Database Develop

Please help me

I just install the coustom frimware ( r2-update-galaxys-modacocustomcustomrom-signed) and after finishig install it's rebot and stuck on the logo of Samsung i hear the sound of startup but it's still hang on the logo of Samsung please help me i dont know much about it..

1: let it boot, can take some time (5 min) at first boot

it's take more then 15 mintues but nothingjust in the logo of samsung what should i do now??

Take out battery, hold down volume up and home key while u power up.
Make a factory reset and restart again
Take out sd-card first tho.

Do it but same thing still the logo of samsung

What base rom did you have when you flashed Modaco r2?

i had arabic base room after that i put update of mode RC in device and install it so then its appear like that hang on Samsung logo

osasih said:
i had arabic base room after that i put update of mode RC in device and install it so then its appear like that hang on Samsung logo
Click to expand...
Click to collapse
http://android.modaco.com/content/s...rom-for-samsung-galaxy-s-with-online-kitchen/
"Requirements
In order to use this ROM on your device, YOU MUST ALREADY BE RUNNING THE JG1 ROM FROM HERE. Do NOT use this ROM with any other base, unpredictable things will happen, the most likely being you'll have to reflash your device via Odin."

And why use Modacos' rom?
This is better
http://forum.xda-developers.com/showthread.php?t=725194

so what i have to do now how i could go back or use any rom? and how

http://forum.xda-developers.com/showpost.php?p=7152078&postcount=2

is this useful and guide and thanks bro for the help thanks again

Still same the site that u gave the same instruction i do it but the problem is the logo of Android installation in mobile it appear it remain in the recovery mode and.
I add the CSC and PDA and Phone in Odin when i start it just analysis the file and so on not work

i download the file from https://www.wuala.com/Samsung Galaxy S/Firewares
frimware I9000XWJG1 and CSC CODE MODEM

osasih said:
i download the file from https://www.wuala.com/Samsung Galaxy S/Firewares
frimware I9000XWJG1 and CSC CODE MODEM
Click to expand...
Click to collapse
Ok. Follow these steps EXACTLY:
1. Make sure you have odin, the I9000XWJG5 firmware and the file that ends on "512.pit".
2. Reboot your PC.
3. Disable your antivirus, firewall and all similar programs!
4. Reboot your PC again.
5. Run odin directly after boot!
6. Select the files in odin.
7. Take the battery out of your phone.
8. Put it back in and press "volume down"+"home"+"power"
9. Connect your phone to your pc via usb cable and wait for odin to recognize it.
10. Press start in odin.
11. Wait!
Do these steps exactly in this order and you should be fine.
Sent from my GT-I9000 using XDA App

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL] Uploaded with ImageShack.us[/IMG]

Uploaded with ImageShack.us
Uploaded with ImageShack.us

just like that hang in recovery and the odin just analysis the files

osasih said:
just like that hang in recovery and the odin just analysis the files
Click to expand...
Click to collapse
Tick the "Repartion, Auto reboot and F.reset time" checkboxes.
Use the attached PIT file.
(remove the zip extension)

the attach file is courrpt.....and i donwload it and it gave error

[Q] ICS: back to stock?

Hi,
Can anyone tell me how to go back to gingerbread with Odin or Heimdall?
I'm on SGSICS (4.0.3) ROM, with ICS Semaphore Kernel.
(Don't say -search it on youtube- )
Please make it easy to understand, thanks!

Search on YouTube, xda or google!
Seriously though there is loads of info about this.
Make sure kies is off.
Get Odin. Get pit 512.
Get stock ROM from Samfirmware. One with the three files. Phone, pda, csc..
Now start Odin. Select all four files.to the correct spot. Pit in pit, csc in csc etc. check re-partition
Once selected start phone in download mode. (power button, home button and volume down on my phone)
Connect phone to PC.
When Odin is ready hit start.
Phone should now reboot.
I have found occasionally phone doesn't boot at this point. This is no problem.
Repeat process. This time don't use pit file and make sure repartition is not checked. (use only phone, pda, csc)
This time everything should work.
Also do factory reset here and clear cache.
Sent from my GT-P7500 using xda premium

google
search youtube and google

Thanks
scubadude said:
Search on YouTube, xda or google!
Seriously though there is loads of info about this.
Make sure kies is off.
Get Odin. Get pit 512.
Get stock ROM from Samfirmware. One with the three files. Phone, pda, csc..
Now start Odin. Select all four files.to the correct spot. Pit in pit, csc in csc etc. check re-partition
Once selected start phone in download mode. (power button, home button and volume down on my phone)
Connect phone to PC.
When Odin is ready hit start.
Phone should now reboot.
I have found occasionally phone doesn't boot at this point. This is no problem.
Repeat process. This time don't use pit file and make sure repartition is not checked. (use only phone, pda, csc)
This time everything should work.
Also do factory reset here and clear cache.
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
THIS IS WHAT I WAS LOOKING FOR
I did search on the internet, but I wasnt absolutely sure about the steps
Thank you.

No problem
Sent from my GT-I9000 using xda premium

pixelexip said:
THIS IS WHAT I WAS LOOKING FOR
I did search on the internet, but I wasnt absolutely sure about the steps
Thank you.
Click to expand...
Click to collapse
This guide will walk you through the process of installing a stock ROM on your phone.
Do this at your own risk, I'm not responsible for any bricks.
1. Things you need to read first before attempting anything:
Keep the phone properly connected to the PC!
This guide is only for those with a Samsung Galaxy S GT-I9000 (International version).
Before continuing, make a backup of all your data.
If the phone gets stuck at the boot screen, try doing the procedure again..
2. Download the following files
A Stock ROM/Firmware file.many available here : http://forum.xda-developers.com/showpost.php?p=14273101&postcount=1 (and also more detailed
instructions and videos)
A .pit512 file : from link above also.
The Galaxy S Drivers
These are probably already installed on your PC (if you have Kies installed). But if not, download here.
Windows [32 bit]:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Windows [64 bit]:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
ODIN v1.3.
This is the program you'll use to put the stock firmware on the phone.
INSTRUCTIONS:
1. Make sure you have extracted the contents of the Firmware, .PIT and ODIN rar files to a folder.
2. Turn off your phone and boot into the Download Mode (Volume DOWN+Home+Power Button).
3. Start ODIN. Then connect the phone to the computer. ODIN will say 'Added!'.
4. Tick the Repartition option
5. Then, in ODIN, select the following files in .pit, PDA, CSC and PHONE
a) .PIT: s1_odin_20100512.pit
b) PDA: PDA_JS7.tar.md5
c) PHONE: PHONE_JPY.tar.md5
d) CSC: CSC_XEE_JS1.tar.md5
The stock rom you choose will maybe differ from the above( stock ROM (XWJS7 2.2.1)but just make sure that PDA PHONE CSC of your firmware are in the same places .
Check screenshot below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Now, click on Start.
7. When it's done, the progress bar in the top left will say PASS, and the phone will reboot. You can now disconnect the phone from the computer.
NOTE: If something goes wrong, your phone might show the following image:
http://3.bp.blogspot.com/_Jv7eyrf0N...px-Samsung_Galaxy_S_Black_Screen_of_Death.jpg
DON'T PANIC! This happens sometimes if there is a USB connection error.
Disconnect the phone from the PC, close ODIN, remove battery for 5 minutes, reinsert it, turn phone on in Download mode again, and do the procedure again from Step 2.
That's it. You are now on stock ROM
guide originaly posted by addicted2088 in the Darky rom so thanks to him

even better
Thank you, this is even better.
Do you know if i'll keep the ClockWork Recovery? :S

You could download a pre rooted "stock" rom to keep cwm.
Sent from my GT-I9000 using xda premium

Nice guide! Thx
Sent from my GT-I9000 using XDA App

Ok, I say because after i rooted the phone I had to install CWM via Odin

[SmartFlash] Flashing BaseBand with multiple files

Lately the Band Base are composed of 4 files, and most don't know as flashing, some say that we select the file may weight, but I found a very easy way to Flash this type of Base Band.
IMPORTANT
SmartFlash program deletes entirely the phone's memory, so if you don't want to lose information, data, forums, contacts, msm, WhatsApp talks, music, videos, etc., copy everything to the external SD or PC should do!
Click to expand...
Click to collapse
-First of all remove the battery to the phone and while you press the key Vol- connect the USB to PC, once the image below appears we release the key of Vol-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Second need the program SmartFlash for Windows (at the moment for Linux there is nothing, but have been flashing since VirtualBox without problems), can download you it from here: SmartFlash_and_driver.rar - 8.4 MB
-Run SmartFlash and a window will see us like this:
-Let the window by default [Normal D/L]
-Click on [ADD] and here appears the file browser, look for the container folder of the BaseBand that previously we have achieved.
-Select the 4 files with the extension .fls and click on [Open]
-You have to see something very similar to this image:
-Click on [Start] and it will start flashing the BaseBand.
To been easy right?, is that when you know it is easy
Here you will find different BaseBand [Baseband][P990] Complete Baseband overview thread
Click to expand...
Click to collapse
Source of message in Spanish: todomovillg.es
Click to expand...
Click to collapse

i never tried that, but flashing all from biggest to smallest works fine too

No worry about the order, SmartFlash knows how to do it.
Look like I have selected them and ordered how alone

Nice posting, all 4 in one operation, wasn't aware, thanks
Sent from latest Django Manouche with latest Spica Kernel

My phone is not showing the image on the first picture. I updated my baseband before and everything went OK, but now I don't know whats going wrong, I press VOL-, plug the cable, LG logo shows up, capacitive buttons flashes and the phone turns off.
Edit: I put the battey back and my phone entered in CWM
I just turned off and tried again and entered in SW Upgrade.

tonyp said:
Kostja_V already sent me a PM a couple days ago that it's possible to flash a bb which consists of 4 fls files in one step with this method. Was planning to include that in the next update of the Complete Baseband Overview Thread.
But a very nice guide with screenshots, I'll link it in my thread if you want. You could expand it with screenshots for the normal flashing of a single fls file, then it's an awesome all in one screenshot thread
Oh I think you should request to move it from the development to the general section though.
I can contact the forum mod for you with that request if you want.
Sent from my LG-P990 using XDA
Click to expand...
Click to collapse
No problem, you can use the images, text, or everything, and if you want I can do tests once finished with the ROM 1.4.4 Opti-3D to CWM.
The good thing about SmartFlash is that the program knows the order of flashing, reminds me a lot to FlashTool for Infineon.

F. Gacrux said:
My phone is not showing the image on the first picture. I updated my baseband before and everything went OK, but now I don't know whats going wrong, I press VOL-, plug the cable, LG logo shows up, capacitive buttons flashes and the phone turns off.
Edit: I put the battey back and my phone entered in CWM
I just turned off and tried again and entered in SW Upgrade.
Click to expand...
Click to collapse
Press the volume down (on the right side) and let not go, now while you have pressed connect the USB cable to the PC, and not let go of the key, will be the LG logo and a few seconds will be the Upgrade screen, now as you release the volume key.

[Q] Problem with bootloader Galaxy Tab P1000 internal memory corrupted

Hi,
Sorry for my english first.
I have Galaxy Tab GT-P1000... and problem.
My device have corruped internal memory. Problem with flash hidden.rfs and movinand.mst, and samsung logo loop.
At first I try to flash with Odin3 and stock firmware 2.3.3 and I see it's make no diffrent. Try second time this same and I see logo screen with mobile, PC and exclamation mark between.
I use OneClikLoader and I can go on Downloading Mode.
After that I read how to fix problem with internal memory and use only external sd card to make device work.
I download heimdall 3.09, Android 2.3.6 Gingerbread [XWJQ8], Overcome Kernell 4 and probably I do something wrong. Mayby i don't understand somthing. Now I can't explaint what I do wrong. I use Overcome Kernell zImage, mayby I swaaped RECOVERY with KERNEL in Heidmall.
I write what is the situation now.
My device looks like hard brick, almost. It won't turn on when flash is end, push power button and nothing. I connect to the computer and after 20min its show samung logo by long time and go another step, show short animation, but it stuck. I turned off and try turn on and nothing happend.
Somehow I managed turn on download mode on device. I thing I have corruped bootloader, kernell and evrything .
Could someone can help me and tell what should I do, what firmware, bootloader download and how to flash by heimdall only, becouse Odin don't see the device. We can accepted that device is hard bricked and we must flash everything.
Thank You
Whait for help
Damian

The first bit of advice is to let this thing charge up, preferably overnight. From the way your describing it, it sounds to me like your Battery has gone flat. And, although you can, and I have done some Flashing with ca~ 10% Battery Life. Its not something you should do regularly. Alas I didn't have a USB Charger back then. I have since corrected this oversight, and now I can fully charge my P1000 with-in 4~5 hours. Assuming that you can only charge though a PC this WILL take longer. A lot longer!
After which you should try to reflash again with the stock Gingerbread 2.3.3. Oden Package gt-p1000_mr.pit, GB_Stock_Safe_v5.tar and the XXJPZ Modem <- VERY IMPORTANT! In my experience if I had forgot to include this File in Oden, and then flashed anyway I'd land up in soft-brick land, which then required me to use the One-Click Recovery which is a PITA to have to keep setting up on each use. (on a Windows7 Netbook).
If you still get errors then you may have to also flash dbdata.tar (PDA Section) to your P1000, and then go back into recovery and rerun Wipe Data/Factory Reset & Wipe Cache Partition. Which should hopefully fix your problems.
These Files must be unzipped! THEY ARE NOT MEANT TO BE FLASHED VIA RECOVERY!! You have to use either Heimdall or Oden to flash this!

It is false to assume you need root to flash a custom Rom. You only need custom recovery.
Rooting allows you to gain super user privileges.
Just because the kernel that has cwm also has root doesn't make rooting necessary.
Sent from my GT-N7100 using xda app-developers app

Thank You very much for help.
I do what you wrote and now I have samsung loop logo and CMR.
Now I can get i recovery mode with CMR V3.0.0.5
Now I only must swap vold.fstab but I can't get SU in adb shell. When I go to the adb shell, then in new cmd windows I put SU and get: perrmision denied. It should be rootend is't?
I will read now how to get SU acces but if someone can tell me how is easy way to swap files, I will be lising
Thank You one more time

Triceq said:
Thank You very much for help.
I do what you wrote and now I have samsung loop logo and CMR.
Now I can get i recovery mode with CMR V3.0.0.5
Now I only must swap vold.fstab but I can't get SU in adb shell. When I go to the adb shell, then in new cmd windows I put SU and get: perrmision denied. It should be rootend is't?
I will read now how to get SU acces but if someone can tell me how is easy way to swap files, I will be lising
Thank You one more time
Click to expand...
Click to collapse
I change vold.fstab from this solution: http://forum.xda-developers.com/showthread.php?t=1463756
My tab still looping I have logcat:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I should instal another rom, recovery file, do something in CMR Mode?

Help! Getting TWRP on this damn phone...

HELP!
S20 FE 5G SM-G781B.
I am at my wits end here. I have tried and tried, but, nothing... tried flashing TWRP with Odin multiple times (and versions), get a A-OK, installed fine, then try to boot into recovery... and it's just standard recovery.

You must disable auto reboot in Options tab in odin.

I've done that. No Bueno. I've been (trying to) follow this guide, but when it comes to the "press Vol Up+Vol Down+Power Button to enter Recovery" it just... doesn't work.
EDIT: Well, with USB connected Vol Up+Vol Down+Power Button just dumps me in Download Mode...

Try volume up+power only.

That just boots me into the standard recovery.
Thanks for taking time to help me, btw

Try another version of odin then

I SWORE I had tried different versions of Odin.. I have 3 versions downloaded (3.10, 3.12, 3.14). Odin3 v3.12 did the trick... somehow... so far, so good. But of course, when one problem seemingly gets solved, another one arises...
I can't find the zips (multidisabler-samsung-2.6a, Magisk-v21.4) in TWRP. I'm about to chuck this stupid phone out the window.
EDIT: I hate this stupid phone. One step forward, two steps back...

does usb connect to computer?

Yes. But when I connect in TWRP I just get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And I can't copy any files to the Internal Storage.
Connecting 'normally' I can access my SD card and Internal Storage as normal.

It seems like the TWRP fried something on your phone......Does 'adb push files' work(I can elaborate on this if needed)

Figures Hope it's nothing irreversible.
The TWRP I'm flashing is twrp-3.5.0_10-2_afaneh92-Q-r8q. You know if this is the right one?

What android version are you on?

11

Then you have used wrong TWRP, as expected. This is the right one:
twrp-3.5.0_10-2_afaneh92-r8q.tar | by mohammad.afaneh for Galaxy S20 FE 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Friendly Remind you that you need to reboot directly into download mode and flash this recovery(i.e.AVOID booting into stock rom)(Surely, disable auto reboot)

Q means built for Android 10 and R means built for Android 11.You used 10 TWRP on 11 ROM so it is buggy.

Good to know about the Q/R difference, thx.
But flashing the R version yields the same results

herringson said:
Good to know about the Q/R difference, thx.
But flashing the R version yields the same results
Click to expand...
Click to collapse
Nooooo! That may really be a irreversible damage. Try factory reset in TWRP or/and reboot into stock rom, which may help.

herringson said:
I'm about to chuck this stupid phone out the window.
Click to expand...
Click to collapse
I am afraid if this nightmare come true

herringson said:
Figures Hope it's nothing irreversible.
Click to expand...
Click to collapse
Maybe more than figures. The whole data partition can be corrupt. Factory reset (format data) in TWRP for android 11. Hate to say but you have to say farwell to all your files, to say the least.

Meh, I don't have any data worth saving, so that's no biggie... I just want to root this damn phone...