jmsnyc said:
autocap is also in thread_sms.htm - remove it from there too and it should be resolved in threaded mode too - now hopefully the fix is complete...
Click to expand...
Click to collapse
Meraki said:
I've turned off the option 'Capitalize first letter of sentence' in Input options, but it's still doing auto-capitalize when I'm sending SMS messages.
Does anyone know a way to make it stop doing it?
Thanks in advance.
Click to expand...
Click to collapse
Taajuus said:
Ok so I dont need this feature myself, but someone else was asking for it and I thought I had answe:
Start - Settings - Input - Options, untick "Capitalize first letter of sentence".
BUT, that does not change capitalizing in SMS? Why and wtf?
Click to expand...
Click to collapse
tft said:
every time i type a period, it wants to capitalize the next word, i disabled the option not to capitalize but obviously there are settings in windows that don't do a damn thing and appear to be there for no reason, why is the option there if it doesn't work!
anyone know how to i stop it from capitalizing? wm 6.1
Click to expand...
Click to collapse
Meraki said:
I've turned off the option 'Capitalize first letter of sentence' in Input options, but it's still doing auto-capitalize when I'm sending SMS messages.
Does anyone know a way to make it stop doing it?
Thanks in advance.
Click to expand...
Click to collapse
read here, just did a quick search on that...
to disable auto correction change the following registry key from 1 to 0 and soft reset (this will also disable "i" to "I", "wel" to we'll" and so on)
\HKCU\ControlPanel\Sip\SuggAutoCorr
Draken Korin said:
read here, just did a quick search on that...
to disable auto correction change the following registry key from 1 to 0 and soft reset (this will also disable "i" to "I", "wel" to we'll" and so on)
\HKCU\ControlPanel\Sip\SuggAutoCorr
Click to expand...
Click to collapse
still doesn't work (
Related
Hi Everyone!
Apologies for reposting, I tried searching but I couldn't get anything, and I just asked the same question under Dutty's Rom thread. Apologies!
I was wondering, does anyone know how to turn on the feature where in when you are creating a new SMS, you type in the first few letters of the name and it suggests possible matches.
I'm using Dutty's Diamond Rom.
Thanks!
Doesn't this work by default. It has always worked for me and I don't remember specifically setting any options in Messaging to make this work, perhaps the "Smart dialing" options in the phone also automatically apply to SMS???
jatin.ahuja said:
Hi Everyone!
Apologies for reposting, I tried searching but I couldn't get anything, and I just asked the same question under Dutty's Rom thread. Apologies!
I was wondering, does anyone know how to turn on the feature where in when you are creating a new SMS, you type in the first few letters of the name and it suggests possible matches.
I'm using Dutty's Diamond Rom.
Thanks!
Click to expand...
Click to collapse
I think it works like this: u start typing the name and the options(the names that fits what u wrote) pop up only if u push the space bar. Try that.
Try disabling xT9 (if you dont use an xt9 SIP).
Ta
Dave
\HKLM\SYSTEM\Inbox\RecipientAutoComplete
Set the DWORD 'MaxSuggestions' to 4.
Mikulec said:
I think it works like this: u start typing the name and the options(the names that fits what u wrote) pop up only if u push the space bar. Try that.
Click to expand...
Click to collapse
Thanks! that worked..it just showed the options at the bottom of the screen!
Thank you!
jatin.ahuja said:
Thanks! that worked..it just showed the options at the bottom of the screen!
Thank you!
Click to expand...
Click to collapse
No problem, u r welcome.
Does anyone else have the following problem ?:
When you go to the SMS tab, and press the small box to start writing new SMS, if you use the original Diamond keyboard, you can just type a few letters of your contact and it will fully appear. If you use TouchPal (I'm using version 3.5), this feature is disabled, you have to type your entire contact name every time, it doesn't recognize the first few letters and try to find a match. This is SO annoying !
Please tell me there is some workaround...
Could it be that the Diamond's original keyboard stores all the contact information in the Keyboard dictionary ?, if this is true, it means no keyboard apart from Diamond's original will allow quick find of contacts in SMS...
no problem with me..
say for eg you wanna call "home"
just press H O and enter and then it will detect home in my contact.
i suspect the problem may be.. touchpal "store" what you pressed in its own list instead of going up to the SMS directly..
Same problem. Would love to see an solution, but I think there is none...
Wizard,
Do you have the Touchpal keyboard ???
its free for personal use available online..
The contacts don't display when you start typing, but if you only type a few letters and then press send a page appears with all contacts that have the letters you've typed in their names. You can then tap the contact you wish to send to.
I don't find it a problem.
mouseymousey said:
The contacts don't display when you start typing, but if you only type a few letters and then press send a page appears with all contacts that have the letters you've typed in their names. You can then tap the contact you wish to send to.
I don't find it a problem.
Click to expand...
Click to collapse
Thanks.
How the hell did you figure that out ?, I would have never tried it myself...
Noam23 said:
Does anyone else have the following problem ?:
When you go to the SMS tab, and press the small box to start writing new SMS, if you use the original Diamond keyboard, you can just type a few letters of your contact and it will fully appear. If you use TouchPal (I'm using version 3.5), this feature is disabled, you have to type your entire contact name every time, it doesn't recognize the first few letters and try to find a match. This is SO annoying !
Please tell me there is some workaround...
Click to expand...
Click to collapse
slide up the 'enter' key on single-key layout for disable word prediction. then u can get back the single letter search and few letters matching feature just like original Diamond keyboard
desol said:
slide up the 'enter' key on single-key layout for disable word prediction. then u can get back the single letter search and few letters matching feature just like original Diamond keyboard
Click to expand...
Click to collapse
That's the first thing I tried, I was shocked that it didn't work !, does this work for you ???
Noam23 said:
That's the first thing I tried, I was shocked that it didn't work !, does this work for you ???
Click to expand...
Click to collapse
yes, its work for me
desol said:
yes, its work for me
Click to expand...
Click to collapse
How could this be ???, could you please tell me your Touchpal settings ?
Noam23 said:
How could this be ???, could you please tell me your Touchpal settings ?
Click to expand...
Click to collapse
i didnt set anything. its all be default n not using any language pack
desol said:
i didnt set anything. its all be default n not using any language pack
Click to expand...
Click to collapse
desol, does it work for you if you don't disable word prediction ?, Wizard claimed in this thread that even in word prediction it works...
Here is the quote of Wizard:
no problem with me..
say for eg you wanna call "home"
just press H O and enter and then it will detect home in my contact
Click to expand...
Click to collapse
beside the contact list problem, I found that the copy and paste button is not working too. Do you have this problem?
Noam23 said:
desol, does it work for you if you don't disable word prediction ?, Wizard claimed in this thread that even in word prediction it works...
Here is the quote of Wizard:
Click to expand...
Click to collapse
if I dont disable word prediction. I will use the way same with Wizard. Both way are work fine for me
Noam23 said:
Thanks.
How the hell did you figure that out ?, I would have never tried it myself...
Click to expand...
Click to collapse
Can't remember how I found it, almost certainly by mistake though
mouseymousey said:
Can't remember how I found it, almost certainly by mistake though
Click to expand...
Click to collapse
totally agree.. we're learn by mistake
just in case you guys are still experiencing this problem, i found a fix at http://forum.ppcgeeks.com/showthread.php?p=241036
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409\Ime File
set the Ime File value from \windows\eT9ime.dll to compime.dll
soft reset device.
yea i think touchpal has alot of problems. liek the new v3.5 when i ever type in the word "its" or "were" in my sprint diamond, phone restarts wtf and same thing in the htc mogul.
Anyone have this issue to or a fix to it?
Hey All,
I have 4 concerns about SMS that I need anyone to share his/her knowledge with them.
Is there anyway to start sms in an ABC Mode? (Not T9)
Second is there any registry setting that I can change so sms starts in the writing field not the phone number field?
Third, is there a way so I can I always enable CAPS to be always on??
Forth Is there any registry editing that can make the first letter I write in an sms to be a capital letter one? or any letter wrote after a (.) for example to be capital?
Please anyone shares his experience about these concerns.
Thanks.
Shouma said:
Is there anyway to start sms in an ABC Mode? (Not T9)
Click to expand...
Click to collapse
If you change to T9, or ABC, it should remember next time you write a message
Shouma said:
is there a way so I can I always enable CAPS to be always on?? (Not T9)
Click to expand...
Click to collapse
Depends on which keyboard, try pressing CAP button twice
Shouma said:
Forth Is there any registry editing that can make the first letter I write in an sms to be a capital letter one? or any letter wrote after a (.) for example to be capital?)
Click to expand...
Click to collapse
Should happen as default
You need to leave a space so that it puts a capital letter after a punctuation mark.
Shaady said:
You need to leave a space so that it puts a capital letter after a punctuation mark.
Click to expand...
Click to collapse
good point it does capitals the same as a normal PC using Microsoft Word.
Thanks mugglesquop and Shaady for responding...
mugglesquop said:
If you change to T9, or ABC, it should remember next time you write a message
Click to expand...
Click to collapse
Actually I always use ABC...and everytime I start to write a message I get the default T9 enabled :x
mugglesquop said:
Depends on which keyboard, try pressing CAP button twice
Click to expand...
Click to collapse
Nah...When I press CAPS twice it turns into the Small letters mode and then back to CAPS..which keyboard can do this?!
mugglesquop said:
Should happen as default
Click to expand...
Click to collapse
Not the case here also It does so when I write an appointment or something in the calendar...but It dont work when I write an SMS...
Shaady: I will try leaving a space after the (.) to capitalize the letter..however, it dont capitalize the first letter I write in the sms dialog.
Thanks dudes,
But how can I check the registry settings of the keyboard are right or not?
Much appreciated.
not sure on reg settings. what ROM are u using?
i use the 'Full QWERTY' keyboard, and tapping on the CAPS/shift key twice changes to caps lock.
mugglesquop said:
not sure on reg settings. what ROM are u using?
i use the 'Full QWERTY' keyboard, and tapping on the CAPS/shift key twice changes to caps lock.
Click to expand...
Click to collapse
I use the original 1.93.737.1 ROM m8.
Maybe bec. u use the Full Qwerty keyboard it saves the T9/ABC mode for the next time you starts it bec. I tried it and It worked.
However, I use Compact Qwerty and it never saves status of the ABC/T9 Mode I use...It always starts with T9.
Shouma said:
I use the original 1.93.737.1 ROM m8.
Maybe bec. u use the Full Qwerty keyboard it saves the T9/ABC mode for the next time you starts it bec. I tried it and It worked.
However, I use Compact Qwerty and it never saves status of the ABC/T9 Mode I use...It always starts with T9.
Click to expand...
Click to collapse
ah right, yeh i only use Full QWERTY
sorry cant help!
Hallo
I'm tired of all the the time hitting "send" by mistake when I'm typing a sms.
Does there exist a tweak so you need to hold the send bottom in for a while for it to send? So you can't press it quick..
The right notice
I have suffered from this when using extra thingie to enter (exotic) estonian letters like äüöõšž and if the device slows down a bit there (it happened just few times) then I notice that I unfortunately have pressed Send because the softbutton just had another function
darfri said:
I have suffered from this when using extra thingie to enter (exotic) estonian letters like äüöõšž and if the device slows down a bit there (it happened just few times) then I notice that I unfortunately have pressed Send because the softbutton just had another function
Click to expand...
Click to collapse
So ? What is your solution ?
mysterd said:
So ? What is your solution ?
Click to expand...
Click to collapse
Turn off TF3D! ;O)
Better solution:
FingerKeyboard 2.1 (search in Forum)
1. You get a better keyboard.
2. If you want, the keyboard covers the windows bar including the button "Send". You have to tap the keyboard away to push "Send". Works like a charm.
Jim Coleman said:
Turn off TF3D! ;O)
Click to expand...
Click to collapse
I just can't see the point in this...
The problem is with the softkey bar... Why do you suggest turning off TF3D ?
Tatsch said:
Better solution:
FingerKeyboard 2.1 (search in Forum)
1. You get a better keyboard.
2. If you want, the keyboard covers the windows bar including the button "Send". You have to tap the keyboard away to push "Send". Works like a charm.
Click to expand...
Click to collapse
Interesting
Thanks for your help !
mysterd said:
So ? What is your solution ?
Click to expand...
Click to collapse
What is yours?
Don't use the 3DFO message. Simple as that.
I never use that, just the built in outlook to send text messages.
In fact I disabled the 3Dflo plugin in today and I'm using right now the standard today with all the plugins that I want.
rogeriopcf said:
Don't use the 3DFO message. Simple as that.
I never use that, just the built in outlook to send text messages.
Click to expand...
Click to collapse
And there, you don't have a windows bar with a "Send"-Button? Strange ...
how on earth do i get it to stop auto-capitalizing ? can someone hack it for me or something, because i hate that .
go into settings man...there is an option for that... and by the way, def. NOT THE PLACE TO POST...just telling you now because if you dont learn, you will get torn to shreds by other members.
oshizzle1991 said:
go into settings man...there is an option for that... and by the way, def. NOT THE PLACE TO POST...just telling you now because if you dont learn, you will get torn to shreds by other members.
Click to expand...
Click to collapse
i did go to settings, there's no option for that .
jonesyruless said:
i did go to settings, there's no option for that .
Click to expand...
Click to collapse
Ummm...There's a setting called Locale and you will find the HTC ime there then you can turn it off.
Ace42 said:
Ummm...There's a setting called Locale and you will find the HTC ime there then you can turn it off.
Click to expand...
Click to collapse
i go in this order to;
settings
locale and text
touch input
then the options are keyboard types, keyboard language, text input, and tutorial. i click text input and it only says prediction, spell correction, word completion, sound, and vibrate . every option is unchecked, but it still automatically capitalizes the first letter of every new line or sentence .
jonesyruless said:
i go in this order to;
settings
locale and text
touch input
then the options are keyboard types, keyboard language, text input, and tutorial. i click text input and it only says prediction, spell correction, word completion, sound, and vibrate . every option is unchecked, but it still automatically capitalizes the first letter of every new line or sentence .
Click to expand...
Click to collapse
Is the other keyboard off since there are 2?
Ace42 said:
Is the other keyboard off since there are 2?
Click to expand...
Click to collapse
yes, i set touch input (htc_ime) as my default input method .