G1 Physical Keyboard Issues - G1 Q&A, Help & Troubleshooting

So today I woke up to my G1's Alarm going off as usual. I hit the snooze button for about 2 hours before finally getting up and going through my text messages. I went to my first text and tried to type the letter "i". However, when striking the key, it exited my thread. Thinking it was a fluke or that I was still half asleep I tried 3 or four more times before rebooting and waiting through my long boot screen to find the same problem. Certain keys were typing whatever they wanted. The "o" key would type "kbv+" then open a google search. Some other keys were acting funny also, so the first thing I did was a nandroid backup followed by a wipe and reboot. Same problem. I wiped and reformatted again, still to no avail, this time not using my sd card so that my apps were not loaded. Thinking it might be physical I stripped the phone down to its core checked all my connections etc, and rebuilt it and wiped again. Still nothing. This weird keyboard error keeps happening, and I would really prefer to use my actual keyboard instead of a virtual one. On a side note, running console from my recovery menu allows me to type normal keys. Anyone have any ideas? Ive looked around for awhile and some people mentioned the problem but noone seems to have a solution. If you were wondering I am running Cynagen 2.1, well was..>>..

Related

My Kaiser is dying; possibly PointUI/virus related

The following (long!) post was originally posted at the PointUI forum, but I thought it best to cross post it here. I've tried to organize it as best as I can and appreciate those with the patience to read it and the good will to offer help.
------------------------
My AT&T Tilt (HTC TyTN II) is basically out of commision right now, and I can only track the source of the problems back to the latest update of PointUI (v1.02b, Feb. 4th 2008), as I've done nothing else with the phone since. However, seeing as how I've uninstalled PointUI and the problems persist (and are getting worse), I suspect a virus is afoot, or some other lovely problem.
Since the update, I've experienced the same problems as everyone else on this PointUI thread (system hangs on "running apps" screen and randomly), but in addition to that, several other things. I am running the stock AT&T ROM without the bloatware. These have been my symptoms for the most part since then:
Periodically, animations between menus would slow down considerably and sometimes freeze for a moment, even when I had nothing else running in the background. This would happen for any menu: the cog, the bottom bar, favorites, etc.
The touchscreen would stop working (usually, only within PointUI). This usually happened when animations would slow down, but it would also occur alone, randomly. The hardware buttons would still work during touchscreen failure, usually, but sometimes they wouldn't, and I would have to soft reset.
Sometimes, the power button wouldn't work, and I would press it several times thinking I didn't do it hard enough the first few times. After ~20 seconds, the screen would turn itself off and on. When the screen was on, it would not responding to touches.
The PointUI top bar that appears when using any application would, at random, not work. By this I mean when I would tap it, it's like it wasn't even there -- the Start menu would come down, or the volume control, date/time, etc. depending on where I tapped it. Also, the top right button (red X, or the check mark) would not display correctly in programs or the today screen (a check mark when it should be an X, etc.), randomly, and would not be responsive.
Yesterday (Feb. 23rd), things took a turn for the worse. Here's what happened:
When I started up Tom Tom, the screen went completely non-responsive. Only buttons would work.
After exiting Tom Tom (in an attempt to restart it), the touchscreen would continue not to work, both in PointUI and regular old Windows.
Shortly following this, buttons would stop working, and the entire phone would freeze up. Couldn't turn the touchscreen on and off. I did a soft reset.
During startup, when it showed the AT&T logo, the screen dimmed itself to the lowest brightness setting (it never does this). It would remain this way all the way through the bootup process and into Windows as well, never getting any brighter. Even after going to the backlight settings and increasing the brightness, the screen would get brighter, but would never turn off.
Once in Windows, the touchscreen was completely non-responsive. Buttons would still work, but everything would move really slow.
The screen would never turn itself off. Also, when pressing buttons, the screen would never get any brighter.
After mashing the buttons a bit (in anger, yes, but lightly), the touchscreen alignment application came up, asking me to touch the screen in a few places. This worked.
Then, a call came in. The screen froze during the animation for the notification of an incoming call. Also, the phone started to ring, but within 1 second stopped. However, it would vibrate nonstop (my phone is setup to ring and vibrate at the same time) till the end of the earth!
At this point, none of the buttons would work, not even the power button. Did a soft reset.
This was followed by the same exact symptoms ~4 times (touch screen not working, never turning off and staying at the same brightness level, etc). Outgoing calls would work ok, but each time, a call would come in and freeze up my phone.
Eventually, after several resets, the touchscreen would work without having to mash the buttons to get the touchscreen alignment app running. However, it would still freeze on incoming calls (only).
Somewhere between all the resets, I realized that sliding out the keyboard would never switch the screen to landscape. I can still type and my text would show up on-screen, and screen taps still work properly (even touchflo), but all of this would occur while still in portrait mode.
Lastly, the power button would only work once. It can turn the screen off, but not back on, ever.
Somewhere, between the resets, I uninstalled PointUI, which did nothing. I also tried running Sprite Backup, which would never open (and still doesn't at time of writing)!
Before the PointUI update, none of these symptoms were present (earlier release was v1.01b, used since early January). After the update, they began creeping up, getting worse over time. I have installed nothing else since the update, and have only ever sync'd the phone with my computer to charge it.
Today (Feb. 24th), it started getting a little worse...
When I make calls, sometimes the microphone doesn't work at all. I can hear the person I'm calling, but they can't hear me.
Sometimes, the green phone button won't start the phone application.
Power button isn't turning off the screen anymore at all.
This is the current status of the phone. Weathered, battered and beaten, it marches on, still capable of opening the HTC Audio Manager and playing my MP3's in consolation.
Any help regarding the source of these issues is greatly appreciated.
Some additional notes/summary:
I am running the stock AT&T ROM without the bloatware.
I haven't dropped the phone or let it get wet.
I may hard reset sometime this coming week, probably Monday. The first thing I'll do is reinstall PointUI v1.02b, and maybe TomTom. We'll see how that goes.
You know, the more I read this post, the more it seems like a virus.
Man... just hard reset/flash a new rom and be done with it.
SH4YD33 said:
Man... just hard reset/flash a new rom and be done with it.
Click to expand...
Click to collapse
I thought the above was the reason we DIDN'T have WM viruses?
Virus + Hard Reset = Problem solved?
SH4YD33 said:
Man... just hard reset/flash a new rom and be done with it.
Click to expand...
Click to collapse
I agree, at least that way you know if its hardware or software related and you stop fighting a losing battle
MM
tsadek said:
I thought the above was the reason we DIDN'T have WM viruses?
Virus + Hard Reset = Problem solved?
Click to expand...
Click to collapse
That's why I haven't bothered with any of the anti-virus programs out there. Why bother having a constant drain on the system resources when you can do a hard reset, and restore all the cabs & hacks in under 30 minutes?
-Jay
Just an update here, my phone started acting up again ~5 days ago: freezing on incoming calls, not switching to landscape when sliding out the keyboard, never turning the screen off, etc. 3 days ago it got better, and I was able to run Sprite Backup and tried to restore the phone back to my pre-PointUI days. It had to reset, and on that same reset, Sprite didn't run -- the phone just booted into Windows, and all my problems came back.
Last night, I got a call that froze up my phone again. So I reset it, and by surprise, Sprite Backup ran and started restoring my phone. Now it's back to the way it was in January, and everything works perfectly! This backup was made before I ever installed PointUI.
Bottomline, no PointUI, no problem.
However, I should say that with v1.01b, I never experienced any of these issues. Because of my experience, I'm not giving any test versions a try, but I may install 1.03b, when it comes out. Definitely doing another backup before that too.
Thank you everyone.
Sounds to me more like a hardware issue, perhaps with your SD card.
I had the same issues you were havingh, but without ever having installed PointUi on my Kaiser.
I was using Dutty's Rom version 7 with radio 1.27.xx
only installed aps : TomTom and SPB brain training
So it would seem this is a WM or TomTom triggered issue....
My Kaiser just started doing this very same thing today. I'm running the standard AT&T WM6.1 ROM and have been successfully since December 07. I have a 6GB SD card with TomTom on it, also have had no issues until now. Today, the screen didn't switch into landscape upon sliding the keyboard out; the camera freezes and/or is unresponsive; power button doesn't work (on OR off; with or without SD card inserted); couldn't pick up a call earlier today; TomTom freezes when loading; WM player freezes while loading media.... I have not installed any apps on this thing since January. Seems to me like some memory corruption going on, possibly page file related.
I *did* notice that I had about 45MB worth of temp internet files cached and cleaned those up earlier today after these symptoms started. Didn't fix the problem though, but being low on main storage may have contributed to the corruption problem.
I had hoped I wouldn't need to hard reset my phone but here we go....

[Q] Please help: trackball constantly registering clicks even if not pressed

Hey guys
I tried to search but I haven't found anyone with this particular problem:
Today I had to swap the SIM card on my dad's N1. I must have touched something the wrong way since after doing so, it seems the trackball is constantly being pressed (even though it's not).
Here's some of the consequences of this, that are making me literally freak out:
1. I can't get into recovery (as soon as I do, a click is registered on "Reboot phone).
2. It only boots in safe mode
3. Navigating around the phone is almost impossible, opening up the app drawer immediately launches an app.
By hitting a text input field, I can observe how it's registering clicks really fast (by observing how the whole text field is selected/deselected)
I tried fiddling a bit with the trackball, long pressing it, clicking it, etc, but it's still a no go (long pressing it does register as a long press, but as soon as I let go, the constant clicking continues)
Seeing as how this happens whether or not after the ROM has booted, it looks like this is a hardware problem.
Has anyone run into something like this before? Any ideas on how to fix this myself?
I don't know if sending it to HTC is an option because of two reasons:
1. I live in Costa Rica, don't know if there's HTC support here, or if it'd be safe shipping the phone to the states for a repair.
2. My dad's N1 is rooted, but bootloader hasn't been unlocked. It's running a custom rom. Right now I'm not sure if I can't get it back to stock since I can't even get into recovery.
Please help! Thanks
I had this exact problem for about a day or so it turns out I had got the trackball wet try clicking it and rolling it also try giving it a day or two it might just come back good luck on your nexus
Sent from my Nexus One using XDA App
Turns out you were right!
I left it sitting for a day, turned it on and the problem was still there. I got a hair dryer and used it on the phone for like a minute, turned it on, and all is good now!
Thanks!
Problem has come back and won't go away now... definitely looks like a hardware issue, will call HTC support.

[Q] Foce close error all installed apps not showing 2nd time...

Hi,
I have a rooted GT-i9000m (bell Galaxy S Vibrant). I used the one click lag fix to root my phone and it works fine.
A few days ago out of no where all the apps started auto closing as soon as i opened them and then both the menu and back touch buttons lit up and the screen went black. I held the power down till it rebooted only to get and error with com.android.calendar even tho I never use the app. When it finish's booting none of my installed apps are showing.
The first time it happened with com.android.app and I did a full wipe and factory reset and just reinstalled everything.
Ideally I don't want to system reset to factory settings again and lose all my files and notes that i copied back on to the phone 2days ago...
Please note I have tried clearing the data for the calendar app in settings -> apps and i cleared the calendar back up. My problem is that none of my installed apps are showing...
(Update) I also cant reinstall or update apps due to a Installation error - Insufficient storage. But there's room on both SD cards. I also set 850mb for apps when i did the one click lag fix and i don't have 850mb of apps installed.
(Update 2) I did a factory reset again this time i didn't format the internal and external SD cards. (It works like new again) Thus I got to keep all my personal files and ring tones ect. The only thing that was deleted that I didn't back up is my Notes. This leads me to my new question whats best for backing up apps on a rooted SGS (bell Vibrant)?
If anyone has answers they would be much appreciated.
i had the same problem
install rom manager from the market place
there is a option in there "Fix Permissions" just run that and it will fix it up for you
only takes 1-2min to run
Tried what you said but i cant install anything... I get Installation Error - Insufficient storage available.
I now understand the cause of the problem. I change my battery once and some times twice a day. At first I would wait for the long shut down (untill the screen goes totaly black) and then take off the back and swap out the battery. At least 3 times the phone would boot up and ask me for the network unlock code (I bought the unlock code directly from bell for 75$). I found this rather annoying so i tried just taking the battery out wile it was on (idle) and it appeared to work flawlessly at least 20-30 times before the phone would start to do an endless force close loop cycle. This kept forcing me to do a factory reset on the phone. I can only assume the one click lag fix and my disregard for the need of the shutdown before removing the battery must be all the cause of my problems.
I will try and see if my phone is more stable with out the one click lag fix.
nope that is not the cause of the problem
but it sounds like you are another victim of the lag fixes that is killing your internal SD card.
not the fault of the lag fix, it just make the problem apear sooner than later
I have been having a similar issue and I'm using Voodoo lagfix. I think it's because I took the battery out before it had completely shut down.
read this
http://forum.xda-developers.com/showthread.php?t=793404
Well the phone bit the dust today. I opened up google maps to look up an address and it crashed with the usual error. So i rebooted the phone and now it stays stuck at the boot logo. (the glowing S with both touch keys staying lit) So i did the recovery thing again but this time I had to do the Vol-up + home + power in order to get the phone working some what. IDK but it wont let me log into my google account to sync my contacts. My APN settings are correct and working and I even tried off my Wifi at home. I'll just hope its a google problem and not my phone acting up. Thanks for the pointer to the bad internal SD. That may be the problem kinda hard to prove it to Samy thoe...
I get force close errors after about 4-7 days of use. Now its gotten worse. A few days ago I was looking up an address and my phone crashed and rebooted it self. It then hug at the S boot logo for 20mins. I got to my friends apartment building to find my phone still stuck at this boot logo. I couldn't remember his apartment number or buzzer code... Normally i just check my contacts list and buzz the code. I was standing out side in the Canadian fall cold wind trying to get this phone to work... OMG i almost just smashed it on the spot. Anyways I remembered about something i had read on this forum about the recovery mode ( i had used it to root ) so i tried that out got the little menu and tried every option before having to do the dreaded factory reset. Well nothing work with the exception of the factory reset it got my phone working in about 5mins... LOL
Anyways I thought I might try upgrading the firmware when I got home. What a mistake... I cant control my phones MP3 player via my bluetooth car stereo any longer. Tried everything even a factory reset and formatting the internal and external SD's. I tried running it with out rooting it again and with out the lag fix in hopes that I wouldn't get a force close error. Wouldn't you know it about 5 hours after the factory reset un-rooted just after i finish coping over all my music. I get a force close error! So I tried again and this time the phone ran for about 30hours before it started giving me force close errors about the email now...
Sigh I've tried just about everything in my power to make this phone work. So I assumed it must be the phone... I called Samsung up to get a RMA going... Wouldn't you know it they tell me that I have to call my carrier to get it RMA/repaired. I try to explain that I bought the phone with out a contract and bought the unlock code from Bell so I could use it on Fido. They tell me to call Fido... ROFL Fido wouldn't even give me their APN settings when i got this phone so knew they would be of no help. They don't even have one android phone in their line up i tell the sammy rep. So they tell me I should go back to the Bell store I bought it from to get it repaired/RMA'ed.
I doubt Bell will be of much help but here's hoping.
Do you think my phone is broken, bad flash, buggy memory, ect and needs to be RMA'ed?
Update...
I got my phone back from repairs 2 weeks ago. They flat out replaced the phone for a new one. This was a huge headache for me because the new one wasn't unlocked. Took Bell 2 hours to get the new one unlocked wile my wife waited out side double parked downtown! (I thought it would be a quick pick up and I would be out) The blue-tooth works flawlessly again!!
Much to my dismay the replacement phone has started acting up much like my first one did. It gets several force close errors a day and has gotten to the point where it no longer can send or receive text messages (using Handcent). The stock Music Player app also force closes at random with more frequently. It looks like I got another Lemon. This time around I did NOT root, lag-fix, or flash firmware. I will be sending it for repairs as soon as I can afford to buy another phone to use wile this one is off at repairs. My back up phone is a 3~ year old Iphone3g that my son has made his... (cracked screen, vol rockers dont work, power button is jammed in, the LCD screen it self is bleeding on the top edge)
The Vibrant never let me down other than as a phone. As a divx player or using all-share it rocks! I use these features A LOT to play my 720p divx movies on any TV or the projector in the bedroom .
with that being said I might keep the phone just as a portable movie player to bring from place to place and put my sim in something more stable.

[Q] Keyboard problem

My keyboard has started having problems. I hit 1 key and 3 other type and not what I hit. When I try to delete to correct then 7 or 8 other figures type out.
I have rebooted (cold restart) and still having problems.
Any suggestions besides wiping and reloading?
Thanks,
rljohnson said:
My keyboard has started having problems. I hit 1 key and 3 other type and not what I hit. When I try to delete to correct then 7 or 8 other figures type out.
I have rebooted (cold restart) and still having problems.
Any suggestions besides wiping and reloading?
Thanks,
Click to expand...
Click to collapse
You may try other keyboards. I was having the same issues with the GB board. Switched to swifkey. It is a paid app but I have no issues with it.
rljohnson said:
My keyboard has started having problems. I hit 1 key and 3 other type and not what I hit. When I try to delete to correct then 7 or 8 other figures type out.
I have rebooted (cold restart) and still having problems.
Any suggestions besides wiping and reloading?
Thanks,
Click to expand...
Click to collapse
Sounds like you got a dirty screen. Maybe a little speck you don't notice. I've had that before. Dampen a paper towel or cloth with water and give the screen a good once over. Finish off with a micro-fiber cloth, if you have one. That's what I do when what I touch isn't being recognized properly.
I installed a 'freebee' keyboard and that seemed to clear up some of the problems but it occasionally messes up. It is something I can live with till the next reflash.
Thanks all...
I was having the same problem and read somewhere that if your nook is charging by being plugged into the wall charger the keyboard acts crazy.
As long as I don't have it plugged in my keyboard is fine.
Keyboard will not display anymore (Clicked Gingerbread in settings)
I'm having an issue being able to get the keyboard back. While in the N.C. settings, i clicked on Keyboard to see what options were listed in there. There was Keyboard, and Gingerbread Keyboard as two options. i clicked Gingerbread but now do not see any keyboard come up on display when i click into any field that is editable.
Any ideas of how this is reset or reloaded to the normal keyboard? I am new with the Nook so i'm not real familiar (obviously).
thanks in advance.
Under apps go to NookColor Tools
then choose keyboard and go back to the regular keyboard
Thank you
Hey i just found the NookColor Settings, that is where i was, not the native settings menu. this allows the switch back to android keyboard..................
And i just saw the response above. Thank you as well for that!
Now if i can just get GMAIL to login for me. I believe there is a thread about getting rid of the cache from youtube and gmail (since i had already logged in under my name before the root that i performed, the NC isn't accepting the login it just returns me to sign-in / sign-up screen). If anyone has that in their memory please post the link, or i'll search around for it.
I didn't see this little fact posted so I'll do it. When you change the keyboard that you're going to use, and it's the first time entering text, do a long click on the text input window. It should come up with a pop-up window asking you which keyboard you want to use to enter the text.
Hope this helps.

[Q] Woke up to a less functional Captivate..

Long time lurker, first time poster.
I woke up today to see my captivate screen showing blank screen (active black screen with buttons lighted up) being unresponsive. It was on it's charger from the night.
I pulled the battery to shut it down. It rebooted. I thought nothing about it until I tried to use it about an hour later.
I have had it on stock Froyo, with no root. Never have flashed any other ROM besides updates through kies.
Problems and things I've noticed so far:
No puzzle lock screen. Can't find it under "set screen lock". Only None, Pattern, PIN, Password available.
Home button and search button do not function(they light up like they are pressed, but not action occurs in any apps or home screen).
No data. Usually i'd see edge or 3g, but I have no data connection.
Text messages wiped. None available through "Messages"(though call log shows history of messages).
Keyboard was on stock android rather than swype(since changed back to swype).
Holding power button only shows "Power off" option. Before there was at least Airplane mode.
GPS was on(I hardly ever use it).
Location settings seemed to be default("use wireless networks" was unclicked)
Most other settings/app data seems fine.
About phone info:
Model Number: SAMSUNG-SGH-i897
Firmware version: 2.2
Baseband version: I897UCKB1
Kerner version: 2.6.32.9
Build number: FROYO.UCKB1
Click to expand...
Click to collapse
Other related things:
Day or two before I received a text message from AT&T to download Kies and use Froyo(Don't remember exact wording, lost the text message, but something to the effect it looked like a mass mailing text to update to Froyo using Kies). I was already on Froyo(flashed as soon as I found out it was available few months back).
I also got a text message about downloading their at&t app to manage my minutes and pay my bill(also already had that app).
My Captivate would randomly freeze/unresponsive a few times, but I didn't think much of it.
Google Music app seemed to randomly start playing the audio file i paused(just in my pocket, or once when i put headphones in to make a call).
Searching the forums, haven't found too much related.
One thread suggested using "home switcher", which I have tried(both Froyo and regular versions, though can't press home button for Froyo version). Neither seems to know what my default Home App is, but it only sees TwLaucher(I only have TouchWiz).
Tried installing an alternative launcher(ADW,LauncherPro), still no home/search button.
I'm without my computer for the weekend, so I can't backup my files and reset to factory just yet.
Anyone have any thoughts to fix this or know what may have went wrong?
I might finally make the jump to a Custom ROM if it'll fix this.
Yes, you should either flash a custom rom or do a factory reset. I will say an event similar to this, also involving text messaging, is what made me make the leap to Assonance, and then Serendipity, and I haven't looked back.
Sent from a state of Serendipity
At the least, try a master reset.
You're not alone....
Two Saturdays ago, I woke up, grabbed my phone to see what time it was and my phone was going haywire. It as blinking, flickering and rebooted on its own a couple of times...without me touching it.
When I DID manage to access the phone after a reboot there was no connection. I couldn't call, send/receive texts, nor could I access most of the features (during one of the haywire moments, the phone popped open my "Gallery" folder and started running a slideshow and then shut down. Again, all without me touching it!) There was a distinct blue circle with a slash where the 3G bars used to be on the top right corner of the phone.
I did a factory reset and didn't help. Wiped everything off the phone, but the device was still going nuts.
I got the phone in mid-December and have absolutely pampered that thing. Never dropped, never scratched, never abused. So I was surprised when I took it into the AT&T replacement center that the lady told me that my battery was wet! Not the phone, but the battery. Those two white-that-turn-pink indicators are so close to each other on the phone that I can't see how one gets wet while the other doesn't.
So they give me a new phone. One thing I noticed right away was that my data usage went WAY UP with the new device. To put it in perspective, I used 100 mb of data in 29 days and 64mb IN ONE DAY with my new phone. I thought it may be a one-time fluke, but it's not. I am only 10 days into my new month and am already at 164mb out of 200mb in my plan. I have NEVER used 164 mb in the 6 months previous, let alone in 10 days.
Fun's not over yet. I noticed a lot of crashes and "Force Closes" with the new phone too. I didn't even have any apps downloaded yet and things were still crashing. Last night I pull my phone out to take a picture and...nope. Screen was all kinds of whacked out and it crashed. And still does now every time I open the camera function. I managed to get in camera mode fast enough to do a reset, but didn't work. The screen is fine otherwise. So looks like I'm back to A&T tomorrow for another round.
I'm glad you posted this, cause the same morning all this happened -- literally, within 10 mins of me waking up -- my computer (brand new - 2 days old) went berserk and shut off and my stereo started flipping channels, turning the volume, treble, bass up and down..BY ITSELF without me touching ANYTHING! It was pretty freaky. I wondered if I was struck by lightning the night before.http://media.xda-developers.com/images/smilies/eek.gif
I was finally able to get back home today and do a factory reset. This (somewhat) solved the problem. Everything is mostly back to normal(home button and search button work on home screen, lock screen is there).
Lost a couple of game saves as I had no method to pull a save file(was doing adb pull on some known file locations).
I did run adb logcat before resetting, and home button and search button seemed to trigger something, just not follow through(Search button did work in a card game as a forward button and home button worked in the kies app to exit, just never as a return to home button in apps).
I'll be looking to root and flash a custom ROM, especially root so I can do a proper backup in case anything like this happens again.
I just want to say thank you posting in q&a and doing research before and after your flashing started. Then searched after your problem. You're a new member of a breed that are few and far between. I will hit your thanks when I get on my computer, app doesn't have it. You will go far here.

Categories

Resources