Database Develop

Radio flash error please help

How you guys doing,
I'm new to this whole thing.
I'm trying to flash my phone with the hero rom.
I just rooted it and trying to install the new radio.
It gives this error.
E:Failure at line 2: assert getprop("ro.product.device") == "dream" || getprop("ro.build.product") == "dream"
I tried google at searched here but found nothing. Please help guys if you can

Does it do it when you try to flash a rom also, by the way with you being a noob I would suggest not going for a hero rom right away but go to a cyan build to get your feet wet oh and this thread will prob get trash since it should be in the q and a section

I haven tried flashing the rom yet.
I'm on the first step where I have to flash the radio with the ota-radio-2_22_19_26I.
After that I'm doing the SPL and then the JACHeroSki-v1.5r2 rom.
Sorry but wasnt sure where to post the question.

Also what is the cyan rom?
Does it have the flash enabled browser and the widgets like hero?

It's not a hero rom, it is a heavily optimised cupcake build but I suggested it so you could get used to flashing before you try the danger spl and risk bricking your phone, hero is slow and laggy even still with a linux swap and flash is only flash 9 and not 10 witch is what most sites require so the most you can do is see flash ads.

sage
sage
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Oh and make sure you have the cyanogen recovery image 1.4 before doing anything, this way you can make a backup of your current build in case of any back fires.

Z҉A҉L҉G҉O̚̕̚ said:
sage
Click to expand...
Click to collapse
O-great-provider-of-demotivational-images-for-threads-made-in-the-wrong-forum, what other wisdom do you have for us?

david1171 said:
O-great-provider-of-demotivational-images-for-threads-made-in-the-wrong-forum, what other wisdom do you have for us?
Click to expand...
Click to collapse

Wow, way to be extremely ignorant zalgo, instead of welcoming people into the community and helping them out with their problems, you would rather tarnish the name of xda in a whole by being rude.......good job buddy so proud of you

Big, since I saw in the other post that you that flashing a new download of the radio did not work, it is possible that you do not have root or your recovery image is not valid

well I did the 1 click root method, which flashed the cynagen recovery image and then restarted by holding power and home.

I am unfamiliar with the one click root since I did it the old fashion way awhile back but I would try to flash something like a non hero rom first and see it that goes through, if it does and it takes at least 10 minutes to boot up the first time then we know it's not a root or recovery issuse and that it would just be a bad file issuse

I mean it will take at least 10 minutes to boot the first time after any new rom

so you are saying I should not flash the radio or the spl and just try flashing a non hero rom to see if it works?

Exactly, if it gives you an error when you try that also than we will be closer to figuring out the problem, it would suggest cyanogen 4.02 which is a stable steady rom

I found a Cyanogen 4.0.2 32a rom. Is that one good?
So I basically rename the rom to update.zip and flash it?

No the a is for the htc magic, go to dream android devolpment and download it for the g1, than make sure it is on the root of your sdcard< root is on the main folder not in any sub folders> and go into recovery and hit apply any zip, with cyan 1.4 recovery, you do not need to rename as update

If you did use the one click root method from 1.5, you should have the 1.5 radio...Go to settings > about> baseband version and it should end with 2.22.19.26I. If so you can flash a cyanogen ROM straight away.
If zalgo could quit being an ass that would be nice too.

Looks like its working, its installing the rom right now.

OTA 5.5.893 Released!

I just got a notice on my phone to update to 5.5.893. I should wait to apply forever root first, right?

wrightrocket said:
I just got a notice on my phone to update to 5.5.893. I should wait to apply forever root first, right?
Click to expand...
Click to collapse
yes you need to do the forever root first and be bone stock

wrightrocket said:
I just got a notice on my phone to update to 5.5.893. I should wait to apply forever root first, right?
Click to expand...
Click to collapse
If you want root!

Hmmm, I just checked & didn't have an option to update. "Your device is up to date."

Same here no update
Sent from my DROID BIONIC using XDA App

Just checked, no update available for me. I have been keeping stock so far. If i get to .893, I can SBF back and then do the foreverroot technique, correct?

54lzy said:
Just checked, no update available for me. I have been keeping stock so far. If i get to .893, I can SBF back and then do the foreverroot technique, correct?
Click to expand...
Click to collapse
you can but it is easier if you do the foreverroot first then install the update

This for real? Anyone else see this update? I can't believe that there would not be more press on this if was actually rolling out.

No. We would see documentation from vzw. The op is either confused or lying.
Sent from my DROID BIONIC using XDA App

It's Real!
The screen capture of the dialog is at:
https://picasaweb.google.com/lh/photo/HU4aB6YX0F-9C2zqoRBSRA?feat=directlink
Funny thing when I did:
find /cache -mmin -5
I found the files were actually named:
/cache/Blur_Version.5.5.893.XT875.Verizon.en.US.zip
/cache/Blur_Version.5.5.893.XT875.Verizon.en.US.crc
I have copied these files to my sdcard, if anyone has a place to host them let me know!

From my logcat
10-30 17:59:19.468 757 1867 I WSBase : doRequest(): url: http://ws-cloud2-sdc100.blurdev.com....5.5.886.XT875.Verizon.en.US:-143928019&ssl=0

Interesting. Perhaps a vzw push mistake? Usually we see documentation before these go out.
Sent from my DROID BIONIC using XDA App

I've tried to install twice and failed
Just to let you know, I have downloaded and attempted to install the update twice.
Once, foolishly hoping I could just update R3Blur3d, and again from close to stock.
This last time, I attempted the update from within Clockwork Recovery, and it gave me some details, the automatic update didn't:
assert failed for the file /system/build.prop, rebuild.fingerprint.
To me, it looks like, if the /system/build.prop file is modified, then this OTA won't go through.
I'm going to make sure, I'm as close to stock as possible and try again!

You would have to flash these in stock recovery on a forever rooted stock phone. Don't use clockwork.
Sent from my DROID BIONIC using XDA App

Very Interesting
Once my phone was set totally back to stock, my phone said that there is no update available. It still says that it will not install the update zip file I have due to a problem with the build.prop file.
Originally, I was running R3Blur3rd, which had system files based upon 5.5.893. So, I'm not sure what this update notification meant.

OTA 5.5 Update is being rolled out in batches in an attempt to prevent another data outage like they had when the iPhone 4s rolled out. Fyi
Sent from my DROID BIONIC

Which is being rolled out? 5.5.893 or 5.6.893?

stevessvt said:
Which is being rolled out? 5.5.893 or 5.6.893?
Click to expand...
Click to collapse
5.5
Sent from my DROID BIONIC

wrightrocket said:
Just to let you know, I have downloaded and attempted to install the update twice.
Once, foolishly hoping I could just update R3Blur3d, and again from close to stock.
This last time, I attempted the update from within Clockwork Recovery, and it gave me some details, the automatic update didn't:
assert failed for the file /system/build.prop, rebuild.fingerprint.
To me, it looks like, if the /system/build.prop file is modified, then this OTA won't go through.
I'm going to make sure, I'm as close to stock as possible and try again!
Click to expand...
Click to collapse
When you get this flashed, please post a screen shot of your about phone settings. The 5.5 file is much larger than 5.6. The 5.6 file has a new LTE radio and webtop app nothing more. So technically, you should receive both 5.5 & 5.6 OTA.
Thanks

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.6.893
Sent from my DROID BIONIC using xda premium

Marshmallow 6.0 update for Sprint

Just received an update for Sprint. I'm in northern Indiana.
Was 995MB I believe. Downloaded and updated OTA
Just finished updating. I'll play with it over the weekend and report back if anyone is interested.
(at this point, I really don't care about root or bootloader unlock. I've kinda given up hope for bootloader unlock and figured I'd update since I'll look for another device soon anyway)
Sent from my LGLS991 using Tapatalk

So is it Marshmallow?

Did anyone get an error trying to upgrade? I got this error when I tried to upgrade.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not sure why I've gotten this error twice now.

I haven't even gotten the update yet. Hmm...that's weird though. Have you tried restarting your phone? Does it show that the download is complete?

Downloaded the tot file and used LG up software. Worked great
Sent from my SM-N920P using XDA Free mobile app

ggee6688 said:
Downloaded the tot file and used LG up software. Worked great
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
I did the same thing on Saturday.

jmb521 said:
I haven't even gotten the update yet. Hmm...that's weird though. Have you tried restarting your phone? Does it show that the download is complete?
Click to expand...
Click to collapse
I've restarted my phone and then the update message doesn't show up. It does say the download is complete, I tapped "Restart and Install," it counted down from 10 and starting the upgrade then gave me that error message.

Subject 18 said:
I've restarted my phone and then the update message doesn't show up. It does say the download is complete, I tapped "Restart and Install," it counted down from 10 and starting the upgrade then gave me that error message.
Click to expand...
Click to collapse
I'm not a G4 owner (lurking here trying to decide on my next phone) but it sounds like a bad download. I'd use a file browser and see if you can find the update file on the root of your internal storage. Perhaps deleting it and letting it download again will help. Or update manually as the folks above said.

dr_gibberish said:
So is it Marshmallow?
Click to expand...
Click to collapse
Yes. 6.0
Sent from my LGLS991 using Tapatalk

Subject 18 said:
Did anyone get an error trying to upgrade? I got this error when I tried to upgrade.
I'm not sure why I've gotten this error twice now.
Click to expand...
Click to collapse
If you are rooted it won't work from OTA update.

2348z said:
If you are rooted it won't work from OTA update.
Click to expand...
Click to collapse
But I'm not rooted anymore.

Should work then, if not you can flash the .TOT file that's in Android development. It's the official version.

ggee6688 said:
Downloaded the tot file and used LG up software. Worked great
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
Can you please tell us the process so other can try this?

New update PI2 (20160929) SPH-L720 (L720SPTGPI2)

Has anyone else received, and installed the new update?
I had it pop up this morning, 20160929, already downloaded (update.zip in /cache partition).
Opened the zip, and I see it has its own build #, the PI2.
This string is from the updater-script file:
Code:
file_getprop("/system/build.prop", "ro.build.fingerprint") == "samsung/jfltespr/jfltespr:5.0.1/LRX22C/L720VPUGOK3:user/release-keys" ||
file_getprop("/system/build.prop", "ro.build.fingerprint") == "samsung/jfltespr/jfltespr:5.0.1/LRX22C/L720VPUGPI2:user/release-keys" ||
The update prompt message is pretty vague:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm sure it will fail to flash with custom recovery (TWRP) on rooted stock ROM, with quite few system apps removed.
P.S.: If someone desires that update.zip, let me know, and I'll upload it.
Just wanted to share...

Weird, it hasn't been released for the L720T and they've gotten every other update first. I can't find any information about changes or anything, only place that it appears is on Samsung's open source website.

Yeah, I didn't see anything new on Sammobile either.
Sent from space

sammobile has been pretty slow to mention / add new firmwares the last 4-6 months, with exception to brand new flagship updates

Can anyone separate modem flashable?

cheers_w said:
Can anyone separate modem flashable?
Click to expand...
Click to collapse
At this point there's nothing to separate. It's still only an OTA.

Can you please upload the zip?

onree said:
Can you please upload the zip?
Click to expand...
Click to collapse
Here you go:
https://drive.google.com/file/d/0B2dmoW2LGhuSNmFzR3dDZGQ1SUU/view?usp=drivesdk
Sent from space

Thank you! With the P in the update, I thought it might be for Marshmallow, but the update is so small that it looks unlikely. Did anyone try installing this yet?

onree said:
Thank you! With the P in the update, I thought it might be for Marshmallow, but the update is so small that it looks unlikely. Did anyone try installing this yet?
Click to expand...
Click to collapse
P=2016
I=October
2=build #2 of October
No, I'm kinda picking apart the update zip right now. Android for Work (which only requires 5.0+ so that doesn't tell us anything either) is the biggest change I see. There isn't a build.prop in the update.zip that downloaded to my phone this morning, which is weird... so I can't see what Android version it is yet, I'm hoping for at least 5.1.1 but it's doubtful. There's a lot of security and Knox stuff added which makes me think it's mainly a security update like the last 2 updates.

It's 5.0.1

Has anyone applied this update yet? I never received it on my phone and I'm wondering if i should download it from here and install it. I have the L720T by the way.

triiuzii said:
Has anyone applied this update yet? I never received it on my phone and I'm wondering if i should download it from here and install it. I have the L720T by the way.
Click to expand...
Click to collapse
As far as I have seen no update has been released for the L720T, no DO NOT FLASH THIS

bilgerryan said:
As far as I have seen no update has been released for the L720T, no DO NOT FLASH THIS
Click to expand...
Click to collapse
Ok, I won't flash it. Thanks.

Hey guys ,does any one know how to get the Data toggle for the SPH L720 ? I hate using the widgets to turn on my Data.

taoufiqlak said:
Hey guys ,does any one know how to get the Data toggle for the SPH L720 ? I hate using the widgets to turn on my Data.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=60695222

bilgerryan said:
http://forum.xda-developers.com/showthread.php?p=60695222
Click to expand...
Click to collapse
Thanks a lot man you are great

sph-l720 (not T) worked fine...
in order shown i:
-installed pi2 through kies3 on win 8.1 after backing up...
-using odin that came with latest cf-autoroot i re-rooted...
-using the same odin re-installed philz touch (older md5 version) and booted into it...
-installed latest (no longer in development) philz touch advanced version from zip file i have on sdcard1...
-rebooted into philz and installed very old emoji font support for samsung from a zip (dangerous) using philz...
-ran triangle away (very dangerous) and rebooted...
note that i had a backup on sdcard1 from philz made prior to any of this. also did one in kies3...
good luck!!!

bilgerryan said:
It's 5.0.1
Click to expand...
Click to collapse
Im surprised it still even gets updates lol

I was on stock rooted OK3, flashed back to stock, then updated using the update.zip, then ran CF-autoroot. I did hard reset after that because I wanted to start over anyway. Everything working fine.

New OTA Update 2.21.401.1

Did anyone get this update?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yep, here as well. I have a unlocked M8s. Update is small, contains only system improvements....
*Update*
Doesn't update the security level, is still @ 1 oct. 2016. Not sure which improvements have been made...

I haven't received the update yet. Probably because it's Vodafone branded

bgoedhart said:
I haven't received the update yet. Probably because it's Vodafone branded
Click to expand...
Click to collapse
I don't think so because I installed this rom(0PKVIM[email protected]60201_20.05_018_F_release_479349_combined_signed.zip). This update appeared after installation it.

I mean my phone is Vodafone branded. I'm on version 2.11.161.1.

I received the update today. However, yours appears to be much larger in size. Mine was just about 24MB.

bgoedhart said:
I mean my phone is Vodafone branded. I'm on version 2.11.161.1.
Click to expand...
Click to collapse
Ah! Ok, it is my fault.

Felyks said:
I received the update today. However, yours appears to be much larger in size. Mine was just about 24MB.
Click to expand...
Click to collapse

I received an update few days ago, but 24Mb also. And i'm in France too.

There is an update notification. 2.21.401 (previously I'm at 2.20.401).
I have downloaded it. Does anyone know where it is stored now after download ( I selected install later)
The phone biggest problem it has been getting hot to touch as it is playing youtube videos. It then occasionally gives an overheat warning. i am hoping this will be fixed after update.

Ayziio said:
I received an update few days ago, but 24Mb also. And i'm in France too.
Click to expand...
Click to collapse
I don't know why mine was 638Mb. It is strange.

I found my update a fota inside the htc sense region of my /data/data directory
It was about 24-26 MB.

What does the update do? I tried unzipping but it cant be unzipped. I didn't try everything . I really nervous am made by ota updates.
I want to know everything it will be changing. I operate by "if it ain't broke don't fix it" adage... and it ain't really broke in any way.
I haven't tried everything yet. I probably wont install it since the phone is working well. What if it screws my phone so I can't boot twrp or something.

kruc Ire said:
What does the update do? I tried unzipping but it cant be unzipped. I didn't try everything . I really nervous am made by ota updates.
I want to know everything it will be changing. I operate by "if it ain't broke don't fix it" adage... and it ain't really broke in any way.
I haven't tried everything yet. I probably wont install it since the phone is working well. What if it screws my phone so I can't boot twrp or something.
Click to expand...
Click to collapse
Not sure. I installed the update, didn't notice any change. Probably a good idea to install though...

Maybe if they were prepping our phone for a nougat upgrade I would. Anyone heard anything like that?

kruc Ire said:
Maybe if they were prepping our phone for a nougat upgrade I would. Anyone heard anything like that?
Click to expand...
Click to collapse
Don't get your hopes too high up, HTC didn't announce Nougat for the M8 nor the M8s....

As far as I know they only managed to release Nougat for the M9. Ten still doesn't have a legit Nougat in my family. We have a Ten and still no Nougat OTA.

I am corrected today. I just found out the ten does have the Nougat now.

I don't wait anything from HTC anymore. This phone will be last HTC for me.

To clarify, is this update for M8s or the M8? Because you are posting in M8s forum.