Related
Afternoon all, just wondering if anyone could help on a quick problem - my Nexus 6 keeps prompting me to update but when I do it hangs after the reboot with what I assume is the recovery error message (red exclamation mark). I'm already on build LMY48I on 5.1.1, which I was under the impression was the September 2015 security patch. I'm fully stock, not rooted or any other mods. I am abroad currently, which I wouldn't imagine has any effect?
Could anyone offer any help on this or steer me in the right direction for further information.
Thanks in advance.
Latest build is LMY48M. OTA may fail because of corrupted download.
You may wanna update your signature.
Yeah, OK, thanks, not been around these parts for awhile.
Would you mind letting me know how I would go about getting a fresh download of the update using OTA?
Thank for the reply.
Still booting normally? Bootloader locked?
When you get to error with Android logo with tummy open press Power then VolumeUp this will show more details about the error. Write everything down.
Hi, sorry for for delay in replying. Bootloader is locked, boots normally when not trying to apply this update.
Next time I try to update I'll log the error messages and revert back here, thanks for your help.
gardy09 said:
Hi, sorry for for delay in replying. Bootloader is locked, boots normally when not trying to apply this update.
Next time I try to update I'll log the error messages and revert back here, thanks for your help.
Click to expand...
Click to collapse
If you're overseas you may be getting an incorrect build, not quite sure how that works
Strangely I thought it might have something towards do with being in Spain. I'll factory reset when I get home and see if that works.
Me too
Sorry to bump an old thread but the OP describes the EXACT problem I am having. Repeat system update update notifications. It says its downloaded but it goes to error when apply the update. I first got the notification in Qatar. I am unlocked and rootwd nexus 6 but running stock 5.1.1.
How can I get rid of the incorrect build?
soccerguy243 said:
Sorry to bump an old thread but the OP describes the EXACT problem I am having. Repeat system update update notifications. It says its downloaded but it goes to error when apply the update. I first got the notification in Qatar. I am unlocked and rootwd nexus 6 but running stock 5.1.1.
How can I get rid of the incorrect build?
Click to expand...
Click to collapse
two way.. update to the latest, or long press the update then oresspress the white circle that appears in the right, then press disable notifications. but i thing updating to the is most important.
simms22 said:
two way.. update to the latest, or long press the update then oresspress the white circle that appears in the right, then press disable notifications. but i thing updating to the is most important.
Click to expand...
Click to collapse
When I go to settings, about phone, it shows I àm running 5.1.1 which is the latest version. But ht I still get the notification.
soccerguy243 said:
When I go to settings, about phone, it shows I àm running 5.1.1 which is the latest version. But ht I still get the notification.
Click to expand...
Click to collapse
There have been serveral updates with version number 5.1.1. What you need to check is the build number.
The latest are LMY48M (most people), LYZ28K (T-Mobile) or LVY48F (Project Fi).
---------- Post added at 10:03 ---------- Previous post was at 10:01 ----------
soccerguy243 said:
Sorry to bump an old thread but the OP describes the EXACT problem I am having. Repeat system update update notifications. It says its downloaded but it goes to error when apply the update. I first got the notification in Qatar. I am unlocked and rootwd nexus 6 but running stock 5.1.1.
How can I get rid of the incorrect build?
Click to expand...
Click to collapse
Ah, just re-read your first post. You can't take an OTA-update, since you're rooted. You need to flash a factory image (or relevant parts of one).
Check the stickies for instructions...
Didgeridoohan said:
There have been serveral updates with version number 5.1.1. What you need to check is the build number.
The latest are LMY48M (most people), LYZ28K (T-Mobile) or LVY48F (Project Fi).
---------- Post added at 10:03 ---------- Previous post was at 10:01 ----------
Ah, just re-read your first post. You can't take an OTA-update, since you're rooted. You need to flash a factory image (or relevant parts of one).
Check the stickies for instructions...
Click to expand...
Click to collapse
I have 47Z installed. I'll use nexus root toolkit to get the latest. Thanks SO MUCH!
Evening all and sorry for delayed response. I've called Google today and they were no help whatsoever, the person I spoke to didn't even know the difference between Android versions and build numbers, I had to explain it to her. Is there any way of checking or finding out what build is being pushed to my phone? Also, will I be able to update to 6.0 when it arrives if I haven't sorted this problem ie how to clear this potentially corrupted download? Am I correct in thinking that I need to be on LMY48M and not on LMY48I - thanks in advance.
gardy09 said:
Evening all and sorry for delayed response. I've called Google today and they were no help whatsoever, the person I spoke to didn't even know the difference between Android versions and build numbers, I had to explain it to her. Is there any way of checking or finding out what build is being pushed to my phone? Also, will I be able to update to 6.0 when it arrives if I haven't sorted this problem ie how to clear this potentially corrupted download? Am I correct in thinking that I need to be on LMY48M and not on LMY48I - thanks in advance.
Click to expand...
Click to collapse
Have you ever found out more details about update error? Press Power then Volume Up on error screen.
Will do it now, hang on...
This is the error message I get...
gardy09 said:
This is the error message I get...
Click to expand...
Click to collapse
At this point you have few choices.
File bug report and wait for resolution.
Try Factory Reset. Using PC try fastboot format userdata and format cache.
Unlock bootloader and flash factory image. Might just well go straight to 6.0 MRA58K. You will loose all your private data either way. Backup all your private stuff.
So have downloaded the MRA58K build of 6.0, attempting to sideload via ADB, device seen, reboot bootloader, into recovery, use ./adb sideload 'file.zip' but getting a footer and signature error. Any help would be greatly appreciated.
And how the hell does one update a 5 year old signature on XDA!?
Edit - so just reading around and there are two issues I've noted 1) that I'm going from LMY48I straight to MRA58K and missing out LMY48M or 2) that the factory images can't be sideloaded, they need to use the fastboot scripts. Any ideas what could be causing my errors?
gardy09 said:
So have downloaded the MRA58K build of 6.0, attempting to sideload via ADB, device seen, reboot bootloader, into recovery, use ./adb sideload 'file.zip' but getting a footer and signature error. Any help would be greatly appreciated.
And how the hell does one update a 5 year old signature on XDA!?
Edit - so just reading around and there are two issues I've noted 1) that I'm going from LMY48I straight to MRA58K and missing out LMY48M or 2) that the factory images can't be sideloaded, they need to use the fastboot scripts. Any ideas what could be causing my errors?
Click to expand...
Click to collapse
Here is guide how to flash factory images http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
gardy09 said:
So have downloaded the MRA58K build of 6.0, attempting to sideload via ADB, device seen, reboot bootloader, into recovery, use ./adb sideload 'file.zip' but getting a footer and signature error. Any help would be greatly appreciated.
And how the hell does one update a 5 year old signature on XDA!?
Edit - so just reading around and there are two issues I've noted 1) that I'm going from LMY48I straight to MRA58K and missing out LMY48M or 2) that the factory images can't be sideloaded, they need to use the fastboot scripts. Any ideas what could be causing my errors?
Click to expand...
Click to collapse
You'll have to find the update from ur current version to the new version. You'll probably have to get LMY48M, didn't see one from I
Sent from my Nexus 6 using Tapatalk
Hi, I have an unlocked Nexus 6 bought direct from Google. Somehow it became the AT&T version of 5.1.1 (LMY48W). This means that there is currently no OTA upgrade to Android 6.0 Marshmallow for LMY48W.
However, as there is an upgrade to 6.0 from LMY48T, it is possible to either:
Edit the build.prop to trick the update –*and would this cause any problems?
Change my Nexus 6 to LMY48T some other official way?
1 - I wouldn't.
2 - Yes, by flashing a factory image, but in that case you might as well just move straight to Marshmallow. If you don't want to wipe your phone, just skip flashing the userdata image.
(There's a bunch of guides for this, search or check the stickies.)
1. Even if it did download an update, it wouldn't do anything but cause problems for you as the file verification would fail.
2. Why don't you just download the official factory image for Marshmallow and flash it via fastboot?
imnuts said:
1. Even if it did download an update, it wouldn't do anything but cause problems for you as the file verification would fail.
2. Why don't you just download the official factory image for Marshmallow and flash it via fastboot?
Click to expand...
Click to collapse
im on cm12.1 can i just flash the factory image using wugs toolkit?
Thanks, flashing all except userdata.img worked.
Thanks!
"Recordar es vivir"
reyscott1968 said:
im on cm12.1 can i just flash the factory image using wugs toolkit?
Click to expand...
Click to collapse
It doesn't take much to do it manually. Learn to do things without a toolkit and you'll be much better off.
Sent from my Nexus 6
imnuts said:
It doesn't take much to do it manually. Learn to do things without a toolkit and you'll be much better off.
Sent from my Nexus 6
Click to expand...
Click to collapse
adb and fastfoot will become your bestfriends:good:
Good Morning Everyone! I decided to open this discussion hoping someone could help me solve or at least understand the problem I have been having on my Nexus 6 with Android N Preview. So, I have the Nexus 6 since April and I got it from a friend who sold it to me. At that moment the phone was already enrolled in the Beta Program, and was running one of the first previews. But here came the problem. In fact I wanted to unenroll the phone but when I enter the Beta Program page, my Nexus does not appear as eligible device nor I can unenroll it from there. I looked at Device Manager and it shows my Nexus 6, but I actually could not do anything to unenroll it. I tried flashing a Marshmallow build with NRT but as soon as I turn on my phone, an annoying notification shows up, saying I can update to the N preview. So, how can I try to uneroll my Nexus 6? My friend says he is not able to do it for me, cause he doesn't see the device on his account anymore. What do you suggest me to do?
Thanks in advance, guys!
Here is an idea.
When NRT is used Twrp-recovery is installed.
Copy a lite stock rom in 'zip-format' to internal memory. Or download it.
http://forum.xda-developers.com/showthread.php?p=59561445/
Reboot in recovery and wipe the system partition and caches.
Still in Twrp-recovery - Flash the 'zip' with lite stock rom.
Reboot.
NLBeev said:
Here is an idea.
When NRT is used Twrp-recovery is installed.
Copy a lite stock rom in 'zip-format' to internal memory. Or download it.
http://forum.xda-developers.com/showthread.php?p=59561445/
Reboot in recovery and wipe the system partition and caches.
Still in Twrp-recovery - Flash the 'zip' with lite stock rom.
Reboot.
Click to expand...
Click to collapse
Thanks for your tips, man! I have some questions about: with this procedure I'm going to install a custom ROM, but if I wanted to go back to latest official MM build and flash it with NRT, will be the problem solved in the same way in your opinion or will I get the notification about the preview again? What if I try to access with another different account after that in your opinion?
Ste293919 said:
.... if I wanted to go back to latest official MM build and flash it with NRT, will be the problem solved.....
Click to expand...
Click to collapse
You need to delete the current account and do a factory reset.
For going back to stock there is a tutorial,
http://forum.xda-developers.com/showthread.php?p=57063390/
So I managed to go back to android MM after enteting a new account and unenrolling my Nexus 6 from Beta Program. Now everything seemed fine but then after I updated back with the OTA I received, I noticed my device has still July Security patch. I thought Google would have sent me September ones, so I tried to check manually and waited a whole day, but nothing happened. Coukd it be a problem related to bad installation in your opinion? Do you suggest me to restore September build through NRT?
Thanks for all your help man, I owe you and thanks you for your time!
Hi, im new in this forum, i write this because my english is bad and i dont understand if i can root my blu with the v7.4.2 version. If os possible please send me the tutorial to make root on my phone.
Thanks a lot and excuse my bad english
I have the prime version 7.4.2 and I followed the Blu R1 HD v6.6 Dirtycowed F.U. Amazon Root and unlock guide. It worked perfectly fine on mine. Scroll down to post #5 and go to mrmazaks GitHub link and he has everything you need there
Weasel0 said:
I have the prime version 7.4.2 and I followed the Blu R1 HD v6.6 Dirtycowed F.U. Amazon Root and unlock guide. It worked perfectly fine on mine. Scroll down to post #5 and go to mrmazaks GitHub link and he has everything you need there
Click to expand...
Click to collapse
I'll do It.
Thank you
Your welcome and let us know how it works out
Weasel0 said:
I have the prime version 7.4.2 and I followed the Blu R1 HD v6.6 Dirtycowed F.U. Amazon Root and unlock guide. It worked perfectly fine on mine. Scroll down to post #5 and go to mrmazaks GitHub link and he has everything you need there
Click to expand...
Click to collapse
He has everything but instructions. How can I apply DIrtycow to my Blu r1 hd V7.4.2 Does anyone have instructions on how to do this?
The instructions are there in the readme file. https://github.com/mrmazakblu/DirtyCow-R1_HD is the webpage. If you go to the desktop version of the page you can click the "clone or download" button to download the zip file. If I recall correctly I just downloaded that, adb, fastboot and got the computer to recognize the phone and ran the one-click-root file. I was having trouble getting my laptop to recognize the phone and some other issues so I don't remember exactly what steps I did. Hope I've been some kind of help and remember, I'm not responsible for anything you do to your own property
Weasel0 said:
The instructions are there in the readme file. https://github.com/mrmazakblu/DirtyCow-R1_HD is the webpage. If you go to the desktop version of the page you can click the "clone or download" button to download the zip file. If I recall correctly I just downloaded that, adb, fastboot and got the computer to recognize the phone and ran the one-click-root file. I was having trouble getting my laptop to recognize the phone and some other issues so I don't remember exactly what steps I did. Hope I've been some kind of help and remember, I'm not responsible for anything you do to your own property
Click to expand...
Click to collapse
Get root with that guide?
yepi15 said:
Get root with that guide?
Click to expand...
Click to collapse
Ok I got it now. The files go on the pc. Duh!
[email protected] said:
Ok I got it now. The files go on the pc. Duh!
Click to expand...
Click to collapse
Yes can obtained root thx, swap not active in reboot and active a kernel auditor.
yepi15 said:
Yes can obtained root thx, swap not active in reboot and active a kernel auditor.
Click to expand...
Click to collapse
I was able to run the one click root script from the site but all it got me was a slick, shiny version of V7.42. minus all of my apps of course. I ran the one click script twice to be sure both times all I got was a new version of 7.4.2. No root or anything else. Mine is the 8 meg version I wonder if that makes a difference?
[email protected] said:
I was able to run the one click root script from the site but all it got me was a slick, shiny version of V7.42. minus all of my apps of course. I ran the one click script twice to be sure both times all I got was a new version of 7.4.2. No root or anything else. Mine is the 8 meg version I wonder if that makes a difference?
Click to expand...
Click to collapse
You should ask the one who gave the guide.
yepi15 said:
You should ask the one who gave the guide.
Click to expand...
Click to collapse
have you tried running the code line for line in CMD?
L4nd0 said:
have you tried running the code line for line in CMD?
Click to expand...
Click to collapse
Yes
[email protected] said:
I was able to run the one click root script from the site but all it got me was a slick, shiny version of V7.42. minus all of my apps of course. I ran the one click script twice to be sure both times all I got was a new version of 7.4.2. No root or anything else. Mine is the 8 meg version I wonder if that makes a difference?
Click to expand...
Click to collapse
Not sure if you got any further but I think you have to download SuperSU, copy it to SD card and install it from TWRP recovery
Hi, is my first time in android (moved from iOS) and buy this to test and learn. I have this version 7.4.2 and download (cloned) the repo from github? can anyone say to me the steps please? I'm so newbie and dont know how hard could be to root the phone
therevod said:
Hi, is my first time in android (moved from iOS) and buy this to test and learn. I have this version 7.4.2 and download (cloned) the repo from github? can anyone say to me the steps please? I'm so newbie and dont know how hard could be to root the phone
Click to expand...
Click to collapse
(Must have adb and fastboot setup and have phone drivers for either OS)
On Windows?
Unzip the downloaded file to a new folder, open new
folder and click on "dirty-cow-log.bat".
Do the steps in order (1-3-3-4) to be unlocked, then
Step (5) to get to second page where step (1) is root
The rest is optional
On Linux?
Unzip downloaded file to new folder folder .
Open folder. Then open R1-Linux-tool-v2 folder
Open terminal from that folder and type
" . R1-HD-TOOL.sh "
Same order of steps (1,2,3,4) step (5) for extra
Steps (1 on second menu) for superSU root.
Second menu steps (2,3,4,5,6,7,8) are optional.
Also there is now new thread for the "tool"
https://forum.xda-developers.com/r1-hd/how-to/unlock-tool-t3561333
mrmazak said:
(Must have adb and fastboot setup and have phone drivers for either OS)
On Windows?
Unzip the downloaded file to a new folder, open new
folder and click on "dirty-cow-log.bat".
Do the steps in order (1-3-3-4) to be unlocked, then
Step (5) to get to second page where step (1) is root
The rest is optional
Also there is now new thread for the "tool"
https://forum.xda-developers.com/r1-hd/how-to/unlock-tool-t3561333
Click to expand...
Click to collapse
Thanks, http://www.teamandroid.com/2016/06/15/install-fastboot-adb-google-usb-drivers-windows/ this guide is still valid to install the adb and fastboot on Windows 10?
therevod said:
Thanks, http://www.teamandroid.com/2016/06/15/install-fastboot-adb-google-usb-drivers-windows/ this guide is still valid to install the adb and fastboot on Windows 10?
Click to expand...
Click to collapse
think it is. looks similar if not same as i have used before
at least the 15 second installer screenshot.
dont remember installing java sdk, at that time.
same tool but from developers thread
https://forum.xda-developers.com/showthread.php?t=2588979
I was in the same boat as yours but i was able to figure out the issue with the script and now I have a r1 hd with twrp installed and rooted 7.4.2 purchased on 5/1/2017. Let me know if you need any guidance or help
s.yogamurthy said:
I was in the same boat as yours but i was able to figure out the issue with the script and now I have a r1 hd with twrp installed and rooted 7.4.2 purchased on 5/1/2017. Let me know if you need any guidance or help
Click to expand...
Click to collapse
What carrier do u use & did u get latest OTA with T-Mobile band 12 VOLTE & extended range fix patch.
A lot of users are saying they got an update with August security patches and other improvements.
But now it's almost the end of August and I haven't have got any update after the July update.
Build number: LLD-AL10 8.0.0.170(C675)
Varient:Indian
Any help?
1.) Is your boot-loader unlocked ?
2.) Do you have a Custom Kernel or Recovery Installed?
3.) Are you Rooted?
If the answer is yes to any of them then thats why your not getting any OTA's, If Yes is on 1.) then simply issue the fastboot command to relock the device "fastboot oem relock <bootloader-code>" If its yes to 2.) / 3.) Then your going to need to flash the phone back to stock before then relocking the bootloader.
hacktrix2006 said:
1.) Is your boot-loader unlocked ?
2.) Do you have a Custom Kernel or Recovery Installed?
3.) Are you Rooted?
If the answer is yes to any of them then thats why your not getting any OTA's, If Yes is on 1.) then simply issue the fastboot command to relock the device "fastboot oem relock <bootloader-code>" If its yes to 2.) / 3.) Then your going to need to flash the phone back to stock before then relocking the bootloader.
Click to expand...
Click to collapse
1) Was unlocked
2)Had TWRP
3)Was rooted
I switched back to stock because of constant bugs especially the camera(what's the use of keeping a camera oriented phone in the pocket if it's camera is of no use?)
I'd used HuRupdater to flash the firmware. Now bootloader's relocked and everything's working fine except updates.
I think I flashed the wrong firmware maybe ( I forgot the build number so had to guess. I was sure I had an LLD-AL10 and that there was a C675 and 8.0 in the build number. I matched the changelog with that of the last update I got and then I kinda found out that everything matched to LLD-AL10 8.0.0.170(C675) )
Would one stop getting updates if they installed wrong firmware?
Everything works fine except updates.( And the bootloader 'relocked' status in fastboot).
Should I just flash the August update with HuRupdater( that's gonna be a lot of hassle as I have to unlock bootloader and do all those stuff) or can I update via any other method?
Right you can use Firmware finder on your phone which is a good start.
So using FF select then next version up from your current and only select a OTA-MF, then make sure its for your phone by clicking check firmware access.
If its for your phone then simply use the in-app proxie and connect to a wifi point. Once you have done this edit that Wifi via Settings and change the Proxie to Localhost port 8080. Then go the System and Update.
Now it should download the small version OTA to your phone and reboot to try to install it, it it goes thought and installs without error then great, if it errors out when you boot back into android it will offer the Full OTA without using FF to which will then flash proper without losing data then see if OTA's work after that.
hacktrix2006 said:
Right you can use Firmware finder on your phone which is a good start.
So using FF select then next version up from your current and only select a OTA-MF, then make sure its for your phone by clicking check firmware access.
If its for your phone then simply use the in-app proxie and connect to a wifi point. Once you have done this edit that Wifi via Settings and change the Proxie to Localhost port 8080. Then go the System and Update.
Now it should download the small version OTA to your phone and reboot to try to install it, it it goes thought and installs without error then great, if it errors out when you boot back into android it will offer the Full OTA without using FF to which will then flash proper without losing data then see if OTA's work after that.
Click to expand...
Click to collapse
I checked and this is what happened.
FF detected my phone as LLD-AL10C675
The latest update that's is approved is
LLD-AL10 8.0.0.181(C675CUSTC675D1)
It is B181
But that update is from June. So I searched for LLD-AL10 and pressed ok , so that it shows all firmwares for lld al10.
And I think I found the one I have currently installed(build number and changelog matches) LLD-AL10 8.0.0.170(C675CUSTC675D1). It is from 11/7/2018. Everything above says either firmware not approved or has a wierd term cn in the available models section.
This is something I quite don't understand. When I check firmware access it says lld-al10:all-cn.
I think cn stands for China.( Uploading screenshot)
Would it be safe for me to install the update?
Also is it necessary to download the update just above the one I have installed now or can I skip to the latest one?
Sorry if that's a lot of questions.
I'm in a tight corner now.
I can't get any updates using the dns method or the in app proxy method.
This sucks as I was able to get an update using the dns method 3 weeks back. I didn't install it. I checked for updates, it showed updates, then I stopped dns and things went back to how it was(no updates ?). Today I tried again and nothing happened.
Crazy phone?
Are you selecting the smaller updates as it will not work with full ota's any more.
Sent from my LLD-L31 using Tapatalk
hacktrix2006 said:
Are you selecting the smaller updates as it will not work with full ota's any more.
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
I tried it with both the small one and full ota update
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
hacktrix2006 said:
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
Yup I'm sure I did those right. I tried both the VPN and proxy methods. As I told VPN used to work.
Anyways I'm gonna wait and try it a few more times. Then I might use HuRupdater.
Thanks for your replies man ?
hacktrix2006 said:
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
OMFG bro I fixed it.
You see Huawei had rolled out an update for the 'system update' app through playstore. I had updated it. And after I uninstalled the update for it, things are starting to work again ?.
Only 3 questions remains.
1) Can I install firmware that is not approved?
2)Is it necessary to install the update just above the version I
have currently installed?
3)Is it okay if FF says it's approved but has the part LLD-AL10-
all-cn:all ?
Does the cn part matter ?
Would be very grateful if you could help
1) Yes
2) No
3) CN= China. Personally I wouldn't, plus I don't speak Chinese , why would you want to ? I also like having full access to Google playstore.
On an aside, I'm beginning to get the impression you won't be happy till you really brick your phone . :laugh::laugh:
hacktrix2006 said:
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
Sparkrite said:
1) Yes
2) No
3) CN= China. Personally I wouldn't, plus I don't speak Chinese , why would you want to ? I also like having full access to Google playstore.
On an aside, I'm beginning to get the impression you won't be happy till you really brick your phone . :laugh::laugh:
Click to expand...
Click to collapse
?That's kinda my thing (I desperately break stuff then fix them)?
Thans ?
hacktrix2006 said:
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
I have tried this procedure more than three times and it just doesn't work. I have the same model version C432 and the same firmware B133. I even downloaded the full Ota file and tried through SD card update ("#" #2846579#"#"), still nothing. When I connect it to Hisuite it says that I have the last official version. Any suggestions?
rostropol said:
I have tried this procedure more than three times and it just doesn't work. I have the same model version C432 and the same firmware B133. I even downloaded the full Ota file and tried through SD card update ("#" #2846579#"#"), still nothing. When I connect it to Hisuite it says that I have the last official version. Any suggestions?
Click to expand...
Click to collapse
I used the FF app on mobile then used in app proxie connected to a wifi point and edited the connection to enable proxie on localhost port 8080. I also only downloaded only the small OTA, however it will fail to install then once you rebooted back into android go system update and then press the 3 dots and go for Full Download that will fix it.
Just a point you may have the same Firmware even the same model but they are not made equal.
Also check Google play store app for Huawei System Update it should look like the picture that's attached then click uninstall and reinstall install the app too before starting as reinstalling that app can help alot.
hacktrix2006 said:
I used the FF app on mobile then used in app proxie connected to a wifi point and edited the connection to enable proxie on localhost port 8080. I also only downloaded only the small OTA, however it will fail to install then once you rebooted back into android go system update and then press the 3 dots and go for Full Download that will fix it.
Just a point you may have the same Firmware even the same model but they are not made equal.
Also check Google play store app for Huawei System Update it should look like the picture that's attached then click uninstall and reinstall install the app too before starting as reinstalling that app can help alot.
Click to expand...
Click to collapse
Many thanks for your prompt reply.
So Ive already done all this because it may be related but no luck.Last time I used FF was to get the B133 which already didnt work on the 7th August,I then uninstalled the FF app,stopped the proxy localhost etc. and right after that I did the update check through system update and the B133 FULL was offered to download,so the B133 was made properly through system update right after all the procedure with the FF.
rostropol said:
I have tried this procedure more than three times and it just doesn't work. I have the same model version C432 and the same firmware B133. I even downloaded the full Ota file and tried through SD card update ("#" #2846579#"#"), still nothing. When I connect it to Hisuite it says that I have the last official version. Any suggestions?
Click to expand...
Click to collapse
Try uninstalling the update for the system update app then use the VPN or proxy method.
Maybe the update just hasn't reached you like me.
Fredin_ said:
Try uninstalling the update for the system update app then use the VPN or proxy method.
Maybe the update just hasn't reached you like me.
Click to expand...
Click to collapse
"Maybe the update just hasn't reached you like me"...I will keep that and just have patience. Ive tried everything but there is no update yet....
Many thanks once again for your reply
rostropol said:
I have tried this procedure more than three times and it just doesn't work. I have the same model version C432 and the same firmware B133. I even downloaded the full Ota file and tried through SD card update ("#" #2846579#"#"), still nothing. When I connect it to Hisuite it says that I have the last official version. Any suggestions?
Click to expand...
Click to collapse
rostropol said:
"Maybe the update just hasn't reached you like me"...I will keep that and just have patience. Ive tried everything but there is no update yet....
Many thanks once again for your reply
Click to expand...
Click to collapse
?.