Hi,
Does anybody else have a problem with microphone when loudspeaker is on during a call? Ive had quite a few people complaining that they cant hear me when Ive got the speaker on. As soon as I switch off the speaker, they can hear me fine. Does not matter if I place the mic close to me or move it further away, they still say they have trouble hearing me with speaker on.
Any ideas if I can resolve this? Have tried AGC setting with no success.
Thanks
I have the same problem for a while. Can't use speaker phone. It was working fine before so I am thinking some of the software that I installed render the speaker useless. I will try to backup everything and then do a hard reset to see if the problem still exists.
My Friend; I have the Same Case in my Kaiser and I post yesterday this issue but with no luck . we have to find a solution for this bugs, I tried something it might improve it a little ; during the call reduce the Speaker volume to be 2 degree only and it might help. But we have to know if it is a common in all devices or not
I tried the Hard reset but it is smae and no luck yet
I just tried the method proposed in abother thread here and it fixed the problem! I disabled the Microphone AGC in the phone setting and it works fine now. Save me some hassle.
are you sure of disable AGC as I tried but it is the same result
i have the same problem, and i don't have the auto mic gain enabled. i haven't hard reset yet, but it stopped working properly after i installed resco voice recorder and/or vito voice...
Looking at another thread, it may be that the speaker is half duplex. I.e you both cant be speaking at the same time. Wonder if this can be resolved?
My Kaiser comes by default Microphone AGC disabled, and the problem persists. Any suggestion???? thanks.
tsangwc said:
I just tried the method proposed in abother thread here and it fixed the problem! I disabled the Microphone AGC in the phone setting and it works fine now. Save me some hassle.
Click to expand...
Click to collapse
rocho said:
My Kaiser comes by default Microphone AGC disabled, and the problem persists. Any suggestion???? thanks.
Click to expand...
Click to collapse
Precisely you are right. I do not think by enabling/disabling the Microphone AGC does help. This is apparently a design fault. I have got my set replaced from the service center but still having the exact problem.
I wonder if HTC can fix this problem! I read from one of the threads somewhere that one of the users found the MDA Vario III works perfect...though they are also of the kaiser family....
wish2006 said:
Precisely you are right. I do not think by enabling/disabling the Microphone AGC does help. This is apparently a design fault. I have got my set replaced from the service center but still having the exact problem.
I wonder if HTC can fix this problem! I read from one of the threads somewhere that one of the users found the MDA Vario III works perfect...though they are also of the kaiser family....
Click to expand...
Click to collapse
Same problem, and i haven't modded mine at all. Using the default ATT ROM and tried speakerphone, couldn't be heard...
I had the same problem when using my TyTn and attempting to use the speaker phone. I was hoping this would be resolved in the TyTn II but it's the same problem where the person you speaking to complains they can't hear you properly.
I think its a common problem in this model as my device is brand new and same problem
Strange. I was making some tests last night, talking to another person using the speakerphone.
It worked just fine most of the time. Her voice was a little distorted due to the bad quality (maybe just bad equalization) of the speaker, but she told me she could hear me well. She told that even though I was speaking far from the mic and not that loud, the sound came just clear to her. The only thing she noticed was that I sounded like an answering machine .I also tested running some programs while speaking to her.. and then, coincidence or not, she heard some static for a second or two.
I also tested speaking while she was also speaking, and we both heard each other. It worked as a full-duplex.
I must say that it was late at night, so it was all silent. Except when my dog started barking, he was far away at the yard, and she heard him too.
I used it some days ago while driving, and she couldn't hear me. I had the radio on, and there was traffic sound and stuff. I had to turn the speaker off because I was driving and I was in a hurry, so I couldn't test any further.
Later on, I tested it with my girlfriend when we both were in my car and I was driving. She said she could hear me, but then it started echoing due to the loudness of my speaker, and that was all we could test.
I had Microphone AGC disabled in all tests.
I have the same problem... the other person cannot hear me when i am on speaker
i have the same problem!!!
This is a serious problem it appears most of us are having with the speaker phone microphone.
Has anyone logged this problem with HTC?
It looks like a s/w update will be required to fix?
I am using with an MDA Vario III UK and it seems to be working fine, I have not had any problems even after installing software or by having AVG on or off.
There is a problem if both parties speak at the same time where either person may not hear the other, I think that is to do with a duplex problem mentioned earlier in the thread.
It appears a number of people have the problem and a number do not. It may be software version related.
I am using the following software on an AT&T Tilt:
ROM version: 1.57.502.2
Radio version: 22.45.88.07H
We need to find a pattern with the problem, Can others share what software they are running and if they have the microphone problem?
Speaker problem is software
I can confirm that it is a software problem. When I recieved my MDA Vario III didn't had the speaker problem but as soon as I flashed my device with either the kaiser or tytn II rom the problem occured. Don't know how to solve it...
Hi I'm having some problems with my Diamond (ROM 1.93.456.2 / WWE Radio 1.00.25.05)
Whenever I call or if somebody calls me they can barely hear me. I have to really talk very loud or speak directly to the microphone.
I even tried to test using the recorder and the results are the same.
Hope you can help me.
Thanks in advance.
Duplicate Issue
Hi, this is being covered in the following thread...
http://forum.xda-developers.com/showthread.php?t=418383
I have a AT&T Tilt running Sleuth 3.0 ROM, with its Radio.
When I'm in call, the person on the other end sometimes doesn't hear me.
It's like the auto cut-off ambience/background noise is working too much, especially when the person background is so noisy, he can hear nothing as if my mic is muted.
This happens very bad if I'm on speaker phone, when I'm driving I put my tilt on the center box, the person on the other hand can hear choppy voices of mine.
Anyone experience this?
It's hard to explain, but basically it's like the old handfree cordless phone on speaker, with auto cut-off ambience feature.
Do I need to upgrade the Radio?
Mine is running 1.64.08.21
Thanks all
I have the same problem. I have 3 At&t tilts phone, 2 of them use Diamond V10, and one is V9. Yet, all have the same problem to you. I hope that if anybody can solve this problem. Thanks so much.
solution
I had that problem to!
In the mobile shop they said we must send it to let it repair.
i thought that can take many weeks!!
What i did was updated my rom to windows mobile 6.1..!
and now i can talk over my speaker and the noise reduction works fine..!!
its much better with WM 6.1..!!!!
I hope it will helps you..!
sorry for my language usage i don't speak english very wel..!
Through searching, I found out a solution that is to upgrade the Radio, for my TIlts Diamond V9 & V10 I use Radio 1.71.09.01. (current is 1.57. .... somthing). It works well now.
Default Htc Tytn II freezes with incoming call
Hi, My hyc tytn sometimes freezes when im using an bluetooth headset ( jabra bt 5020 )
the bluetooth ear piece rings in my ear but not on the phone
This happens maybe once every 5 or 10 calls
I tried it on another htc tytn II, same problem
This is what i see on my screen :
On the top of the screen ( on the right ) i can see the icon of the incoming call,it doesnt respond when i click on it
After a while it gives an cprog.exe error ..
Can someone help ?
Same problem
I have the same problem, I wasnt aware that it is bluetooth-headset related. Mine is a Plantronics Discovery 655.
Any idea why?
Ah I see the problem. Your phone is displaying jiberish.. Don't you know that they only speak english..
j/k, this sounds like a strange one. I hardly use BT but I think that this has happened to me before.
ChumleyEX said:
Ah I see the problem. Your phone is displaying jiberish.. Don't you know that they only speak english..
j/k, this sounds like a strange one. I hardly use BT but I think that this has happened to me before.
Click to expand...
Click to collapse
Nobody ????
Actually this is a common problem with TYTN II running Windows 6.1. No one actually knows what causes this. Here is a thread on the same topic.
http://forum.xda-developers.com/showthread.php?t=438457&page=27
So dont worry you've got company.
Hi I am having the same problem after I updated to OS 6.1
I have noticed, it generally happens when I am in car where the mobile signal is fluctuating, generally I use bluetooth when I am driving.
Its a big bug which can not be rectified then
I hope any solutions for this.
Hi!
ive tried searching but all i can find is usually incall voice problems requiring bluetooth or wired headsets.
my problem is the complete opposite. most of the time, when i use the phone to answer a call (without wired headsets or bluetooth) the person im talking to can barely hear my voice. i have to literally shout for them to understand what im saying.
ive tried placing the pda and phone volume to max level already but it doesnt solve the problem.
is there anyone who experienced this same problem? any tips? thank you for taking the time to read this
Hi,
ive the same problem. my voice goes as interrupted to the person i talked. But i can hear clearly everyone i talk.
ive tried radio rom 1.14, 1.16, 1.17, bu all the same.
Is there anyone know, hor can i fix this???