hi,
i have a problem with e-mail. i cant send or receive email after install new ROM. i tried lost of different ROMs but still not working...
is there any one who lived this problem before???
I don't think this message is in the right forum - X1 General?
Sounds like you don't have your internet access configured properly. Can you get onto internet with Opera/PIE?
The autoconfig does not do a very good job of setting up the connection in my experience. Go into settings/connections and edit the configuration with the access point/username etc that your operator gives you.
hi Paul,
i can access Internet. i can get weather information.. the only problem is E-mail.
everything is working...
and operator settings is configuring automatically. Vodafone TR...
hi Paul,
i can access Internet. i can get weather information.. the only problem is E-mail.
everything is working...
and operator settings is configuring automatically. Vodafone TR...
i also did connection settings manually.
Related
OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
xcom923 said:
OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
Click to expand...
Click to collapse
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
dwny said:
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
Click to expand...
Click to collapse
I'm sorry I thought I was providing enough info. I used the network config ROM that was built in to most of the windows 6.1 ROMs but I also used the "default" settings from att. (I ment defauld because that is what att shipps)
But if you want more info here is my network settings
When I first hit "connection settings" I have in bold "MY ISP" and "My Work Network"
if you go to manage "MY ISP" it has the config for att's isp. here are the settings:
Access Point Name: isp.cingular
UserName: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
Under the "Advance" tab I have 3 choices for each drop-down menu they are "My ISP" (which is selected for the top "programs automatically connect to the internet"), "MEdia Net", and "My Work Network" (which is selected for "programs that automatically connect to a private network)
the "MEdia Net" settings are as follows (and I have switched between using ISP and MEdia net in the drop down menu for internet and get the same problem)
Access Point Name:wap.cingular
User Name: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
I hope that is enough info like I said earlier my roms is currently DCS v1.7 and I'm running radio 1.64 as a side not it doesn't seem like my GPS is working correctly since it hasn't found a lock in 5min. But I think I've found the thread to help me with that. Again I'm having trouble with only syncing my e-mail althouth internet works just fine
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
ChumleyEX said:
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
Click to expand...
Click to collapse
that's actually the first time I heard something about proxy settings. Where is that cab just in case (I'm willing to try anything)
I didn't use that cab but I did try Cingular PDA MediaNet MMS Settingsv2.cab
it should be attached.
EDIT
I know what solved my problem, paying a past due bill.
Problem Solved
OK, one piece of info that I didn't realize was important was that I am on the unlimited MEdia Net plan (which uses WAP.CINGULAR.COM) and the PDA plan, which is way more expensive uses ISP.CINGULAR.COM apparently I needed to change any network that was WAP and change it to ISP to get my pda to use things that I guess are usually covered in the PDA Data plan.
Thanks for your help everyone and I hope this can be used for someone else as well. long story short.....
media net=wap.cingular
pda plan=isp.cingular
hi there really silly question, ive noticed when i flash a rom it installs and then afterwords sets up the device and picks up what network I'm on and adds the settings for wap/gprs mms etc, i was wandering if there's a way of getting this in one cab or how i would go about making it, reason i ask is i have several pda devices that don't work for mms even tho they should thanks
thanks for any help
Not really sure what your question is.
How to make a cab?
How to automatically connect many devices to your network?
How to configure settings?
There are several Wikis and FAQs to get you started. Read grasshopper, and see my sig. Good luck!
I think he wants to be able to export his settings (wap / mms / proxy etc...) into a CAB in order to import it after flashing his phone or to import it into another phone.
If you have a common provider (ATT / Vodaphone / SFR etc..), the easiest way is probably just to use the Automatic Connection Setup / Network Wizard that will set up all those settings automatically for MMS, WAP etc..
Help
Pls can anybody help with network wizard for HTC kaiser,my network service provider is MTN NIGERIA,pls i would be happy if anyone does this for me.My mail addy is [email protected].
Info:
- HTC Diamond US Version 3G/Quadband
- AT&T Sim card w/ active data plan
Problem:
- Cannot connect to internet. Exchange server does not sync.
When I try to go to say google within Opera or IE it does not connect. Opera gives me this red screen saying unable to access network.
I am however able to use the phone and send/receive text messages.
Troubleshooting:
- Called HTC, no help
- Called AT&T, don't support the phone, no help
- Best Buy sells the phone so I went in there, no help.
- Went to an AT&T store, no help
- Search function within this forum didnt reveal anything.
- I did take my SIM and try it in another HTC Diamond and same thing. So I am ruling out the phone being the problem.
Note: this SIM card works like a charm in my Samsung Blackjack2 and my Jailbroken iPhone.
PLEASE somebody help me!!!
I am pretty tech savvy and have been searching the net for 2 days.
If you need more info, please ask. Could be a data connection settings that i need to manual input?
~ Phillip
Help us out. What are your internet settings? Did you run the setup wizard for AT&T?
I inserted the SIM, followed instructions, set it up to autmatically detect AT&T settings.
I sets up the connection as Media Net which i believe is right.
I actually just had my first advance. I was able to get internet by removing the proxy server from the Media Net connection.
So internet is solved. Just trying to figure out how to sync with my exchange. Which i have done with other phone a dozen times with no problems (so i know my user name, pass, domain and stuff are accurate)
What else do you need to know.
Every setting
I read this in another thread:
I tried the connection wizard and couldn't get online. I deleted the connection and manually setup a connection called Cingular GPRS:
Cellular Line (GPRS, 3G)
wap.cingular
User: [email protected]
PW: CINGULAR1
That's it. No domain or advanced server settings.
that enabled internet for me. not able to sync my exchange server still. small chance it could be something small i am doing wrong.
Where can I locate "edit account setup"???
taken from this -
For e-mail, you have to edit the "Advanced Server Settings" under "Edit Account Setup". There is a drop down box "Network Connection." I believe it defaults to "The Internet" which never works for me. You can either change it to Media Net or a custom connection if you make your own.
YouTube doesn't work with the Media Net connection because of the proxy. You can either disable the proxy in the Media Net connection or create a new connection that has the proxy disabled. I usually do option 2 and create a "No Proxy" connection that is identical to Media Net except no proxy. (I like to leave the Media Net w/Proxy just in case I need to access some AT&T thing.) I then set all apps to use the "No Proxy" connection (mail, MMS, etc)
Problem Solved.
Solution:
Once you insert the SIM and follow the setup. NOTE: the setup provided for Media Net is not correct. Follow my steps in post #5 by deleting the Media net and making your own.
Once this is done, then you will have access to the internet. Then you can setup your email exchange.
If you setup your email exchange first, it will not work. Follow steps in Post #5 then go back and erase your mail account. Start a new account and bingo.
Hope this helps some newbies like me.
~ Phillip
I have a Xperia X1 which was bought from Vodafone so comes with all their rubbish. I've put my T-Mobile sim in (voda's x1 isn't simlocked) and setup all of the connections. The internet through the opera browser works, as does everything else whoch uses the internet. However Windows Live still continues to try and use the default Vodafone settings.
How can I change Windows Live to use the T-Mobile settings I have setup? I can't modify the "My ISP" or "WEB" connection's as they are "pre-configured and cannot be modified" and it it those which windows live tries to use.
Thanks.
You need to edit the registry HKLM\Comm\ConnMgr\Destinations\WEB and My ISP \Read Only set to 0. Then go into settings\connections\connections\my ISP and add your settings. You will also need to go into advanced\select networks and change it to WEB and edit and do the same.
Don't forget to remove the vodafone proxy information from the proxy tab.
My O2 sim card is working fine now with hotmail, aol and exchange
Vodaphone branded wifi connection
Hi, im on o2 aswell and got the voda branded handset everytime i try and connect to windows live or msn etc it tries to connect to gprs wap or something and i want it to use my wireless from home ive read up about it and its something to do with registery or something right?
Hi All,
Just a quick noob question if someone would be so kind!
I have amended the registry setting on my X1 in order to get skyfire working. I was wondering if someone could explain to me what the 'This network uses a proxy server to connect to the Internet' setting does and what the entry 212.183.137.12 refers to??
Many Thanks
Reb
hi.. can you please tell me the whole procedure.. how to change the registry.. how to go to HKLM?
eyebeebe said:
You need to edit the registry HKLM\Comm\ConnMgr\Destinations\WEB and My ISP \Read Only set to 0. Then go into settings\connections\connections\my ISP and add your settings. You will also need to go into advanced\select networks and change it to WEB and edit and do the same.
Click to expand...
Click to collapse
Thank you.
Just over 2 years later and your post has helped me with a problem on my Omnia 2!
I'm getting some MMS's from some friends and am having a problem opening them on my tilt. They show up in my inbox, and need to be "downloaded" I select download and nothing happens?
What am I missing?
NG,
You need to setup MMS GPRS connection following your provider's instructions.
What ROM are you using....some of the newest ROMS have a completely different setup screen then others. You might have some settings blocked that your not used too
I'm using one of Alex's roms v5.20.
"You need to setup MMS GPRS connection following your provider's instructions."
I believe the settings are correct we are talking about MediaNet correct?
So, what should happen when I click "download" should it open the attachment automatically?
TW,
Can I retrieve MMS over the internet if connected via the USB?
TW,
Usually you have a 2nd connection on the phone dedicated to MMS, next to the one used for internet. Then, you also have to configure the mail app to use that connection.
MMS usually can't be downloaded through the net, but this depends on your provider. Mine can forward them to my email.