I have a G1 running cyanogen 5.0.8. Everything was going well until I wanted to add widgets to my left-side of the screen. Anytime I wanted to add a widget to the left-side of the screen it would force close. So I went to Rom Manger and fixed permission, cause it would help with my force closing issue. So I flashed my recovery to clockwork from RA-1.70. It was successful. Stupid me, was like, "You didn't need to flash clockwork recovery to fix permissions," so I flashed back to RA-1.70." That too was successful. Then I went to fix permissions. Fix permissions was successful. It prompt me to reboot, so I reboot. Now it got really ugly. My phone now stays at the T-Mobile G1 screen, I can't get into recovery, and the only thing I can do is get into fastboot. So in fastboot, it shows "No img. No img. No img. Then returns back to the fastboot screen, until my only options it to shut it down.
So I am screwed or it the hope?
Please help me
Thanks Matt
So is there hope is what I meant to say....my bad
If you can get into fastboot -then there is hope. I made the same mistake - and flashed two recoveries - and that is a problem.
What I had to do was get into fastboot - plug my phone into the usb cord, so that I could communicate with the phone from my laptop. I'm a newbie at this as well, but if you did not know, fastboot allows you to run command prompt from your PC - and send commands to your phone
Once I had fastboot running on the PC - I had to
Wipe the system, and then
flash my recovery image
Once my recovery image was flashed - I was able to
restore my last back-up without issue
others have reflashed their rom of choice
As noted - I too am a newbie, and your best tool will be to read and learn. I am not up to speed at this point as to commands in fastboot, etc - so do not want to write commands - or copy commands from other posts - in case I lead you in the wrong direction. I'm learning as I go along as well.
As noted, if you can get into fastboot mode - there is hope
Did you have to download ADB and SDK? I read some info on fastboot. And it seems like I have to download those programs and download drivers. Also where did you go to get the right commands?
Thanks for replying
I've seen that you have been involved in some of the other posts with similar issues. Yes, you need to download and install adb, and the drivers - check the sticky posts, all links are there for where to download - and how to get started
http://forum.xda-developers.com/showthread.php?t=532719 this is a good place to start
Good luck - take your time, I already bricked my first G1 and then transplanted a motherboard and started over again.
I now read twice, and make changes once - trying to learn from my mistakes, and not make them again
I think I have had the same problem. I fixed permissions via rom manager and then it prompted me to reboot. Now it is stuck at the G1 screen. I can load it up after holding "home+red power button" so that is good I guess. Is my only option to wipe and start over? I do have a backup but it is 1+months old and I dont want to lose everything in the last month unless absolutely necessary.. My mod info is in my signature.. Please help, my phone is out of commission right now and I need it back soon!
any solutions besides the 1 month old backup? or wiping and starting again??
Related
Edit: ****, ok so my phone isn't booting up now..the phone just freezes at the g1 splash logo.
I can still get into recovery console/bootloader, can I save my phone? Help!
I do have other theme's in /sdcard/themes/
I don't know if I can delete the current update.zip in my root and move one of them to the root and rename it, then flash that on? Someone please help!
-Ok so, I have the sdk...
-I'm in fastboot mode
-I have the correct driver for the phone, windows picks it up
but when adb doesn't pick up the devices, is there something I need to do to "get started" so to say? I'm trying to install some themes and push the browser.apk into the phone but, im stumped
tehseano said:
Edit: ****, ok so my phone isn't booting up now..the phone just freezes at the g1 splash logo.
I can still get into recovery console/bootloader, can I save my phone? Help!
I do have other theme's in /sdcard/themes/
I don't know if I can delete the current update.zip in my root and move one of them to the root and rename it, then flash that on? Someone please help!
-Ok so, I have the sdk...
-I'm in fastboot mode
-I have the correct driver for the phone, windows picks it up
but when adb doesn't pick up the devices, is there something I need to do to "get started" so to say? I'm trying to install some themes and push the browser.apk into the phone but, im stumped
Click to expand...
Click to collapse
First, you are at the wrong screen. You should not be in fastboot mode in the bootloader for updating themes, you should be in recovery mode.
I suggest you perform a wipe to possibly bring your phone back to normal at least. It can be done by turning off the phone, then pressing and holding the back and home button until you enter recovery mode.
From there press alt + w to wipe the phone.
Then restart by pressing back + home.
Next, before installing the theme, make sure its the correct one for your phone. Check with the author if it was made for RC30 or RC8, and if it is a non-wipe theme, because if it is not, you will be stuck at the Tmobile G1 splash screen (aka be in an indefinite loop) like your current situation.
If you are trying to install browser.apk (im assuming the multitouch browser - please correct me if im wrong) you will need to install JF 1.41 first. By default it will include the multitouch version of browser.apk
Please provide more information about your situation, and keep us posted.
andonnguyen said:
First, you are at the wrong screen. You should not be in fastboot mode in the bootloader for updating themes, you should be in recovery mode.
I suggest you perform a wipe to possibly bring your phone back to normal at least. It can be done by turning off the phone, then pressing and holding the back and home button until you enter recovery mode.
From there press alt + w to wipe the phone.
Then restart by pressing back + home.
Next, before installing the theme, make sure its the correct one for your phone. Check with the author if it was made for RC30 or RC8, and if it is a non-wipe theme, because if it is not, you will be stuck at the Tmobile G1 splash screen (aka be in an indefinite loop) like your current situation.
If you are trying to install browser.apk (im assuming the multitouch browser - please correct me if im wrong) you will need to install JF 1.41 first. By default it will include the multitouch version of browser.apk
Please provide more information about your situation, and keep us posted.
Click to expand...
Click to collapse
Sorry, I should have provided more information, and explained that the 2nd half of this post was my original post, which was just me asking how to correctly use ADB. I do already have JF 1.41, I upgraded yesterday. It wasn't my first theme I installed either. I was using Vintage War (for the Dream), but it hadn't been updated for 1.41, so I was trying the standalone apk adb push method found in this forum, which is where this post first oriented.
I was in recovery mode for installing themes, I'm using JF 1.41 RC30, with the HardSPL bootloader. Initially after installing the theme it would go blank after the g1 splash, so I had tried to install it again hoping it would fix it, unfortunately my thumb is a bit to fat and I hit alt W instead of S, anyways that is what put me into this infinite loop.
But like I said this wasn't my first time trying to mod the phone, I've had it rooted for a month or so now, and have been keeping up-to-date.
Any more information I can provide, please let me know. My phone is my livelyhood, I need it. So if anyone can help, the sooner would be better. Either way I am entirely greatful for any help anyone can provide. Thanks in advance!
tehseano said:
I was in recovery mode for installing themes, I'm using JF 1.41 RC30, with the HardSPL bootloader. Initially after installing the theme it would go blank after the g1 splash, so I had tried to install it again hoping it would fix it, unfortunately my thumb is a bit to fat and I hit alt W instead of S, anyways that is what put me into this infinite loop.
Click to expand...
Click to collapse
It is weird how a wipe caused you to go into an infinite loop. Which apk's did you try to push to your phone?
I would suggest to go without using the theme for now. JesusFreke had pointed out that some themes were causing problems for the new 1.41. update. You should check with the author of the theme to see if its compatible with the new 1.41 (which it should be since RC30 1.3, RC30 1.31, and RC30 1.41 are all compatible)
andonnguyen said:
It is weird how a wipe caused you to go into an infinite loop. Which apk's did you try to push to your phone?
I would suggest to go without using the theme for now. JesusFreke had pointed out that some themes were causing problems for the new 1.41. update. You should check with the author of the theme to see if its compatible with the new 1.41 (which it should be since RC30 1.3, RC30 1.31, and RC30 1.41 are all compatible)
Click to expand...
Click to collapse
....How do I get out of the loop. My phone doesn't get passed it. There has to be something I can do in console or recovery or something. I'm really sorry if I'm coming off as rude or demanding but I really need a phone, and I need it right now. I don't know what more I can tell you before someone can finally give me a solution (sorry)
1. Download RC29
2. Copy it onto your sdcard
3. Reboot your phone into the SPL with Power+Camera
4. When prompted, press the end key to start the reflash.
Note: this will completely wipe the flash chip on your phone and revert everything back to factory. You will need to re-root your phone and update to JF1.41
Next time, use nandroid to backup before installing themes, etc.
Datruesurfer said:
1. Download RC29
2. Copy it onto your sdcard
3. Reboot your phone into the SPL with Power+Camera
4. When prompted, press the end key to start the reflash.
Note: this will completely wipe the flash chip on your phone and revert everything back to factory. You will need to re-root your phone and update to JF1.41
Next time, use nandroid to backup before installing themes, etc.
Click to expand...
Click to collapse
Alright, I'm doing it now. And I did use nandroid and make a backup, no one said anything about how to restore it. Regardless thank you so very much, you are my Savior right now!
tehseano said:
Alright, I'm doing it now. And I did use nandroid and make a backup, no one said anything about how to restore it.
Click to expand...
Click to collapse
That's easy. Just grab a copy of the fastboot utility and the images off your sdcard in the 'nandroid' directory and boot your phone into the SPL. Plug your phone in via usb and press the back button once and you should see "Serial0" change to "FASTBOOT" Then open up a windows command prompt in the location of the exe you downloaded and run:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata data.img
fastboot reboot
Your phone will come back up with all of your applications, settings etc from when you did the backup. Keep in mind you need the HardSPL to do this though(look for three androids on skateboards in SPL). The G1 factory bootloader does not support fastboot, only NBH images that come from the factory.
Hi, my situation is a bit worse:
I have a Dev Phone, upgraded to JFv1.41.
Today, I got the pop up message telling me to do a "system holiday update 2 of 2". I press "Update now" and the phone got reboot. Since then... I could not get through the first screen that has the word "Android" at all, not even to the screen where Android icon is flashing. It just freezes right there.
The only way to turn off is to take out battery. I could not enter recovery mode through pressing Home+Power. One time, the screen actually turned into weird color patterns. Is there anything I can do? consider that I don't have any nandroid back up image at all?
I tried to download the DREAIMG-RC29.zip, unzip and copy to the sdcard, then reboot into the SPL with Power+Camera but nothing happens, just a 4 color screen said "serial0".
Thanks in advance.
Isn't the 4 color screen the standard bootloader that ships with retail G1's (not a dev phone bootloader)?
lugiamx said:
Hi, my situation is a bit worse:
I have a Dev Phone, upgraded to JFv1.41.
Today, I got the pop up message telling me to do a "system holiday update 2 of 2". I press "Update now" and the phone got reboot. Since then... I could not get through the first screen that has the word "Android" at all, not even to the screen where Android icon is flashing. It just freezes right there.
The only way to turn off is to take out battery. I could not enter recovery mode through pressing Home+Power. One time, the screen actually turned into weird color patterns. Is there anything I can do? consider that I don't have any nandroid back up image at all?
I tried to download the DREAIMG-RC29.zip, unzip and copy to the sdcard, then reboot into the SPL with Power+Camera but nothing happens, just a 4 color screen said "serial0".
Thanks in advance.
Click to expand...
Click to collapse
I had the same problem, almost verbatim. ADP1.1, JFv1.41, ran the Holiday update 1 of 2, no problems, did the 2 of 2 update, got stuck at the flashing Android boot screen. Pulled the battery, rebooted, same thing, waited 2-3 minutes at the flashing screen and was just about to pull the battery again and then all of a sudden the damn thing came to life, the OS loaded up and now everything's working fine. Gave me quite a scare.
ummm actually the fastboot utility wont work for my computer soo what shoud i do.... if anything i need a really good reply something long cause im new to this and my fone wont get off the android sign.
chinoman said:
ummm actually the fastboot utility wont work for my computer soo what shoud i do.... if anything i need a really good reply something long cause im new to this and my fone wont get off the android sign.
Click to expand...
Click to collapse
Why have you just hijacked a 5 month old thread? You haven't given use any details either. Fastboot is available for all OS's, it will work on your computer, you just probably don't know how to use it. Please make a new thread in the Q&A section where we can help you out there.
This should be closed or moved to Q&A.
hey man just unroot ur phone and root it again u soft bricked ur phone its ok
hey just try to unroot k
hey if u want me to fix it for u just email me at [email protected] and ill help u
Hello
i have a problem with my nexus one,
i tried to install some theme's and it whent horribly wrong.
when ever i boot my nexus one it tells me prosesses have stopped unexpectedly, and it shuts down again. and it stays in this loop.
now ive tried to recover my phone a few times with
"fastboot devices"
"fastboot flash recovery "image file""
how ever the command promt doesnt go beyond "waiting for device"
i think the problem is that USB debugging is turned off, is there any way of turning this on without haveing to go to settings ? (couse yeh i cant get there)
please help me on this one
hope im not totaly f-ed
//Duvel
sorry if there are typo's im dutch
did you put the phone into fastboot mode, before you tried the fastboot command? and second, why are you flashing the recovery image? that won't fix you phone
i think you should try a factory reset, either by flashing your rom again or by selecting some option. what rom do you have installed? stock? if not, which and which recovery image do you have installed? there is an option in amon_ra's image do factory reset. i never used the stock recovery, but there should be an option to wipe there as well. anybody?
ps: please stop using fastboot and adb commands, if you are don't know what you are doing, before you brick your phone.
i used the following guide to root
forum.xda-developers.com/showthread.php?t=636795
i just stoped at the part where the sence ui was installed,
yes i put my phone into fastboot mode but again i think the problem is that i cant enable USB Debugging
ok i just recovered my phone with the following image
"CyanogenMOD version : recovery-RA-nexus-v1.7.0-cyan.img"
how ever im still getting unexpected application stops,
com.android.setupwizard
com.android.bluetooth
com.android.callender
com.android.mms
any idea on how to restore them ?
maybe its usefull to know i tried to use the morph "BlackMatteMorph"
from the following thread "forum.xda-developers.com/showthread.php?t=654858"
//Duvel
got it fixed now
thanks alot FloOGB some of your pointers realy helped me out,
i fixed it by installing the drivers provided by th3fallen
"forum.xda-developers.com/showthread.php?t=613217"
after that i followed the following steps got from from a post of Jeremy Sikora
"forum.androidcentral.com/google-nexus-one-roms-hacks/7366-how-install-custom-roms-your-nexus-one.html"
im sure the same topic is on XDA somewhere, this was just the first website i got directed to by google
1.) With your device powered off hold down on the volume down rocker while pressing the power button. From there select "recovery".
2.) Once in recovery select backup/restore and choose Nand backup.
When that is completed you now have a backup image saved on your SD card in case you ever need to go back to the normal ROM.
3.) Now from the recovery menu select Wipe and then Wipe data/factory reset.
4.) Once the wipe is completed select Flash zip from sdcard to select the ROM you wish to install.
5.) Once the flashing process is completed simply reboot and enjoy your freshly flashed Nexus One!
i installed the rom: Cyanogenmod For Nexus One V5.0.6
"forum.cyanogenmod.com/index.php?/topic/150-cyanogenmod-for-nexus-one-v506-04152010/?"
sorry that you arent able to click the links im providing, im new to the forum and im not allowed to make direct links yet.
so thanks again FloOGB.
//Duvel
you're welcom, no problem
even if i didn't say anything that useful i think i would have never thought about drivers since i'm using only linux and it's sort of plug and flash here.
I have a Mytouch 3G running test 7 on my phone, and i just installed the clockworkmod rom manger. After, installed it i wanted to flash a new rom, so flashed the clockwork mod recovery, and when i tried to install the new rom from the sd card, it keeps on getting stuck on the mytouch screen, and nothing happens. How do i get into the recovery screen? thanks
First: This belongs in Q & A !!!!111
Which ROM did you flash? Maybe you had to wipe before
right now, i'm running cyanogen test-7, but when i go into the clockworkmod rom manger app and pick the flash rom from sd card, it just says it has to go to the recovery, and then my phone will reset and it would just get stuck on the mytouch screen. So, i just pull out the battery and reset the phone again, and i realized if i press the end button, it will go the rom that is already on the phone. I'm i suppose to push some buttons or something to get to the recovery screen?
No it should flash the rom you select and reboot the phone to boot the new rom without keypress needed.
maybe the wrong device was selected when downloading the recovery image? Try reinstalling clockworkmod recovery from rom manager.
Mod edit: not dev related, moved to q&a
I have the same problem.
I downloaded and installed Rom Manager from the Market and it has completely screwed up my recovery (I can't get into it at all). I tried flashing Amon's again (through Rom Manager) and it still doesn't work.
HTC G1. CM5.07 test 7 (trying to go to stable!).
Your recovery has been corrupted, you will need to flash it through fastboot.
JAguirre1231 said:
Your recovery has been corrupted, you will need to flash it through fastboot.
Click to expand...
Click to collapse
Yes thank you. I erased recovery partition in fastboot then reflashed Amon's.
Working now.
i got into the fastboot screen, but i have 4 options. hboot mode, reset device, restart to hboot, and power down. how do i flash from here?
illmatic282 said:
i got into the fastboot screen, but i have 4 options. hboot mode, reset device, restart to hboot, and power down. how do i flash from here?
Click to expand...
Click to collapse
Connect to your PC via USB, and from the command line issue "fastboot erase recovery" and then "fastboot flash recovery filename.img"
More on common fastboot commands here can be found on these forums, i'm not allowed to post links.
i connected my phone to my computer but nothing on my computer pops up. only the new hardware wizzard pops up. what do i do from here? im i suppose to get a adb popup? how do i set up the fast boot? i'm so confused..thanks
some one, please help..i want to be able to flash new roms in the future...thanks in advance
Can I sugges that you try this sticky thread at the top of this forum board.
It contains all you need to know on who to set up fastboot and how to use it - there are a couple of tutorials on it if you read through the thread.
CM 5.0.7 for Dream/Sapphire introduced a bug in flash_image. It causes recovery flashes to fail. It has since been fixed in the latest test of 5.0.8 I believe.
Man i have the same darn bug cant get back into recovery for nothing, and i dont have a pc to fastboot i have a non intel based mac so no adb or fastbooting, i have been doing fine for forever without adb or fastboot but is there any way around this one, i need help bad, im on HTTClay Superbadv1.3 and it has all sorts of bugs but i cant nandroid or bart or flash any rom without recovery, can someone please help!!!
Also is there another way to erase the recovery partition?
Okay...I'm at a loss. I've spent the last two days trying to root and install the deck gingerbread. I've focused on this page http://forum.xda-developers.com/showthread.php?t=694572 and this one http://forum.xda-developers.com/showthread.php?t=902493 and successfully rooted. However, that's where I'm stuck. I flashed the recovery.img (and since it rebooted, assumed that it took) and now want to complete the instructions for gingerbread from here http://forum.dev-host.org/viewtopic.php?f=9&t=7. Brackets after each step from that page describe my problems.
1. Reboot into recovery. [I assume I can do this? Because I flash_imaged recovery.img? If it doesn't hang, however, it just launches the phone into apparently normal state?]
2. *optional* make a nandroid backup. [I never got an option to do this. Ever.]
3. Wipe Everything. [I don't have an option for this anymore. I did at one time? It's no longer in the boot menu.]
4. Flash gingerbread rom zip. [I would love to. How? I have no options for this. No command prompt options.]
...and I'm stuck.
5. DO NOT REBOOT YET.
6. Flash gapps zip.
6a. Flash Kernel *if you are using a custom kernel*
7. Reboot.
8. Enjoy gingerbread!
When I reboot I either get a fastboot menu or hboot, neither of which have options other than each other, resetting device, booting into recovery (which 5/10x hangs the phone).
I would LOVE to know why this isn't working (e.g., my phone doesn't have options listed on these instructions) or what I could do to fix it. Believe me, I know there are instructions all over, and I've probably read most of them today. I'm going crazy trying to figure this out. On top of it all, ROM Manager/Toolbox won't even work because the free Manager is off the market. If anyone could help, I would be very grateful. I have adb installed on my PC, if that helps.
Thank you! I am totally frazzled.
eta: GRRRR I knew that if I posted here I'd find the answer on my own. Turns out the recovery image I was using was apparently wrong (but appeared to work correctly) so that's why I wasn't getting the error. Think things might be okay now...got the menu and am busily installing. Sorry for the interruption...
Well.....
Did you ever get it done?
I bought a VS980 last week and have been trying to flash a new recovery ever since. It is rooted, but when I try to reboot into recovery, the phone reboots and as soon as the LG splash shows up, the phone turns off. Not reboots, or freezes, or boot-loop, but just turns off. I have followed several different methods of flashing from different articles/guides i have found but all have the same effect. I have done a factory reset twice and tried to start fresh, but have the same result. I have done several options of using ADB Push to flash the recovery and I have tried to use, CWM, TWRP, Flashify, RomToolBox Pro, and GooManager apps to flash into recovery but I always have the same result. Phone reboots, LG Splash shows up for just a second, then the phone turns off.
I am about out of ideas. Please help!
usafmunk said:
I bought a VS980 last week and have been trying to flash a new recovery ever since. It is rooted, but when I try to reboot into recovery, the phone reboots and as soon as the LG splash shows up, the phone turns off. Not reboots, or freezes, or boot-loop, but just turns off. I have followed several different methods of flashing from different articles/guides i have found but all have the same effect. I have done a factory reset twice and tried to start fresh, but have the same result. I have done several options of using ADB Push to flash the recovery and I have tried to use, CWM, TWRP, Flashify, RomToolBox Pro, and GooManager apps to flash into recovery but I always have the same result. Phone reboots, LG Splash shows up for just a second, then the phone turns off.
I am about out of ideas. Please help!
Click to expand...
Click to collapse
Are you running JB or KK?
JB - Download flashify from the market and let it handle flashing the recovery
KK - Follow the directions here, steps 5-8 if you're already rooted and on 24A. - http://forum.xda-developers.com/showthread.php?t=2702958
mjones73 said:
Are you running JB or KK?
JB - Download flashify from the market and let it handle flashing the recovery
KK - Follow the directions here, steps 5-8 if you're already rooted and on 24A. - http://forum.xda-developers.com/showthread.php?t=2702958
Click to expand...
Click to collapse
Thank you so very much. The guide from the link you posted worked. You have just ended a week long battle for me and you have my thanks!
usafmunk said:
Thank you so very much. The guide from the link you posted worked. You have just ended a week long battle for me and you have my thanks!
Click to expand...
Click to collapse
Well I spoke too soon. I followed the guide in from the link, which did in fact allow me to reboot into TWRP, however, the phone seems to have been bricked in the process. I unless I use the hardware keys to reboot into recovery, the phone boots up completely blank. The screen is on, but it is black. I have tried to revert back to stock but I have not been able to. I followed all the directions found here:
http://forum.xda-developers.com/showthread.php?t=2432476&highlight=download+fail
Still no luck.
usafmunk said:
Well I spoke too soon. I followed the guide in from the link, which did in fact allow me to reboot into TWRP, however, the phone seems to have been bricked in the process. I unless I use the hardware keys to reboot into recovery, the phone boots up completely blank. The screen is on, but it is black. I have tried to revert back to stock but I have not been able to. I followed all the directions found here:
http://forum.xda-developers.com/showthread.php?t=2432476&highlight=download+fail
Still no luck.
Click to expand...
Click to collapse
Please can you describe anything that's going wrong? I.e. Can you access downloader mode?, Is your port set to COM41 (Note it does not set it automatically)?, Anything else that would give us an idea where the reverting back to stock process is going wrong?
TheOriginalKyle said:
Please can you describe anything that's going wrong? I.e. Can you access downloader mode?, Is your port set to COM41 (Note it does not set it automatically)?, Anything else that would give us an idea where the reverting back to stock process is going wrong?
Click to expand...
Click to collapse
Sure. I do not know if I am able to reach Fastboot or not. I can get into TWRP Recovery and request Fastboot, as well as hold the Up-Volume buttons on start, but the screen comes on blank after the LG icon goes away.
I can not see the device from my File Explorer in Windows. I have tried to remove each of the 3 devices that appear in my Device Manager and re-install them with the most recent drivers for my phone, which seems to work, but then I still cannot connect to it. The computer recognizes that a device has connected, but I guess I do not know how to transfer files if not through File Explorer or an ADB push.
I have tried to use ADB push but I cannot see any ADB Devices. Within TWRP, I have tried to use ADB Sideload, but the message '//twrp/backups/086c8bd70b935975' not found comes up and so it gets stuck on "starting ADB Sideload feature...."
When I use the "Mount" option in TWRP, Only Data and Cache is selected. I can select System, but I am not able to select USB-OTG
When trying to use the LG Flash Tool (and tried to change every port to 41 for each device I found in Device Manager), it fails with "Model: Unknown"..."device Model is different!"..."Check Phone or DLL!"...."00000000"
I think there were some other things tried too but that is all I can think of at the moment.
usafmunk said:
Sure. I do not know if I am able to reach Fastboot or not. I can get into TWRP Recovery and request Fastboot, as well as hold the Up-Volume buttons on start, but the screen comes on blank after the LG icon goes away.
I can not see the device from my File Explorer in Windows. I have tried to remove each of the 3 devices that appear in my Device Manager and re-install them with the most recent drivers for my phone, which seems to work, but then I still cannot connect to it. The computer recognizes that a device has connected, but I guess I do not know how to transfer files if not through File Explorer or an ADB push.
I have tried to use ADB push but I cannot see any ADB Devices. Within TWRP, I have tried to use ADB Sideload, but the message '//twrp/backups/086c8bd70b935975' not found comes up and so it gets stuck on "starting ADB Sideload feature...."
When I use the "Mount" option in TWRP, Only Data and Cache is selected. I can select System, but I am not able to select USB-OTG
When trying to use the LG Flash Tool (and tried to change every port to 41 for each device I found in Device Manager), it fails with "Model: Unknown"..."device Model is different!"..."Check Phone or DLL!"...."00000000"
I think there were some other things tried too but that is all I can think of at the moment.
Click to expand...
Click to collapse
Well new update: I was able to fix it! The problem was my own ignorance. I was following some Googl'd instructions to get the device into download mode that were incorrect. Once I saw the correct ones, I was able to get into Download Mode and revert to stock from there.