Hi.
I've had nothing but trouble trying to figure this one out. Information is quite lacking, and no amount of thread searching or google searching is helping me.
I've previously had my DU rom build working fine, until I had to reinstall Linux that is. Since that point, I can build the complete rom, but kernel gen always hangs on building the dt.img.
Mostly, and only, because the build doesn't seem to actually build the DTB files? Are these supposed to be generated by the build environment?
For now I've just pulled the DTBs from the Sony git, and copied them to the "out" dir in the relevant place. But it would be nice to figure what I've done wrong.
Cheers!
including this commit in my sources caused the same error while building SlimKat:
http://review.cyanogenmod.org/#/c/74677/
if you have it in your rhine-common tree, try to revert it then build.
Regards,
Omar.
OmarEinea said:
including this commit in my sources caused the same error while building SlimKat:
http://review.cyanogenmod.org/#/c/74677/
if you have it in your rhine-common tree, try to revert it then build.
Regards,
Omar.
Click to expand...
Click to collapse
I think that's got it. How in the world I missed that, I'll never know.
Thanks for your help, it's much appreciated.
Hello, I am trying to compile the OmniROM for janice, Everything looks good, but at the end of compilation an error occurs.
See the image : i.imgur.com/XvWoKDS.png
Apparently the error is time to compile the files from TWRP. Problably some configuration is missing in the device tree.
I searched for this error and can not find much useful stuff on it.
Someone with experience can help me in this matter? @diego-ch @AntaresOne @golden-guy
Hi All,
I have been building permissive kernels for my own use for a while now, but the Note 5 kernel (both the "C" and "I" versions from Samsung open Source) is giving me fits. As you can see from my terminal output, I get through the creation of the image, the modules build fine, but when the firmware install makefile starts, I get an error I've never seen before, even if I have made no changes at all to the source code:
Code:
OBJCOPY arch/arm64/boot/Image
GZIP arch/arm64/boot/Image.gz
Building modules, stage 2.
MODPOST 2 modules
CC net/ipv4/tcp_htcp.mod.o
LD [M] net/ipv4/tcp_htcp.ko
CC net/ipv4/tcp_westwood.mod.o
LD [M] net/ipv4/tcp_westwood.ko
[B]/home/parallels/ANDROID/KERNEL/920c_kernel/scripts/Makefile.fwinst:45: target `/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule[/B].
I have looked at the cited section code, but don't see anything obvious. I have also google searched for this error way too thoroughly and PM'd some who have successfully compiled this kernel, but alas...
I am running Ubuntu 14.04 via Parallels on a Macbook Pro running Yosemite. As noted above, I am compiling from the Samsung OpenvSource files for The 920I and have also tried the 920C version, as well. As for toolchains, I have tried the Android NDK aarch64 4.9 toolchain, linaro aarch64 4.9 and linaro aarch64 5.2, all to no avail. I have tried make clean, make mrproper, deleted .ccache, etc., as well as using/not using -jX.
Here is a link to a repo with the untouched source code: https://github.com/sk806/N5_Kernel.git
ANY HELP IS GREATLY APPRECIATED!!!
Thanks!
Steve
sk806 said:
Hi All,
I have been building permissive kernels for my own use for a while now, but the Note 5 kernel (both the "C" and "I" versions from Samsung open Source) is giving me fits. As you can see from my terminal output, I get through the creation of the image, the modules build fine, but when the firmware install makefile starts, I get an error I've never seen before, even if I have made no changes at all to the source code:
Code:
OBJCOPY arch/arm64/boot/Image
GZIP arch/arm64/boot/Image.gz
Building modules, stage 2.
MODPOST 2 modules
CC net/ipv4/tcp_htcp.mod.o
LD [M] net/ipv4/tcp_htcp.ko
CC net/ipv4/tcp_westwood.mod.o
LD [M] net/ipv4/tcp_westwood.ko
[B]/home/parallels/ANDROID/KERNEL/920c_kernel/scripts/Makefile.fwinst:45: target `/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule[/B].
I have looked at the cited section code, but don't see anything obvious. I have also google searched for this error way too thoroughly and PM'd some who have successfully compiled this kernel, but alas...
I am running Ubuntu 14.04 via Parallels on a Macbook Pro running Yosemite. As noted above, I am compiling from the Samsung OpenvSource files for The 920I and have also tried the 920C version, as well. As for toolchains, I have tried the Android NDK aarch64 4.9 toolchain, linaro aarch64 4.9 and linaro aarch64 5.2, all to no avail. I have tried make clean, make mrproper, deleted .ccache, etc., as well as using/not using -jX.
Here is a link to a repo with the untouched source code: https://github.com/sk806/N5_Kernel.git
ANY HELP IS GREATLY APPRECIATED!!!
Thanks!
Steve
Click to expand...
Click to collapse
That is Samsung for ya. Maybe @g.lewarne could provide some insight
mikeyinid said:
That is Samsung for ya. Maybe @g.lewarne could provide some insight
Click to expand...
Click to collapse
I hope so! Thanks.
It's weird, as i've gotten the same error on both a virtual box and parallels setup. I am going to try boot camping it and then I'm done, unless someone knows what is going on.
sk806 said:
I hope so! Thanks.
It's weird, as i've gotten the same error on both a virtual box and parallels setup. I am going to try boot camping it and then I'm done, unless someone knows what is going on.
Click to expand...
Click to collapse
Have you resolved this issue? I am running into it too trying to compile S6 Kernel for 5.1.1
elesbb said:
Have you resolved this issue? I am running into it too trying to compile S6 Kernel for 5.1.1
Click to expand...
Click to collapse
I haven't. I can get every kernel to compile for my current devices, except this one. Strange.
sk806 said:
I haven't. I can get every kernel to compile for my current devices, except this one. Strange.
Click to expand...
Click to collapse
It is related to modules compiling from what I can gather. If I use Ktoonsez source, I don't get that error. However, I notice it doesn't compile any modules. I still get an Image in my boot directory. Do you? I think the kernel itself is safe to use. You could probably ignore this error.
You guys just need to read what the error exactly refers to and then search for it in your source.
Would have brought you to. ....
https://github.com/UpInTheAir/SM-N920/commit/ad77e0333fbdccf5e0e1485e5a65ae47a062b235
Easy
UpInTheAir said:
You guys just need to read what the error exactly refers to and then search for it in your source.
Would have brought you to. ....
https://github.com/UpInTheAir/SM-N920/commit/ad77e0333fbdccf5e0e1485e5a65ae47a062b235
Easy
Click to expand...
Click to collapse
I don't have anything like that in my makefile.fwinst file. Here is what is at line 45, which is where terminal is telling me the error is at:
$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %)
$(call cmd,install)
Here is the actual terminal error message:
/home/seth/S6-Kernel_Parent/Extracted_S6_Source/Kernel.tar/scripts/Makefile.fwinst:45: target `/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule.
So I'm confused.
EDIT: Nevermind I'm an idiot. I found it. Thank you so much!! Finally solved
UpInTheAir said:
You guys just need to read what the error exactly refers to and then search for it in your source.
Would have brought you to. ....
https://github.com/UpInTheAir/SM-N920/commit/ad77e0333fbdccf5e0e1485e5a65ae47a062b235
Easy
Click to expand...
Click to collapse
HA! I googled the error a million times and never saw your repo! I wasn't sure if removing "stm_z1.fw tsp_stm" from the makefile would screw anything up, but apparently it doesn't. Many thanks, sir!
It's odd that others have built with the same sources (920C, mainly, from what I have seen), and have not changed that section of the makefile, but still succeeded in their build. I wonder what it is about my setup that caused this error. Anyway, not an issue now. Thanks again.
Steve
sk806 said:
HA! I googled the error a million times and never saw your repo! I wasn't sure if removing "stm_z1.fw tsp_stm" from the makefile would screw anything up, but apparently it doesn't. Many thanks, sir!
It's odd that others have built with the same sources (920C, mainly, from what I have seen), and have not changed that section of the makefile, but still succeeded in their build. I wonder what it is about my setup that caused this error. Anyway, not an issue now. Thanks again.
Steve
Click to expand...
Click to collapse
There are others I've seen using my commit (no credit) and didn't cherry-pick keeping the history. I believe the Image still flashes with or without though
I am having the same issue can you explain what was the issue ?
UpInTheAir said:
You guys just need to read what the error exactly refers to and then search for it in your source.
Would have brought you to. ....
https://github.com/UpInTheAir/SM-N920/commit/ad77e0333fbdccf5e0e1485e5a65ae47a062b235
Easy
Click to expand...
Click to collapse
I have the same problem as OP with my S6. This link would help me but it is broken. Can you please provide some info about the commit or another link or whatever?
elesbb said:
I don't have anything like that in my makefile.fwinst file. Here is what is at line 45, which is where terminal is telling me the error is at:
$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %)
$(call cmd,install)
Here is the actual terminal error message:
/home/seth/S6-Kernel_Parent/Extracted_S6_Source/Kernel.tar/scripts/Makefile.fwinst:45: target `/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule.
So I'm confused.
EDIT: Nevermind I'm an idiot. I found it. Thank you so much!! Finally solved
Click to expand...
Click to collapse
Can you tell me what you did? I have the same error and i cant fix it ????
minealex2244 said:
I have the same problem as OP with my S6. This link would help me but it is broken. Can you please provide some info about the commit or another link or whatever?
Click to expand...
Click to collapse
Did you figure it out?
EncryptedCurse said:
Did you figure it out?
Click to expand...
Click to collapse
Uhm somehow. I used a script which ignored that error as your kernel image is already built and you shouldn't care about modules. But if you still want a fix then see my commit: https://github.com/minealex2244/AldeXus/commit/e89301766b3d251b285649a38ee4dea4f2871b99
This commit shows you what to remove (it may be the perfect fix or just an example of what you should do in your code).
Tell me if it helped.
Broken link
Hey, I'm having the same issue but I can't find your commit, could you please fix the link?. Thanks in advance.
Hello I´m trying to build an APP called zoomgesturetile from the authors GitHub. But when I want to build the APK, I get this Error:
Something wrong with the Maven Repository I guess. I never used Android Studio, so it would be nice if someone could help me out here, or may look into the code if he or she can compile it.
Thank you for your help