Related
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
That really sucks...
nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
which rom did u flash it with ??? wat ver ur configs before that . ur ipl/spl version os and etc.
sometime it happens that the power button doesnt works ....
try poking the reset button wiz ur stylus ... press and hold for sumtime and c wat happens
if it starts then ... press it again and wen the screen goes blank pree the camera button and hold it ... ull get into the bootloader ... den connect da usb and flash a new rom or da old factry one ...
i use molski's rom its really stable
well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......
nicholas99 said:
well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......
Click to expand...
Click to collapse
did u try da soft reset ???
yes i did but nothing happen at all
Xda Neo
I have the same problem. IPL and SPL 2.15.00001 and tryed to downgrade but after restart it does not power on. Tried everything but no way to power on. Is somebody know how to make it work again.
Regards,
You guys tried to flash a G3 Rom on your G4 Wizard.
So your bootloader (IPL/SPL) that is 2.xx.0001 is overwritten by a G3 bootloader that is 2.xx, so in other words....your devices are bricked.
Please someone, correct me if I am wrong.
Molski
yup, I agree. Bricked hopefully someone can fine the JTag on these devices.
Wow that sucks! Full moon over Miami last night, naw that can't be it .....
Sorry but unfortunately I must follow my Grandmother's advice concerning when I don't have anything nice to say...
R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!
So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....
magicer said:
So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
Click to expand...
Click to collapse
a G4 has a .00001 on the initial splash screen.
ArtXT said:
R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!
Click to expand...
Click to collapse
The problem is that if your bootloader (IPL/SPL) is fuc*ed up, there is no way to get it in bootloader mode to do a flash!
Only known solution is with JTAG connector, but that solution is not a clear solution yet, but I dont know nothing about that solution (simply...because I never needed it).
Molski
Dr Puttingham said:
Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....
Click to expand...
Click to collapse
I knew I have a G4 and can't upgrade/downgrade with G3 roms or even change IPL/SPL, but I did that :]
Just found ROM v2.22.1 (I think), like my original Wizard's was. I was so happy that I found it, that I forgot about G3 chips existence 8)
Well, ROM was for G3 -_-
Just ran too fast and slipped. Maybe I got that speed after very often Pioneer BCT 1430 flashing. It is just immortal :]
well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.
nicholas99 said:
well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.
Click to expand...
Click to collapse
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...
Dr Puttingham said:
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...
Click to expand...
Click to collapse
...which is one of the reasons why carriers make it so hard to flash a ROM from one carrier to the device of another.
Qtek 9100 half bricked
Hi Molski
I'm new here.Just 'd like to know if you could support me on this matter.
Here we go...
I've flashed my 9100 from wwe to esn (spanish) with the ROM 1.3.7.5 or something like this.
This is the problem...I got a power failure in the middle of the flashing process.So now the device isnt able to start up it didnt install the OS properly.
Now it says:
IPL 2.24 (i managed to flash the ipl n spl)
SPL 2.24
OS 1.3.7.5
But I'm pretty sure that there's no OS watsoever because after keep trying flashing with other ROM in bootload mode.I finally managed with an Orange of 34 mb it updated the ROM,that is the IPL And SPL and with the process was running I've noticed the screen got blank and updated it properly.I was realy happy when I saw it but even though it did it properly I still got the same problem.The pda doesnt start up.When I flashed it for the first time I did it with care,followed all the instructions,that is, unlocked the CID first etc.But had the damn joy of getting a power failure in the middle of it.
I'm just wondering if one of you would be able to gimme a light on it.I've tried everything but flashing it with a G4 ROM coz I know it wont work.
Regards
Luiz Santos
Molski[/QUOTE]
can sum1 help me please..my wizard just freezed on the 3rd splash screen after a soft reset ..i dont want to do a hard reset just to make it workin again coz ol my files are in der..is there any way to make it work again without me having to hard reset the device????pleazzeee....help!!!!!
prettieh_meeh said:
can sum1 help me please..my wizard just freezed on the 3rd splash screen after a soft reset ..i dont want to do a hard reset just to make it workin again coz ol my files are in der..is there any way to make it work again without me having to hard reset the device????pleazzeee....help!!!!!
Click to expand...
Click to collapse
The extended rom of your phone seems to have gotten corrupted by too many installing/deleting applications or some or any essential OS files corrupt and not responding.You can try by switching OFF the phone and taking out the battery for a couple of minutes say 30 mins and then try again to switch ON the phone or try Soft reset,see if it works,otherwise try a Hard Reset.Hope it'll work,well if it still doesn't work,than the only way out is to reflash a new Rom.
Cheers !
actually i did sumthin..den it hard resets..nd then wen my phone is now workin..it can't recognize the storage card..so i have to hard reset again..i should've waited 4 d reply ..nwy, wat's the best rom out there?can u suggest sumthing?coz im currently on bd3.1..nd its not workin for me...it's always doin dat..tnx!!!
prettieh_meeh said:
actually i did sumthin..den it hard resets..nd then wen my phone is now workin..it can't recognize the storage card..so i have to hard reset again..i should've waited 4 d reply ..nwy, wat's the best rom out there?can u suggest sumthing?coz im currently on bd3.1..nd its not workin for me...it's always doin dat..tnx!!!
Click to expand...
Click to collapse
Which is the present Rom on it ? is your phone CID unlocked ? if its Cid unlocked then try new latest XMr5 or TNT 1933 series,both are excellent Roms.
Btw, which is your device G3 or G4 ? Post IPL/SPL...? of your phone,ok
Cheers!
IPL/SPL 3.08, OS 11.0.0.0, GSM 01.12.10..dis is the site i followed..http://forum.xda-developers.com/showthread.php?t=276963 ..im sori but im a noob..wat does r2sd all mean?i actually did dat..(i know, its not good to try things u dont know of..but ive learned my lesson..)where can i find the roms?can u pls tell me the thread?thanks for all ur help..
oh and btw, my phone is cid unlocked..nd currently on wm6..it actually destroyed my storage card..its not readable anymore..(no offense for d 1 who taught of it..)is der any way to revive it?
This is for ne one that is looking for detail in making their Wing/Herald hard spl'd
Please do not get mad at me if it does not work.. But there are a ton of success stories with flashing Wing/Herald to Hard SPL..
#1:
Ok first check your ipl and spl.. You can do this by entering bootloader. bootloader (push the pin hole right under volume slide and hold camera button) you will then enter bootloader.. It looks like 3 color bars and say's ipl 4.xxxxx whatever and spl 4.xxxxx same.. Whatever the 4.xxx is thats what ipl and spl you are.. In order to become hard spl you must at least 4. and higher.. So if you see a 4 then your good..
#2:
Ok now that we have checked, soft reset your phone again and let it load.. This will get you out of bootloader and back to normal mode.. I was very careful on flashing.. So i always reverted back to oem rom.. So get the oem Wing rom or Herald rom.. If you can't find it let me know because i have it.. So just flash oem and let it be stock rom..
#3:
Ok now is getting ready to start from the very beginning.. Now if you have the 3 cabs (canonyang.cab, aserpolicy.cab, disablesecurity.cab) just install them in order as writen . After they were successfully installed soft rest your phone again..
#4:
Ok now we start the flash.. Its a scary few moments lol.. But very worth it.. Make sure you are synced and connected to your comp.. I also was extra careful by resetting my comp and making sure all windows were closed and made it so windows weren't open.. But i was extra careful Check the circle and make sure its green or if you have vista it'll be the pda icon lite up.. now open your hard spl folder (the rar. or folder that you dl'd for from the main page) and click on ROMUpdateUtility. Now just wait for it to finish the flash.
- If all goes well then it will come up something like Yang something something.. You will see a dif splash due to you dl'ing a new rom that makes your phone hard spl'd. Let it finish and your good.. Soft reset and enter bootloader and see if spl is 4.70 yang.. If so congrats your hard spl'd!!!!!! fo sho...
* Now to flash other roms all you have to do is get your oem rom and right click on it.. Extract it and you will see its contents.. Among its contents delete the spl.nbh file. Not the ruu.nbh.. Now you click romupdateutility.. I would make the extracted oem a special folder because this is now your new flashcenter.. Ne time you would like to flash a new rom all you have to do is simply replace the rom .nbh of your liking in this folder that you made and run romupdate.. All done.. Easy flashing.. lol.. Welcome to hard spl world!!! Now you can flash at ease.. Ne Herald/ Wing rom you have is now flashable except roms designed for micro sd cards (trasflash cards) Just use the .nbh files..
Please if you are are not ok with my instructions and wish special help(detailed help) with this put it on this thread. Others will learn from others concerns.. Even if the ? has been asked a million times still ask.. Please ask ?'s before flashing if something does not go with instructions..
Once again i'm not responsible for ne thing that happens to your wing/herald.. I am simply trying to help in-detail and be at assistance in ne way possible..
This is the dl from the orginal Hard SPL page. It contains everything thing you need.. (cab. files, .nbh for flahsing and romutility for flashing)
Give credit to Papamopps's for starting the Hard SPL thread
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
This is the oem tmobile rom update:
http://rapidshare.com/files/148795008/TMo_Wing_RUU_Update_4.26.531.4.exe
Good manual! thanks!
ruebyi said:
Good manual! thanks!
Click to expand...
Click to collapse
no problem.. i had a friend in a dif thread needing help with hard spl and was looking for detail.. so here it is.. plus ill be as much support as i can be.
trust me if you follow those steps it will work and you will be on your way to great things
I have a question, I hard spl'd my wing before but since than I got another one since it broke. Do I have to install the cab files in a special order? It seems that I remember doing this in a special order before. I hope I did not over look this question in your thread. Good post by the way.
lmyers10 said:
I have a question, I hard spl'd my wing before but since than I got another one since it broke. Do I have to install the cab files in a special order? It seems that I remember doing this in a special order before. I hope I did not over look this question in your thread. Good post by the way.
Click to expand...
Click to collapse
On the original thread there is a specific order.. canonyang.cab, aserpolicy.cab, disablesecurity.cab.. I had a second wing and did not fallow this order.. i just did it from bottom to top in alphabetical order. i kinda didnt care with the second wing thou.. i would do as the first theard says.. i totally forgot that there is an order.. i will edit.. thanks..
iPhone iWing said:
On the original thread there is a specific order.. canonyang.cab, aserpolicy.cab, disablesecurity.cab.. I had a second wing and did not fallow this order.. i just did it from bottom to top in alphabetical order. i kinda didnt care with the second wing thou.. i would do as the first theard says.. i totally forgot that there is an order.. i will edit.. thanks..
Click to expand...
Click to collapse
I wasnt busting your chops ,just wanted to make sure I remembered right. I will be using your directions as a guideline as I am getting ready to hard spl my phone again.
lmyers10 said:
I wasnt busting your chops ,just wanted to make sure I remembered right. I will be using your directions as a guideline as I am getting ready to hard spl my phone again.
Click to expand...
Click to collapse
O no man i wasn't coming close to taking it like that.. It was a big reminder!! Thank you.. Like i said thou i didnt do them in order on my other wing and it worked without a prob.. But do as recommended now.. I put that they need to be in the order i have posted.. Thanks.. I hope your hard spl goes great!!!
fo_sho..
thanks these are great instruction.and i believe anybody should b able to hard spl afer reading these directions...but hey who knows
Thanks it worked perfect
Ditto here. Thank you very, very much. Good instructions!
One little thing: "aserpolicy.cab" is actually "ASerg Policies.CAB" and "disablesecurity.cab" is "Disable_Security.cab" in the OEM ROM you provided a link to.
I just got a used Wing off Ebay. My IPL is 4.10.0002 and my SPL is 4.10.0000 and when I try to HardSPL I get to where the progress bar is but then it says it can't communicate with my PDA/PHone and dies on me.
I installed the CAB files in the order stated then soft reset then ran the ROM UPdate Utility. ActiveSync is active but it says it can't communicate. Did I do something wrong?
Thanks for any help.
*** Edit*** Got this figured out. I needed to go to Settings->Connections->USB to PC and check the box for Advanced Communications then run the ROM Update Utility
Lance
I followed these instructions perfectly, I got the new "yang" splash, I checked the bootloader and it confirms the spl is 4.70 yang but when i soft reset to get out of the bootloader and try to start the phone up it says:
"Error-Device start up failed due to sudden loss of power. Please click Yes or No to continue."
But there wasnt a power loss, and it wont let me click yes or no. Anyone know what happened and what I should do?
EDIT: Never mind, I got it fixed.
chaotic646 said:
I followed these instructions perfectly, I got the new "yang" splash, I checked the bootloader and it confirms the spl is 4.70 yang but when i soft reset to get out of the bootloader and try to start the phone up it says:
"Error-Device start up failed due to sudden loss of power. Please click Yes or No to continue."
But there wasnt a power loss, and it wont let me click yes or no. Anyone know what happened and what I should do?
EDIT: Never mind, I got it fixed.
Click to expand...
Click to collapse
Maybe post how in case this happens to someone else?
iPhone iWing said:
This is for ne one that is looking for detail in making their Wing/Herald hard spl'd
Please do not get mad at me if it does not work.. But there are a ton of success stories with flashing Wing/Herald to Hard SPL..
#1:
Ok first check your ipl and spl.. You can do this by entering bootloader. bootloader (push the pin hole right under volume slide and hold camera button) you will then enter bootloader.. It looks like 3 color bars and say's ipl 4.xxxxx whatever and spl 4.xxxxx same.. Whatever the 4.xxx is thats what ipl and spl you are.. In order to become hard spl you must at least 4. and higher.. So if you see a 4 then your good..
#2:
Ok now that we have checked, soft reset your phone again and let it load.. This will get you out of bootloader and back to normal mode.. I was very careful on flashing.. So i always reverted back to oem rom.. So get the oem Wing rom or Herald rom.. If you can't find it let me know because i have it.. So just flash oem and let it be stock rom..
#3:
Ok now is getting ready to start from the very beginning.. Now if you have the 3 cabs (canonyang.cab, aserpolicy.cab, disablesecurity.cab) just install them in order as writen . After they were successfully installed soft rest your phone again..
#4:
Ok now we start the flash.. Its a scary few moments lol.. But very worth it.. Make sure you are synced and connected to your comp.. I also was extra careful by resetting my comp and making sure all windows were closed and made it so windows weren't open.. But i was extra careful Check the circle and make sure its green or if you have vista it'll be the pda icon lite up.. now open your hard spl folder (the rar. or folder that you dl'd for from the main page) and click on ROMUpdateUtility. Now just wait for it to finish the flash.
- If all goes well then it will come up something like Yang something something.. You will see a dif splash due to you dl'ing a new rom that makes your phone hard spl'd. Let it finish and your good.. Soft reset and enter bootloader and see if spl is 4.70 yang.. If so congrats your hard spl'd!!!!!! fo sho...
* Now to flash other roms all you have to do is get your oem rom and right click on it.. Extract it and you will see its contents.. Among its contents delete the spl.nbh file. Not the ruu.nbh.. Now you click romupdateutility.. I would make the extracted oem a special folder because this is now your new flashcenter.. Ne time you would like to flash a new rom all you have to do is simply replace the rom .nbh of your liking in this folder that you made and run romupdate.. All done.. Easy flashing.. lol.. Welcome to hard spl world!!! Now you can flash at ease.. Ne Herald/ Wing rom you have is now flashable except roms designed for micro sd cards (trasflash cards) Just use the .nbh files..
Please if you are are not ok with my instructions and wish special help(detailed help) with this put it on this thread. Others will learn from others concerns.. Even if the ? has been asked a million times still ask.. Please ask ?'s before flashing if something does not go with instructions..
Once again i'm not responsible for ne thing that happens to your wing/herald.. I am simply trying to help in-detail and be at assistance in ne way possible..
This is the dl from the orginal Hard SPL page. It contains everything thing you need.. (cab. files, .nbh for flahsing and romutility for flashing)
Give credit to Papamopps's for starting the Hard SPL thread
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
This is the oem tmobile rom update:
http://rapidshare.com/files/148795008/TMo_Wing_RUU_Update_4.26.531.4.exe
Click to expand...
Click to collapse
Awesome. I was worried about doing this because everything seemed out of date and etc on here but I figured the hell with it, it's been months and so many hours this week and it worked. Thanks. I was a little worried about the spl because it looked like an older version and said wm6 and not 6.1. Well everything worked out great, thanks for this. After hours and days of reading every thing I could, this was the only that did not leave me with too many unanswered questions making me worried about doing this.
*UPDATE* So I I did another one today (or tried) and kept getting that 260 error and don't know why yet (I know; it is some place in the forums) and after having it do it about 5 times I checked (unlike you said to) and it never updated the spl etc I was in a hurry but I don't think the error was my fault. But now I have a question: What exactly are the 3 cab files for? At first I thought that was what did the hard spl but then after doing it and reading this again (I learn by doing not reading) I realizied it is not. And second question is: Why does it have to be flashed with that ROM to hard spl it?
apathetic said:
Maybe post how in case this happens to someone else?
Click to expand...
Click to collapse
It did allow me to click yes, I was just trying to touch the yes with my stylus but I had to click the left soft key. I dont know what caused the error but it seems to be working fine now and Ive successfully flashed 4 different roms.
chaotic646 said:
It did allow me to click yes, I was just trying to touch the yes with my stylus but I had to click the left soft key. I dont know what caused the error but it seems to be working fine now and Ive successfully flashed 4 different roms.
Click to expand...
Click to collapse
Oh ok. I did 3 today and still did not see that (tg)
Hi!
Thanks for all the explanations.
My IPL is 4.18.0002 and SPL4.18.0000.
My phone is locked by a brazilian cell commpany TIM. Do I need to unlock my herald before to do a hard spl?
Thanks in advance
Gorbo
Hi Gordo, I am from Porto Alegre too and I hard-spled ok here.
You dont need to unlock before to do a hard spl.
Thanks.
apathetic said:
Maybe post how in case this happens to someone else?
Click to expand...
Click to collapse
I have done the same yesterday ... the thing was I've forgot the storage card in the phone. There was mess of previous installation (mostly WM5). Today I've made clear installation of the official WM6 with the card out of slot. It is working perfect now.
just baught it, it worked fine.. then i tried to install HARD SPL, my computer froze and restarted.. i tried to do it again.. did the same..
so then i tredi to install a rom ( probs a stupid idea).. it loaded up to 100% then told me the rom was corrupt! and it refused to get out of the triband bootloader screen!.. i tried to hardreset it.. stayed in bootloader screen.. tried doing hardSPL again.. gave me erros, and asked me to do a recovery.. didn;t work.. tried to re-flash the rom.. no luck..
then i tried mtty, followed the commands given.. this time it reset and got to the roms loading screen.. but doe snot load past there..
now.. it wont detect USB wont load... nothing.. hard reset doesn;t work..
wheni connect usb cable it comes up with an orange light..
PLEASE !HELP!!!! :'( :'(
What OS are you running?
I had to use XP to unlock my phone. If all else fails, you should have a 1 year manufactures warranty on the phone. Just call them and say this thing 'just stopped working' and cross your fingers.
running xp.. the warranty it void... if anyone has any idea.. PLEASE HELP!! :'(
http://forum.xda-developers.com/showthread.php?t=423486
wish you a good luck!
I can't help you ,
wish you!
ardley216 said:
just baught it, it worked fine.. then i tried to install HARD SPL, my computer froze and restarted.. i tried to do it again.. did the same..
so then i tredi to install a rom ( probs a stupid idea).. it loaded up to 100% then told me the rom was corrupt! and it refused to get out of the triband bootloader screen!.. i tried to hardreset it.. stayed in bootloader screen.. tried doing hardSPL again.. gave me erros, and asked me to do a recovery.. didn;t work.. tried to re-flash the rom.. no luck..
then i tried mtty, followed the commands given.. this time it reset and got to the roms loading screen.. but doe snot load past there..
now.. it wont detect USB wont load... nothing.. hard reset doesn;t work..
wheni connect usb cable it comes up with an orange light..
PLEASE !HELP!!!! :'( :'(
Click to expand...
Click to collapse
You are first going to have to determine if your phone is truly unlocked.
I am not sure that you phone is bricked. But it does sound like you are going to have to be creative to undo what you have done. If you are able I would suggest flashing hardSPL via SD. Please go here: http://forum.xda-developers.com/showthread.php?t=433835
ok i'll try this now.. can someone tell me what i need to do after this if it fails??? desperate here ..
thanks so far!!
ardley216 said:
ok i'll try this now.. can someone tell me what i need to do after this if it fails??? desperate here ..
thanks so far!!
Click to expand...
Click to collapse
One step at a time. You might have to get a card reader to load the microsd, they make adapters for them to fit a standard SD slot, plug it into your USB and load into it.
yeah.. i happened to lose my adapter as soon as i need it.. i have a hermes. can i run the software through that???
thanks
ardley216 said:
yeah.. i happened to lose my adapter as soon as i need it.. i have a hermes. can i run the software through that???
thanks
Click to expand...
Click to collapse
you should be able to load the software onto your SD card via the hermes. Once have done this you can then move the SD card over to your tilt and go from there. It's very important that you take your time and read the instructions. This is one time that you dont want to rush through them.
ok so i tried to follow the microSD card flashing method.. i dragged and droped the nbh file ( it was renamed) to the card.. put it in my kaiser.. held power button and camera button.. went to the tri coloured screen for about 2 seonds now its got a white screen just saying "Loading..." does this just mean its loading the rom??
thanks
an hour and half later.. still the same screen... is this phone bricked...?
ardley216 said:
an hour and half later.. still the same screen... is this phone bricked...?
Click to expand...
Click to collapse
ITS NOT BRICKED!!! If you are seeing any screen at all it is not bricked. if the rom is not flashing or having trouble, double check the hardspl. And lastly, when was the last time you wiped?
Hi all,
have some problem with T-mobile G1.
In first, its not mine, but my friends.
He was trying to do ROOT + flash eclair rom.
But he was unsuccesfull.
I tell him, I will write here and maybe, if all goes fine, repair his G1.
I realy dont know, what all he was trying with it.
But when i get it to my hands G1 was stucked on showing logo T-Mobile G1.
So where can be problem? And how can i repair it? )
Now Im going to read all forums about G1, cuz I have it in my hands for first time.
So if anybody can help i will be happy )
MiTMaNeK said:
Hi all,
have some problem with T-mobile G1.
In first, its not mine, but my friends.
He was trying to do ROOT + flash eclair rom.
But he was unsuccesfull.
I tell him, I will write here and maybe, if all goes fine, repair his G1.
I realy dont know, what all he was trying with it.
But when i get it to my hands G1 was stucked on showing logo T-Mobile G1.
So where can be problem? And how can i repair it? )
Now Im going to read all forums about G1, cuz I have it in my hands for first time.
So if anybody can help i will be happy )
Click to expand...
Click to collapse
I can help, but need more info. Tell me about the process you used to root and flash.
What happens if you turn on the phone while holding down the home button?
How about if you power on while holding the camera button?
I can help, but need more info. Tell me about the process you used to root and flash.
Click to expand...
Click to collapse
In first, thx for answer
What I know(I asked owner of this bricked G1):
1)He make ROOT with GoldCard
2)After that he flash SPL
3)Flash this ROM: http://forum.xda-developers.com/showthread.php?t=598973
But not working, so he made point 2 and 3 again .. still dont work.. dont know if he tried it again..
What happens if you turn on the phone while holding down the home button?
How about if you power on while holding the camera button?
Click to expand...
Click to collapse
nothing =(
EDIT : Its realy firts time when I got Andorid phone in hand, I can repair bricked Raphael, but I realy dont know what with this and what all i need in my computer.
MiTMaNeK said:
In first, thx for answer
What I know(I asked owner of this bricked G1):
1)He make ROOT with GoldCard
2)After that he flash SPL
3)Flash this ROM: http://forum.xda-developers.com/showthread.php?t=598973
But not working, so he made point 2 and 3 again .. still dont work.. dont know if he tried it again..
nothing =(
EDIT : Its realy firts time when I got Andorid phone in hand, I can repair bricked Raphael, but I realy dont know what with this and what all i need in my computer.
Click to expand...
Click to collapse
I am guessing they flashed Haykuro's special (i.e. danger or death spl) since they wanted an eclair ROM. Furthermore, I am guessing they did not flash the updated radio before the SPL?
Either way, since nothing happens when holding home, or camera, I am sorry to say you have a brick.
Thx )
Yea, I know, its a brick, while Im reading all forums about bricked G1... but there must be way how to repair it =D
MiTMaNeK said:
Thx )
Yea, I know, its a brick, while Im reading all forums about bricked G1... but there must be way how to repair it =D
Click to expand...
Click to collapse
As of yet your options are to send it to HTC to have it fixed, replace the motherboard, or follow this thread
http://forum.xda-developers.com/showthread.php?t=591048
Maybe these guys will figure it out.
Thx for this link, Its last hope for my friends G1 =), or buy used broken G1 with good motherboard =)
In all the cases I've read about if you can't access bootloader and recovery then your phone is bricked for good, but if you can access at least one of them your phone can still be fixed
Its fully bricked. So Power+ Cam and Power + Home dont work, maybe they found the way how to repair it )