Related
Hi guys, i'm a big fan of this site, and I'm glad Im part of it since i can use you guy's great roms and tricks. But I have a big problem with my tilt now and I wanted to see if some of you could help me with it. I bought my tilt from a friend with a broken screen, i bought and replaced the screen myself, but after a day or two, the backlight for the screen wouldn't work. The only working solution i found was by squeezing the phone and pressing on the lower left corner above the green call button so the screen wouldnt turn on while i pressed it. I decided to open it, and i put a piece of paper above the connection of the screen and the flex, and this worked for a while. But ever since, i always have to keep putting in new pieces paper or plastic to keep pressure on the connection for the lcd, i was wondering if you guys would happen to know what the possible cause is. And it is hard because when i put those pieces of papers, the call button on the front has so much pressure that it is permanently pressed. I dont know what to do now, i don't know if i should just give up trying to fix my tilt or to just buy a new one. Hope someone can help me thank you.
damn...41 views and no replies....im guessing i should start looking for a new phone
A thorough clean needed
How about carefully cleaning the flex and connector using contact cleaner? If a connection surface isn't perfectly clean, often pressure is needed to push the terminals through the tiny film of grease (eg from fingerprints).
I'd say you bought a bad quality LCD that has a wacky contact inside the module...
im going to buy contact cleaner..if that doesnt work then it's probably a bad lcd like u guys said even though i paid 100 dollars for it ...thank you very much for the replies
ReYCangri said:
Hi guys, i'm a big fan of this site, and I'm glad Im part of it since i can use you guy's great roms and tricks. But I have a big problem with my tilt now and I wanted to see if some of you could help me with it. I bought my tilt from a friend with a broken screen, i bought and replaced the screen myself, but after a day or two, the backlight for the screen wouldn't work. The only working solution i found was by squeezing the phone and pressing on the lower left corner above the green call button so the screen wouldnt turn on while i pressed it. I decided to open it, and i put a piece of paper above the connection of the screen and the flex, and this worked for a while. But ever since, i always have to keep putting in new pieces paper or plastic to keep pressure on the connection for the lcd, i was wondering if you guys would happen to know what the possible cause is. And it is hard because when i put those pieces of papers, the call button on the front has so much pressure that it is permanently pressed. I dont know what to do now, i don't know if i should just give up trying to fix my tilt or to just buy a new one. Hope someone can help me thank you.
Click to expand...
Click to collapse
While replacing the screen you might've shorted something which would then only allow certain function by appling abnormal pressure.
I have searched for solutions for the past 2 days but cant find one, if i missed it or this post is redundant , i apologize in advance.
Now my tilt is driving me crazy. It started last week when The touch screen wasnt working, but i fixed it by doing a couple of soft resets. then all the sudden, everytime i slide my keyboard out, the touch screen would stop responding. this went on for a day, then yesterday, when i tired to use the keyboard, the screen went blank, like the light died or something. but when i put it back on portrait, the screen would light up again.
A few moments later, the touch was responding, tried to use the keypad then the screen went blank..tried soft resets about 5 times and uninstalled all recent added programs (skyfire) ..finally the screen was working but the touch still wasnt working.
So this morning, i had the bright idea to do a hard reset....dumbest idea ever cos now its stuck at the screen where i have to "tap the screen to set up your wm device" and guess what..the touch screen isnt responding
plz i really need help with this. all so , i have a broken tilt.., well lcd screen is cracked...can i try to dismantle both tilts and replace the screens?
Ok, i used Code Factory's Remote screen alignment to bypass the alignment, but if i cant use the touch screen or the keyboard, the phone is pretty much useless for sending any information or making calls..is there a way to fix this?
I have had this same issue with my tilt. I could use the scroller on the left side of the unit to navigate but no touch screen. Both times that this has happened to me I removed the screen protector that I had on and restored a backup that I had on my storage card (I run a backup weekly). This has always fixed my issue. You could try another hard reset, not sure if that will help but do you get any lights on the keyboard when you slide it open? Is your tilt less than a year old because there is a manufacturer's warranty too.
Jim
when i slide the keyboard, i do get lights on the keyboard but not on the screen...it just goes dead..but when i slide it back in, the screen comes to life.
I cant do another hard reset cos i have to input the "1,2,3,4" code.
Also , the phone just got out of the 1yr warranty this month...awesome
I want to buy a replacement screen with a new digitizer but i need to be sure that is the problem.. ive searched for this keyboard problem but still have no answers
Now I'm having the same issue, touch not responding. I first noticed it about two days ago, when I slide the keyboard out, I could type just fine, but when I went to send the message the touch screen wouldnt work, so I'd close the keyboard and it would work. well yesterday it stopped working all together, so i used my d-pad and did a sprite restore and it started working again. But then On my way home i hit the lock button, and it stopped working after that, and I couldn't get it unlocked. I used the inner soft key to hit the first part of unlock, but then I couldnt ever figure which button to hit to get the on screen part of the unlock. So I had no choice but to do a hard reset, and just like highoct now I'm stuck on the stylus setup , and the touch still doesnt respond. does anybody esle have any suggestions ? Thanks in advance.
You can use the Code Factory's Remote screen alignment to bypass the alignment.
If the touch screen is the only problem, you can do one of two things if you are no longer under warranty;
1. Fix it yourself. You will have to buy a new Lcd screen with new digitizer at ebay and use this site http://www.pdacenter.ru/razborka/razbor_htc_kaiser/ to open up your tilt and replace it
2. Send it to a repair shop, I had two tilts and sent the one with the broken screen to www.missionrepair.com got it back in a within a week, $89.00 plus shipping
here is the link : http://www.missionrepair.com/Mission_Repair_AT_T_Cell_Phone_Repairs_and_Upgrades_s/321.htm
I still have the same tilt with the original problem..havent found a solution yet
Oh yeah, I did manage to do a hard reset again, but now the screen is just white. I can hear the sound of it booting up but it still has a white screen. I tired going to the Bootloader screen ( Camera and power at the same time)...still have the white screen. I believe its a hardware problem but i don't know what it is...any ideas?
Ok now I've done a hard flash, using the same HTC kaiser rom 6.1 and it fixes the problem for a little bit, until the first time I slide out the keyboard , then the screen stops working again, any suggestions ?
iPhone 3G Screen Repair...finally an affordable answer
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Chill0987 said:
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Click to expand...
Click to collapse
Sounds like a plug for your website to me... Last I checked this wasn't an iPhone site.
Chill0987 said:
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Click to expand...
Click to collapse
Does this look like an apple website? did i say i had an iphone? GET OUT OF HERE!!!
Ninety Four said:
Sounds like a plug for your website to me... Last I checked this wasn't an iPhone site.
Click to expand...
Click to collapse
And thats his only post, its spam. jerk him outta here
Tilt Touch Screen
highoct said:
You can use the Code Factory's Remote screen alignment to bypass the alignment.
If the touch screen is the only problem, you can do one of two things if you are no longer under warranty;
1. Fix it yourself. You will have to buy a new Lcd screen with new digitizer at ebay and use this site http://www.pdacenter.ru/razborka/razbor_htc_kaiser/ to open up your tilt and replace it
2. Send it to a repair shop, I had two tilts and sent the one with the broken screen to www.missionrepair.com got it back in a within a week, $89.00 plus shipping
here is the link : http://www.missionrepair.com/Mission_Repair_AT_T_Cell_Phone_Repairs_and_Upgrades_s/321.htm
I still have the same tilt with the original problem..havent found a solution yet
Click to expand...
Click to collapse
I know this thread is a bit old but was searching d forum for possible solutions cos yesterday i developed the same exact problem on my kaiser for no apparent reason!..flashing it hasnt helped and now im stuck on the wm setup screen..when u say u still have the same tilt with the original problem do you mean that the repair was unsuccessful? have you tried reparing it yourself? Thanks
I just started to have the same problem, it started out with the touch not responding (which a few soft resets fixed) and now the whole screen doesn't function unless i slid out the keyboard or if i jiggle it around and open it a couple of time i can usually find a spot that allows the screen to function with the keyboard closed. If i leave it in this position for about an hour the touch starts responding again, wtf. This is very inconvenient because as soon as you move the screen even just a little it will take me like half an hour to find the position which allows the phone to function.
grayfoxmg1 said:
I just started to have the same problem, it started out with the touch not responding (which a few soft resets fixed) and now the whole screen doesn't function unless i slid out the keyboard or if i jiggle it around and open it a couple of time i can usually find a spot that allows the screen to function with the keyboard closed. If i leave it in this position for about an hour the touch starts responding again, wtf. This is very inconvenient because as soon as you move the screen even just a little it will take me like half an hour to find the position which allows the phone to function.
Click to expand...
Click to collapse
same thing happened to me 3 days ago. touchscreen has just stopped responding.
it still worked when i slided my keyboard out, but only when it was out. then i realized it won't work at all (!) after soft reset. however, i could make it work again like that when i did the soft reset with the keyboard out. weird.
i tried searching, and decided to make a hard reset, flash a new rom, etc, etc., but no more touchscreen. at all. the device doesn't feel any touch in any case. nothing. i bypassed the beggining tap here with the storage card trick. (i've read it somewhere on the forum).
now i can only use my kaiser with the hw buttons, the keyboard, and that's it. no touch. really weird. please if anyone has any updates, solutions, anything, post. sniff sniff
mine doesn't have anything on the screen unless i slide it out, if i have it closed anymore, it just doesn't work at all.
try this:
ive just replaced my barely functioning lcd by myself, after living with it sometimes registered the stylus jumping around when i used the stylus. but before you change your lcd, here is a couple of tips for you guys:
1) try sliding out the keyboard. hold one finger in the middle of the keyboard and another on the back side of the phone, and squeeze hard, but careful. it might be that the flat cable between the screen part and the main part has loosened a bit from its socket, this could help it back in.
2) try sqeezing the hang up button hard. this might help the lcd-cable correctly back in its socket if it is loose.
im saying that this MIGHT help, if youre lucky. most likely you have to open the phone and squeeze the connectors back in yourself, or actually change the entire lcd. anyways, let me know what works for you!!
se1988 said:
ive just replaced my barely functioning lcd by myself, after living with it sometimes registered the stylus jumping around when i used the stylus. but before you change your lcd, here is a couple of tips for you guys:
1) try sliding out the keyboard. hold one finger in the middle of the keyboard and another on the back side of the phone, and squeeze hard, but careful. it might be that the flat cable between the screen part and the main part has loosened a bit from its socket, this could help it back in.
2) try sqeezing the hang up button hard. this might help the lcd-cable correctly back in its socket if it is loose.
im saying that this MIGHT help, if youre lucky. most likely you have to open the phone and squeeze the connectors back in yourself, or actually change the entire lcd. anyways, let me know what works for you!!
Click to expand...
Click to collapse
well, i tried both tips, but they didn't work. i'd like to say a big thanks anyway!
then i grabbed the kaiser service manual and took my device apart into pieces. i reconnected pretty much all the cables and stuff, but still no touchy. any further ideas?
you should try replacing the screen. im happy to say that this screen from this seller on eBay worked for me: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250539984183
look here for dissasembly video: http://www.fonlogix.tv/tiltlow.wmv
(to save it to desktop right click link and "save target as")
thanks for your help, i've just ordered a new screen! phew, i hope it's gonna work
Anyone else have a broken power button from regular day to day use?
Mine started acting up like 2 weeks ago. I noticed I had to press the power button more than once to turn the screen off/on. As the days went by the presses increased til it eventually gave out entirely this weekend as I landed in Vegas. I had to get someone to call my phone so I can turn the screen on and download "no lock" to enable trackball wake. I've also been paranoid about not letting the battery die since I won't be able to turn the phone on.
Calling Google/HTC tomorrow.
Btw, this is my second nexus one. First one had dead pixels. I had this second one maybe a month before the power button gave up!
Bummer.. Thought this might be a weak point in the design. Thanks for the heads up on "no lock". Will use that when @ home.
I've read about it happening a couple of times
Oh my god I'm having the same problem. Thought my N1's power button is now getting harder and harder to press to turn the screen on and off.
I was so angry about that, but after sometimes I figured out that the problem is not from the button (the hardware), it's because of the software. I dont know exactly from what apps which caused this, uninstalled some apps (especially apps for root only - which I thought are the main causes), but sometimes the problem occurs.
*Im using MCR r13.
And for your poor N1's button, I think it's broken because when facing with that trouble, you tried to press too hard... Bless your N1!
(Sorry for my bad english!)
Not A Software Problem...
The issue you are having is indeed a hardware problem. Well for the OP it is. I had a Nexus that was in the same situation. You can tell its not a hardware problem because if you remove the battery and put battery back in, the phone wont power up unless you press the power button like 8 to 10 times. That my friend is a hardware situation.
I created a small fix for mine. I should have created a youtube video of it lol. What I did was removed the back cover and batter and inbetween the Power Button and The Phone itself youll see like a small crack or very small gap of space between the phone and button. I stuck some small very small thin piece of paper in that gap. This will raise the buttun away from the phone just a lil bit. Put the battery back in and back cover back on. And noticed my button working 100% again.
So long story short the button itself starts to not make contact with the switch on the mother board or somethin. My bootloader was unlocked so i never got HTC involved. If your on cyan lates rom you can set it to wake via trackball under settings.
In the end, I ended up selling that N1 on craigslist for loot for a HD2 and HD2 was gargage (out dated OS and 65k color max display at LCD) and ended up selling the HD2 and got another nexus.
PS - I did have one of them argyle clear body cases on it that fit the N1 very snug and tightly, and wonder if that had somethin to do with power button goin out since it was rubbing against it repeatily.
same story happend to me, with a regular daily usage. It really bummers me, i unlocked the bootloader too, so i cant send it to HTC.
And I can't sell it in this condition too, sux!
Anyone with the same problem that sent it to HTC?
My wife had her's for about a week before having issues with the power button. Got a replacement and haven't had issues yet.
I had the same problem as the OP. Had to push the button several times to get the phone to respond.
HTC swapped my original N1 with dust under the screen and then sent me one that eventually had the power button crap out.
My GF's Nexus One has had no issues at all and we bought around the same time. My current (third) N1 is now rooted so I'm crossing my fingers that I won't need to deal with HTC again.
I love both the N1 and Android, but from my experience, I'm shocked and disappointed with it's poor build quality.
hypersonicx said:
The issue you are having is indeed a hardware problem. Well for the OP it is. I had a Nexus that was in the same situation. You can tell its not a hardware problem because if you remove the battery and put battery back in, the phone wont power up unless you press the power button like 8 to 10 times. That my friend is a hardware situation.
I created a small fix for mine. I should have created a youtube video of it lol. What I did was removed the back cover and batter and inbetween the Power Button and The Phone itself youll see like a small crack or very small gap of space between the phone and button. I stuck some small very small thin piece of paper in that gap. This will raise the buttun away from the phone just a lil bit. Put the battery back in and back cover back on. And noticed my button working 100% again.
So long story short the button itself starts to not make contact with the switch on the mother board or somethin. My bootloader was unlocked so i never got HTC involved. If your on cyan lates rom you can set it to wake via trackball under settings.
In the end, I ended up selling that N1 on craigslist for loot for a HD2 and HD2 was gargage (out dated OS and 65k color max display at LCD) and ended up selling the HD2 and got another nexus.
PS - I did have one of them argyle clear body cases on it that fit the N1 very snug and tightly, and wonder if that had somethin to do with power button goin out since it was rubbing against it repeatily.
Click to expand...
Click to collapse
Wow... I'm shaking my head at this. You'd think HTC would have thought about this some more...
Crossing my fingers, cuz my power button still "works the first time, most of the time"..
Yea I gave myself a good month of testing this phone before even considering rooting and I'm glad I did.
My first unit was rooted and it was hell to get htc to support my fix over a dead pixel so naturally on my second phone I avoided rooting.
With the build quality on these phones (unfortunately) I would recommend NOT rooting for a good month or so to make sure you don't need warranty support.
I've ended up doing the repair option because I can never justify a $529 hold. Will get a ****ty flip phone loaner from Tmobile for the time being.
sorry to hear your issues but thank you for pointing out that app "no lock". I've been waiting for something like this! Now I can wake my Nexus with the volume button rather than the power button(wear and tear) or the trackball(it gets dirty from touching too much so I never do).
Have any app can replace power button?
I got a ****ty samsung flip phone loaner from tmobile. Ironically, I feel the call quality on these old phones are better than all the smart phones i've owned lol
Will this issue eventually happen to every one? That would be horrible..
Eclair~ said:
Will this issue eventually happen to every one? That would be horrible..
Click to expand...
Click to collapse
I guess that all depends on how much people "baby" their phones. Then again, we all die eventually.. same with technology.
ChillRays said:
I guess that all depends on how much people "baby" their phones. Then again, we all die eventually.. same with technology.
Click to expand...
Click to collapse
Phone was never dropped and was in one of those gel cases. I use my phone heavily but no more than I've used any of my other phones. That power button is definitely not made for heavy use. I'd hope froyo has a trackball awake feature because from what I read on the interweb this problem is definitely not exclusive to a select few people.
That really blows about the power button. I've heard of that alot now and feared it as well. I'd never heard of the "nolock" program so I'm really glad you mentioned it. Downloaded it and fired it up. Talk about a sweet program, I can't believe it flies to far under the radar. I'm not rooted so it's definately a great program as I wanted trackball wake. Plus you can create a widget on the desktop so you can toggle it off. Sorry about your phone but thanks for the program. I hope you get your phone fixed soon.
Wow a 1 day turn around. My phone should be back here tomorrow in the morning. Seems like HTC customer care is improving?
uansari1 said:
Wow... I'm shaking my head at this. You'd think HTC would have thought about this some more...
Crossing my fingers, cuz my power button still "works the first time, most of the time"..
Click to expand...
Click to collapse
Eh TBH I've heard of iphones with the same problem. Manufacturing tolerances in any product inevitably produce a few faulty units...that's what the warranty is for.
Just be glad your N1 will never decide that its automatic backup is now encrypted and password-protected and that you can't use your phone until you figure out what the password you never set is (happened on my brother's iphone 3G)
hypersonicx said:
I created a small fix for mine. I should have created a youtube video of it lol. What I did was removed the back cover and batter and inbetween the Power Button and The Phone itself youll see like a small crack or very small gap of space between the phone and button. I stuck some small very small thin piece of paper in that gap. This will raise the buttun away from the phone just a lil bit. Put the battery back in and back cover back on. And noticed my button working 100% again.
Click to expand...
Click to collapse
Can you please explain how to remove the power button? Can it be removed alone or you have to remove all the screws and body of the phones?
I can turn on the milestone with the power button but when the OS has booted up it becomes unresponsive, if i keep pressing it it sometimes goes to the power off menu but besides from that it does not work
also i can no longer boot into the bootloader but recovery still works, the last rom i installed was the cronos rom with the included kernel, i used this rom for most of the day and it was fine untill i got home
hopefully someone can help
so...no one has any idea what i can do?
Hi silvacrest, I know this is a very old post (in Internet years), but have you (or somebody else) by any chance found a fix for the problem you described? My Milestone running CM7.2RC1 just started to present those same symptoms.
Thanks!
I have the same problem, started an hour ago, i don't know why, someone please help!
Try taking the battery, SD, and SIM out and using a can of compressed air (NOT an air compressor machine, those pull tons of moisture out of the air and can cause serious damage to your phone) on every nook and cranny of the device. Around and in the headphone port, around the power button, everywhere inside the battery compartment, etc. You'd be amazed at what problems dust can cause.
Thank you for the advice, I'll try that and keep you updated!
Sent from my Milestone using xda premium
Don't recommend this.
You will break the button for good and you'll need to open your phone, well if think you already need to do that.
The milestone button is composed of a thin foil glued to a metallic case, the glue gets old and the adherence with time will decrease and the foil will get dislocated from it's location. This is why your buttons won't work anymore.
If you use compressed air will probably break the button. I have fixed mine by putting a little thin foil of duct tape after I put the foil button in place.
Good luck.
There are more than enough videos out there that shows how to open the milestone.
Hi i2gh0st, in my case, the milestone now sometimes acts as if the power button was pressed, long or short press, waking up the device, displaying the menu or even boot when the phone is off.
You think this behavior could correspond to the foil problem you described?
I don't think so, the button should not work at all, unless it got stuck on press mode. Anything is possible its a ****y button if you look at it from an engineering way.
When I assembled my phone last time I noticed the volume up didn't work, so I opened it again and I found the foil glued to another place instead of its location. So everything started to make sense why buttons break down.
Sorry if I don't really make myself understood, I'm not that good at technical English.
Oky, can't find any relevant video or picture to show you, so I'll open my phone again in week-end after my exam and make a video or some pictures. Just wait a little
Well, I have a problem which makes the X1 practically unusable. Everytime I hit it with less or more power, or when I move the slider a bit faster, and even when I press on the slider in the opposite direction when closed (like from right to left) it turns off... I got it apart and cleaned every part of it, but there is no improvement.
I can't mention a certain moment in the past from where it started. All I can say is that I have dropped it twice and broke the plastic parts, but the problem appeared some months after, so this may not be the main cause. Also I took it apart once (before it started to turn off suddenly) because the screws that were supposed to keep the slider on it's place went out.
I used it for almost 2 years, but I don't have enough money for a new device (nor a second-hand one like HD2), so if you can even suppose what's the problem, please tell me.
Later Edit: Another thing I noticed after pressing each part of the X1 is that the problem is somewhere in the upper part (near the camera... I noticed it when I tried to pull the stylus and when I pressed the volume buttons...
I'll take the inside out again, now that I know in which side is the problem. I'm on my backup phone right now, so I have nothing to lose... I still think is something wrong with the battery contacts or somewhere near those, so I will check again... I'll tell you if I find something.
Looks like a flex cable problem.
SDogo said:
Looks like a flex cable problem.
Click to expand...
Click to collapse
I checked the flex cable, but nothing is wrong with it... It may not be well fixed on the mainboard, and it totally shuts down, not only screen/buttons problems...