Hi,
there is a problem with my device, which is in inaccurate reading of the display position. When I touch it somewhere, the device reads a different position what makes it completely unusable.
I tried a hard reset, recalibrated many times and nothing helped.
I wonder if e.g. anything like rewriting the internal rom by factory default would help, but I do not now where to get it and how to make it. Anyway, I am not sure it this could really help.
Does anyone experience such a problem? And do you, guys, have any idea how to repair it? Thanks very much,
Adnan
Related
I have an O2 XDAIIi that turns on and just stay at aligning page and X point just keeps moving around and around after I press it. It will not go pass that page. Anyone knows how to repair this problem, please help...Thanks
I have the same problem... Anyone know how to solve???
xda11i screen align freeze
I have the same problem. so do many others. i have seen no reasonable fix. i have gone into bootloader mode and hard reset as suggested elsewhere but no good.
please help. Anyone????????
i have a same problem...pls help !!!
Thanks
Get it looked at, could be a touchscreen problem.
Reflash the Rom, if data got corrupt, it is electrical after all........
I reflashed many times, but same effect :S The touch screen is working, because when i touched the cross moving, but repeated again.
Thanks anyway.
Hi Guys,
My apologies if this has been posted already, but I couldn’t seem to find anything on it.....I have had my Diamond for about 2 weeks and the camera hardly ever works. 90% of the time when i start it all i get is the Photo logo and then a blank screen. If i push the capture button, a few seconds later I get the error "Unable to capture photo. Unable to get frame data from camera device". I have done the latest HTC official update to ROM 1.93, I have soft reset and hard reset and no luck Sometimes if I do a soft reset it will work for a little bit and then just stop working again.
Any advice would be greatly appreciated!!
Thanks
Grim
you may need to install one of x-dev custom ROMs, or try hard reseting your diamond. if the problem still exist after Hard Reset, probably it is hardware trouble.
read read and read before you install Cooked roms from xda-developers. you need to do HardSPL before instaling any other ROMs
Thanks for the response!
I have hard reset the device a few times, and no luck. I dont reallt want to install a cooked ROM, I dont think I can handle it to be honest. I will take it that it is a Hardware fault and I will be sending it back tmrw. Thanks again!
Hi Grim! I have the same problem. I've installed 1.93 official ROM and even SwiftBl 7.5, I've upgraded my Radio From .05 to .08 , but my camera is still like yours.
Have you find a solution? Did HTC service Center change your device?
Thanks..
İ have the same problem and could not find a solution for it...
Dear All,
I have same problem. Camera crashes after 1 or two photo. I have black screen.
Tried many Rom's. no fix .
How could you fix ?
anyone got a solution for this problem?
is the diamond camera hopless?
no solution for this error till now?
This issue realy bugs me now. Every time I've change the OS it work for a bit then it dies. realy anoying. Anyones suggestion may be usefull.
If it is the hardware - is it the camera? Could it be just gone loose?
There´s few steps to take.
If camera works sometimes, I think, it´s not a camera problem on itself.
(IF YOU HAVE ACCESS TO PARTS AND YOU KNOW WHAT U`RE DOING)
Try this:
Exchange flex and flash (use official RUU htc).
Or:
Put phone inbootloader, disconnect flex from board (while working and booloader on) and flash.
If everything else fails, I´m affraid the PCB has internal flash IC problems.
Dont have parts but will open it and check flex. If flash is gone how come mtty does not flag some segments as bad. Checking around the web looks like I am not the only one with this problem.
all you Coders... please help us with the camera issue.
Hey guys..
this camera for touch diamond is screwing..
tried various methods.. flashed everything possible..
still no luck..
if any xda user outthere.. who has the solution for this problem..
please help up..
my device is out of warranty..
thanks
I've found out if you take the battery out for 10 secs and put it back the camera works again untill you run another app. It feels like as soon as you run something else with camera it is screwed!
Hi I've looked around and wasn't able to find an answer.
I've had the Diamond for about a week and it seems to freeze on me atleast a couple times a day. The only way i can get it back is if i take off the battery cover and do a soft reset from there.
If someone tell me where i can find the answer to this fix or even if someone can tell me how to fix this problem i would really appreciate it.
Also would this problem stop if i flashed it with a new rom? and if yes and someone knows which rom is the best for the Telus network, I would greatly appreciate it.
Thanks for any help at all guys!
Hi, have you noticed any particular patterns for the crashing? Any particular software being used?
By the way, "brick" tends to mean permanently dead, for example after a bad flash:
http://en.wikipedia.org/wiki/Brick_(electronics)
Well actually nothing in particular and plus i have lots of ram to spare as well when it does this. Like anywhere from 120mb to 150mb free ram.
not sure if anyone else is having this problem, i mainly hate the freezing because of the soft reset button being under the battery cover, was so much easier on my old titan
izuzu said:
Hi I've looked around and wasn't able to find an answer.
I've had the Diamond for about a week and it seems to freeze on me atleast a couple times a day. The only way i can get it back is if i take off the battery cover and do a soft reset from there.
If someone tell me where i can find the answer to this fix or even if someone can tell me how to fix this problem i would really appreciate it.
Also would this problem stop if i flashed it with a new rom? and if yes and someone knows which rom is the best for the Telus network, I would greatly appreciate it.
Thanks for any help at all guys!
Click to expand...
Click to collapse
i'd try a hard reset. i'm assuming you know what the entails. usually fixes strange issues for me when a solution is not immediately available. but someone more brainy will have a solution for you later. i'm not at all familiar with cdma diamonds.
izuzu said:
Hi I've looked around and wasn't able to find an answer.
I've had the Diamond for about a week and it seems to freeze on me atleast a couple times a day. The only way i can get it back is if i take off the battery cover and do a soft reset from there.
If someone tell me where i can find the answer to this fix or even if someone can tell me how to fix this problem i would really appreciate it.
Also would this problem stop if i flashed it with a new rom? and if yes and someone knows which rom is the best for the Telus network, I would greatly appreciate it.
Thanks for any help at all guys!
Click to expand...
Click to collapse
When I first got my Telus Diamond it was crap, the interface was slow, tf3d was unreliable, playing mp3's was painful to say the least and the battery life was horrendous. I later flashed to a custom ROM and will never go back. Custom ROMS will improve everything from the performance to the freezing and even improve your battery life. As for which ROM I would suggest. Right now I'm on Juicy 3.2 but I have played around with a number of others including MightyStableRom or MSR, last I tried was 2.2 or 2.3 can't remember. Really it is a personal preference whose ROM you go with. The two I named you can't go wrong with. Once you try it though trust me you will be hooked. I've flashed my Diamond like 20+ times already, so much fun and great improvements. Let us know if you have anymore questions!
Thanks a lot guys!
Could anyone point me to a thread where it tell me how to flash my CDMA diamond step by step?
I'm willing to try anything because i love the phone but hate the freezing and the crappy Batt. life.
Hey majorassface, since your with telus and you have flashed your phone numerous times now, do you know where i can download all the telus stock stuff like the spl, radio rom, & stock rom?
So if for any reason i need to take it back to telus for repairs i can flash it back.
Thanks again!
Hi guys,
I'm quite newbie... I've just moved from SPV c600 to DIAMOND. I've one problem that really makes me mad. At first I must tell that I've tried everything hard reset , than checking if any apps is causing that one by one-with no result. Occasionally I just can't pick up/refuse a calls with HW buttons. I use S2U2(installed yesterday), but this problem I had even before i installed that app. Does anybody of you experienced such an issue? Anybody knows the answer how to fix it? Thanks in advance
Same thing happens to me! It is like HW buttons work whenever they want but not all the time. If you install AEButton Plus you can remap HW buttons, but again the same thing will happen. The changes will work sometimes but not always.
I have a similar problem. Can you answer with soft buttons? Hoping some solution ideas will appear here or in that thread.
Same issue here.
I have added my experience to the above listed thread, and also opened a thread at Howard Forums.
http://www.howardforums.com/showthread.php?p=12088702#post12088702
This has become extremely frustrating.
Sprint has not been very receptive to this either.
what works for me is to lock & unlock the screen.
unless it case is related to another problem which i have experience before as well. But this has gone away since i loaded a different rom from the original htc.
*edit
this should fix it
http://forum.xda-developers.com/showthread.php?t=451647
Hey everyone,
My problems consists of:
- The screen/touch is off. I've done Screen Alignment, it works for a couple hours or so then it just starts to have a mind of its own again
- When I slide the keyboard out, the screen does not rotate, it's just frozen in portrait mode. However, responds to the keys I push on the keyboard, I've tested it by texting someone.
The ROM I was using was a Generic NAM R3A WM6.1 when this problem occured, tried to re-flash with the same ROM, no luck and finally a custom one (Touch X 10.8) and unfortunately, still no luck.
I've never dropped the phone or done any modifications to it. Am I doomed and will have to send the phone in for repairs or is there another way to fix all this?
Thanks
exdout said:
Hey everyone,
My problems consists of:
- The screen/touch is off. I've done Screen Alignment, it works for a couple hours or so then it just starts to have a mind of its own again
- When I slide the keyboard out, the screen does not rotate, it's just frozen in portrait mode. However, responds to the keys I push on the keyboard, I've tested it by texting someone.
The ROM I was using was a Generic NAM R3A WM6.1 when this problem occured, tried to re-flash with the same ROM, no luck and finally a custom one (Touch X 10.8) and unfortunately, still no luck.
I've never dropped the phone or done any modifications to it. Am I doomed and will have to send the phone in for repairs or is there another way to fix all this?
Thanks
Click to expand...
Click to collapse
If I were you, I'd have it back in the shop in no time. But you will need to put back the original rom, otherwise your guarantee will be gone.
Good luck!
Don't forget to revert the SPL since you flashed it to hard SPL.
If You make a new topic then it's pointless to use not at all informative cries for help. It does not say anything about the problem you are having.
The title should say something about the issue so people who know something about notice it and can offer to help and people having the same issue later can find this topic.
Sorry, I'm new to this message board and not really around either.