Database Develop

Freeze at G1 Splash SCreen, I Need Help!!

Edit: ****, ok so my phone isn't booting up now..the phone just freezes at the g1 splash logo.
I can still get into recovery console/bootloader, can I save my phone? Help!
I do have other theme's in /sdcard/themes/
I don't know if I can delete the current update.zip in my root and move one of them to the root and rename it, then flash that on? Someone please help!
-Ok so, I have the sdk...
-I'm in fastboot mode
-I have the correct driver for the phone, windows picks it up
but when adb doesn't pick up the devices, is there something I need to do to "get started" so to say? I'm trying to install some themes and push the browser.apk into the phone but, im stumped

tehseano said:
Edit: ****, ok so my phone isn't booting up now..the phone just freezes at the g1 splash logo.
I can still get into recovery console/bootloader, can I save my phone? Help!
I do have other theme's in /sdcard/themes/
I don't know if I can delete the current update.zip in my root and move one of them to the root and rename it, then flash that on? Someone please help!
-Ok so, I have the sdk...
-I'm in fastboot mode
-I have the correct driver for the phone, windows picks it up
but when adb doesn't pick up the devices, is there something I need to do to "get started" so to say? I'm trying to install some themes and push the browser.apk into the phone but, im stumped
Click to expand...
Click to collapse
First, you are at the wrong screen. You should not be in fastboot mode in the bootloader for updating themes, you should be in recovery mode.
I suggest you perform a wipe to possibly bring your phone back to normal at least. It can be done by turning off the phone, then pressing and holding the back and home button until you enter recovery mode.
From there press alt + w to wipe the phone.
Then restart by pressing back + home.
Next, before installing the theme, make sure its the correct one for your phone. Check with the author if it was made for RC30 or RC8, and if it is a non-wipe theme, because if it is not, you will be stuck at the Tmobile G1 splash screen (aka be in an indefinite loop) like your current situation.
If you are trying to install browser.apk (im assuming the multitouch browser - please correct me if im wrong) you will need to install JF 1.41 first. By default it will include the multitouch version of browser.apk
Please provide more information about your situation, and keep us posted.

andonnguyen said:
First, you are at the wrong screen. You should not be in fastboot mode in the bootloader for updating themes, you should be in recovery mode.
I suggest you perform a wipe to possibly bring your phone back to normal at least. It can be done by turning off the phone, then pressing and holding the back and home button until you enter recovery mode.
From there press alt + w to wipe the phone.
Then restart by pressing back + home.
Next, before installing the theme, make sure its the correct one for your phone. Check with the author if it was made for RC30 or RC8, and if it is a non-wipe theme, because if it is not, you will be stuck at the Tmobile G1 splash screen (aka be in an indefinite loop) like your current situation.
If you are trying to install browser.apk (im assuming the multitouch browser - please correct me if im wrong) you will need to install JF 1.41 first. By default it will include the multitouch version of browser.apk
Please provide more information about your situation, and keep us posted.
Click to expand...
Click to collapse
Sorry, I should have provided more information, and explained that the 2nd half of this post was my original post, which was just me asking how to correctly use ADB. I do already have JF 1.41, I upgraded yesterday. It wasn't my first theme I installed either. I was using Vintage War (for the Dream), but it hadn't been updated for 1.41, so I was trying the standalone apk adb push method found in this forum, which is where this post first oriented.
I was in recovery mode for installing themes, I'm using JF 1.41 RC30, with the HardSPL bootloader. Initially after installing the theme it would go blank after the g1 splash, so I had tried to install it again hoping it would fix it, unfortunately my thumb is a bit to fat and I hit alt W instead of S, anyways that is what put me into this infinite loop.
But like I said this wasn't my first time trying to mod the phone, I've had it rooted for a month or so now, and have been keeping up-to-date.
Any more information I can provide, please let me know. My phone is my livelyhood, I need it. So if anyone can help, the sooner would be better. Either way I am entirely greatful for any help anyone can provide. Thanks in advance!

tehseano said:
I was in recovery mode for installing themes, I'm using JF 1.41 RC30, with the HardSPL bootloader. Initially after installing the theme it would go blank after the g1 splash, so I had tried to install it again hoping it would fix it, unfortunately my thumb is a bit to fat and I hit alt W instead of S, anyways that is what put me into this infinite loop.
Click to expand...
Click to collapse
It is weird how a wipe caused you to go into an infinite loop. Which apk's did you try to push to your phone?
I would suggest to go without using the theme for now. JesusFreke had pointed out that some themes were causing problems for the new 1.41. update. You should check with the author of the theme to see if its compatible with the new 1.41 (which it should be since RC30 1.3, RC30 1.31, and RC30 1.41 are all compatible)

andonnguyen said:
It is weird how a wipe caused you to go into an infinite loop. Which apk's did you try to push to your phone?
I would suggest to go without using the theme for now. JesusFreke had pointed out that some themes were causing problems for the new 1.41. update. You should check with the author of the theme to see if its compatible with the new 1.41 (which it should be since RC30 1.3, RC30 1.31, and RC30 1.41 are all compatible)
Click to expand...
Click to collapse
....How do I get out of the loop. My phone doesn't get passed it. There has to be something I can do in console or recovery or something. I'm really sorry if I'm coming off as rude or demanding but I really need a phone, and I need it right now. I don't know what more I can tell you before someone can finally give me a solution (sorry)

1. Download RC29
2. Copy it onto your sdcard
3. Reboot your phone into the SPL with Power+Camera
4. When prompted, press the end key to start the reflash.
Note: this will completely wipe the flash chip on your phone and revert everything back to factory. You will need to re-root your phone and update to JF1.41
Next time, use nandroid to backup before installing themes, etc.

Datruesurfer said:
1. Download RC29
2. Copy it onto your sdcard
3. Reboot your phone into the SPL with Power+Camera
4. When prompted, press the end key to start the reflash.
Note: this will completely wipe the flash chip on your phone and revert everything back to factory. You will need to re-root your phone and update to JF1.41
Next time, use nandroid to backup before installing themes, etc.
Click to expand...
Click to collapse
Alright, I'm doing it now. And I did use nandroid and make a backup, no one said anything about how to restore it. Regardless thank you so very much, you are my Savior right now!

tehseano said:
Alright, I'm doing it now. And I did use nandroid and make a backup, no one said anything about how to restore it.
Click to expand...
Click to collapse
That's easy. Just grab a copy of the fastboot utility and the images off your sdcard in the 'nandroid' directory and boot your phone into the SPL. Plug your phone in via usb and press the back button once and you should see "Serial0" change to "FASTBOOT" Then open up a windows command prompt in the location of the exe you downloaded and run:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata data.img
fastboot reboot
Your phone will come back up with all of your applications, settings etc from when you did the backup. Keep in mind you need the HardSPL to do this though(look for three androids on skateboards in SPL). The G1 factory bootloader does not support fastboot, only NBH images that come from the factory.

Hi, my situation is a bit worse:
I have a Dev Phone, upgraded to JFv1.41.
Today, I got the pop up message telling me to do a "system holiday update 2 of 2". I press "Update now" and the phone got reboot. Since then... I could not get through the first screen that has the word "Android" at all, not even to the screen where Android icon is flashing. It just freezes right there.
The only way to turn off is to take out battery. I could not enter recovery mode through pressing Home+Power. One time, the screen actually turned into weird color patterns. Is there anything I can do? consider that I don't have any nandroid back up image at all?
I tried to download the DREAIMG-RC29.zip, unzip and copy to the sdcard, then reboot into the SPL with Power+Camera but nothing happens, just a 4 color screen said "serial0".
Thanks in advance.

Isn't the 4 color screen the standard bootloader that ships with retail G1's (not a dev phone bootloader)?

lugiamx said:
Hi, my situation is a bit worse:
I have a Dev Phone, upgraded to JFv1.41.
Today, I got the pop up message telling me to do a "system holiday update 2 of 2". I press "Update now" and the phone got reboot. Since then... I could not get through the first screen that has the word "Android" at all, not even to the screen where Android icon is flashing. It just freezes right there.
The only way to turn off is to take out battery. I could not enter recovery mode through pressing Home+Power. One time, the screen actually turned into weird color patterns. Is there anything I can do? consider that I don't have any nandroid back up image at all?
I tried to download the DREAIMG-RC29.zip, unzip and copy to the sdcard, then reboot into the SPL with Power+Camera but nothing happens, just a 4 color screen said "serial0".
Thanks in advance.
Click to expand...
Click to collapse
I had the same problem, almost verbatim. ADP1.1, JFv1.41, ran the Holiday update 1 of 2, no problems, did the 2 of 2 update, got stuck at the flashing Android boot screen. Pulled the battery, rebooted, same thing, waited 2-3 minutes at the flashing screen and was just about to pull the battery again and then all of a sudden the damn thing came to life, the OS loaded up and now everything's working fine. Gave me quite a scare.

ummm actually the fastboot utility wont work for my computer soo what shoud i do.... if anything i need a really good reply something long cause im new to this and my fone wont get off the android sign.

chinoman said:
ummm actually the fastboot utility wont work for my computer soo what shoud i do.... if anything i need a really good reply something long cause im new to this and my fone wont get off the android sign.
Click to expand...
Click to collapse
Why have you just hijacked a 5 month old thread? You haven't given use any details either. Fastboot is available for all OS's, it will work on your computer, you just probably don't know how to use it. Please make a new thread in the Q&A section where we can help you out there.

This should be closed or moved to Q&A.

hey man just unroot ur phone and root it again u soft bricked ur phone its ok

hey just try to unroot k

hey if u want me to fix it for u just email me at [email protected] and ill help u

Help with root, cant get into recovery image!

okay I followed regs guide and when I reached the part to where I have to run the command to flash the custom recovery image
regaw says it may take many seconds for it to complete
when I do it it takes less than 1 second and when I run the final command to reboot the phone into the recovery menu it simply boots up normal
I have tried booting while holding the home button and still a no go
I think the recovery image isnt flashing into my phone for some reason...
but cmd says it was successful , any help apreciated

can anyone help?
please, I've followed everything as it should be.
I've tried 3 computers(2 running XP , 1 running windows 7)
I've Hard reset the phone everytime I have tried to perform the root
Everytime I flash the recovery img it says its successful but when I place the comand to reboot into recovery my phone freezes and I have to do a battery pull.
I don't get what I'm doing wrong
I have all the files in the correct directory
I have usb debug on
I have set the phone to charge only
I have htc sync installed
any help apreciated :/

just mount your sdcard copy the recovery to it again then try to flash it once more. it could have corrupted the image on the first copy. if that doesnt work. try to download the 1.6.2. recovery image and flash that.

nfinitefx45 said:
just mount your sdcard copy the recovery to it again then try to flash it once more. it could have corrupted the image on the first copy. if that doesnt work. try to download the 1.6.2. recovery image and flash that.
Click to expand...
Click to collapse
can you point me to where I can find that download?
Thanks I will try to mount the card now

No luck putting the files directly into the card ; ;
what else should I try?

I'm having the same issues. I'm running a brand new hero not even activated yet that has 1.5 (sprint send me new one bc couldnt revert.. didnt know root was coming) ANYWAY I need help.
I have root and I've copied damage controls zip to my sd card. I tried rebooting into recovery mode and i get an error picture so I had to reboot.
this is frustrating.. can someone give me step by step including commands that I should type? I can load the sprint 2.1 and unlock (have old version) but right now im as frustrated as all the other noob's.
it sounds so easy but im clearly doing something wrong..

gab2012 said:
No luck putting the files directly into the card ; ;
what else should I try?
Click to expand...
Click to collapse
1.5.2 http://www.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-heroc-v1.5.2.img
1.6.2 http://rapidshare.com/files/360288584/recovery-RA-heroc-v1.6.2.img

it worked with 1.6.2 thank you!

no problem

sporty9xterra said:
I'm having the same issues. I'm running a brand new hero not even activated yet that has 1.5 (sprint send me new one bc couldnt revert.. didnt know root was coming) ANYWAY I need help.
I have root and I've copied damage controls zip to my sd card. I tried rebooting into recovery mode and i get an error picture so I had to reboot.
this is frustrating.. can someone give me step by step including commands that I should type? I can load the sprint 2.1 and unlock (have old version) but right now im as frustrated as all the other noob's.
it sounds so easy but im clearly doing something wrong..
Click to expand...
Click to collapse
this is the walk thru you should do with 1.5 just used the 1.6.2 Recovery I posted, it has less issues with flashing
http://forum.xda-developers.com/showpost.php?p=4930043&postcount=1

[GUIDE] [01/05/2011] Root your Incredible (AMOLED & SLCD Support!) + FAQ

Updated 01/05/2011
Support for both AMOLED & SLCD owners!
With the release of Unrevoked 3.31, DINC owners are now able to obtain root and S-OFF with the Nov OTA and it also supports recoveries for both AMOLED and SLCD users!
I have put together an extensive guide on how to get root for both AMOLED & SLCD users! Rooting is now even easier than ever.
The guide is available at http://jonsuh.com/2010/11/root-your-droid-incredible-how-to/
FAQ
Blank Recovery Screen Issue
For those of you coming across the issue of the blank/black recovery screen:
Do NOT boot straight into recovery with Volume Up+Power.
Boot into HBOOT FIRST with Volume Down+Power.
Then select RECOVERY from the HBOOT menu.
I rooted before the OTA and the OTA will not install
Read my article on how to Unroot your Droid Incredible at http://jonsuh.com/2011/01/unroot-your-droid-incredible/
Then read my article on how to root.

link doesnt work

I apologize; link is fixed and should be working now.

Looking to try this, but my SD card appears to be formatted to FAT16. How do I format it to FAT32?
Edit: Spoke too soon, got it. I'll post an update when once I'm done.

works perfectly took about 45 minutes
Sent from my ADR6300 using XDA App

papi92 said:
works perfectly took about 45 minutes
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
It is more time consuming but it does work! Glad to know u were able to get it to work. I think it was worth it. So much better having root back
Sent from my ADR6300 using XDA App

I'm already S-Off and rooted, running (mostly) stock. I skipped to step 5B, to update to the OTA update. However, when I attempt to apply update.zip, it fails during the "Verifying current system" step. The text is below:
assert failed: apply.patch.check("/system/app/Mail.apk", <insert two long non-matching hash values here>)
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Anyone run into this or have a clue?
Thanks.

danman7 said:
I'm already S-Off and rooted, running (mostly) stock. I skipped to step 5B, to update to the OTA update. However, when I attempt to apply update.zip, it fails during the "Verifying current system" step. The text is below:
assert failed: apply.patch.check("/system/app/Mail.apk", <insert two long non-matching hash values here>)
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Anyone run into this or have a clue?
Thanks.
Click to expand...
Click to collapse
Well truthfully, the OTA update doesn't do much but add more crapware. There isn't any other reports of the OTA being a significant update so you'd be safe to not even install the OTA. If you're annoyed with the reminder, if you've done all I've told you to, if you click "Install" it should just time out and not do anything and never remind you again.

Not Working For Me
This process does not appear to be working for me.
After doing all up to and including the "ADB" stuff and typing "reboot bootloader", my phone just boots to the bootloader and does nothing. I never get the prompt to process the update.
Where did I go wrong? I've tried this four times with the same results.

ozone777 said:
This process does not appear to be working for me.
After doing all up to and including the "ADB" stuff and typing "reboot bootloader", my phone just boots to the bootloader and does nothing. I never get the prompt to process the update.
Where did I go wrong? I've tried this four times with the same results.
Click to expand...
Click to collapse
Did you make sure you didn't rename the file something different? It should be "PB31IMG.zip" in the root of your SDCARD.
Also did you make sure your SDCARD was formatted to FAT32? and not FAT/FAT16?

UNREVOKED 3.22 HAS BEEN RELEASED.
Get your copy at www.unrevoked.com.
This thread will be changed within the next 24 hours to accommodate the new Unrevoked. No longer need to downgrade to root.

jsuh said:
Did you make sure you didn't rename the file something different? It should be "PB31IMG.zip" in the root of your SDCARD.
Also did you make sure your SDCARD was formatted to FAT32? and not FAT/FAT16?
Click to expand...
Click to collapse
No good.
I am running Windows 7 64-bit.
I formatted the removable sdcard to fat32 and the PB31IMG.zip file is named correctly.
I type in "./flash_image misc /sdcard/mtd0.img" and immediately get the "#" prompt after it confirms my entry.
I then type "reboot bootloader" and the phone goes to the bootloader and just sits there until I tell it to reboot.
Should I be doing all of this from the internal storage instead of the removable card?
New Info:
I just tried it again and this time instead of rebooting from the bootloader screen I selected "bootloader" and it checked the image and gave me the option to flash. I said "yes" and it is now loading the image.

ozone777 said:
No good.
I am running Windows 7 64-bit.
I formatted the removable sdcard to fat32 and the PB31IMG.zip file is named correctly.
I type in "./flash_image misc /sdcard/mtd0.img" and immediately get the "#" prompt after it confirms my entry.
I then type "reboot bootloader" and the phone goes to the bootloader and just sits there until I tell it to reboot.
Should I be doing all of this from the internal storage instead of the removable card?
Click to expand...
Click to collapse
Nope, you shouldn't, but no worries, the new Unrevoked version should be able to get you root without having to follow all my directions.
Just go to www.unrevoked.com/recovery then download and run the proper version.

Uh-Oh!
I think I just bricked the phone.
After saying yes to flashing the image, the phone went black and never woke up. now I can't turn it on although the soft buttons light up when I press the power button.
Is there any key combination that will get me to recovery or am I screwed?

Updated 12/2/2010
With the release of Unrevoked 3.22, I provided instructions for root for BOTH AMOLED & SLCD owners!
Enjoy
http://jonsuh.com/2010/11/root-your-droid-incredible-how-to

ozone777 said:
I think I just bricked the phone.
After saying yes to flashing the image, the phone went black and never woke up. now I can't turn it on although the soft buttons light up when I press the power button.
Is there any key combination that will get me to recovery or am I screwed?
Click to expand...
Click to collapse
Is there any way to get the phone back?

ozone777 said:
Is there any way to get the phone back?
Click to expand...
Click to collapse
You can try to hold volume down and the power button to get back into hboot. That may get you back to a workable position.
Hope that help...

g00gl3 said:
You can try to hold volume down and the power button to get back into hboot. That may get you back to a workable position.
Hope that help...
Click to expand...
Click to collapse
Already tried all the standard key combos with no success.
I thinks its time to stick a fork in it.
Time of death...3PM.
This doesn't mean I won't try again with the replacement Verizon sends out to me.
Gotta get back on the horse.

ozone777 said:
Already tried all the standard key combos with no success.
I thinks its time to stick a fork in it.
Time of death...3PM.
This doesn't mean I won't try again with the replacement Verizon sends out to me.
Gotta get back on the horse.
Click to expand...
Click to collapse
Pull the battery out put it back in and turn it back on (u said that it was an slcd?). U mentioned that the soft keys turn on right? Have u tried re running unrevoked with the new recovery mod for slcds? Look at my site for directions.
It may b that unrevoked would still recognize ur phone being plugged in and rerun the root process with the proper recovery.
Sent from my ADR6300 using XDA App

The 3.22 works great. The one thing I kept getting hung up on was after I installed the drivers by going into device manager etc etc was that windows was still asking me to install hardward drivers for usb device... so I followed along with windows and installed the driver again. Immediately after I installed the drivers for the second time unrevoked picked up my phone and started the process. It went all the way through and went to "done." (forgot to remove the PB31IMG.zip from trying to push the downgrade before - so it tried loading the update and failed...all I had to do was choose dont reboot, that brought me back to the hboot screen then unrevoked picked it back up).
The one problem I kept running into was that the new 3.22 unrevoked wouldnt pick my phone up even after I installed the drivers with device manager etc. So I tried a few different computers...still nothing and still asking me a second time to install the drivers. After I installed the drivers the second time everything was smooth from there.

Can someone help me get back into recovery?

Hi
I have been using Clockwork recovery for months and tonight was flashing ROM/zips as usual, and all of a sudden when I try to get into recovery my Nexus just sits on the colored X. When I pull the battery it reboots fine with the ROM I currently have installed. Then I go back into ROM manager, re-flash clockwork recovery: it says flash was successful, so then I choose to boot into recovery, and again it just sits at the blue, red, green and yellow X.
So then I tried a round-about way by going into ROM manager and choosing to restore a backup. Again, when I choose to restore backup it just boots to the colored X again and freezes there.
I've also tried the regular method of holding power button and trackball and get the same results.
Does anyone know why this might be happening? Right now I'm stuck with a ROM I was just playing with and didn't necessarily want to use permanently....I'm afraid I might be stuck with it forever now
Thanks for any help!!!

I've been searching and I should add that my bootloader is not unlocked

Try to flash your recovery manually, using the guide from my signature. Try Amon_RA's.

Jack_R1 said:
Try to flash your recovery manually, using the guide from my signature. Try Amon_RA's.
Click to expand...
Click to collapse
Well I ended up wiping all user data in fastboot and now I get nothing but an X nomatter what I do, won't boot at all.
All I can do is hold down the power button and trackball and get the page that says
bootloader
reboot
reboot bootloader
power down
the only way I'm going to get this fixed is to use my computer and I've never done it that way...I've always used ROM manager
I'll read the links but I think I'm screwed because a lot of this is over my head
Thanks for the links !

1) Try to follow "Unroot/restore" guide first, see if you can restore functionality using PASSIMG method. Once you have functional FRG33 with recovery, you can root it, replace the recovery and install custom ROM of your choice / update to FRG83G.
2) If nothing helps - consider a) replacing your phone, b) unlocking the bootloader and flashing recovery through fastboot.
Getting in over your head is sometimes a good way to expand your horizons

Hi Jack
Thanks for the help
I'll do some reading and see what I can do....got two feet of snow here so I guess I have the time
worst comes to worst I'm still under warranty.

Well I tried the instructions but nothing happens..it just sits on the screen with the androids skateboarding. I renamed the zip and moved it to my SD card but it doesn't seem to even search for it, let alone find it. Really wish I had not deleted storage. At least I had a working ROM at that point.

Which instructions did you try? Did you download FRG33, rename it to PASSIMG.ZIP (and not PASSIMG.ZIP.ZIP !), put it on the root of SD card and reboot to bootloader?

Jack_R1 said:
Which instructions did you try? Did you download FRG33, rename it to PASSIMG.ZIP (and not PASSIMG.ZIP.ZIP !), put it on the root of SD card and reboot to bootloader?
Click to expand...
Click to collapse
Hey Jack...
Sorry for taking so long to respond...I finally had to crash for awhile, my brain was frying.
Yes I did what you describe: downloaded FRG33, renamed it PASSIMG.ZIP(not ZIP.ZIP) moved it to SD card just like any ROM and held down volume and power button and came to the screen with the three androids. Then it just stayed there, nothing happened.
The only thing is I had to use my backup Nexus One(EDGE only on ATT model) to move it to the SD card as I don't know how to access the SD card with the device acting like this. If I connect the device to my computer while the three androids are on the screen, I hear it connect to the computer, but nothing pops up allowing me to access the SD card....
Like I said I'm a noob at this I appreciate you trying to help me here

About 3 seconds after the 3 androids skating appears, you should see some text flash up?
It does say you're in HBOOT and not FASTBOOT right? If in fastboot, pick the bootloader option and then it should find the file.

Rusty! said:
About 3 seconds after the 3 androids skating appears, you should see some text flash up?
It does say you're in HBOOT and not FASTBOOT right? If in fastboot, pick the bootloader option and then it should find the file.
Click to expand...
Click to collapse
Hi Rusty
Sorry I somehow missed your post here. Yes I see some text flash up...takes a little longer than 3 seconds...maybe 8 seconds...
At first it says I'm in Fastboot, but then I press the power button and then it says HBOOT at the top.....that's when the text flashes on the screen. It flashes too fast for me to read it though....but nothing happens after the text flashes on the screen.

I'll be damned guys....I got it working! After responding to Rusty's post above, I decided to give the whole thing another try. Well I went thru the whole process of putting the file on the SD card and realized I had in fact renamed it zip.zip....it LOOKED like it was only ZIP, but when I clicked on the file while it was still on my PC, it said it was zip.zip...that's when I knew what the problem was.
My problem now is getting it re-rooted. Originally I used the Universal Androot application..the true one-click method...I just tried it again and it didn't work.
Is there a way to downgrade to a version where this app will work again?
Thanks guys you really helped me out here!!

Please read the guide in Wiki, and follow one of the zillion SuperOneClick threads that are around. It's really as simple as it gets - and if you happen to have Windows 7, it's even more simple - you won't need to install the drivers.

Jack_R1 said:
Please read the guide in Wiki, and follow one of the zillion SuperOneClick threads that are around. It's really as simple as it gets - and if you happen to have Windows 7, it's even more simple - you won't need to install the drivers.
Click to expand...
Click to collapse
Yup I'm already rooted!!! Thanks man!!!! Took 12 minutes!!

Okay I'm having another issue: SuperOneClick said I was rooted,I have the superuser icon in my app drawer, but ROM manager will not flash Clockwork mod recovery and Titanium Backup says I do not have root rights??

well I rebooted and now have root rights but am still getting an error when I try and flash clockwork mod: it says: "an error occurred while flashing your recovery"

Do you have Busybox installed?

Jack_R1 said:
Do you have Busybox installed?
Click to expand...
Click to collapse
You're going to think I'm a dip**** but I don't even know what busybox is?

Let's just say it's an app that the system needs Go to Market, download and install it, try again. If it doesn't work - you can try to install custom recovery manually, using another guide from Wiki. Look in "Installing Recovery" for "For locked bootloader - flash_image using Terminal" guide. If you don't know what Terminal is - download "Android Terminal" by Jack Palevich from the Market.

Use the fix problems button in Titanium Backup to install it, long story short is it lets you use a bunch of native Linux commands that as missing from Android.

Stuck at logo after CWM & Promethius

I installed CWM recovery from within ROM Manager, rebooted into recovery, made a backup of my stock rooted ROM, then tried to install Promethius Thrill Edition from here:
http://forum.xda-developers.com/showthread.php?t=1960787
It failed, giving me an error status (0), i tried to reboot the device, and it sits at the LG logo and does not move... I tried to restore my stock rom, and when it reboots, it does the same thing....
Someone PLEASE help me asap... I run my own business and without my phone I cannot make money....

cyb3runkn0wn said:
I installed CWM recovery from within ROM Manager, rebooted into recovery, made a backup of my stock rooted ROM, then tried to install Promethius Thrill Edition from here:
http://forum.xda-developers.com/showthread.php?t=1960787
It failed, giving me an error status (0), i tried to reboot the device, and it sits at the LG logo and does not move... I tried to restore my stock rom, and when it reboots, it does the same thing....
Someone PLEASE help me asap... I run my own business and without my phone I cannot make money....
Click to expand...
Click to collapse
I have also tried to do a data/factory reset, wipe cache, dalvik cache, etc. Still no luck...

Ok so here is what i did step by step... I rooted the phone using:
http://forum.xda-developers.com/showthread.php?t=1412490
After I rooted it, I tried installing CWR using:
http://forum.xda-developers.com/showthread.php?t=1365876
This did not work for some reason, so i installed ROM Manager from the play store and let it install CWR
I downloaded this to my external SD:
http://forum.xda-developers.com/showthread.php?t=1960787
I rebooted into CWR and chose to install zip from SD, chose my external SD, and chose Promethius Rom.. It went throught it's thing, then told me it failed, probably a bad download on my part due to crappy network at the time...
I then said screw it and rebooted the system and was going to just stay with stock, but now it's stuck at the LG screen. I've tried factory reset, wipe cache/dalvik cache, etc. and so far nothings working. I am now going to attempt to re-download Promethius Rom and put it on my SD card and try to install it with a better/new download. I will report back if no one has any other ideas for me to try.....

Just tried a new download of Promethius Rom and it did not work. Going to download a different Rom to try i guess... I have no other ideas and so far no help..

Ok I have tried NUMEROUS things now. I know I am going to need to use this LG Flash Tool some how, but it's been a huge fight trying to get it to work... I hold volume up, plug in the usb, and in device manager it keeps just coming up with "Unknown device" So I unplug it and try again while holding volume up... Same thing.. Every once in a blue moon it'll pop up with something else, but almost never lasts more than a split second. IDK wtf to do, and I desperately need my phone.....

http://forum.xda-developers.com/showthread.php?t=2195753

drastic00 said:
http://forum.xda-developers.com/showthread.php?t=2195753
Click to expand...
Click to collapse
I tried following this early this morning before work but kept running into problems when it came time to connect the phone, install the OP driver, etc. I am going to try again very shortly. I'll let you know how it goes.

It is fiddly to install the drivers but once it is done, it is done...

drastic00 said:
It is fiddly to install the drivers but once it is done, it is done...
Click to expand...
Click to collapse
I got to the point where it goes through the flasher but it goes through alot of stuff but then fails. I'll give you my exact process...
Installed the OMAP Flash Installer
Installed LG Mobile United Drivers
Installed and setup the Flash Installer v1.1
Opened device manager, held the volume up button on phone (with battery, SIM, and SD removed) and inserted SYNC cable into phone
Caught the OMAP device in device manager, and installed omap_winusb.inf
Changed com port to port 41 on the LGE Mobile USB Serial Port
Setup FlashTool with the LGP920_110622.dll and 28bRTbig_AP.bin
Hit start on the flash tool. Plugged in the SYNC cable, and inserted the battery in the phone, waited for flash tool to start.
Here is what flash tool shows...
NO READ PID
RomBinary Download Start
28brtbig_cp.fls
PSI RAM writing start
Trying to communicate with IFX modem
Confirm IFX communication
PSI RAM writing end
Start PSI RAM
EBL writing start
Start EBL error!
Error WM_PROGRESS_MSG
Error WM_PROGRESS_MSG
FAIL
At this point, i have no clue what else to do....

When trying to flash, do you see "S/W" on the phone screen with Korean writing?

If not you may need this guide
http://forum.xda-developers.com/showthread.php?t=2246001
Karim is active there, so hopefully you can get answers.

drastic00 said:
If not you may need this guide
http://forum.xda-developers.com/showthread.php?t=2246001
Karim is active there, so hopefully you can get answers.
Click to expand...
Click to collapse
Nope screen was completely blank so I will follow this guide right now.

drastic00 said:
If not you may need this guide
http://forum.xda-developers.com/showthread.php?t=2246001
Karim is active there, so hopefully you can get answers.
Click to expand...
Click to collapse
Thank you so much, still failing but it's yet another step towards fixing it... Hopefully I can get this resolved TONIGHT as i've lost around $4,000 due to me being unable to get my calls.