i rooted my new g1 and currently have JF 1.5.1... when i try to upgrade to 1.6 (cyanogen 4.2.15.1) its stuck at the g1 screen.i have the latest Amon RA recovery. do i have to flash cyanogen recovery image too? i also did a full wipe..all 3...
note** couldnt find cyanogen stable version. its like all his 1.6 builds are missing
geokuttan said:
i rooted my new g1 and currently have JF 1.5.1... when i try to upgrade to 1.6 (cyanogen 4.2.15.1) its stuck at the g1 screen.i have the latest Amon RA recovery. do i have to flash cyanogen recovery image too? i also did a full wipe..all 3...
note** couldnt find cyanogen stable version. its like all his 1.6 builds are missing
Click to expand...
Click to collapse
Here you go.
http://www.kanged.net/mirror/cm/
Binary100100 said:
Here you go.
http://www.kanged.net/mirror/cm/
Click to expand...
Click to collapse
thank you....dunno why 4.2.15 didnt work...but 5.8 flashed..
Related
okay this is what ive done...i use the flash rec apk and then backup and applied the ra recovery img. now i can go to the recovery mode...can i apply any rom not knowing the spl?...also one last question.... if i need to unroot do i do this by appliying the dreamin.img by pressing the end and camera then apply and this should unroot it right????
oh yeh i came from a cupcake build...on my g1
To get back to stock you flash the DREAIMG.nbh in bootloader. You need the 1.33.2005 SPL to flash a hero rom and a few others, but they will state that in the OP. You can flash any other rom though.
SUPER handy for partitioning SD cards!
jndd333 said:
SUPER handy for partitioning SD cards!
Click to expand...
Click to collapse
huh? what are you talking about.
hey..
okay i flash my g1 with flash rec.apk then i applied the recovery image and now i applied the 4.1999 rom from cyanogen but i wanted to try the blur rom...so i applied that...now if i go back to cyanogen rom do i need to get the 1.6 adp from dev site then apply the 4.1999 rom???
xghostyxjokerx said:
okay i flash my g1 with flash rec.apk then i applied the recovery image and now i applied the 4.1999 rom from cyanogen but i wanted to try the blur rom...so i applied that...now if i go back to cyanogen rom do i need to get the 1.6 adp from dev site then apply the 4.1999 rom???
Click to expand...
Click to collapse
there is a single flash version of 4.1.999 look for it in the dev section.
i just rooted my g1 with the amon ra recovery img and i installed kingklicks new 2.2 rom and wen i reboot the pone is stuck at the tmobile screen...ne help
do you have the proper radio and spl? if not, flash the radio first so you don't turn your phone into a paper weight.
bonkasnucca said:
i just rooted my g1 with the amon ra recovery img and i installed kingklicks new 2.2 rom and wen i reboot the pone is stuck at the tmobile screen...ne help
Click to expand...
Click to collapse
Did you wipe before flashing? How is your sdcard partitioned?
I am completely stuck as of now, tried everything! No idea what else I could try. I basically can install any rom just fine, Dwang 1.12 works fine, Cyanogen Mod 4.2.5 works fine too. I am not able to install the latest ones by either though, what could be the issue?
I have rooted MyTouch 3g.
What do you have on your phone right now, and what methods have you tried? What have your steps been?
I have 2 MyTouch 3g phones actually, one is my roomie's and I can install dwang's 1.13 just fine on it, weird .
For dwangs:
Backup
Wipe
Install
Reboot and get stuck on the MT3G boot screen
For Cyanogens:
Backup
Wipe
Install rooted Base
Install Cyanogens
Reboot and get stuck at MT3G boot screen.
It is my understanding that Dwang's latest is based off Cyanogen's 4.2.6, thus I can see why both of them won't work. But why?
I am on Cyanogen's 1.4 recovery tools, I've had Amon RA 1.3.2, as well as RA 1.4.
HBOOT: 1.33.0006 (SAPP30000)
Radio: 2.22.19.26I
anybody?
afive720 said:
anybody?
Click to expand...
Click to collapse
Sorry i can't help, but just to add on... I'm having almost the same issue, but with a G1. Although i can install any of Dwang's versions, including 1.13, but as far as cyanogen goes, 4.2.5 works great, but 4.2.6 and 4.2.7.1 i get stuck at the g1 logo when trying to flash. If anyone can help my set up is
SPL 1.33.0006
Radio 2.22.19.26I
Amon_RA recovery-RA-dream-v1.2.3.img
have you both done thorough wipes through the console?
Are you flashing the signed developer zip file before trying to flash the rom itself?
The process should be...
Wipe
flash signed dream developer zip
NO REBOOT
flash the rom zip on top of the previous zip
Reboot
you can find links to the signed dream dev zip here
http://forum.xda-developers.com/showthread.php?t=593626
Since the first guy has a mt3g, you'll need to find that primary file. The dream one wont do it for you.
check cyanogen's wiki over at cyanogenmod.com
I've had a similar problem. I follow all the instructions correctly, but Dwang's 1.13 works and CM doesn't. For CM I did everything, wiped, flashed 1.6, flashed CM, rebooted, and then it would go back into Recovery for some reason. I'd reboot again and it'd hang on the Rogers screen for me. I couldn't fix it so I wiped, flashed Dwang's, and his worked fine. No clue why CM wouldn't work for me since that's the ROM I actually wanted.
DiSTroy3d said:
For CM I did everything, wiped, flashed 1.6, flashed CM, rebooted, and then it would go back into Recovery for some reason. I'd reboot again and it'd hang on the Rogers screen for me.
Click to expand...
Click to collapse
Yes the first reboot writes the radio files. The second boot writes the cache.
You will have to hit reboot when the cache writing stops. (reboot will become an option in the recovery)
This is the first boot of a brand new OS as far as your phone is concerned and it will take a few minutes. The boot process will take a while. The phone is writing and moving the entire android OS.
I have had mine hang for about 10 minutes before. Sometimes it is 5 minutes.
Mine normally hangs for about 2-5 in the G1 boot screen and another 3-5 in the cyanogen logo.
Whenever i try to flash cyanogens rom i get stuck at the g1 screen, every other rom is fine, i have tried wiping and reparittioning
jad011 said:
Whenever i try to flash cyanogens rom i get stuck at the g1 screen, every other rom is fine, i have tried wiping and reparittioning
Click to expand...
Click to collapse
Correct
Wipe-->HTC 1.6ADP(flash)-->CYangogen(w/o reboot flash)
Wrong
Wipe-->Cyanogen-->reboot
so i flash the 1.6 image and then cyanogen?
is the 1.6 a rom or an image?
jad011 said:
so i flash the 1.6 image and then cyanogen?
is the 1.6 a rom or an image?
Click to expand...
Click to collapse
Try this cyanogen rom modded by wesenger
http://forum.xda-developers.com/showthread.php?t=592466
Im using it and its more stable than cyan so far.
I am currently running xRom Eclair v1.0 and have been having problems with it. I would like to go back to Cyanogen 4.2.13 but every time I try it gets stuck at the G1 logo. I have searched the forum, but not sure if I'm searching for the right thing. I am using RA recovery and wiped everything that is on the wipe screen but no luck. Is there a way to install Cyanogen 4.2.13, if so, how would I go about doing it?
Thanks in advance!
rma1482 said:
I am currently running xRom Eclair v1.0 and have been having problems with it. I would like to go back to Cyanogen 4.2.13 but every time I try it gets stuck at the G1 logo. I have searched the forum, but not sure if I'm searching for the right thing. I am using RA recovery and wiped everything that is on the wipe screen but no luck. Is there a way to install Cyanogen 4.2.13, if so, how would I go about doing it?
Thanks in advance!
Click to expand...
Click to collapse
did you flash HTC's recovery image like it says in the instructions?