Cause i'm going back to 2.1 just in case!!
Keep up the WORk!!!
http://adf.ly/2wDMQ get it there
mikegapinski said:
http://adf.ly/2wDMQ get it there
Click to expand...
Click to collapse
How do you install it??
So basically the only difference is the kernel with BFS, sio, etc.? In that case why not just release an update zip with the kernel and all that other sweet stuff, like Quarx did with his 0.3.1 instead of a whole rom?
I will do it that way ... Someone flashed it ? I get various reports that iy doesn't boot... I will update new package within a few hours
http://www19.zippyshare.com/v/53422081/file.html here is the kernel with fix for wifi... Replace the boot.img and wireless.ko with the new one in the zip package
Sent from iPad
Also you can use this boot and module to whatever 2.1 you want.
Hey, to save you the trouble, I tried to be useful, so i *tried* to make this into an update.zip to make it easy for people. However, I leave testing it up to you, because my battery's low atm, so it's not a great time for flashing(also I'm on SwiftDroid ). Please try the file, and see if it works, and maybe then I'll be able to say I've done something useful. Download.
P.S. I'm not really sure about permissions for the wireless.ko file, so I skipped that bit. If something screws up, perhaps it will be this?
mikegapinski said:
http://www19.zippyshare.com/v/53422081/file.html here is the kernel with fix for wifi... Replace the boot.img and wireless.ko with the new one in the zip package
Sent from iPad
Click to expand...
Click to collapse
Is this an update or a full rom???
Sent from my GT540 using Tapatalk
nutterbg said:
Hey, to save you the trouble, I tried to be useful, so i *tried* to make this into an update.zip to make it easy for people. However, I leave testing it up to you, because my battery's low atm, so it's not a great time for flashing(also I'm on SwiftDroid ). Please try the file, and see if it works, and maybe then I'll be able to say I've done something useful. Download.
P.S. I'm not really sure about permissions for the wireless.ko file, so I skipped that bit. If something screws up, perhaps it will be this?
Click to expand...
Click to collapse
Chmod for module is 644.
Sent from my GT540 using Tapatalk
pebe94 said:
Chmod for module is 644.
Sent from my GT540 using Tapatalk
Click to expand...
Click to collapse
I have to leave the house now, so I'll try to take care of it in the afternoon. Would you mind testing it anyway? Also, in the updater-script of the zip I used as an example I see lines like:
Code:
set_perm_recursive(0, 0, 0755, 0644, "/system/lib/modules");
I see the 644 you mentioned, but what about the other numbers? If you can fix the zip, do it yourself, otherwire I'll have a look this afternoon.
What exactly is "3g" fix?
can i request tun.ko for this rom? i rely heavily on vpn and have been looking for a 2.1 with tun support. anyways great work
Sent from my GT540 using XDA App
mikegapinski said:
http://www19.zippyshare.com/v/53422081/file.html here is the kernel with fix for wifi... Replace the boot.img and wireless.ko with the new one in the zip package
Sent from iPad
Click to expand...
Click to collapse
Unable to boot...rebooting by it self what to do???...tried the new boot
PavanR said:
Unable to boot...rebooting by it self what to do???...tried the new boot
Click to expand...
Click to collapse
Do wipe. I recommend flash boot through fastboot and replace wireless.ko through adb on working ROM.
Sent from my GT540 using Tapatalk
pebe94 said:
Do wipe. I recommend flash boot through fastboot and replace wireless.ko through adb on working ROM.
Sent from my GT540 using Tapatalk
Click to expand...
Click to collapse
I have Wiped it Completly many times and Did the Recovery but of no use...
I will try again...
Can u tell me the Command to replace with adb....
Adb push wireless.ko system/lib/modules
The ROM is a PREVIEW of PURE KU5900 ICS.
Compiled 3.0.8 kernel (LG Open Source Code Distribution) + some commits from arcee.
I declare the ROM to be OPEN. Hackfest! Do whatever you like on it.
ALWAYS MAKE A BACKUP OF YOUR OLD ROM AND SD CARD CONTENTS
V30G: https://hotfile.com/dl/173312947/36acab4/Black_Test1_signed_091912.zip.html
MD5: 72d3b03bef38e65481c8d0169e3e60b3
V30I: https://hotfile.com/dl/174050051/2691987/ICS_V30I_120927.zip.html
MD5: 0F2ADD6838404DBD77693823FCF394CB
SHA-1: C5E1BEB1BAEB6E0C180465C29D17EB9739FE823D
OLD HOTFIX: https://www.box.com/s/mlh5g6splp2nzkkd0vcu
OLD HOTFIX should be FLASHED in CWM. Wipe CACHE/DALVIK CACHE. It includes LEDFIX with Blue, BPaul's SD Mount method, Chen-1's featureset.xml, settings.xml.
Settings for LEDS: Menu>System settings>Display>Front key light
To help a bit on scrolling, you can force GPU rendering: System settings>Developer options>force GPU rendering
To install .apk apps from SD: System settings>Security>Unknown sources
BUG/S:
Automatic Time
SMS (other countries): If you have problems with the new SMS files, revert to old fixes. As i cannot repoduce all. My SMS works.
USSD
SD card: If you have problems with SD Card here are your options.
1. http://forum.xda-developers.com/showpost.php?p=32235428&postcount=86
2. http://forum.xda-developers.com/showpost.php?p=32120202&postcount=721
3. http://forum.xda-developers.com/showpost.php?p=32032718&postcount=517
SMS Problem?: http://forum.xda-developers.com/showpost.php?p=31990528&postcount=30 and http://forum.xda-developers.com/showpost.php?p=32030132&postcount=503
Just a reminder:
Need FULL wipe (data/cache/dalvik cache) coming from any ROM.
Code:
[B]V30I[/B]
It uses some V30G libs. The kernel was somehow incompatible with V30I.
Might be gralloc and PVR/EGL libs
The V30I WEBSW kernel is different from the V30I (Kernel) LG Open Source Code
For days of hard work: Credits to
xonar_
navossoc
Redy
NOOBY0815
George Jetson
Sisqo
BPaul
Chen-1
boype
basean
reserved
I am just the slave of the 2 above me I was only the little uploader They made me do it, I swear I have nothing to do with it actually
It's running fluide, the language will be english by default, didnt try morelocal yet, it's rooted of course.
Another fix for sdcard:
Thanks to Sisqo:
Here are the CHANGES
And HERE you can find the modified files. It's getting better and better
Repack with V30i and all current fixes + LG stuff removed is in work
Since the repack of V30I doesnt wanna work, I at least provide you the files of /system and /system2. /system2 folders need to be moved to /system/vendor (at least /etc, /lib and /firmware). I additionally moved the /bin and /app folder to its' corresponding folder in /system.
HERE is the link
Now have fun trying to repack it on your own
WOW!!! I'm flashing this now!! Incredible...
Thanks Gabwerks and Others.Finally "official"Rom for LG p970
Hope u fix SD mounting ASAP!-UniversalSS
Sent from my LG-P970 using xda premium
NICE .... pressed thank you button good work
is it bootable?
timvdhoorn said:
is it bootable?
Click to expand...
Click to collapse
Yes.
Thank you guys, I love you
Unfortunately, I can't hit the thanks button ( I already did it 8 times today )
one word: Nice.
Siguiriya said:
WOW!!! I'm flashing this now!! Incredible...
Click to expand...
Click to collapse
Can u post some screen shots pls
Thx
Sent from my LG-P970 using xda app-developers app
timvdhoorn said:
is it bootable?
Click to expand...
Click to collapse
Lol bro yes it is Just download and enjoy. Running on my phone already
thanks ! I will try it.. in 20 minutes because of my internet conection.
how is the battery life????
aasimkhan30 said:
how is the battery life????
Click to expand...
Click to collapse
just come out already ask how long does the battery last?
*facepalm*
Maybe make a flashable zip fix for the sd card mount instead of uploading the whole rom again
Sorry guys, my thanks limit today is over, BUT thank you ALL for great work for us, i think P970 community is the best one on XDA.
nhanzes said:
Yes.
Thank you guys, I love you
Unfortunately, I can't hit the thanks button ( I already did it 8 times today )
Click to expand...
Click to collapse
can you post more things about this rom here pics video or something else have any bug?
aasimkhan30 said:
how is the battery life????
Click to expand...
Click to collapse
Well you have the best questions, do you
sent from my nokia 3310 using xda premium
Awesome ! GJ guys.
So, if sd mounting doesn't work, it means that I can't listen to music or watch pictures right?
Sent from my LG-P970 using xda app-developers app
dieselman6969 said:
can you post more things about this rom here pics video or something else have any bug?
Click to expand...
Click to collapse
Sorry, I'm still downloading. But test it, you won't lose your time.
voonkz said:
Awesome ! GJ guys.
So, if sd mounting doesn't work, it means that I can't listen to music or watch pictures right?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
No. You can listen to music, take photos...
The only thing you can't do is acess your sd card. You can only do that in recovery, it isn't a big problem.
Hi guys...i'm moving all discuttion of MK kernel for stock 4.1.2 from Sami OS thred to here so that Developemnt therad of SamiOS remains clean
Kernel & link
latest version with No teraing and almost bug free... here are some changes/review
#version3Latest Version Download
#version4One more version it should work for i9070P & some more features
NOTE : This is not my work , @mkaluza initiated it for CM and @PolishVodka made it available for Stock 4.1.2 you should thank them both
Below is Older version with some bugs mentioned below...so not recommended !
PolishVodka said:
Here is mkaluza's kernel for stock JB, working:
Click to expand...
Click to collapse
http://www.mediafire.com/?x6gw3cg833x8k51
To install Flash zip in cwm or twrp
Personally I use smartassv2 (more smooth than default dynamic which is more battery friendly ! )
1.2GHz OC
And some init.ds to make UI more smoother...which you can find here
You guys should check mkaluza wikis in github too . Lots of useful info there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor
To all
some more info about MK stock kernel
Ram available for user was 647 MB for me ( 650 i n latest ! )
multitasking and app loading was exceptionally better !
to newbies plz don't blindly follow cocore commands/ init.d here bcz there are some changes here..[B].if you don't understand or used to with kernel commands and things , I advised you to stay way from this kernel for little while till final build comes[/B]
you can go for it now
and keep one thing in mind nandroid back up created by phillz recovery won't work with simple CWM ( atleast it didn't work for me) though it works with phillz
so if you use this kernel and you need to take backup... flash cocore and do it ...or use temporary CWM
Some discussion
1st one here is about 1st build...so if you wasn't aware of it you can skip this one and go to review directly
hastalafiesta said:
Try to extract 4.1.2 ramdisk and put it in /efs, then flash mkaluza kernel.
I have followed this simple step to make it bootable on cm 10.1.
You can find the guide to extract it on mkaluza thread.
Click to expand...
Click to collapse
it won't work like that in stock 4.1.2 but
anyway @PolishVodka made one more build and it booted ..i tested it...there are some minor bugs in it which i reported and he will make final build and publish it... ( though i didn't get reply yet... may be this is because of time difference and when i reported there should be night
here is copy of my final review which i send to him
PSS : you got my reply about kernel booting right ?
Click to expand...
Click to collapse
Yes, yes I got your previous message.
No problem I can wait till tomorrow for your review. Thank you.
Click to expand...
Click to collapse
good stuff 1st
performance is exceptionally good ...i mean very very good especially with smartassv2
battery life is decent with smartassv2 & dynamic
no random reboot at all with OC @1.2
overall very stable
now some bugs
i alreay told yesterday about faint horizontal lines ( though they are not hurting much but still if they can be removed it'll be great ) & Jumpy UI
now one weird bug and it must be fixed ...is when we rotate screen it flickers very badly and turn offs this problem is lesser in smartassv2 & excessive in dynamic
see videos below
smartassv2
dynamic
you can see smartass v2 can open COC without waking screen while in dynamic i have to wake it ( actually screen doesn't look it self but it turns off so to wake it i hve to lock it and unlock it again ) ...and while seeing such Turned off scrren in complete Dark i can see screen on/off faintly which means process of loading is there but don't know why screeb offs
one more video...i'm not sure you can see it properly but whole track of tamplerun 2 is little bit jumpy
i'm hoping you can fix this bugs and make more smoother...you can ask cocafe for help in both of these or you can check his github for help to make UI smooth ( see master branch bcz in refresh version UI is not that smooth )
and don't abandon this kernel without fixing because it has really good potential , support this kernel as long as you can
and finally you should change default governor to smartassv2.. it's more resopnsive than dynamic , better performance and not much battery drain ... Newbies will like it more and experience user can chance if they want to use Dynamic and see difference by them self
Finally Thanks for this kernel
Click to expand...
Click to collapse
buffer overflow said:
Yes, is working but without boot animation.i chose Pegasusqplus and Sioplus. UPDATE:CRT Off animation not working even if it is checked.
Click to expand...
Click to collapse
isaak said:
Maybe you were using a custom boot animation?
Then there is no kernel support.
Click to expand...
Click to collapse
stock boot animation was working for me
yah it doesn't support CRT but i don't care. and IMO this feature is now worth to waste time
Cassiusss said:
Have you noticed that with Mk Kernel on JB, the screen seems to be a bit brighter than usual?
Click to expand...
Click to collapse
yah it's more brighter this is because you are comparing it with cocore not stock kernel ...in cococre auto brightness was lowered !
.
@PolishVodka please put something on github, or at least tell us what have you changed in the kernel, if we collaborate we could have a bugless kernel! @ChronoMonochrome can you help us to fix the errors mentioned in the op?
jineshpatel30 said:
it won't work like that in stock 4.1.2
Click to expand...
Click to collapse
This is not true.
Official Mk Kernel works with no problem on stock 4.1.2. I've used JB-4.1-stock-CoCore-cwm-6.0.3.4.boot.cpio.gz ramdisk, renamed to boot.cpio.gz and placed in the efs folder. Then installed the kernel 5.4.0 no swap.
jineshpatel30 said:
it's more brighter this is because you are comparing it with cocore not stock kernel ...in cococre auto brightness was lowered!
Click to expand...
Click to collapse
I'm comparing it with stock kernel... and it's brighter. I have no doubts.
Boot animation working for me too.
Camera opening makes the screen tearing. (on both PolishVodka and official versions)
Cassiusss said:
This is not true.
Official Mk Kernel works with no problem on stock 4.1.2. I've used JB-4.1-stock-CoCore-cwm-6.0.3.4.boot.cpio.gz ramdisk, renamed to boot.cpio.gz and placed in the efs folder. Then installed the kernel 5.4.0 no swap.
Click to expand...
Click to collapse
i was talking about 1st release by PolishVodka. not any other official build
and official versson wasn't suppose to be used with stock rom..it may work but there is chance you end up with something bad
I'm comparing it with stock kernel... and it's brighter. I have no doubts.
Boot animation working for me too.
Camera opening makes the screen tearing. (on both PolishVodka and official versions)
Click to expand...
Click to collapse
if you have no doubt then check with some brightness and illumination test app and you will see stock & this kernel have same brightness level !
Not only camera opening any rotation to screen makes it tears most of times ...
& this thread is not about official MK if you still using it have some problem then you should report it in official thread
@jineshpatel30 : How much free ram you have ?
Force said:
@jineshpatel30 : How much free ram you have ?
Click to expand...
Click to collapse
647 MB...i wrote is in OP as well
Why ?
jineshpatel30 said:
i was talking about 1st release by PolishVodka. not any other official build
Click to expand...
Click to collapse
You have answered to Reinkaros here http://forum.xda-developers.com/showpost.php?p=59215110&postcount=804 and Hastalafiesta here http://forum.xda-developers.com/showpost.php?p=59255043&postcount=821
They have suggested to use official MK Kernel but you instead have tried to use the ramdisk with the first release of PolishVodka... so that's why your phone failed to boot. First release of PolishVodka will never boot. And that's why he released a second version.
And this second version seems to be nothing else than the official Mk Kernel with included stock ramdisk and some more zram.
Both official and PolishVodka versions act the same.
Ah, and that brightness levels are the same means nothing if the screen is still brighter...
Anyway now i'm using PolishVodka version and i'll be glad to help.
jineshpatel30 said:
647 MB...i wrote is in OP as well
Why ?
Click to expand...
Click to collapse
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?
647 MB is total ram, not free ram.
I fix screen tearing and flickering in my Kernel using this commit by mkaluza. Hope it works for PolishVodka :good:
display-s6e63m0: revert "remove DDR_50_OPP requirements for screen on"
Force said:
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?
Click to expand...
Click to collapse
Oh i though you asked about how much ram is there for user to use sorry
Cassiusss said:
You have answered to Reinkaros here http://forum.xda-developers.com/showpost.php?p=59215110&postcount=804 and Hastalafiesta here http://forum.xda-developers.com/showpost.php?p=59255043&postcount=821
They have suggested to use official MK Kernel but you instead have tried to use the ramdisk with the first release of PolishVodka... so that's why your phone failed to boot. First release of PolishVodka will never boot. And that's why he released a second version.
And this second version seems to be nothing else than the official Mk Kernel with included stock ramdisk and some more zram.
Both official and PolishVodka versions act the same.
Ah, and that brightness levels are the same means nothing if the screen is still brighter...
Anyway now i'm using PolishVodka version and i'll be glad to help.
Click to expand...
Click to collapse
Gald that you ate willing to help
Zram enabled in polishvodka verson ?
I don't think so
Epirex said:
I fix screen tearing and flickering in my Kernel using this commit by mkaluza. Hope it works for PolishVodka :good:
display-s6e63m0: revert "remove DDR_50_OPP requirements for screen on"
Click to expand...
Click to collapse
@PolishVodka
Check this...
Force said:
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?
Click to expand...
Click to collapse
You got very very excited boy !!!!
You guys should check mkaluza wikis in github too . Lots of useful stuff there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor
Reinkaos said:
You guys should check mkaluza wikis in github too . Lots of useful stuff there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor
Click to expand...
Click to collapse
Added to OP
hastalafiesta said:
@ChronoMonochrome can you help us to fix the errors mentioned in the op?
Click to expand...
Click to collapse
Why asking me? I'm not a stock user and don't have janice too. Never had mentioned bugs. I can only suggest to use Interactive/ZenX to make some games lagless.
P.s. original thread of the tweak for increased RAM http://forum.xda-developers.com/gal...jb-kk-lp-ram-repartition-to-691-1-mb-t3043437 .
ChronoMonochrome said:
Why asking me? I'm not a stock user and don't have janice too. Never had mentioned bugs. I can only suggest to use Interactive/ZenX to make some games lagless.
P.s. original thread of the tweak for increased RAM http://forum.xda-developers.com/gal...jb-kk-lp-ram-repartition-to-691-1-mb-t3043437 .
Click to expand...
Click to collapse
Just because I know you have a great knowledge about kernel and so I thought about asking you.:good:
hastalafiesta said:
Just because I know you have a great knowledge about kernel and so I thought about asking you.:good:
Click to expand...
Click to collapse
Just wanted to say that mentioned bugs maybe not a kernel fault. It's difficult to advice anything especially because it's just reports about lagginess in some games. I'm not a hard gamer too. Maybe you can compare same things on various ROMs.
ChronoMonochrome said:
Just wanted to say that mentioned bugs maybe not a kernel fault. It's difficult to advice anything especially because it's just reports about lagginess in some games. I'm not a hard gamer too. Maybe you can compare same things on various ROMs.
Click to expand...
Click to collapse
Well i'm also not hard gamer..and i gave the examples where bugs was most clear
I took Dolphin browser to show screen tearing while rotation
Then COC for screen goes off during loading ( perhaps this happes in landscape apps only )
And finally TR2 to show jumpyness
But these bug weren't only in this things specifics...one can see jumpy UI in setting also , screen tearing in other apps like one person said in camera on/off
So it's not just about game and rom related bcz with same Rom and cocore any of given bugs is not there !
Anyway i didn't get any reply from PolishVodka since last build so may be he's too busy or may be this is it for this kernel !
@hastalafiesta
If you have some knowledge about kernel and you wants to continue you should start it from MK kernel Github bcz @Cassiusss was able to boot it directly on stock by boot.cipo.gz and you can ask PolishVodka if you stuck on boot , about how to fix it