Database Develop

radio images and AT&T Nexus One

I've dug around for an answer for two days now and havent found any insight to this question
If i flash my phone to one of the froyo radios, will it screw up the phone simply because the froyo roms like Kangorama require the froyo radio?
Im asking because i kno that the FRF50 and even the 72 was for Tmobile only..the leofroyo rom works great because there is no radio attachment to it, but I want to use kangorama..
any help would be greaT!
thanks

I rooted my AT&T Nexus one for CyanogenMod 5.08 over the weekend.
CyanogenMod also needs Froyo Radio (Radio Firmware: FRF50 (FROYO RADIO, REQUIRED!) http://android.chemlab.org/android/nexus/radio-4.06.00.12_7.img)
My phone is running totally smooth. No network problem - no 3G issues.

bluezz said:
I rooted my AT&T Nexus one for CyanogenMod 5.08 over the weekend.
CyanogenMod also needs Froyo Radio (Radio Firmware: FRF50 (FROYO RADIO, REQUIRED!) http://android.chemlab.org/android/nexus/radio-4.06.00.12_7.img)
My phone is running totally smooth. No network problem - no 3G issues.
Click to expand...
Click to collapse
alright so ive been up trying to solve this problem...
I upgraded to 5.0.8 and i need the radio. i clicked on your link before but got all the code...
what do you do with this???
its just a constant loading page of code, i must be doing something wrong?

link works fine for me

icon57 said:
link works fine for me
Click to expand...
Click to collapse
im using safari on a mac, maybe thats why?

it was definitely safari... i just installed chrome. its nice. btw, how would i go about updating the radio? when its done downloading just rename it to update.zip?

No. Use fastboot to flash the radio.

prettyboy85712 said:
No. Use fastboot to flash the radio.
Click to expand...
Click to collapse
****.. i definitely forgot how to do that

zachthemaster said:
alright so ive been up trying to solve this problem...
I upgraded to 5.0.8 and i need the radio. i clicked on your link before but got all the code...
what do you do with this???
its just a constant loading page of code, i must be doing something wrong?
Click to expand...
Click to collapse
Right-click the link --> Save As / Save Target / Save Link As / something similar
Also, there are radio update instructions here.

thanks for the directions mate, now, if i have a mac does it matter? installing all the necessary components for this to work? and is there a way to flash it just using the sd card?thx

zachthemaster said:
thanks for the directions mate, now, if i have a mac does it matter? installing all the necessary components for this to work? and is there a way to flash it just using the sd card?thx
Click to expand...
Click to collapse
As long as you have the Android SDK, it should work for ya, though the command may be "fastboot-mac" or something instead.
If you want to flash just using the SD card, you'll need to find an update.zip of the radio image. I don't have a link to one of those at this point.
edit: here ya go: http://forum.xda-developers.com/showpost.php?p=6784858&postcount=1006
Just flash this from recovery.

thank you so much. !!!

Unrevoked forever + radio update

Can radios be flashed with UF at anytime now with an update.zip?
Also where is a zip file for the 2.15 radio or is there anyone willing to share? It's not the same as the evo's is it?
Sent from my ADR6300 using Tapatalk

To flash:
1. Place PB31IMG.zip to root of SD card
2. Power down phone
3. Press volume down and power at same time
4. It will ask to update...press volume UP for yes
5. It will ask for reboot...press volume UP for yes
Once done...enjoy.

bradatz said:
Can radios be flashed with UF at anytime now with an update.zip?
Also where is a zip file for the 2.15 radio or is there anyone willing to share? It's not the same as the evo's is it?
Click to expand...
Click to collapse
The file download for the radio is in the Unrevoked forever thread.
Sent from my rooted Incrediblę

tats_06 said:
To flash:
1. Place PB31IMG.zip to root of SD card
2. Power down phone
3. Press volume down and power at same time
4. It will ask to update...press volume UP for yes
5. It will ask for reboot...press volume UP for yes
Once done...enjoy.
Click to expand...
Click to collapse
i thought with S-OFF, we can flash radio with CWM? also, do i just rename the radio OTA to PB31IMG(.zip)?
with s-off, i can flash the radio anytime i want with any rom i want? without going back to the unroot stock rom?

zeke1988 said:
i thought with S-OFF, we can flash radio with CWM? also, do i just rename the radio OTA to PB31IMG(.zip)?
with s-off, i can flash the radio anytime i want with any rom i want? without going back to the unroot stock rom?
Click to expand...
Click to collapse
It already saves it as PB31IMG.zip....so just move it to root and go on with process.

That's for the splash and does not update radio. I've installed that and the update.zip and still have 2.05
Sent from my ADR6300 using Tapatalk

bradatz said:
That's for the splash and does not update radio. I've installed that and the update.zip and still have 2.05
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
He said the thread, not the wiki.

I honestly don't know what I'm doing wrong, i have the pb31img.zip(radio update) on root of sd did the whole power down and power on with volume(down) and when i get to hboot it has
fastboot
recovery
clear storage
simlock
after 2 seconds or so it does this:
sd checking...
loading...pb31diag.zip
no image
loading...pb31diag.nbh
no image or wrong image
loading...pb31img.zip
no image
loading...pb31img.nbh
no image or wrong image
so does anyone know what the problem is?

Sac's Droid said:
I honestly don't know what I'm doing wrong, i have the pb31img.zip(radio update) on root of sd did the whole power down and power on with volume(down) and when i get to hboot it has
fastboot
recovery
clear storage
simlock
after 2 seconds or so it does this:
sd checking...
loading...pb31diag.zip
no image
loading...pb31diag.nbh
no image or wrong image
loading...pb31img.zip
no image
loading...pb31img.nbh
no image or wrong image
so does anyone know what the problem is?
Click to expand...
Click to collapse
Make sure the sdcard is formatted as fat32 and that the zip name is exactly "PB32IMG.zip", exact casing and make sure also that its not .zip.zip

OK i just reformatted the sd card to FAT32 and the file i downloaded was PB31IMG, i don't have an extra .zip, that's common mistake for me to do so it was first thing to check. ok so that fixed it. i must not have had it formatted correctly, its whatever it was stock
edit: mrozzeh and the rest of the unrevoked team, i would like to say thank you, and thanks for the personal help too.

Sac's Droid said:
OK i just reformatted the sd card to FAT32 and the file i downloaded was PB31IMG, i don't have an extra .zip, that's common mistake for me to do so it was first thing to check. ok so that fixed it. i must not have had it formatted correctly, its whatever it was stock
edit: mrozzeh and the rest of the unrevoked team, i would like to say thank you, and thanks for the personal help too.
Click to expand...
Click to collapse
Anytime. (10 characters blah)

Hold the optical pad and the power button...not the vol down key and give it a shot

Radio update isn't working for me. Saved PB31IMG.zip to the root of my FAT32formatted SD card, rebooted, it found the PB31IMG.zip file, went though the loading process, got the point where it said "checking" and then went back to the menu without loading the update. I've downloaded the radio update twice with the same results. I currently have the 2.05.00.06.11 radio but have not yet installed s -off. Do I need to do that first?
Any other suggestions?
EDIT: Nevermind, I installed the unrevoked forever s -off patch and the radio update seems to be installing now.
EDIT 2: Radio update updates kernal to .32 correct?

Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.

Milton1964 said:
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Click to expand...
Click to collapse
Very bad idea...you may end up with a brick using a ROM from a different phone.

Milton1964 said:
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Click to expand...
Click to collapse
NO
this is not a good idea, junior

jdkoreclipse said:
Is that a definate? I know about bricks annd stuff but in curious.
Ps im not noob
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
how bout the f-in hardware drivers? would that work....
like a napalm full of facepalm

Thanks for the reply. don't want to brink my phone. loving it with all the new updates that are. Thanks again.

Milton1964 said:
Thanks for the reply. don't want to brink my phone. loving it with all the new updates that are. Thanks again.
Click to expand...
Click to collapse
no problem.
(wishful thinking: I wish we could cause Bugless Beast on a Dinc would be pretty awesome)

obededom said:
no problem.
(wishful thinking: I wish we could cause Bugless Beast on a Dinc would be pretty awesome)
Click to expand...
Click to collapse
What just happened to Shadowmite's Unrevoked Forever post in Development. It disappeared?

[RADIO] NS4G Radio image

For those of you that flashed a bad radio to your NS4G, there is a fix!
Many thanks go out to Netarchy for relentlessly trying to fix my radio, and Shabbypenguin for supply Netarchy with his phone images both of them did a lot of work just to get my phone operational again Thank you very much!
Attached is the signed zip for you to flash in recovery. now listen very carefully before you complain that this didn't work for you. It did not work for me either, but it just may work for some people to flash in recovery, that is why i'm supplying a signed zip for you. What I had to do to get this to work is to unzip the file. inside there is a file called "radio.pr.img" boot into your bootloader and use the following fastboot command
Code:
fastboot flash radio radio.pr.img
that worked for me and hopefully it will work for anyone else that flashes a bad image.
Once again thank you to Shabbypenguin and Netarchy, and anyone else that may have helped out.

Is this the stock radio that comes with it?
Sent from my Nexus S

Vandam500 said:
Is this the stock radio that comes with it?
Sent from my Nexus S
Click to expand...
Click to collapse
This is the stock radio yes.

wait i did what?

shabbypenguin said:
wait i did what?
Click to expand...
Click to collapse
i was under the impression that the image was from your phone...? either way netarchy and i used the irc channel you made so you still helped

joebags said:
i was under the impression that the image was from your phone...? either way netarchy and i used the irc channel you made so you still helped
Click to expand...
Click to collapse
Nah, the image that fixed you was the radio image extracted from the OTA ;D

joebags said:
For those of you that flashed a bad radio to your NS4G, there is a fix!
Many thanks go out to Netarchy for relentlessly trying to fix my radio, and Shabbypenguin for supply Netarchy with his phone images both of them did a lot of work just to get my phone operational again Thank you very much!
Attached is the signed zip for you to flash in recovery. now listen very carefully before you complain that this didn't work for you. It did not work for me either, but it just may work for some people to flash in recovery, that is why i'm supplying a signed zip for you. What I had to do to get this to work is to unzip the file. inside there is a file called "radio.pr.img" boot into your bootloader and use the following fastboot command
Code:
fastboot flash radio radio.pr.img
that worked for me and hopefully it will work for anyone else that flashes a bad image.
Once again thank you to Shabbypenguin and Netarchy, and anyone else that may have helped out.
Click to expand...
Click to collapse
I flashed this on my i9020 and my phone exploded. What should I do?
Sent from my Nexus S 8g using XDA App

thebowers131 said:
I flashed this on my i9020 and my phone exploded. What should I do?
Sent from my Nexus S 8g using XDA App
Click to expand...
Click to collapse
Was it next to your face? If so plead upload pics of the carnage...
Sent from my Nexus S 4G using XDA Premium App

Cool, thanks for the fix! This means we should be able to use SuperASOP 8.0 and flash the radio...in theory anyway.

Damn you can't brick this phone by flashing the wrong radio????
Sent from my Nexus S 4G using XDA App

Damn you can't brick this phone by flashing the wrong radio????
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Yes u can. Flash only nexus s 4g radio!
Uncle Jimmy says hello

i tried this in fastboot. it went though but did not fix my issue

i tried this in fastboot. it went though but did not fix my issue
Click to expand...
Click to collapse
What issue are you having?
Uncle Jimmy says hello

So can we use this with the SuperAsop rom?

Does anyone know if fastboot oem listpartitions work with this phone? Not at my pc right now. I was wondering which partitions were which. I dumped every image, 7, and i have one that is 13.5mb which i think is the radio that this phone came with. Also i wanna find out which is wimax
Uncle Jimmy says hello

So I installed SuperASOP 8.0 and then tried flashing the zip in recovery and pushing the img file via ADB and still have no radio. So it looks like no we can't use SuperASOP yet.

no superaosp doesnt have the cdma/wimax stuff, it was added to teh aosp source yesterday
http://groups.google.com/group/android-building/browse_thread/thread/d9f5c6b4703df022

phone will boot fine its unlocked and has cmw 3.0.2.4. long story short i unlocked the phone using greggs method late last night every thing was fine 3g worked ran ti back to recover my apps from my evo and went to bed. this morning gf said she tried to txt me but none came though so i did a prl and profile update they both failed no i noticed no 3g no cell service in a panic i flashed the NsS 4g decodx rom (without a back up stupidly) no luck fashed this in fastboot. it took but still no luck
im going to staet a help post
please pm if you think you can help

just fair warning you shouldnt post in anothers thread and then go make a thread about it, anyways there is the stock files on the dev forum for the ns4g download that and install it. then run the program it installed, it will get you back to 100% stock

shabbypenguin said:
just fair warning you shouldnt post in anothers thread and then go make a thread about it, anyways there is the stock files on the dev forum for the ns4g download that and install it. then run the program it installed, it will get you back to 100% stock
Click to expand...
Click to collapse
i just tryed that comp i got to the part where the you plug the phone to my comp and i would not reconize the phone. the computer will programe will not.

[Q] Manually flash a RUU?

Is it safe/possible to flash a RUU using this guide? My phone doesn't let me install the Optus RUU saying: "Model ID Incorrect".

Nope, not with out modifying the file and adding update scripts
sent from my Google Nexus 12! yup I'm from the future

mark manning said:
Nope, not with out modifying the file and adding update scripts
sent from my Google Nexus 12! yup I'm from the future
Click to expand...
Click to collapse
are you sure? Then how can we flash radio without scripts? Can't I just flash all the partitions one by one without rebooting?

charch said:
are you sure? Then how can we flash radio without scripts? Can't I just flash all the partitions one by one without rebooting?
Click to expand...
Click to collapse
Pretty sure, you can try but I highly doubt it works.
I have never flashed a radio from recovery without it being modified. As for it having an update script idk but I would have to assume so
sent from my Google Nexus 12! yup I'm from the future

mark manning said:
Pretty sure, you can try but I highly doubt it works.
I have never flashed a radio from recovery without it being modified. As for it having an update script idk but I would have to assume so
sent from my Google Nexus 12! yup I'm from the future
Click to expand...
Click to collapse
Is there a chance it'll brick my phone though? :-S I dont want to kill it... and I've flashed the radio from this ruu using "fastboot flash radio radio.img", so why wouldn't it work? if I only flash the system and data partitions, I should be safe from bricks, right?

Idk I don't use fastboot unless I have to. I haven't ever flashed anything besides a recovery from there. There is always a chance of bricking your phone when flashing something.
Chances are if you flash anything in an ruu your just gonna loose root. Wait til a dev gets his hands on it or look up how to use the android kitchen.
sent from my Google Nexus 12! yup I'm from the future

Root is SUPER easy to regain (just flash the root.zip in recovery)... and everything is flashed through fastboot on the Incredible S... except custom roms ofcourse.

charch said:
Root is SUPER easy to regain (just flash the root.zip in recovery)... and everything is flashed through fastboot on the Incredible S... except custom roms ofcourse.
Click to expand...
Click to collapse
If its an unofficial ruu that zip might not give your root back. Also if you have to flash custom roms from recovery, what makes you think this would be any different.?
sent from my Google Nexus 12! yup I'm from the future

OTA Update

Here's the zip of the OTA that was pushed out. It won't install through either CWM or TWRP, so can someone who's more knowledgeable in these matters make it flashable?
https://dl.dropboxusercontent.com/u/821854/OTAPkg.zip
And in case it helps, here's the log from CWM from trying to flash it manually:
https://dl.dropboxusercontent.com/u/821854/recovery.log
And yes, as with any OTA, you run the risk of losing root, etc. But for me, I really don't care. I've even tried pushing the included stock recovery, but it doesn't work like this. You get a phone with an exclamation point over it (I'm sure you all know what I'm talking about) when you try to boot into that recovery. A quick push of TWRP back onto the phone fixed that error, but I still can't flash the update, obviously. Anyone want to take a crack at it?
Thanks to nuclear_eclipse for getting this and the log for us!

chrisliphart said:
I've even tried pushing the included stock recovery, but it doesn't work like this. You get a phone with an exclamation point over it (I'm sure you all know what I'm talking about) when you try to boot into that recovery.
Click to expand...
Click to collapse
That symbol just means that it doesn't know what file to use for the update; this is part of what get's communicated somehow from the OS to the recovery during reboot, but I'm not familiar enough with the way recoveries work to know how to trigger that myself. I would assume this is a similar mechanism to how ROM Manager et al can tell CWM/TWRP what to flash.

nuclear_eclipse said:
That symbol just means that it doesn't know what file to use for the update; this is part of what get's communicated somehow from the OS to the recovery during reboot, but I'm not familiar enough with the way recoveries work to know how to trigger that myself. I would assume this is a similar mechanism to how ROM Manager et al can tell CWM/TWRP what to flash.
Click to expand...
Click to collapse
That makes total sense. I guess it's not automatically checking the folder that Software Update puts it in. I've got another 22 hours until I can get Software Update to check again. I'll push the stock recovery before I do that, unless someone makes this flashable through TWRP or CWM before then.

In my stock Rom thread there are new files up. They are the ota roms. So if you are running stock, download the odex one ending in 1.08 and flash in recovery, no need to wipe data. Then pull boot.img and fastboot flash it. You now have the ota software. I will post instructions to upgrade the firmware that came with the ota
Sent from my M7 using xda premium

jmz said:
In my stock Rom thread there are new files up. They are the ota roms. So if you are running stock, download the odex one ending in 1.08 and flash in recovery, no need to wipe data. Then pull boot.img and fastboot flash it. You now have the ota software. I will post instructions to upgrade the firmware that came with the ota
Sent from my M7 using xda premium
Click to expand...
Click to collapse
Rooted and all! Thank you sir!

OTA wich version
Does anyone use it, what does it include, will upgrade to jelly bean 4.2 or will stay on 4.1 I mean it was posted but no one actually tell us what to do with that?

henry_acevedo said:
Does anyone use it, what does it include, will upgrade to jelly bean 4.2 or will stay on 4.1 I mean it was posted but no one actually tell us what to do with that?
Click to expand...
Click to collapse
Its just a hboot patch I think. No serious software update. So yes still android 4.1
Sent from my HTC first using XDA Premium 4 mobile app

russian392 said:
Its just a hboot patch I think. No serious software update. So yes still android 4.1
Sent from my HTC first using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Will be ever get Jelly Bean 4.2 or kit kat.. not even a decent rom is out there, i really want to know how to port but i don't know, why android cannot be be like windows ahahaah, download drivers for internet and taran,,,:crying: