Hi all,
Friend flashed the S to FW 2.1 ver XWJM2. Stock firmware was I9000XXJF3.
Is there any way to use Kies to restore the factory default FW to JF3 and to also restore the modem and CSC parts too? If not, how is it possible to get all these back to JF3? Does the JF3 package on samsung-firmwares contain the extra files? Other firmwares seem to contain only a phone firmware...
I basically want the phone back to how it was from the factory - is this possible at all without using custom FWs from Samsung-Firmwares?
All firmwares off samsung-firmwares are official ones created by Samsung themselves, and are not modified. The PDA, Phone and CSC tar files are included inside each .rar archive, so if you grab the JF3 fw, it'll have the JF3 phone and CSC tar files too.
Hope this clarifies things for you
OK thanks. As a test I downgraded to JF1 and plugged into Kies. Shows an update is available but the upgrade option is grayed out and it says "The firmware on this device cannot be updated".
I can flash to JF3 if I need to sell it so thats not a problem, but I'm slightly concerned about Kies not working. Does this mean that when 2.2 comes out via Kies it won't update?
No, it probably just means that Kies doesn't recognize JF1 as an "official" firmware and so doesn't attempt to upgrade it. Though if you want to stay on the newest firmwares, you'll want to dump Kies anyway. I'd actually recommend the JM2 firmware, it's the latest Eclair firmware and the most stable (JM5 came out today, but I don't know about it).
Related
Hi All,
I Upgraded my Samsung Galaxy S to Froyo 2.2. All seems well but the performance does not seem all that great as well.
If i want to restore back to the Standard Manufacturer Firmware (i was on JG4) that comes out of the box with the I9000 what do i have to do? Any help here would be appreciated.
Download the firmware from samsung-firmwares and flash your phone with odin. There is plenty of flashing tutorials about to show you how to do it. Although if you managed to update to froyo then you properly already know how to flash it again
Sent from my GT-I9000 using XDA App
Restore
Hello. I managed to get the firmware from samfirmware.com for the original 2.1 (Asian version) but I couldn't get it to follow through. There would always be an error with regards to MD5 or something. What do I do? Thanks
Ren Hayashi said:
Hello. I managed to get the firmware from samfirmware.com for the original 2.1 (Asian version) but I couldn't get it to follow through. There would always be an error with regards to MD5 or something. What do I do? Thanks
Click to expand...
Click to collapse
I have the same problem as well, any helps here please?
Alot of the the DXJG4 firmware out there is corrupted.
So, try download DXJF4 from samfirmware.com (and flash with Odin with 513 pit) then uprade to DXJG4 through KIES.
NOTE: If KIES says "Device version's cannot be upgraded". Then you need to change your product code back to "XSO" (Search the forum on how to change product code.... about editing the nv_data.bin file)
My Flash history:
DXJF4-->DXJG4-->XXJPK-->DXJG4
I'm pretty new....
The firmware versions you guys are talking about are I hope, all "software" version and not real hardware chip revisions?
thanks
why dont you just flash your phone with 2.2.1 or 2.3.3(latest).....i know 2.2 is quite unstable FW but 2.2.1 will help a lots......I dont think you need to downgrade the phone back to the stock FW to solve any problem
Hi there guys.
I can't remember whether my SGS had the JF3 firmware out of the box or not. And, since both JM7 and JM8 are not cutting it for me, I'd like to revert back to my phone's stock firmware. Is there a way to find out what the firmware "out of the box" used to be?
Thanks in advance.
europe = JM2 latest stock
Thank you for your reply.
So JM2 is basically the latest non-beta firmware version?
Also, should I use the "usual" method to flash JM2 and should I get the files at samfirmware?
Please bear with me as I am very new to this flashing stuff.
samfirmware is fast and easy
or you can do it via Kies but it's a challenge dealing with Kies as most people can tell you
AllGamer said:
europe = JM2 latest stock
Click to expand...
Click to collapse
Kies would not update me past JM1. I flashed an old firmware to my phone and as expected Kies prompted me for a firmware update. Only to JM1 though and after JM1 was installed it said my phone was up to date, idk if this is the same for everyone else just letting you know ...
Is it even possible to "downgrade" by using Kies? Cause I can't seem to get it to work, even with all of the registry hacks described in several threads, here on XDA.
Guess I'll have to use Odin after all...
PaulForde said:
Kies would not update me past JM1. I flashed an old firmware to my phone and as expected Kies prompted me for a firmware update. Only to JM1 though and after JM1 was installed it said my phone was up to date, idk if this is the same for everyone else just letting you know ...
Click to expand...
Click to collapse
I have encountered the same in the past. Not sure on which productcode JM2's available.
Anybody know where I can find this firmware?
I9000XFJM5/I9000OXFJM2/I9000XXJM1/I9000XFJM5
I'm planning to Kies upgrade to the UK version of 2.2 Froyo. But I want to have a localized backup for when a official update hits JM5 So I can reflash it with odin.
Also if I upgrade with kies is there any method to revert back to the XFJM5?
samfirmware.com/
i checked samfirmware, couldn't find it
Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk
hello everyone,
I recently purchased my galaxy tab in dubai and could not update through kies as i got the following message "This version of device cannot be updated".
Then i flashed xxjq1 along with bootloaders from this thread http://forum.xda-developers.com/showthread.php?t=1073854 and the gt-p1000_mr_PIT.zip files. now everything works fine but the csc and pda fields are empty.
How can i get the pda and csc fields back. I want to flash the dxjpe firmware as this is the 2.3.3 asian version i found. Will this bring my csc and pda fields back to normal. Will this enable me to update future updates via kies.
Aren't you supposed to boot immediately into recovery after you flash the rom? That installs the csc files. Double check the instructions.
so can i go ahead and flash the dxjpe firmware , will this reinstate my csc files, and what pit file i need to use with this.
hopefully it would fix your problem. as for pit for the dxjpe use (GT-P1000_M.PIT)
I got the error when downgrading and flashing signed bootloaders... Rolling back from GB to froyo gave me that error... I suggest unsigning the bootloader then flashing again...
afaque_h said:
hello everyone,
I recently purchased my galaxy tab in dubai and could not update through kies as i got the following message "This version of device cannot be updated".
Then i flashed xxjq1 along with bootloaders from this thread http://forum.xda-developers.com/showthread.php?t=1073854 and the gt-p1000_mr_PIT.zip files. now everything works fine but the csc and pda fields are empty.
How can i get the pda and csc fields back. I want to flash the dxjpe firmware as this is the 2.3.3 asian version i found. Will this bring my csc and pda fields back to normal. Will this enable me to update future updates via kies.
Click to expand...
Click to collapse
Your post no. 1 is confusing. You said you flashed to JQ1 yet the attachment says JM3. Anyway use this (by noxxious) procedure to get into a ROM without rooting then update thru kies.
The attachment showed the message displayed by kies when i wanted to update my gtab after purchasing. Since i could not officially update using kies i opted for manual flashing
Sent from my GT-I9000 using Tapatalk
afaque_h said:
The attachment showed the message displayed by kies when i wanted to update my gtab after purchasing. Since i could not officially update using kies i opted for manual flashing
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Just follow the link above to downgrade to JK2 which is a version with unsigned bootloader. Then update thru kies. Kies should be able to detect your firmware as upgradable to JPE.
Good luck!
This happened with me after a soft brick. Reboot into recovery and see if CSC is installed, if not do a factory reset. For me flashing a stock firmware fixed it for me.
DarkPal said:
This happened with me after a soft brick. Reboot into recovery and see if CSC is installed, if not do a factory reset. For me flashing a stock firmware fixed it for me.
Click to expand...
Click to collapse
Right, I reminded him a while ago after flashing to immediately go into recovery to get the csc files installed. The JQ1thread has clear instructions.
Don't worry about that other rom yet - by correctly flashing JQ1 you will have the complete system and safe bootloaders. Once that's done, you can go in any direction.