Database Develop

[Q] Case & screen protector questions

Hey guys,
Anyone found a hard case that fits in the car dock yet? Tried the incipio one but it's pretty tight, and the last thing I wanna do with my shiny new bionic is to go wedging and squeezing it
Also, I've heard that because the screen is gorilla glass there's really no need for a screen protector, anyone wanna weigh in on this? I generally carry the phone in my pocket with nothing else in it, should I be worried about scratches or scuffs through normal use and carrying? In the event of a bad enough drop/scratch that the screen would get damaged, would a screen protector provide any help anyway?
Thanks in advance for any advice, and hope everyone is enjoying their phone as much as I am!

soul777toast said:
Hey guys,
Anyone found a hard case that fits in the car dock yet? Tried the incipio one but it's pretty tight, and the last thing I wanna do with my shiny new bionic is to go wedging and squeezing it
Also, I've heard that because the screen is gorilla glass there's really no need for a screen protector, anyone wanna weigh in on this? I generally carry the phone in my pocket with nothing else in it, should I be worried about scratches or scuffs through normal use and carrying? In the event of a bad enough drop/scratch that the screen would get damaged, would a screen protector provide any help anyway?
Thanks in advance for any advice, and hope everyone is enjoying their phone as much as I am!
Click to expand...
Click to collapse
The screen protectors they try to sell you at the VZ stores are *always* useless on *all* phones. And since the Bionic has gorilla glass, even the invisibleSHIELDs and Bodyguardz are useless also. You don't have to worry about scratches and scuffs at all on a device that has gorilla glass.
As for cases, I don't plan on using one at all, so I don't have an opinion on that.

i purchased the Shell Holster combo from Verizon and if you remove the insert in the car dock the phone will fit in it with the hard shell on it.
The hard shell also works with the extended battery.

I'm looking for a case that fits over the extended battery. Didn't like the uncomfortable plastic one verizon offers. Haven't seen any others.
Sent from my DROID BIONIC using XDA App

I tried the shell holster combo, didn't seem to fit in the car dock even with the insert removed. It felt like the bulge that allows for the extended battery made the case too wide for the clamp on the car dock to fit over the phone, but I was also being pretty delicate with the thing (like I said, I REALLY don't want to go wedging and squeezing anything on my new baby!), but maybe I missed something? Can you post pics of yours in action?
I'll also say that I thought it was odd that the only clamshell holster that my verizon store had was one that fit the extended battery, it definitely seemed to add a lot of bulk to the phone that you don't need if you're not using it. Is there just the single "one size fits all" version of this case, or are there separate ones for the standard and extended batteries (which seems like it would make a lot more sense)?
Also, thanks for the advice on the gorilla glass, I did get a set of verizon screen protectors (even though I know they're worthless) just as a temporary measure until I could get a better one, but I guess I'll be tearing that thing off and seeing how it goes. Anyone else wanna add their weight to this recommendation and make me feel a little better about going au-natural on the screen? I'm coming from a Dinc which definitely needed the screen protector, so I may just be a little paranoid, but it would totally ruin my day if I went without and then ended up with a permanently scuffed screen
Thanks again for all the advice guys, I'm totally loving this thing, just gets better and better every day I use it!

I didn't use anything on my screen (or a case for that matter) on my DX for the year I had it and the screen still looks brand new. I usually carried the phone in my pocket with nothing else in the pocket. Also dropped the phone a few times and no damage whatsoever.
Sent from my DROID BIONIC using XDA App

I had Gorilla Glass on another phone and used it for over a year with ZERO scratches. I do not plan on using a screen protector with my Bionic. However, I am shopping for a thin case to stop surface scratches.

I had two OG droids over a period of two years that never had a screen protector.
One did get a very minor scratch but the other I had for longer was flawless the entire time.
I think the only thing you have to watch out for if you're going bare is sand.
So what are you guys recommending for cases? I like the Incipios, but if the holster works in the car dock, that'd be a big selling point.

azshorty2003 said:
I'm looking for a case that fits over the extended battery. Didn't like the uncomfortable plastic one verizon offers. Haven't seen any others.
Sent from my DROID BIONIC using XDA App
Click to expand...
Click to collapse
Looking for a case to fit over the extended battery as well. Hoping that there will be some soon!

You do NOT need a screen protector... rocked the D1 for ~2yr without one and not a single blemish became of it.. it has the same gorilla glass screen:
Youtube:Motorola Droid A855 Key Screen Scratch Test
As for cases... I got the 'high-gloss silicone' case from VZW... I like it, EXCEPT that the power button doesn't work in the car-dock. I was thinking of returning it, but I might just go exacto on it and make a little cut-out for the power button.

I don't know if this is very relevant but tomorrow i'm picking up the otterbox defender bionic case from radioshack (got a buddy whose a rep that can get me a discount). I've seen the otterbox cases on other phones and they're awesome. They do add a lot of bulk but if you're often at risk of destroying your phone if you drop it like I am, (I work at citizens bank park in philly) the bulk is well worth the protection.

Wow, some of you guys are very lucky. Gorilla Glass, without a doubt, CAN SCRATCH. It handles things like coins and keys fine, but things that are harder, like sand, will scratch it. It amazes me that some people still say its unscratchable. Do yourself a favor and get a good quality screen protector, not that Zagg garbage. I recommended Steinheil Ultra Crystal. Once its on, you'll never notice it. Just like glass.

So, just in case anyone was wondering, I did end up finding a hard case that fits in the docks/mounts easily and allows charging and dock mode. The Incipio Feather is what I got, and I'm really liking it. It barely adds any bulk to the phone, but it gives it enough protection to ward off pocket scratches or dings and would probably do fine in a small drop. It does come with a screen protector but I wouldn't recommend using it, it's one of the harder plastic ones that picks up fingerprints like crazy, and while it's big enough to fit the entire screen it doesn't bend to conform to the screen's curves so it overhangs and lifts up around the edges which sucks. I'll probably end up getting a Zagg or a Steinheil instead, but as for the case I highly recommend it to anyone who wants a hard case but not much bulk!

My steinheil screwed with the proximity sensor.
Sent from my Xoom using XDA App

skullvet said:
My steinheil screwed with the proximity sensor.
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
Interesting. Did you contact them? I haven't had this problem on my phone or tablet.

I've heard that the OEM case verizon sells fits in all the docks. I believe there's some sort of insert that you can pull out to adapt for the case. Thoughts...?

cbal04 said:
I've heard that the OEM case verizon sells fits in all the docks. I believe there's some sort of insert that you can pull out to adapt for the case. Thoughts...?
Click to expand...
Click to collapse
Gel OEM case fits without the insert. I rock it everyday.
Sent from my DROID BIONIC using xda premium

Yes, the oem SILICONE cases fit in the docks, but if you're like me and want a hard case you'e SOL. There are only three hard cases that verizon sells for the Bionic, the Incipio two-piece case, the Otterbox, and the shell holster combo, and none of them seem to fit the docks and allow charging/dock mode (not to mention that the otterbox and shell/holster are both huge). You're right about the insert, but it still doesn't help with any of the hard cases that were released at verizon, which is why I'm so stoked to find the one I did!

soul777toast said:
So, just in case anyone was wondering, I did end up finding a hard case that fits in the docks/mounts easily and allows charging and dock mode. The Incipio Feather is what I got, and I'm really liking it. It barely adds any bulk to the phone, but it gives it enough protection to ward off pocket scratches or dings and would probably do fine in a small drop. It does come with a screen protector but I wouldn't recommend using it, it's one of the harder plastic ones that picks up fingerprints like crazy, and while it's big enough to fit the entire screen it doesn't bend to conform to the screen's curves so it overhangs and lifts up around the edges which sucks. I'll probably end up getting a Zagg or a Steinheil instead, but as for the case I highly recommend it to anyone who wants a hard case but not much bulk!
Click to expand...
Click to collapse
Hey I'm considering this Feather or the Seidio Surface case (which I had with my Incredible). From the pics on the Incipio website for the Feather case, it looks like the top corners are exposed...is that true? Its a little hard to tell from the website pics. Would you mind taking a couple of pics of the corners with the case on and posting here?
Thanks!!

papasmurph said:
Hey I'm considering this Feather or the Seidio Surface case (which I had with my Incredible). From the pics on the Incipio website for the Feather case, it looks like the top corners are exposed...is that true? Its a little hard to tell from the website pics. Would you mind taking a couple of pics of the corners with the case on and posting here?
Thanks!!
Click to expand...
Click to collapse
I am wondering this as well. Seems like the bottom chrome bezel might get dinged from a drop. Only thing keeping me from loving that case.
Sent from my DROID BIONIC using xda premium

[Q] Incipio Feather Light Case?

Does anybody have this? It looks really sharp (and I'm about to order one) but the only thing holding me back is the top/bottom. It looks like it doesn't cover it properly. Whenever I've dropped a phone and got some scuffs, it's always the top and bottom that take the brunt of it.
If you have this case, could you post some pics? Or provide some insight to the protection? Here is a link to it on Amazon:
http://www.amazon.com/Incipio-MT-143-Feather-Motorola-Bionic/dp/B005DQF7TU

i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.

envizion58 said:
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
Click to expand...
Click to collapse
Ok ok, I like. Can you post some pics? I've seen a bunch of pics online, but I want a clear view of the top and bottom.
Sent from my DROID BIONIC using xda premium

i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html

envizion58 said:
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
Click to expand...
Click to collapse
Thanks for the link, just checked it out. I'm still torn. I absolutely LOVE the look and sleekness of it, but I know as soon as I buy it I'll drop my phone and scuff the top. This would anger me
I dropped my x2 three days after purchase and scuffed it all up right at the top. I haven't let this Bionic be naked once - it was covered before I left the store.
It's a damn shame too - because this phone is sexy naked.
Decisions decisions...
Sent from my DROID BIONIC using xda premium

I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.

I bought the incipio feather a few weeks ago and its by far the best case out there if you like to keep the curve of the phone and you dont want to add an siginificant bulk

dendthoff said:
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
Click to expand...
Click to collapse
Which Cruzer Lite cases did you get?

I for one, love the Feather case...but alas, I contacted Incipio and they have no plans to make one for the extended battery. Does anyone know of a case that is similar to the feather, but fits the extended battery?

Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.

efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
Thanks for the post - good read.
I researched the case you spoke of and it's very similar to the Verizon gel case I currently have. It definitely provides the right amount of protection, but I'm looking to get that "sexy naked feel" the unprotected Bionic provides.
Here is what I'm thinking. I'm going to order the matte black phantomskinz skin. Cover the top and bottom (the only parts exposed from the incipio feather case) and then rock the incipio. Might be slightly ghetto, but I'm sure I can get it looking good. That will give me the lightweight feel of the incipio case with some protection from nicks and scratches on the top and bottom.
I'll post pics when I make it happen.

I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.

efingguy said:
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
Click to expand...
Click to collapse
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium

Just ordered the incipio feather. I'll give my opinions in two days.

mistawolfe said:
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!

efingguy said:
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
Click to expand...
Click to collapse
My gel case from Verizon does get very sticky and greasy. Makes me mad.
Sent from my DROID BIONIC using xda premium

Update..
I just noticed my desk dock had a "padding"... it totally fits with this case on!

Got this case today.
Initial impressions:
*Absolutely love the thinness of it. It feels like I don't have a case on. Looks sharp.
CONS:
*No top and bottom protection (I knew this before purchase)
*Back gets smudgey

efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
You know what I just realized? When I wrote this post, my phone was in a TPU case. Lol.
I got the smoky argyle one, and definitely loved the appearance and lightweight feel of it. I thought it felt a little janky by the power button (was pretty loose) and there were some leftover nubs from where it was cut - clearly visible against the black background of the screen.
I got some black sandpaper and sanded it down, but it left the case looking like garbage. I got it for $2.95 + $2.95 shipping, so I'm not complaining. I might end up ordering another.

I just got this case, iridescent red one, I agree the top and bottom is exposed but the look and feel of it is very nice. It is very sexy looking as well, doesn't cover anything that shouldn't be covered like holes etc.
The main reason I got this one was that someone said it would fit in the Moto car dock, and it does. However, if I hit a bump some times it pops up justttttt enough to stop charging. Pop it back down and it stays for a while again.
Funny no one else ever mentions this but I live in Florida, and every single black droid I have owned (1, 2, 2global, and now bionic) overheats when going on long trips and using Nav. Can't charge it when it overheats. I wanted to go with Iridescent Red to maybe reflect some of that heat...hope it works.
Also, red and black just go together....

TPU Hybrid case with kickstand for Samsung Galaxy Note II (Review w/ Pics)

Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".

Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...

BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!

i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?

I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app

well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!

yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol

Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand

....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!

one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...

I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app

jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!

This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.

for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too

Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium

No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case

The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.

Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium

They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.

LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.

LUVVITT Clear Grip (Case Review)

I don't know if this case has been reviewed yet or not but I just got it today. I had to find a case quick and it needed to be cheap since I don't know if I'll be getting the HTC 10 or LG G5. It also needed to be available for same day Amazon shipping since I couldn't go another day without a case. Don't get me wrong, I would have loved to use this phone without a case but it's design makes it a little difficult for me. My palm is always touching the screen which causes some minor issues but my biggest complaint is while playing a game such as Trials Frontier. When playing a game like this, it starts to become uncomfortable after just 5 minutes of play. It's most likely due to the phones thin edges which are rounded but still sharp when holding it horizontally.
Anyway, this case fixed all of my issues. It still keeps the phone very thing but it provides just enough thickness to the edges to make the phone feel more comfortable when using. The case itself feels well made but I suppose there isn't much to screw up with a TPU case. All of the cutouts match up and the buttons stay very crisp. The case provides a nice grip without providing to much grip to where it becomes an issue sliding your phone in and out of your pockets. The actual fit of the case is very snug but it's still easy to remove. I suppose if you keep on removing it and installing it, there is a possibility it could become loose.
In regards to protection it's not going to work any miracles but I'm sure it would provide some kind of protection during drops. It's a super thin case that has the corners slightly raised. They are raised just enough to keep the display off of a hard surface if the phone falls face down or if you like keeping your phone face down on the table. These raised corners however only slightly sit above the front glass so dropping it on an uneven surface such as asphalt could have dire consequences. The back is no problem at all as the raised corners give the back glass more clearance.
If you're looking for a crystal clear super thin case that offers nice grip, decent protection and allows you to showcase this nice looking phone then you might be interested in it. If you care more about protection than the way your phone looks and feels then this probably isn't the case for you.
You can pick it up on Amazon for $12.99 (PRIME Eligible.)
Side Note: The Edge display keeps full functionality if that's important to you.

Where are all the "Real" pictures?

felloffthetruck said:
Where are all the "Real" pictures?
Click to expand...
Click to collapse
I did this late last night. I'll take some pictures today and add them.

i bought 4 luvvitt cases when they were like $4-5 on slickdeals including this one. haven't opened this one yet, but will. thanks for the review.

Does the back have texture? Does part of the phones glass back stick to it at all?
Also btw the sale on these cases (including the normal clear one) are still going on with the code SLICK007

johnnyz86 said:
Does the back have texture? Does part of the phones glass back stick to it at all?
Also btw the sale on these cases (including the normal clear one) are still going on with the code SLICK007
Click to expand...
Click to collapse
Yes. The back sides are textured. I also just removed it to see if it stuck and no it doesn't.
I don't know what kind of deal that coupon code gets you but it its $10 or less then I'd definitely get one. I needed the case same day shipped through Amazon Prime so I just paid full price.
Sent from my SM-G935T using Tapatalk

Actual pics?
Sent from my SM-G935T using Tapatalk

I also got one as well during the SD promo as well, Posted some pictures of it bellow and sorry if the quality is not up to par.
Just wanted to help out on the real pictures. It's fine I've been using the Spigen Tough Armor for now. Just wanted a clear one for home or if show of how nice the phone looks while still on case.

Thanks from the real pictures. I knew I was forgetting something today. My wife had me running around like a chicken with my head cut off today since we are having family over our house for Easter tomorrow.
Sent from my SM-G935T using Tapatalk

cmart4 said:
i bought 4 luvvitt cases when they were like $4-5 on slickdeals including this one. haven't opened this one yet, but will. thanks for the review.
Click to expand...
Click to collapse
can you detail your opinions about the build and pros cons of the Luvvitt cases.
Bought sleek armor and aside from the lack of lip it seems like a nice low profile case with some protection. Just dont like the fact that the phone when face down with the case does not have enough lip to protect the screen.
The home button rest directly on the surface.Testing this out I caused micro scratches on the home button which is naturally a bit raised.
Would love pics and opinions on what yours are like...

Tempered glass and cases

Has anyone found a pretty decent case/tempered glass for this device as of yet (Any budget)
Pictures are awesome if provided, would love to see what our community had found so far. (I can't seem to find one that fully seals the entire screen instead or simply the edges)

All tempered screen protectors that have come out so far appear to completely suck. They've all been the type with only a thin strip of adhesive along the edges, thus making them come off really easily. I sincerely hope a good one comes out soon. If one doesn't in the next month or so, I might just get one of the crappy ones, but purchase the overpriced ($30-40) version from the T-Mobile store. They will replace it for free everytime you come in. This would definitely save money and frustration in the long run over repeatedly purchasing the cheaper ones.
I ordered the Ringke Fusion-X case, but they only became available a day ago, so it only arrived today. I'll update with a short review when I get home from work. I've had one for another device, though, and really liked it. In the mean time, I've been using this $5 clear TPU case, which is exactly what one would expect if they've ever had one before. I will note that the buttons are a bit difficult to press, but otherwise it's perfectly fine. I chose this one over the other similar ones because of the slightly thicker bumpers on the corners.
I'm debating getting one of the Otterbox cases, but I'd really like to see one in person first, so that I can evaluate the bulkiness of it before dropping $60. I've always used/preferred lighter-weight cases, but then again I've never before had a $930 phone.
Update: I initially forgot to report back with my Ringke Fusion-X mini- review. It is a phenomenal case. It looks very good, and being able to see the back of the phone through the 100% clear back is nice. The somewhat thick rubbery-ish edges offer a great deal of protection without excessive bulk. If my previous experiences with similarly styled Ringke cases are and indicator, it will greatly increase the chances that drops will damage the phone. It also feels very great in the hand, and provides very good grip. Also, the buttons feel VERY good, even to the point of being nicer to press that the phone's buttons are without a case at all.
Although it would certainly be even more protective, it's unlikely I will end up ordering the Otterbox, as I feel confident the Ringke will adequately protect my phone given my usual degree of phone violence.

I can't speak to screen protectors but I had picked up the Spigen Rugged Armor case and it is excellent.

All of the screen protectors have been garbage thus far. As mentioned, you either get stuck with the black ring around the edges, thus losing screen space or bubbles because they dont adhere to the curved edges. Tried two brands and bot were a waste.
The cases all seem to be more or less the same. At least the TPU ones anyways. Tons for $5-10 and no major advantages I can see. Otterbox says no screen protector so you enjoy the display more. Code for we dont wanna make one that works well. YMMV though.

I've read that the one T-Mobile sells is pretty decent (if expensive). The reddit user who posted about it said hr believed it had the full adhesive, rather than just around the edges like the others I've seen, so that should help it not come off as easily. I'm probably going to get one today if they have them in stock. Also, a nice thing about getting one from them, which may justify the price, is that they will replace it for free whenever necessary.
This is the model.
http://www.pure-gear.com/shop-by-de...aligning-tray-lg-devices-high-definition.html

treesap said:
I've read that the one T-Mobile sells is pretty decent (if expensive). The reddit user who posted about it said hr believed it had the full adhesive, rather than just around the edges like the others I've seen, so that should help it not come off as easily. I'm probably going to get one today if they have them in stock. Also, a nice thing about getting one from them, which may justify the price, is that they will replace it for free whenever necessary.
This is the model.
http://www.pure-gear.com/shop-by-de...aligning-tray-lg-devices-high-definition.html
Click to expand...
Click to collapse
Does this have the black border around it or is it all clear?

Retarded Timing said:
Does this have the black border around it or is it all clear?
Click to expand...
Click to collapse
Unfortunately they did not have it in stock, so I had to order it for delivery. I will report back within the week (presumably), after I receive it. Pics, too, hopefully.

While I'm waiting for "IQ Shield LiQuidSkin" I ordered "PULEN Screen Protector"... I'll keep you updated!

I'm having a very hard time finding anything decent that seals completely with any rainbow effect going on

nyttliv7 said:
While I'm waiting for "IQ Shield LiQuidSkin" I ordered "PULEN Screen Protector"... I'll keep you updated!
Click to expand...
Click to collapse
Which one? There are two, one with the black border and one without. I ordered both but have only tried the one with the black border. Fit was nice but touch sensitivity sucks. Didn't seem like it adhered well. Had rainbow affect in the middle.
If anyone finds a glass protector without the stupid notch and covers the camera lenses please post here. I want full coverage like my V10 had. Didn't seem to affect the cameras at all. I want one that just has a hole for the speaker. A rear cover and camera lens protection would be nice as well.

Retarded Timing said:
Which one? There are two, one with the black border and one without. I ordered both but have only tried the one with the black border. Fit was nice but touch sensitivity sucks. Didn't seem like it adhered well. Had rainbow affect in the middle.
Click to expand...
Click to collapse
https://www.amazon.com/dp/B07H72M4QJ/ref=cm_sw_r_cp_apa_i_lrG2Bb2TGP5EP
https://www.amazon.com/dp/B077QKH77R/ref=cm_sw_r_cp_apa_i_ZvG2BbW7QJTWE