Database Develop

Problems with Kaiser

My Kaiser has been acting up since today morning.
The buttons/keyboard wont work and the voice recording program will start automatically and create files for every 4-8 seconds back to back.
I'm running Dutty's Dual touch ROM.
I reinstalled it and it worked perfectly fine for few hours until when i started txt messaging again....
any suggestions

hamudi said:
My Kaiser has been acting up since today morning.
The buttons/keyboard wont work and the voice recording program will start automatically and create files for every 4-8 seconds back to back.
I'm running Dutty's Dual touch ROM.
I reinstalled it and it worked perfectly fine for few hours until when i started txt messaging again....
any suggestions
Click to expand...
Click to collapse
Are you performing a hard reset after the rom installation?
Also what applications have you installed?
Next time post this in the thread where the rom is, try to stick to forum rules

Also what do you mean your keyboard is broken? Is it simply not functioning at all or are you typing a sentence and " it cmes out lke tis"

oops thanks, I'll post it in that thread. Basically I've been using it for good 5 months and no other applications have been installed.
Keyboard is not broken...the send/end/email/windows start buttons wont work...only the touch screen works.
and yes i hard reset it after the installation

seems like the problem is not with custom rom/firmware and its with the phone in general.
I'm now running stock firmware and the butons still dont work and it acts weird as soon as i turn on (example - goes to phone mode and dials EDFC, and then opens voice recording and starts recording small clips for every 4-6 seconds until i bring it complete stop)

hamudi said:
seems like the problem is not with custom rom/firmware and its with the phone in general.
I'm now running stock firmware and the butons still dont work and it acts weird as soon as i turn on (example - goes to phone mode and dials EDFC, and then opens voice recording and starts recording small clips for every 4-6 seconds until i bring it complete stop)
Click to expand...
Click to collapse
Sounds like one of your buttons is stuck. Maybe try dusting the button area with canister air duster? Hope you don't have to do defective exchange, but that might be in the cards.

cushcalc said:
Sounds like one of your buttons is stuck. Maybe try dusting the button area with canister air duster? Hope you don't have to do defective exchange, but that might be in the cards.
Click to expand...
Click to collapse
I will try that tonight,
Might have to take it into a cell repair store...the drawback is i bought it off a local user, i will give HTC a call.
i love this phone

hamudi said:
My Kaiser has been acting up since today morning.
The buttons/keyboard wont work and the voice recording program will start automatically and create files for every 4-8 seconds back to back.
I'm running Dutty's Dual touch ROM.
I reinstalled it and it worked perfectly fine for few hours until when i started txt messaging again....
any suggestions
Click to expand...
Click to collapse
If i read you correctly, reinstalling the OS fixed it temporarily right? Maybe you got a corrupted file download and should redownload it again? It seems odd to me that the buttons would work short term after a reinstall.
Also , you can try other roms aside from Dutty's ( while his certainly is nice ) there are many alternatives. Pick one that has the radio included just to make sure you dont have some sort of firmware corruption. Also update Hard-SPL to the newest here.
Just a few things you could try

pyraxiate said:
If i read you correctly, reinstalling the OS fixed it temporarily right? Maybe you got a corrupted file download and should redownload it again? It seems odd to me that the buttons would work short term after a reinstall.
Also , you can try other roms aside from Dutty's ( while his certainly is nice ) there are many alternatives. Pick one that has the radio included just to make sure you dont have some sort of firmware corruption. Also update Hard-SPL to the newest here.
Just a few things you could try
Click to expand...
Click to collapse
Yea I tried that too, but now it just wouldn't work...I formatted the memory car but i couldn't format the device, i called HTC and they asked me to send it in and they will take a look at it and said will fix it. I have to return everything back to stock and see how it goes.
Thanks guys

diamond2 needs reset to wakeup! Please help!

Happened this morning, I noticed that my diamond2 is not responding when pressing the power button as usual... black screen!
It wakes-up in two cases:
1. soft reset with the stylus.
2. removing the battery and putting it back then pressing the power button.
This happens after I leave it turned off for 5 minutes. It is working fine as long as I don't turn it off. When it is off 5 minutes then no response!
Note: I am using the latest htc rom.
Don't know if this is a software or hardware problem. Any help is much appreciated.

I have actually had a fairly similar problems with my TD2. Not regular and not at spercific times like after 5 minutes but there have been times when my screen doesn't want to turn back on, the device is still on because it still make some of the regular sounds, eg the ping on the home button but the screen is dead.
Like you it will only wake again after a battery out reset, sometimes after several attempts.
I'm pretty sure this is hardware related as like you i'm on an official rom. The first time this happened was after using the phone as a modem and it got quite hot so i think perhaps heat is loosening the connection to the screen, only a guess though so any other opinions welcome.

After trials for 8 hours, I figured out a work around.
I Forced the mobile to work in the GSM only band, from that moment, it is back to normal... 3G is important to me, but I think I will wait until the WinMobile 6.5 is out for our TD2... may be this will solve the issue!

Hard reset it at least once..... That may take care of the freezing issue.

tomtommy306 said:
Hard reset it at least once..... That may take care of the freezing issue.
Click to expand...
Click to collapse
did not solve the problem! could this be a network problem or the device's radio rom?

My phone did the same, i disabled the TouchFLO and it worked Fine

mkh1983 said:
My phone did the same, i disabled the TouchFLO and it worked Fine
Click to expand...
Click to collapse
This one also did not solve the problem. Any other suggestions!

Problem solved
As I guessed, it was a network error and problem sovled after changing my Sim Card and getting a new updated one from the Service Provider!
Now my TD2 can sleep well and get back whenever called

6.5 is out, has been out for a while now for the TD2...What are you waiting for, might solve this issue...gogogo!

Free Man said:
6.5 is out, has been out for a while now for the TD2...What are you waiting for, might solve this issue...gogogo!
Click to expand...
Click to collapse
I have the same problem and i notice that sleep everytime who i use Alarm(clock)...
Noticed that??????

Some times alarm clock sound doesn't work.... the audio level is high...

Free Man said:
6.5 is out, has been out for a while now for the TD2...What are you waiting for, might solve this issue...gogogo!
Click to expand...
Click to collapse
I am afraid I have to bump the thread.. I received my device from the HTC service with a new 6.5 ROM installed, and I started having this problem. The deviced sleeps and does not react to pressing Power button, neither to pulling the stylus. The only way how to wake it is to remove the battery and switch it on again. Any idea how to solve this?

The same problem
cassper1 said:
I am afraid I have to bump the thread.. I received my device from the HTC service with a new 6.5 ROM installed, and I started having this problem. The deviced sleeps and does not react to pressing Power button, neither to pulling the stylus. The only way how to wake it is to remove the battery and switch it on again. Any idea how to solve this?
Click to expand...
Click to collapse
My TD2 starts the same problem . After some standby time the power button stops working. I tryed to re-flash ROMs , Hard Reset, Change the battery, and nothing solve the problem. The Power Button not working! The only way is soft reset... Any idea?

This is referred to as the "Standby of Death"
The only fix I am aware of is to flash a custom ROM.

hello guys. there is no need to flash a new rom. i had same issue, but hard reset and backup restore helped me. try this on your phone. for back-up, use sk tools
http://www.s-k-tools.com/index.html?sktools/m_feat.html

Sleep of Death" on (almost) every recent custom & stock ROM

Wouldn't open up a thread for this question but any custom ROM (RECENT EDITIONS) I've tried (NRGZ's, Sergio's, Ark's, Athine's and some others) for several days now have the "dead aka black" screen issue. Tried to find an answer in the original ROM-threads but haven't got any substancial responses. It seems like only few people have these issues. This would make me think the problem is my hardware (German Generic TP2) but the older ROMs of same chefs then run normal and without the dead screen issues.
Please any ideas, solution suggestions or experience share?
Thanks! Ibster
Edit: confirmed solution method described in post# 10 http://forum.xda-developers.com/showpost.php?p=5934002&postcount=10 . Thank you agent 47 big time for the tool you provided!

Ibster said:
Wouldn't open up a thread for this question but any custom ROM (RECENT EDITIONS) I've tried (NRGZ's, Sergio's, Ark's, Athine's and some others) for several days now have the "dead aka black" screen issue. Tried to find an answer in the original ROM-threads but haven't got any substancial responses. It seems like only few people have these issues. This would make me think the problem is my hardware (German Generic TP2) but the older ROMs of same chefs then run normal and without the dead screen issues.
Please any ideas, solution suggestions or experience share?
Thanks! Ibster
Click to expand...
Click to collapse
Is this the same as the "Sleep of Death" (SOD)? In which the phone won't wake from sleep/suspend state and has to be soft-reset?
If not, what's the symptom exactly?

MCbrian said:
Is this the same as the "Sleep of Death" (SOD)? In which the phone won't wake from sleep/suspend state and has to be soft-reset?
If not, what's the symptom exactly?
Click to expand...
Click to collapse
that's exactly what I'm talking about. I didn't know it was called the "sleep of death". I jusst have to softreset the phone all the time. The phone becomes just unuseable.

Ibster said:
that's exactly what I'm talking about. I didn't know it was called the "sleep of death". I jusst have to softreset the phone all the time. The phone becomes just unuseable.
Click to expand...
Click to collapse
i also experience it on my Tilt 2 AT&T unlocked, so i reverted back to Sense 2.1 Euro 1.86.401.0. any solution there, i bought mine from Negrielectronics USA.

Ibster said:
that's exactly what I'm talking about. I didn't know it was called the "sleep of death". I jusst have to softreset the phone all the time. The phone becomes just unuseable.
Click to expand...
Click to collapse
i also exprence it on my Tilt 2. is there any help out there

It's because chiefs have updated their XIP. Ask them to cook a rom for you with the old XIP from stock HTC WM6.5 Sense 2.1 rom.
Ach, that's just my theory based on my experience. I might be wrong, so keep that in mind.

I have a similar issue, but not exactly the sleep of death
A lot of times when I unlock the phone, Sense would not show up, only the taskbar and occasionally the bottom bar
Everything is responsive, the taskbar notification works, hardware buttons works, but not the sense part in the middle
This usually happens when I'm having an SMS conversation
I run this setup most of the time:
WM 6.5.x
Sense 2.5
HD mini lockscreen with Smartlock 2.0F or Lockdevice 1.6

Same here on the SMS black screen
ctbear said:
I have a similar issue, but not exactly the sleep of death
A lot of times when I unlock the phone, Sense would not show up, only the taskbar and occasionally the bottom bar
Everything is responsive, the taskbar notification works, hardware buttons works, but not the sense part in the middle
This usually happens when I'm having an SMS conversation
I run this setup most of the time:
WM 6.5.x
Sense 2.5
HD mini lockscreen with Smartlock 2.0F or Lockdevice 1.6
Click to expand...
Click to collapse
I just started having this problem with the newest Leo Cell Pro, I have not had it with any NRG or Deep Shinig ROMS though but I do like The cell pro details and the others are not without there faults. I like your screenshots and I can hardly wait for that new white theme to come out. I think it will make my phone so much better outdoors and enhance the Windroid look I am workin on.

Apical said:
I just started having this problem with the newest Leo Cell Pro, I have not had it with any NRG or Deep Shinig ROMS though but I do like The cell pro details and the others are not without there faults. I like your screenshots and I can hardly wait for that new white theme to come out. I think it will make my phone so much better outdoors and enhance the Windroid look I am workin on.
Click to expand...
Click to collapse
Yes....interesting that I've never had this issue on Energy's...my guess is he doesn't cook in the latest HTC SMS client which can be unstable at times
Are you talking about Elcondor's GTX theme? Yes that is a very awesome theme
I couldn't wait until 201x version comes out so I made my own Not as good as GTX but I'm half satisfied now

Apical said:
I just started having this problem with the newest Leo Cell Pro, I have not had it with any NRG or Deep Shinig ROMS though but I do like The cell pro details and the others are not without there faults. I like your screenshots and I can hardly wait for that new white theme to come out. I think it will make my phone so much better outdoors and enhance the Windroid look I am workin on.
Click to expand...
Click to collapse
like i mentioned in the the post#1 I had these problems with almost all recent (last two weeks) custom ROM releases, ROMs of different chefs. Because others or the majority of people don't have any problems with that I thought the reason must be hardware issues. yesterday I saw this thread http://forum.xda-developers.com/showthread.php?t=649191 opened by agent_47 where he provides a modified tool:
agent_47 said:
when u flash a rom, you are copying files onto the internal memory (like duh!) but if u repeatadly flash different roms, sometimes files from older version stays behind as when u flash a rom, you just copy and sometimes overwrite files without deleting the older ones. hence at times these older files may create bugs\instability. hardrest donot always fix it.so we use MTTY
Click to expand...
Click to collapse
Well I used it and have flashed to Sergio's Leo Cell Evo 6 and I can confirm that I haven't had any "sleep of death" issues, well still haven't and hope I won't have this "SOD" issue anymore. And when I tried this same ROM before I wasn't even able to make a proper configuration and set up the phone because the phone always froze or as soon the screen went off I wasn't able to activate it back without soft reset.
So maybe this is a solution and could help others who also are having this issue of "sleep of death".
Please if you try the tool from the mentioned agent_47's thread, let know us here because it will be very useful for the rest of the users to finally figure out "the dark side" of their phone and fix it.
Cheers, Ibster

Solution
I had this just recently. Funny side was that I installed an official new ROM from HTC which I just updated. Somehow the phone just didn't want to turn on and show the screen. So just like you guys said, hard-reset did the thing but just when the screen went off, same thing happened.
So what I did was wipe/clean or any other name. Practically did the installation of the rom again. Now, the device works normally and without any problems.
Maybe this happens because some old files of older ROMS sayed on the device itself and started making problems. Anyways, check this thread too, maybe it will explain something more: http://forum.xda-developers.com/showthread.php?t=649191
Or, final explanation. Our Rhodiums have soul inside their little chips and they just simply fu.k with us They tell us they're too tired of so many ROM changes.

I have also had this problem with my two latest official swedish roms (manilla 2.1 and 2.5) cant remember if I had it when I used 6.1. Now I use a cooked rom and still have the issue several times a week. The only thing I had done with my Rhodium before using cooked Rom was flashing hard spl for future use. If its not an inbuilt hardware/software problem from the beginning the only thing I can point at in my case is hard spl?

Originally Posted by agent_47
when u flash a rom, you are copying files onto the internal memory (like duh!) but if u repeatadly flash different roms, sometimes files from older version stays behind as when u flash a rom, you just copy and sometimes overwrite files without deleting the older ones. hence at times these older files may create bugs\instability. hardrest donot always fix it.so we use MTTY
Click to expand...
Click to collapse
back with my kaiser you always had to flash back to stock before going to a new ROM no matter what, for just this very reason...
could flashing back to stock be a 'best practice' that we as users should start doing to help with this issue?

I - have had some xperience with the issue in a few ROMS. Im a loyal flasher of Agent 47s masterpieces. And a month or so ago he had like 2 or 3 builds that had this issue. From what I remember he said that he thought it had to do with some sys evrybody was using to cook roms. and after her came out with this diagnosis and "fixed"(i dont know the technical part of what was fixed) this problem it has never happened since. But a good thing I would say to try is in Agents thread about 4 or so pages from the last page(maybe more or less) but close to the last page he posted a .zip file for this mitty fix. and you essentially flash this zip just like a rom then reflash which ever rom you had or a new one and ta da. Ive also heard of people reflashing a stock rom with results from doing so but from what Agent said is flashing a stock rom then back technicaly "shouldnt" do anything and to definately use mitty. But one of the other frequent valkyrie users that I chat with all the time Mcbrian who posted here on the first page has used the stock rom and did have whatever issue he had cured dont remember what that was tho.
UPDATE- Oh I guess that Agent has a thread for Tool29 so you dont have to search through his thread to find it.

I can confirm agent 47 method is working for me. I no longer have the sleep of death. But its only been half a day. I will report back in a few days.

aichemist said:
I can confirm agent 47 method is working for me. I no longer have the sleep of death. But its only been half a day. I will report back in a few days.
Click to expand...
Click to collapse
Great! I'm glad to hear your confirmation. I now on my side haven't had a sleep of death for three days on the ROM (Cell Leo V6) that previously, before I used the agent_47's tool, couldn't even start normally at all or had extremely many "sleeps of death". But I also noticed overall improvements even though the speed slows down but there are barely any freezes and stability is much better.
Cheers, Ibster

aichemist said:
I can confirm agent 47 method is working for me. I no longer have the sleep of death. But its only been half a day. I will report back in a few days.
Click to expand...
Click to collapse
I did tried agent 47 method at least three times this weekend. I did exactly what agent 47 instructed, flash Energy ROM 23547 with MaxManila = failed to initiated. Flash Tool29 again, reflash Energy ROM 23545 from MicroSD = Failed. Flash Athine OS XTreme = Worked, install MaxManila 3.0 on top of Athine OS Xtreme = Corrupted the manila display. Reflash stock ROM. Flash Deep Shining X.23544 = Worked. Flash Deep Shining X.23547 = Failed.
Look like I can get my phone to work but can't move on from now on! Any suggestion is greatly appreciated!
Thanks

kienkham said:
I did tried agent 47 method at least three times this weekend. I did exactly what agent 47 instructed, flash Energy ROM 23547 with MaxManila = failed to initiated. Flash Tool29 again, reflash Energy ROM 23545 from MicroSD = Failed. Flash Athine OS XTreme = Worked, install MaxManila 3.0 on top of Athine OS Xtreme = Corrupted the manila display. Reflash stock ROM. Flash Deep Shining X.23544 = Worked. Flash Deep Shining X.23547 = Failed.
Look like I can get my phone to work but can't move on from now on! Any suggestion is greatly appreciated!
Thanks
Click to expand...
Click to collapse
I'm not very clear about what you mean by failed. Do you mean you can't flash some of the ROMs or you get screens of death with them?
What I did was this: I took out the SD card. Ran the tool29 modified by agent_47 (see post 10 of this thread). After the tool finished cleaning all internal memory the phone went back on but got stuck in loading. I took the battery out of phone for few seconds and then put it back in. Then I connected the USB cable to the phone and started it in the bootloader mode by quickly pressing and releasing the switch button and then hitting the volume down. On the tricolor screen then it shows USB. Then I just flashed my ROM of choice normally with USB without need to flash from SD. I've done this several time with several ROMs without problems.

Ibster said:
I'm not very clear about what you mean by failed. Do you mean you can't flash some of the ROMs or you get screens of death with them?
What I did was this: I took out the SD card. Ran the tool29 modified by agent_47 (see post 10 of this thread). After the tool finished cleaning all internal memory the phone went back on but got stuck in loading. I took the battery out of phone for few seconds and then put it back in. Then I connected the USB cable to the phone and started it in the bootloader mode by quickly pressing and releasing the switch button and then hitting the volume down. On the tricolor screen then it shows USB. Then I just flashed my ROM of choice normally with USB without need to flash from SD. I've done this several time with several ROMs without problems.
Click to expand...
Click to collapse
Thanks for quick response. Yes. I did exactly what you spelled out in the message. i.e: Remove the memory card, Run Tool29, remove the battery, got into the bootloader mode, then flashed with USB connection. The phone went to the initial setup, I clicked the T-Mobile connection ....etc... then it restart - then stopped at "Launching HTC Sense...." This is = failed for me. i.e: Failed to clean the internal memory!
By the way, if the internal memory is cleaned, shouldn't the Start->Setting->Device Information->Software Information: Incoming Call & Outgoing Call reset to 0?
Thanks

kienkham said:
Thanks for quick response. Yes. I did exactly what you spelled out in the message. i.e: Remove the memory card, Run Tool29, remove the battery, got into the bootloader mode, then flashed with USB connection. The phone went to the initial setup, I clicked the T-Mobile connection ....etc... then it restart - then stopped at "Launching HTC Sense...." This is = failed for me. i.e: Failed to clean the internal memory!
By the way, if the internal memory is cleaned, shouldn't the Start->Setting->Device Information->Software Information: Incoming Call & Outgoing Call reset to 0?
Thanks
Click to expand...
Click to collapse
Your steps should be
1. Shutdown tp2..
2. Remove memory card( I also removed sim card).
3. Turn on tp2, connect through the computer through active sync.
4. Run task 29. Let it load flash, whatever it is doing until it actually reboots.
5. At this point, everything should be cleaned, you don't have a rom or radio anymore, so its blank, so you "pull battery out."
6. Put memory card/sim card back in. Flash radio through boot whatever menu. Soft reset it yourself. Pull battery out again.
7. Flash rom this time, and soft reset it again. Now rom should start setting up.
This shouldn't be rocket science.

[FIX][08.04.2011]Patch for "Screen won't come on after device wakes" (RHO_S2_00895)

[FIX][08.04.2011]Patch for "Screen won't come on after device wakes" (RHO_S2_00895)
Problem: Device doesn't come back from suspended mode. Pressing the power button, sliding out the keyboard or taking out the stylus does nothing.
Occurrence: Random.
Quick fix: None known.
Request: Kinda all over the Rhod forums.
Affected ROMs: HTC Stock S2 2.07, all custom roms based on 2.07 drivers. Probably 2.10 drivers are partly affected too.
Patch:
For stock roms (standard HTC patch package, .exe)
For custom roms (download this if you're unsure, works for stock roms too)
For cooks (extract and put into OEMDrivers)

Thanks!
Let's see (in time) if the SOD's are finished for us.

HRQ.SLV said:
Thanks!
Let's see (in time) if the SOD's are finished for us.
Click to expand...
Click to collapse
It must be a matter of settings or hardware, I never suffered from SoD.

Jackos said:
It must be a matter of settings or hardware, I never suffered from SoD.
Click to expand...
Click to collapse
That's because youre a great cook!
This thread should be sticky...

HRQ.SLV said:
That's because youre a great cook!
This thread should be sticky...
Click to expand...
Click to collapse
Not only this one should be sticky...

.......Done

Installed. Didn't work . I think the flex cable is crapping out. Also had the problem where if the screen was fully slid, it'd black out. Now it's been like that every postion.
Although, the power button works to turn the screen off, it won't turn it back on.

It doesn't work for me either
The only thing that I was able to install on my Tilt 2 (latest stock ROM) was this file Jackos RHO_S2_00895.cab
Nothing changed.
The screen goes on but what stays off is the backlight and the only way to get the backlight to stay on in a reboot. Then try to adjust the brightness from the settings menu and moving the slides doesn't do anything. The brightness stays to the max no matter what.
Is it the light sensor? can it be disabled or checked somehow?
Thanks anyway I hope your fix helps others,
G

Jackos said:
It must be a matter of settings or hardware, I never suffered from SoD.
Click to expand...
Click to collapse
Thanks for sharing...I have had SOD only with certain builds...its been a while since I had one...

KnightmareCS said:
Installed. Didn't work . I think the flex cable is crapping out. Also had the problem where if the screen was fully slid, it'd black out. Now it's been like that every postion.
Although, the power button works to turn the screen off, it won't turn it back on.
Click to expand...
Click to collapse
Does it sometimes don't come back or always?
SoD, Sleep Of Death, so called the hangup issue does happen only after the device is suspended for a long time. It does occur kinda often, but not always if you turn off the screen. If your device never comes back from standby it isn't a problem with SoD for sure.

That would be my [email protected] cable....
KnightmareCS said:
Installed. Didn't work . I think the flex cable is crapping out. Also had the problem where if the screen was fully slid, it'd black out. Now it's been like that every postion.
Although, the power button works to turn the screen off, it won't turn it back on.
Click to expand...
Click to collapse

bisanti said:
The only thing that I was able to install on my Tilt 2 (latest stock ROM) was this file Jackos RHO_S2_00895.cab
Nothing changed.
The screen goes on but what stays off is the backlight and the only way to get the backlight to stay on in a reboot. Then try to adjust the brightness from the settings menu and moving the slides doesn't do anything. The brightness stays to the max no matter what.
Is it the light sensor? can it be disabled or checked somehow?
Thanks anyway I hope your fix helps others,
G
Click to expand...
Click to collapse
The exe file (for stock roms) is intended to work on Europe roms. I have no knowledge of HTC releasing this patch for other regions.
It's no fix for any problem with the phone The patch doesn't even touch the backlight thing.

Jackos said:
Does it sometimes don't come back or always?
SoD, Sleep Of Death, so called the hangup issue does happen only after the device is suspended for a long time. It does occur kinda often, but not always if you turn off the screen. If your device never comes back from standby it isn't a problem with SoD for sure.
Click to expand...
Click to collapse
It happens all the time. I turn the phone on via the power button. Boots up. Let it sit till backlight goes off. Press power button, nothing happens.
I can turn the phone on, press the power button to turn the backlight off and when I press it again, nothing happens.
Wild Child said:
That would be my [email protected] cable....
Click to expand...
Click to collapse
I do not think it's a flexcable problem. If I can turn the screen off and power on the device with the 'power button', it has to be something software.
I have to check again if the device comes back on, but with really really low backlight.
It's annoying, I have to restart to see a text, missed call, etc.
Thanks for your help so far.

Won't wake up
I tried loading this patch after doing yet another hard reset to try to recover from these outages. It doesn't work. Within an hour of installing it, the problem came back. My specific problem is the system goes to sleep after a minute, and it usually comes back with the power button. But after normal usage for awhile (sometimes hours, sometimes weeks without a problem), it goes to sleep and needs a red-button-reset to turn back on. Then as soon as it goes to sleep again after powering up, it's off forever. The only real recover after reaching this "cycle of death" is a hard reset (full memory erase, back to factory settings). Then it will work normally again for awhile.
I'm not sure if this is exactly the problem the other submitters were seeing, but it is surely related.
I'm off to do yet another factory reset. WM 6.5 is not worth a tinker's damn.
(AT&T Tilt 2 with ROM 2.10.502.4)

pbarschall said:
I tried loading this patch after doing yet another hard reset to try to recover from these outages. It doesn't work. Within an hour of installing it, the problem came back. My specific problem is the system goes to sleep after a minute, and it usually comes back with the power button. But after normal usage for awhile (sometimes hours, sometimes weeks without a problem), it goes to sleep and needs a red-button-reset to turn back on. Then as soon as it goes to sleep again after powering up, it's off forever. The only real recover after reaching this "cycle of death" is a hard reset (full memory erase, back to factory settings). Then it will work normally again for awhile.
I'm not sure if this is exactly the problem the other submitters were seeing, but it is surely related.
I'm off to do yet another factory reset. WM 6.5 is not worth a tinker's damn.
(AT&T Tilt 2 with ROM 2.10.502.4)
Click to expand...
Click to collapse
It's a pity that it doesn't work for you. This is a patch for Europe branded devices, I don't even see the fix at any other region-based HTC support site.
Personally I never experienced SoD, so I cannot guarantee that it does work. All I know is that this fix is supposed to help with "constant hang". Whatever it is. It's a official fix and I didn't encounter any problems with running it on my Europe branded Rhod.

Jackos is this in your ROM? I have found several times my TP2 needs a reset as the power button does not bring it life. If I take the stylus out (when this happens) the row of keys light up, but still the display is blank. I assume it's already in your ROM (Jackos S3 1.1.2 SleekBASIC) otherwise I would have installed it.

It's going to be included from version 1.1.3 and up.

Jackos said:
It's a pity that it doesn't work for you. This is a patch for Europe branded devices, I don't even see the fix at any other region-based HTC support site.
Personally I never experienced SoD, so I cannot guarantee that it does work. All I know is that this fix is supposed to help with "constant hang". Whatever it is. It's a official fix and I didn't encounter any problems with running it on my Europe branded Rhod.
Click to expand...
Click to collapse
So...how do I uninstall it? I am on sprint in the US and have the latest official win 6.5 ROM and downloaded this update on my phone through a tech website and after installing it none of my keys works except for the power button. Apparently being for Europe it has corrupted my phone and none of the talk, end, windows, back or keyboard buttons work now. I need to revert this update, is there a way without doing a hard reset. I don't want to reconfigure all my settings that aren't backed up.

scottandmo said:
So...how do I uninstall it? I am on sprint in the US and have the latest official win 6.5 ROM and downloaded this update on my phone through a tech website and after installing it none of my keys works except for the power button. No talk, end, windows, back or keyboard buttons work now. I need to revert this update, is there a way without doing a hard reset. I don't want to reconfigure all my settings that aren't backed up.
Click to expand...
Click to collapse
If anything really fails, navigate into /Windows/ directory using your favorite file manager and "delete" those two files:
Code:
debuglog.dll
HtcPm.dll
Probably deleting the second file should fix your keyboard issues.

Jackos said:
If anything really fails, navigate into /Windows/ directory using your favorite file manager and "delete" those two files:
Code:
debuglog.dll
HtcPm.dll
Probably deleting the second file should fix your keyboard issues.
Click to expand...
Click to collapse
Deleting the HtcPm.dll and rebooting fixed it, Thanks! I'm assuming that won't have any other side effects...

[Q] TD2 Problems/Dead

Hi i have a Touch Diamond 2 and am having some serious difficulties!
I've had the Energy ROM installed for about 3 months and all has been good until Sat.
My phone was hanging with the turn on screen(htc across middle) when i tried to turn it on and would just stay like that until i removed battery.
To solve the issue i have tried installing new ROM's with varying success. I have tried un grading to the new Energy ROM and it seems to work for a bit then turns itself off and wont turn back on until i remove battery again. I've also tried going back to the official ROM's. The WM 6.1 version does the same as the Energy ROM and the WM 6.5 one is even worse as it continues to give me the start up screen as before!
Is my phone dead or do i need to do something to get it back working again?
Any help would be much appreciated.
Cheers Sean

Sounds to me like the NAND is dying.. or just corrupted. Try HardSPL instead of ROMs. Possibly the bootloader is bad.

Cheers for the quick reply, I have just re-done the HardSPL to 2.51 now running with it and Energy ROM. Will see long long it works for but not overly optimistic the now! Will keep you updtaed.
Sean

Nope thats it turned itself off already! Bloody annoying!!!!!!

Is your SD card ok,sometimes these things happen when windows is not able to communicate with the sd card properly.