I bought a tilt from the US two years ago. I am in Romania now and My screen broke. I bought a tytn II replacement screen, replaced it in a cellphone repair shop and when I got it back the touchscreen doesn't work. I tried reinstalling a the original HTC rom and att tilt stock rom but no luck. What can I do.
The serial numbers on the screens do not match. Is it supposed to be this way? I need help fast because I want to leave this phone with my fioncee so I can talk to her on skype with it.
Related
Have just got a new contrcat with three and have sold the phone i have got with them.
I am getting a diamond from ebay, but wanted to know what network i should get it from. Is there any benifits of getting a orange diqamond over a tmobile.
What are the diferences?
I dont really want the o2 with the flast back and i would rather not have any branding on the phone.
Aditionally i will need to unlock it, are any easier to unlock than the others?
I found some info on how to set up the internet setting for the other htc devices for three UK and someone said it worked on theor diamond. Hopefully this should work. But if anyone has a diamond on three uk and has any advice on setting up. PLease let me know
I am having trouble with my tlit for the last 2 weeks as it is not recognizing my sim card I have cleaned the sim, hard/soft reset, other sim cards, send to htc, tried differnet radios and still with the same problem, I am getting very angry as this is my 2nd htc device which gone bad and this time do not have money to buy another pda this one still under warranty is there something else I can do before I throw this pda out of the window :!!!
please Help !!!!
Take it into a nearby store and have them try a new sim in or if anyboydy in you family has ATT, use theirs and see if the problem still persists.
Time to use the warranty again
Deo said:
this time do not have money to buy another pda this one still under warranty is there something else I can do before I throw this pda out of the window :!!!
Click to expand...
Click to collapse
Yes send it back to HTCs repair centre under warranty and tell them the problem either wasn't fixed properly the first time or has reocurred. You also need to ensure your network provider has provided you with the correct sim for a Kaiser (although you say it's a Tilt which is AT&T your icon shows vodafone so for them it'll be the same sim as for their V1615).
I got the same error today... but it works again now.
I dont realy know what append.
First I tried it in another phone Ok on that phone, not on the HTC TyTN2
second I tried on HTC P3600 it is ok,
Third retry on the HTC Tytn2 it worked well.!!!
The Htc Tytn2 is under WM6.1 (upgraded from WM 6.0)
When the issue occured, during the boot, I got the message to start in safe mode may be there was somthing wrong with one driver.
when I got it running with the sim the HTC didn't ask any more to start in safe mode... let you investigate.... good luck
Flying Kiwi said:
Yes send it back to HTCs repair centre under warranty and tell them the problem either wasn't fixed properly the first time or has reocurred. You also need to ensure your network provider has provided you with the correct sim for a Kaiser (although you say it's a Tilt which is AT&T your icon shows vodafone so for them it'll be the same sim as for their V1615).
Click to expand...
Click to collapse
I Have already send it last week and returned with not even a description what is the problem . I have tried differnet operator sim card and still no luck so have to phone them again which means 30 min on the phone !!! how can I get a new phone under warranty from htc ?
I phoned htc europe and now told me that because my htc is branded at&t I have to get to at&t funnily enough when I contact at&t last week they told me to return it to Htc
updates
So i recontact at&t now and sad that because I do not have an At&t line I cannot return the phone to be excahnge for a new one and my tilt is still under warranty!
Any ideas what I can do ?
What do you have there (precisely)?
Deo said:
updates
So i recontact at&t now and sad that because I do not have an At&t line I cannot return the phone to be excahnge for a new one and my tilt is still under warranty!
Any ideas what I can do ?
Click to expand...
Click to collapse
I'm confused as to what you actually have there is it
A) A Tilt (ie the US Version of a Kaiser with bloatware but no VGA Camera) which is used on AT&Ts network
B) A 'genric' ie HTC branded TyTN II
C) A Tilt but you've never activated it and instead unlocked it/modified it to use a Vodafone sim on it or
D) None of the above (in which case what is your arrangement)?
Anyone who has a Tilt but unlocks it to use another providers sim in it (without getting the unlock code from AT&T to do it officially - or putting it back to stock condition before reporting a problem) will probably run into warranty problems I'd imagine - I hope this isn't you
it is a at&t from usa. For unlocking sim as many others did when they need to replace their mobile was to put in back original software so should not be a problem. What if i get at&t sim card and number will at&t consider me as their client a replace my tilt under warranty !
This happened to me! I was taking a nap and I woke up wondering why I hadn't received a call, and there was the emergency call only screen. I turned off my phone and then took the SIM card out, put it back in, and booted it up. It did the same thing, but I turned it off and turned it back on and it was fine. I hope it doesn't happen anymore, I was scared. Good luck getting yours back! That's the only problem I've had with my Tilt, minus the not having 3G or Edge service where I go to college.. even though it's on the highest hill in town. and I'm supposed to have service. hmm.
OK guys, here’s the deal… I have a big problem with my MDA Compact IV (T-mobile’s version of the HTC Diamond). As it is a simlock free device, I’m using my Vodafone sim card. I hope one of you experts can help! I’ve been through just about the entire internet and this forum and found that there are more people with the same problem, but I haven’t found a working solution yet.
What happened:
- I got my MDA, didn’t like the T-mobile branding so before even using the phone with the original software, I’ve upgraded to SPL-1.40.OliNex, Radio 1.00.25.05 and the original HTC Touch Diamond 1.93.404.1 Dutch Stock ROM.
- I also installed a few programs like Klaxon, Tomtom 7 and S2U2.
- After a few hours of playing with my device I noticed that there were some problems with the sound. When I receive a call there is no sound, when I answer the call the caller can’t hear me and I can’t hear him. Same problem when I make a call myself. None of the systems sounds work. This can only be solved after soft reset.
- These sound problems occur completely random. Sometimes it works for hours and sometimes just minutes after the reset.
What I’ve done to try to solve the problem:
- I de-installed all the programs, but did not fix the problem.
- I went over all the sound settings, but did not find anything wrong.
- I did a hard reset, but this didn’t solve anything.
- I returned to the original t-mobile stock ROM. This also wasn’t the solution.
I’m getting quite desperate here. I love the phone, it’s looks and possibilities, but it’s a real problem if you can’t even use it to make and receive calls. I still see that as a basic function when you buy a phone
EDIT: OK guys, finally after nine weeks of waiting, calling and emailing the repair center, I got my device back and what do you think....? Problem fixed! It turned out to be a hardware problem. I don't know exactly what they did, but my phone works just fine now. I reflashed to the AZTOR NLD ROM and now I'm the proud owner of a working phone! Big thanks for all of your support!
Reinstall the stock SPL and stock ROM and take it back under warranty - sounds like a hardware issue to me. I haven't read about anyone else with this problem and since you seem to have already tried most software related fixes I'd start looking at the hardware. Just wait until you lose sound one day and then take it back so they can see the problem first hand! I can't see anyone arguing with that.
I had the some problem, only once, and it was because of installing some cabs (I don't remember which ones, though). The speaker didn't work at all.
I suggest that you put a new lite firmware (Swift works great to me!) and try for some time
Well I've had the same problem and apparently UK Orange know that its a hardware fault and are replacing my handset tomorrow.
I've tried every rom going and every radio going and still had the problem which definately suggests its hardware fault.
If you can I'd return it to your sim provider and get a replacement.
Still no solution
I just returned the phone to the shop. I'll keep you posted...
I had the same issue, returned it to the shop.
They will swap it with another one since it's a hardware fault.
Same problem. I send back Diamond to HTC.
I hope that they'll change it with another without problem.
I had the same problem with one of the early unbranded Diamonds. HTC Europe replaced it as being a sort of DOA (dead on arrival) without any restriction. It took some weeks but all ended well!
wondering if someone can help, i have my old Diamond kicking about and wifes m700 just died, cant afford to repair it so was hoping to just give her my old phone,
However being orange its locked, can onyone help unlocking it so it works with o2.
thanks
Has anyone had this problem before? My phones been fine for ages and it just started doing it one day. I'm getting really sick of using the screen to type messages etc.
I can re-enable the phones service by going to the comms manager and toggling
"Phone" off then on again. Don't know whats going on. I tried doing a hard reset but it didn't fix the problem.
Any help is greatly appreciated!
Mike
tytn ii signal drop when slider opens and sending sms
I'm having the same problem too and thought that it was only unique to my phone. Whenever i slide the phone open and trued to send a sms the phone signal just goes..We need help anyone.
flex problem...
that would be a flex problem..i suggest you replace your flex..your mother board to LCD flex had been cut in some ways..had that problem way back and i consulted a technician, we had to replace the flex and the problem was solve..hope it helps..
Sorry to bring up an old thread, but would this be what I need to fix the flex problem?
HTC TyTN II/P4550 Kaiser Flex Sim Card Slot Repair Part
(from ebay, the forums won't let me post a link to it)
Cheers
Mike